Convenient method for epoxidation of alkenes using aqueous hydrogen peroxide

[reaction: see text] The complex [Ru(tpy)(pydic)] (1a) is an active catalyst for epoxidation of alkenes by aqueous 30% hydrogen peroxide in tertiary alcohols. The protocol is simple to operate and gives the corresponding epoxides in good to excellent yields. Chiral enantiopure [Ru(tpy)(pydic)] complexes have been synthesized and successfully applied in this procedure.     

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part I: synthesis of new chiral N,N,N-tridentate pybox and pyboxazine ligands and their ruthenium complexes

The synthesis of chiral tridentate N,N,N-pyridine-2,6-bisoxazolines 3 (pybox ligands) and N,N,N-pyridine-2,6-bisoxazines 4 (pyboxazine ligands) is described in detail. These novel ligands constitute a useful toolbox for the application in asymmetric catalysis. Compounds 3 and 4 are conveniently prepared by cyclization of enantiomerically pure alpha- or beta-amino alcohols with dimethyl pyridine-2,6-dicarboximidate. The corresponding ruthenium complexes are efficient asymmetric epoxidation catalysts and have been prepared in good yield and fully characterized by spectroscopic means. Four of these ruthenium complexes have been characterized by X-ray crystallography. For the first time the molecular structure of a pyboxazine complex [2,6-bis-[(4S)-4-phenyl-5,6-dihydro-4H-[1,3]oxazinyl]pyridine](pyridine-2,6-dicarboxylate)ruthenium (S)-2 aa, is presented.     

Synthesis of a polymer–ruthenium complex Ru(pbbp)(pydic) and its catalysis in the oxidation of secondary alcohols with TBHP as oxidant

A polymer–ruthenium complex Ru(pbbp)(pydic) was synthesized from the reaction of poly-2,6-bis(benzimidazolyl)pyridine (pbbp) with RuCl₃ and disodium pyridine-2,6-dicarboxylate (pydic). The Ru(pbbp)(pydic) was characterized thoroughly by spectroscopic methods. ICP analysis revealed that the percentage of complexation of 2,6-bis(benzimidazolyl)pyridine unit in pbbp was about 83%. The complex was tested as a heterogeneous catalyst for the oxidation of secondary alcohols to their corresponding carbonyl compounds in solvent-free conditions using aqueous tert-butyl hydroperoxide as oxidant. The developed catalytic system exhibited high activity and broad functional group compatibility, allowing a variety of secondary alcohols, including substituted secondary benzylic alcohols and secondary aliphatic ones, to be oxidized to the corresponding ketones in high yields. This Ru(pbbp)(pydic) could be recycled for several times, but it dissolved in part in the reaction mixture during the catalytic run leading to gradual deactivation of the catalyst with repeated runs.     

Biomimetic iron-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide

A novel and general biomimetic non-heme Fe-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide is reported herein. The catalyst consists of ferric chloride hexahydrate (FeCl(3)6 H(2)O), pyridine-2,6-dicarboxylic acid (H(2)(pydic)), and readily accessible chiral N-arenesulfonyl-N'-benzyl-substituted ethylenediamine ligands. The asymmetric epoxidation of styrenes with this system gave high conversions but poor enantiomeric excesses (ee), whereas larger alkenes gave high conversions and ee values. For the epoxidation of trans-stilbene (1 a), the ligands (S,S)-N-(4-toluenesulfonyl)-1,2-diphenylethylenediamine ((S,S)-4 a) and its N'-benzylated derivative ((S,S)-5 a) gave opposite enantiomers of trans-stilbene oxide, that is, (S,S)-2 a and (R,R)-2 a, respectively. The enantioselectivity of alkene epoxidation is controlled by steric and electronic factors, although steric effects are more dominant. Preliminary mechanistic studies suggest the in situ formation of several chiral Fe-complexes, such as [FeCl(L*)(2)(pydic)]HCl (L*=(S,S)-4 a or (S,S)-5 a in the catalyst mixture), which were identified by ESIMS. A UV/Vis study of the catalyst mixture, which consisted of FeCl(3)6 H(2)O, H(2)(pydic), and (S,S)-4 a, suggested the formation of a new species with an absorbance peak at lambda=465 nm upon treatment with hydrogen peroxide. With the aid of two independent spin traps, we could confirm by EPR spectroscopy that the reaction proceeds via radical intermediates. Kinetic studies with deuterated styrenes showed inverse secondary kinetic isotope effects, with values of k(H)/k(D)=0.93 for the beta carbon and k(H)/k(D)=0.97 for the alpha carbon, which suggested an unsymmetrical transition state with stepwise O transfer. Competitive epoxidation of para-substituted styrenes revealed a linear dual-parameter Hammett plot with a slope of 1.00. Under standard conditions, epoxidation of 1 a in the presence of ten equivalents of H(2) (18)O resulted in an absence of the isotopic label in (S,S)-2 a. A positive nonlinear effect was observed during the epoxidation of 1 a in the presence of (S,S)-5 a and (R,R)-5 a.     

