Highly conducting solid electrolytes based on poly (ethylene oxide-co-propylene oxide)

The conducting properties of solid electrolytes comprising random poly(ethylene oxide-co-propylene oxide) (of 84 : 16 monomer units mole ratio) and lithium, sodium, potassium, cesium, and rubidium salts have been studied. The systems containing some lithium or sodium salts achieved conductivity levels as high as 10^?5–10^?4 S/cm at ambient temperature and greater than 10^?3 S/cm at 100°C. However, the systems with rubidium and cesium salts exhibit conductivities a few orders of magnitude smaller. DSC studies show that the electrolytes studied are characterized by a high content of an amorphous phase (95–100%). It is suggested that the copolymer exhibits lower complexing abilities than that of poly(ethylene oxide), which results in a higher flexibility of electrolytes containing small cations and poor dissociation of the salts having large cations. © 1995 John Wiley & Sons, Inc.     

Ion Tunneling in Polymeric Solid Electrolytes for Batery and Electrochromic Display in the Dry State

Polymeric solid electrolytes which show bi-or single-ionic tunneling were prepared, and their unique ion conduction was applied for the design of some devices. Poly [(oligooxyethylene) methacrylatel] /MX hybrids and poly [(oligooxyethylene) methacrylate