Dichlororuthenium(IV) complex of meso-tetrakis(2,6-dichlorophenyl)porphyrin: active and robust catalyst for highly selective oxidation of arenes, unsaturated steroids, and electron-deficient alkenes by using 2,6-dichloropyridine N-oxide

[Ru(IV)(2,6-Cl2tpp)Cl2], prepared in 90 % yield from the reaction of [Ru(VI)(2,6-Cl2tpp)O2] with Me3SiCl and structurally characterized by X-ray crystallography, is markedly superior to [Ru(IV)(tmp)Cl2], [Ru(IV)(ttp)Cl2], and [Ru(II)(por)(CO)] (por=2,6-Cl2tpp, F20-tpp, F28-tpp) as a catalyst for alkene epoxidation with 2,6-Cl2pyNO (2,6-Cl2tpp=meso-tetrakis(2,6-dichlorophenyl)porphyrinato dianion; tmp=meso-tetramesitylporphyrinato dianion; ttp=meso-tetrakis(p-tolyl)porphyrinato dianion; F20-tpp=meso-tetrakis(pentafluorophenyl)porphyrinato dianion; F28-tpp=2,3,7,8,12,13,17,18-octafluoro-5,10,15,20-tetrakis(pentafluorophenyl)porphyrinato dianion). The "[Ru(IV)(2,6-Cl2tpp)Cl2]+2,6-Cl2pyNO" protocol oxidized, under acid-free conditions, a wide variety of hydrocarbons including 1) cycloalkenes, conjugated enynes, electron-deficient alkenes (to afford epoxides), 2) arenes (to afford quinones), and 3) Delta5-unsaturated steroids, Delta4-3-ketosteroids, and estratetraene derivatives (to afford epoxide/ketone derivatives of steroids) in up to 99 % product yield within several hours with up to 100 % substrate conversion and excellent regio- or diastereoselectivity. Catalyst [Ru(IV)(2,6-Cl2tpp)Cl2] is remarkably active and robust toward the above oxidation reactions, and turnover numbers of up to 6.4x10(3), 2.0x10(4), and 1.6x10(4) were obtained for the oxidation of alpha,beta-unsaturated ketones, arenes, and Delta5-unsaturated steroids, respectively.     

Highly efficient asymmetric epoxidation of alkenes with a D(4)-symmetric chiral dichlororuthenium(IV) porphyrin catalyst.

A dichlororuthenium(IV) complex of 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,2:5,8-dimethanoanthrance-9-yl]porphyrin, [Ru(IV)(D(4)-Por)Cl(2)] (1), was prepared by heating [Ru(II)(D(4)-Por)(CO)(MeOH)] (2) in refluxing CCl(4). Complex 1 is characterized by (1)H NMR (paramagnetically shifted pyrrolic protons at delta(H) = -52.3 ppm), FAB-mass spectroscopies, and magnetic susceptibility measurement (mu(eff) = 3.1 mu(B)). The ruthenium complex exhibits remarkable catalytic activity toward enantioselective alkene epoxidation using 2,6-dichloropyridine N-oxide (Cl(2)pyNO) as terminal oxidant. The Ru(IV)-catalyzed styrene epoxidation is achieved within 2 h (versus 48 h for the 2-catalyzed reaction), and optically active styrene oxide was obtained in 69% ee and 84% yield (875 turnovers). Likewise, substituted styrenes and some conjugated cis-disubstituted alkenes (e.g., cis-beta-methylstyrene, cis-1-phenyl-3-penten-1-yne, 1,2-dihydronaphthalene, and 2,2-dimethylchromenes) are converted effectively to their organic epoxides in 50-80% ee under the Ru(IV)-catalyzed conditions, and more than 850 turnovers of epoxides have been attained. When subjecting 1 to four repetitive uses by recharging the reaction mixture with Cl(2)pyNO and styrene, styrene oxide was obtained in a total of 2190 turnovers and 69% ee. UV-vis and ESI-mass spectral analysis of the final reaction mixture revealed that a ruthenium-carbonyl species could have been formed during the catalytic reaction, leading to the apparent catalyst deactivation. We prepared a heterogeneous chiral ruthenium porphyrin catalyst by immobilizing 1 into sol-gel matrix. The heterogeneous catalyst is highly active toward asymmetric styrene epoxidation producing styrene oxide in 69% ee with up to 10,800 turnovers being achieved. The loss of activity of the Ru/sol-gel catalyst is ascribed to catalyst leaching and/or deactivation. On the basis of Hammett correlation (rho(+) = -1.62, R = 0.99) and product analysis, a dioxoruthenium(VI) porphyrin intermediate is not favored.     

Synthetic, spectral and catalytic activity studies of ruthenium bipyridine and terpyridine complexes: Implications in the mechanism of the ruthenium(pyridine-2,6-bisoxazoline)(pyridine-2,6-dicarboxylate)-catalyzed asymmetric epoxidation of olefins utilizing H2O2

Various Ru(L₁)(L₂) (1) complexes (L₁ = 2,2′-bipyridines, 2,2′:6′,2″-terpyridines, 6-(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl-2,2′-bipyridinyl or 2,2′-bipyridinyl-6-carboxylate; L₂ = pyridine-2,6-dicarboxylate, pyridine-2-carboxylate or 2,2′-bipyridinyl-6-carboxylate) have been synthesized (or in situ generated) and tested on epoxidation of olefins utilizing 30% aqueous H₂O₂. The complexes containing pyridine-2,6-dicarboxylate show extraordinarily high catalytic activity. Based on the stereoselective performance of chiral ruthenium complexes containing non-racemic 2,2′-bipyridines including 6-[(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl]-[2,2′]bipyridinyl new insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed enantioselective epoxidation are proposed. In addition, a simplified protocol for epoxidation of olefins using urea hydrogen peroxide complex as oxidizing agent has been developed.     

Rhodium(I) and Rhodium(III) complexes containing the chiral ligand 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox): an unprecedented monohapto coordination of pybox

The complex [Rh(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (1) has been prepared by reaction of the precursor [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox), CO, and NaPF(6). Complex 1 reacts with monodentate phosphines to give the complexes [Rh(kappa(1)-N-pybox)(CO)(PR(3))(2)][PF(6)] (R(3) = MePh(2) (2), Me(2)Ph (3), (C(3)H(5))Ph(2) (4)), which show a previously unseen monodentate coordination of pybox. Complex 1 undergoes oxidative addition reactions with iodine and CH(3)I leading to the complexes [RhI(R)(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (R = I (5); R = CH(3) (6)). Furthermore, a new allenyl Rh(III)-pybox complex of formula [Rh(CH=C=CH(2))Cl(2)(kappa(3)-N,N,N-pybox)] (7) has been synthesized by a one-pot reaction from [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), pybox, and an equimolar amount of propargyl chloride.     

New insights into the mechanism of oxodiperoxomolybdenum catalysed olefin epoxidation and the crystal structures of several oxo-peroxo molybdenum complexes

[Mo(O)(O(2))(2)(L)(2)] compounds (L = pz, pyrazole; dmpz, 3,5-dimethylpyrazole) were reacted stoichiometrically, in the absence of an oxidant, with cis-cyclooctene in an ionic liquid medium where selective formation of the corresponding epoxide was observed. However, this oxo-transfer reaction was not observed for some other olefins, suggesting that alternative reaction pathways exist for these epoxidation processes. Subsequently, DFT studies investigating the oxodiperoxomolybdenum catalysed epoxidation model reaction for ethylene with hydrogen peroxide oxidant were performed. The well known Sharpless mechanism was first analysed for the [Mo(O)(O(2))(2)(dmpz)(2)] model catalyst and a low energy reaction pathway was found, which fits well with the observed experimental results for cis-cyclooctene. The structural parameters of the computed dioxoperoxo intermediate [Mo(O)(2)(O(2))(dmpz)(2)] in the Sharpless mechanism compare well with those found for the same moiety within the [Mo(4)O(16)(dmpz)(6)] complex, for which the full X-ray report is presented here. A second mechanism for the model epoxidation reaction was theoretically investigated in order to clarify why some olefins, which do not react stoichiometrically in the absence of an oxidant, showed low level conversions in catalytic conditions. A Thiel-type mechanism, in which the oxidant activation occurs prior to the oxo-transfer step, was considered. The olefin attack of the hydroperoxide ligand formed upon activation of hydrogen peroxide with the [Mo(O)(O(2))(2)(dmpz)(2)] model catalyst was not possible to model. The presence of two dmpz ligands coordinated to the molybdenum centre prevented the olefin attack for steric reasons. However, a low energy reaction pathway was identified for the [Mo(O)(O(2))(2)(dmpz)] catalyst, which can be formed from [Mo(O)(2)(O(2))(dmpz)(2)] by ligand dissociation. Both mechanisms, Sharpless- and Thiel-type, were found to display comparable energy barriers and both are accessible alternative pathways in the oxodiperoxomolybdenum catalysed olefin epoxidation. Additionally, the molecular structures of [Mo(O)(O(2))(2)(H(2)O)(pz)] and [Hdmpz](4)[Mo(8)O(22)(O(2))(4)(dmpz)(2)]·2H(2)O and the full X-ray report of [Mo(O)(O(2))(2)(pz)(2)] are also presented.     

Preparation, structure characterization, and oxidation activity of ruthenium complexes with tripodal ligands bearing noncovalent interaction sites

Ruthenium(II/III) complexes with tripodal tris(pyridylmethyl)amine ligands bearing one, two, or three pivalamide groups (MPPA, BPPA, TPPA: amide-series ligands) or neopentylamine ones (MNPA, BNPA, TNPA: amine-series ligands) at the 6-position of the pyridine ring have been synthesized and structurally characterized. The X-ray structure analyses of the single crystals of these complexes reveal that they complete an octahedral geometry with the tripodal ligand and some monodentate ligands. The amide-series ligands prefer to form a Ru(II) complex, while the amine-series ones give a Ru(III) complex. In the presence of PhIO oxidant, the catalytic activities for epoxidation of olefins, hydroxylation of alkane, and dehydrogenation of alcohol have been investigated using the six ruthenium complexes [Ru(II)(tppa)Cl(2)] (1), [Ru(III)(tnpa)Cl(2)]PF(6) (2), [Ru(II)(bppa)Cl]PF(6) (3), [Ru(III)(bnpa)Cl(2)]PF(6) (4), [Ru(II)(mppa)Cl]PF(6) (5), and [Ru(III)(mnpa)Cl(2)]PF(6) (6). Among them, the amide-series complexes, 1, 3, and 5, showed a higher epoxidation activity in comparison with the amine-series ones, 2, 4, and 6. On the other hand, the latter showed a higher reactivity for hydroxylation, allylic oxidation, and C=C bond cleavage reactions compared with the former. Such a complementary reactivity is interpreted by the character of the ruthenium-oxo species involving electronically equivalent formulas, Ru(V)=O and Ru(IV)-O.     

Structural determination of ruthenium-porphyrin complexes relevant to catalytic epoxidation of olefins

A reproducible synthesis of a competent epoxidation catalyst, [Ru(VI)(TPP)(O)2)] (TPP = tetraphenylporphyrin dianion), starting from [Ru(II)(TPP)(CO)L] (L = none or CH3OH), is described. The molecular structure of the complex was determined by using ab initio X-ray powder diffraction (XRPD) methods, and its solution behavior was in detail investigated by NMR techniques such as PGSE (pulsed field gradient spin-echo) measurements. [Ru(IV)(TPP)(OH)]2O, a reported byproduct in the synthesis of [Ru(VI)(TPP)(O)2], was synthesized in a pure form by oxidation of [Ru(II)(TPP)(CO)L] or by a coproportionation reaction of [Ru(VI)(TPP)(O)2] and [Ru(II)(TPP)(CO)L], and its molecular structure was then determined by XRPD analysis. [Ru(VI)(TPP)(O)2] can be reduced by dimethyl sulfoxide or by carbon monoxide to yield [Ru(II)(TPP)(S-DMSO)2] or [Ru(II)(TPP)(CO)(H2O)], respectively. These two species were characterized by conventional single-crystal X-ray diffraction analysis.     

Polyoxometalate catalysts: toward the development of green H2O2-based epoxidation systems

This paper describes the development of green, efficient H(2)O(2)-based epoxidation systems with three kinds of polyoxometalates: (i) a dinuclear peroxotungstate [W(2)O(3)(O(2))(4)(H(2)O)(2)](2-) (I), (ii) a divacant lacunary polyoxotungstate [gamma-SiW(10)O(34)(H(2)O)(2)]4 (II), (iii) and a divanadium-substituted polyoxotungstate [gamma-1,2-H(2)SiV(2)W(10)O(40)](4-) (III). The highly chemo-, regio-, and diastereoselective epoxidation of various allylic alcohols with only 1 equiv H(2)O(2) in water can be efficiently catalyzed by potassium salt of I (K-I). The catalyst K-I can be recycled with the retention of the catalytic performance. Protonation of a divacant lacunary polyoxotungstate [gamma-SiW(10)O(36)](8-) gives [gamma-SiW(10)O(34)(H(2)O)(2)](4-) (II) with two aquo ligands. The tetra-n-butylammonium salt of II (TBA-II) catalyzes epoxidation of common olefins including propylene with >or=99% selectivity to epoxide and >or=99% efficiency of H(2)O(2) utilization. The bis(mu-hydroxo)bridged dioxovanadium site in [gamma-1,2-H(2)SiV(2)W(10)O(40)](4-) (III) can also efficiently catalyze epoxidation of a variety of olefins with 1 equiv H(2)O(2). Notably, the system with III shows unique stereospecificity, diastereoselectivity, and regioselectivity for the epoxidation of cis/trans olefins, 3-substituted cyclohexenes, and nonconjugated dienes, respectively, which are quite different from those reported for epoxidation systems up to now. Furthermore, the heterogenization of the mentioned polyoxometalates can be achieved by using ionic liquid-modified SiO(2) as a support without loss of catalytic performance.     

The reactivity of N-heterocyclic carbenes and their precursors with [Ru(3)(CO)(12)

The ambient temperature reaction of the N-heterocyclic carbenes (NHCs) 1,3-dimesitylimidazol-2-ylidene (IMes) and 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IDipp) with the triruthenium cluster [Ru(3)(CO)(12)], in a 3 : 1 stoichiometric ratio, results in homolytic cleavage of the cluster to quantitatively afford the complexes [Ru(CO)(4)(NHC)] (; NHC = IMes, ; NHC = IDipp). Reaction of the 2-thione or hydrochloride precursors to IMes, i.e. S[double bond, length as m-dash]IMes and IMes.HCl, with the same triruthenium cluster affords the complexes [Ru(4)(mu(4)-S)(2)(CO)(9)(IMes)(2)] () and [Ru(4)(mu(4)-S)(CO)(10)(IMes)(2)] () (3 : 1 and 2 : 1 reaction), and [{Ru(mu-Cl)(CO)(2)(IMes)}(2)] () (3 : 1 reaction) respectively. By contrast, the complex [Ru(3)(mu(3)-S)(2)(CO)(7)(IMeMe)(2)] (), where IMeMe is 1,3,4,5-tetramethylimidazol-2-ylidene, is the sole product of the 2 : 1 stoichiometric reaction of S[double bond, length as m-dash]IMeMe with [Ru(3)(CO)(12)]. Compounds -, and have been structurally characterised by single crystal X-ray diffraction.     

Stoichiometric and catalytic reactivity of the N-heterocyclic carbene ruthenium hydride complexes [Ru(NHC)(L)(CO)HCl] and [Ru(NHC)(L)(CO)H(eta2-BH4)] (L=NHC, PPh3)

Thermolysis of [Ru(AsPh3)3(CO)H2] with the N-aryl heterocyclic carbenes (NHCs) IMes (1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or the adduct SIPr.(C6F5)H (SIPr=1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene), followed by addition of CH2Cl2, affords the coordinatively unsaturated ruthenium hydride chloride complexes [Ru(NHC)2(CO)HCl] (NHC=IMes , IPr , SIPr ). These react with CO at room temperature to yield the corresponding 18-electron dicarbonyl complexes . Reduction of and [Ru(IMes)(PPh3)(CO)HCl] () with NaBH4 yields the isolable borohydride complexes [Ru(NHC)(L)(CO)H(eta2-BH4)] (, L=NHC, PPh3). Both the bis-IMes complex and the IMes-PPh3 species react with CO at low temperature to give the eta1-borohydride species [Ru(IMes)(L)(CO)2H(eta1-BH4)] (L=IMes , PPh3), which can be spectroscopically characterised. Upon warming to room temperature, further reaction with CO takes place to afford initially [Ru(IMes)(L)(CO)2H2] (L=IMes, L=PPh3) and, ultimately, [Ru(IMes)(L)(CO)3] (L=IMes , L=PPh3). Both and lose BH3 on addition of PMe2Ph to give [Ru(IMes)(L)(L')(CO)H2](L=L'=PMe2Ph; L=PPh3, L'=PMe2Ph). Compounds and have been tested as catalysts for the hydrogenation of aromatic ketones in the presence of (i)PrOH and H2. For the reduction of acetophenone, catalytic activity varies with the NHC present, decreasing in the order IPr>IMes>SIMes.     

Paramagnetic precursors for supramolecular assemblies: selective syntheses, crystal structures, and electrochemical and magnetic properties of Ru2(O2CMe)4-n(formamidinate)nCl complexes, n = 1-4

Reactions of Ru(2)(O(2)CMe)(4)Cl with two formamidines, HDXyl(2,6)F = N,N'-di(2,6-xylyl)formamidine and HDAniF = N,N'-di(p-anisyl)formamidine, have been investigated with the idea of synthesizing compounds with a mixed set of ligands having different labilities to be used as precursors of paramagnetic, higher-order assemblies. Depending on the formamidine and the reaction conditions, several Ru(2)(5+) compounds of the type Ru(2)(O(2)CMe)(4)(-)(n)(DArF)(n)Cl (DArF = anion of an N,N'-diarylformamidine) have been isolated. With the bulky formamidine HXyl(2,6)F, the compounds Ru(2)(O(2)CMe)(3)(DXyl(2,6)F)Cl (1) and trans-Ru(2)(O(2)CMe)(2)(DXyl(2,6)F)(2)Cl (2) were obtained. From reactions with appropriate amounts of HDAniF in THF and in the presence of NEt(3) and LiCl, complexes of the general type Ru(2)(O(2)CMe)(4)(-)(n)(DArF)(n)Cl (n = 1-4) were selectively obtained. For n = 2, only the cis isomer was obtained. The choice of solvent in reactions of Ru(2)(O(2)CMe)(4)Cl and HDAniF is of great importance. Toluene favored the formation of the fully substituted Ru(2)(5+) complex Ru(2)(DAniF)(4)Cl (3), whereas MeOH resulted in a disproportionation reaction that gave the edge-sharing bioctahedral Ru(3+)Ru(3+) complex [trans-Ru(2)(mu-OMe)(2)(mu-O(2)CMe)(2)(HDAniF)(4)]Cl(2) (6) and the Ru(2)(4+) complex Ru(2)(DAniF)(4) (7). Complexes 6 and 7 with an Ru(2)(6+) and Ru(2)(4+) core, respectively, are diamagnetic, whereas all Ru(2)(5+) complexes are paramagnetic with sigma(2)pi(4)delta(2)(pi*delta*)(3) ground-state electronic configurations and large zero-field splitting contributions. All compounds show rich and complex electrochemical behavior.     

Ruthenium porphyrin catalyzed tandem sulfonium/ammonium ylide formation and [2,3]-sigmatropic rearrangement. A concise synthesis of (+/-)-platynecine

meso-Tetrakis(p-tolyl)porphyrinatoruthenium(II) carbonyl, [Ru(II)(TTP)(CO)], can effect intermolecular sulfonium and ammonium ylide formation by catalytic decomposition of diazo compounds such as ethyl diazoacetate (EDA) in the presence of allyl sulfides and amines. Exclusive formation of [2,3]-sigmatropic rearrangement products (70-80% yields) was observed without [1,2]-rearrangement products being detected. The Ru-catalyzed reaction of EDA with disubstituted allyl sulfides such as crotyl sulfide produced an equimolar mixture of anti- and syn-2-(ethylthio)-3-methyl-4-pentenoic acid ethyl ester. The analogous "EDA + N,N-dimethylcrotylamine" reaction afforded a mixture of anti- and syn-2-(N,N-dimethylamino)-3-methyl-4-pentenoic acid ethyl esters with a diastereoselectivity of 3:1. The observed catalytic activity of [Ru(II)(TTP)(CO)] for the ylide [2,3]-sigmatropic rearrangement is comparable to the reported examples involving [Rh(2)(CH(3)CO(2))(4)] and [Cu(acac)(2)] as catalyst. Similarly, cyclic sulfonium and ammonium ylides can be produced by intramolecular reaction of a diazo group tethered to allyl sulfides and amines under the [Ru(II)(TTP)(CO)]-catalyzed reaction conditions. The subsequent [2,3]-sigmatropic rearrangement of the cyclic ylides furnished 2-allyl-substituted sulfur and nitrogen heterocycles in good yields (>90%). By employing [Ru(II)(TTP)(CO)] as catalyst, the cyclic ammonium ylide [2,3]-sigmatropic rearrangement reaction was successfully applied for the total synthesis of (+/-)-platynecine starting from cis-2-butenediol.     

Theoretical study of photoinduced epoxidation of olefins catalyzed by ruthenium porphyrin

Epoxidation of olefin by [Ru(TMP)(CO)(O)](-) (TMP = tetramesitylporphine), which is a key step of the photocatalyzed epoxidation of olefin by [Ru(TMP)(CO)], is studied mainly with the density functional theory (DFT) method, where [Ru(Por)(CO)] is employed as a model complex (Por = unsubstituted porphyrin). The CASSCF method was also used to investigate the electronic structure of important species in the catalytic cycle. In all of the ruthenium porphyrin species involved in the catalytic cycle, the weight of the main configuration of the CASSCF wave function is larger than 85%, suggesting that the static correlation is not very large. Also, unrestricted-DFT-calculated natural orbitals are essentially the same as CASSCF-calculated ones, here. On the basis of these results, we employed the DFT method in this work. Present computational results show characteristic features of this reaction, as follows: (i) The epoxidation reaction occurs via carboradical-type transition state. Neither carbocation-type nor concerted oxene-insertion-type character is observed in the transition state. (ii) Electron and spin populations transfer from the olefin moiety to the porphyrin ring in the step of the C-O bond formation. (iii) Electron and spin populations of the olefin and porphyrin moieties considerably change around the transition state. (iv) The atomic and spin populations of Ru change little in the reaction, indicating that the Ru center keeps the +II oxidation state in the whole catalytic cycle. (v) The stability of the olefin adduct [Ru(Por)(CO)(O)(olefin)](-) considerably depends on the kind of olefin, such as ethylene, n-hexene, and styrene. In particular, styrene forms a stable olefin adduct. And, (vi) interestingly, the difference in the activation barrier among these olefins is small in the quantitative level (within 5 kcal/mol), indicating that this catalyst can be applied to various substrates. This is because the stabilities and electronic structures of both the olefin adduct and the transition state are similarly influenced by the substituent of olefin.     

Can [M(H)2(H2)(PXP)] Pincer Complexes (M=Fe,Ru, Os; X=N,O, S) Serve as Catalyst Lead Structures for NH3 Synthesis from N2 and H2?

The potential of pincer complexes [M(H)(2)(H(2))(PXP)] (M=Fe, Ru, Os; X=N, O, S) to coordinate, activate, and thus catalyze the reaction of N(2) with classical or nonclassical hydrogen centers present at the metal center, with the aim of forming NH(3) with H(2) as the only other reagent, was explored by means of DF (density functional) calculations. Screening of various complexes for their ability to perform initial hydrogen transfer to coordinated N(2) showed ruthenium pincer complexes to be more promising than the corresponding iron and osmium analogues. The ligand backbone influences the reaction dramatically: the presence of pyridine and thioether groups as backbones in the ligand result in inactive catalysts, whereas ether groups such as gamma-pyran and furan enable the reaction and result in unprecedented low activation barriers (23.7 and 22.1 kcal mol(-1), respectively), low enough to be interesting for practical application. Catalytic cycles were calculated for [Ru(H)(2)(H(2))(POP)] catalysts (POP=2,5-bis(dimethylphosphanylmethyl)furan and 2,6-bis(dimethylphosphanylmethyl)-gamma-pyran). The height of activation barriers for the furan system is somewhat more advantageous. Formation of inactive metal nitrides has not been observed. SCRF calculations were used to introduce solvent (toluene) effects. The Gibbs free energies of activation of the numerous single reaction steps do not change significantly when solvent is included. The reaction steps associated with the formation of the active catalyst from precursors [M(H)(2)(H(2))(PXP)] were also calculated. The otherwise inactive pyridine ligand system allows for the generation of the active catalyst species, whereas the ether ligand systems show activation barriers that could prohibit practical application. Consequently the generation of the active catalyst species needs to be addressed in further studies.     

Role of the NH2 functionality and solvent in terdentate CNN alkoxide ruthenium complexes for the fast transfer hydrogenation of ketones in 2-propanol

The reaction of [RuCl(CNN)(dppb)] (1; HCNN=6-(4-methylphenyl)-2-pyridylmethylamine) with NaOiPr in 2-propanol/C6D6 affords the alcohol adduct alkoxide [Ru(OiPr)(CNN)(dppb)].n iPrOH (5), containing the Ru-NH2 linkage. The alkoxide [Ru(OiPr)(CNN)(dppb)] (4) is formed by treatment of the hydride [Ru(H)(CNN)(dppb)] (2) with acetone in C6D6. Complex 5 in 2-propanol/C6D6 equilibrates quickly with hydride 2 and acetone with an exchange rate of (5.4+/-0.2) s(-1) at 25 degrees C, higher than that found between 4 and 2 ((2.9+/-0.4) s(-1)). This fast process, involving a beta-hydrogen elimination versus ketone insertion into the Ru-H bond, occurs within a hydrogen-bonding network favored by the Ru-NH2 motif. The cationic alcohol complex [Ru(CNN)(dppb)(iPrOH)](BAr(f)4) (6; Ar(f)=3,5-C6H3(CF3)2), obtained from 1, Na[BAr(f)4], and 2-propanol, reacts with NaOiPr to afford 5. Complex 5 reacts with either 4,4'-difluorobenzophenone through hydride 2 or with 4,4'-difluorobenzhydrol through protonation, affording the alkoxide [Ru(OCH(4-C6H4F)2)(CNN)(dppb)] (7) in 90 and 85 % yield of the isolated product. The chiral CNN-ruthenium compound [RuCl(CNN)((S,S)-Skewphos)] (8), obtained by the reaction of [RuCl2(PPh3)3] with (S,S)-Skewphos and orthometalation of HCNN in the presence of NEt3, is a highly active catalyst for the enantioselective transfer hydrogenation of methylaryl ketones (turnover frequencies (TOFs) of up to 1.4 x 10(6) h(-1) at reflux were obtained) with up to 89% ee. Also the ketone CF3CO(4-C6H4F), containing the strong electron-withdrawing CF3 group, is reduced to the R alcohol with 64% ee and a TOF of 1.5 x 10(4) h(-1). The chiral alkoxide [Ru(OiPr)(CNN)((S,S)-Skewphos)]n iPrOH (9), obtained from 8 and NaOiPr in the presence of 2-propanol, reacts with CF3CO(4-C6H4F) to afford a mixture of the diastereomer alkoxides [Ru(OCH(CF3)(4-C6H4F))(CNN)((S,S)-Skewphos)] (10/11; 74% yield) with 67% de. This value is very close to the enantiomeric excess of the alcohol (R)-CF3CH(OH)(4-C6H4F) formed in catalysis, thus suggesting that diastereoisomeric alkoxides with the Ru-NH2 linkage are key species in the catalytic asymmetric transfer hydrogenation reaction.     

1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-二吡啶基-二氯合钌化合物的合成

设计了由1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-三苯基膦-二氯合钌(7)和吡啶反应生成无膦型金属钌卡宾化合物1,3-二(2,6-二甲苯基)-2-四氢咪唑基-苯亚甲基-2-吡啶基-二氯合钌(8),8作为高效催化剂用于丙烯腈和烯丙基苯的交叉交互置换反应.新化合物7,8经核磁共振氢谱、碳谱和高分辨率质谱予以证实.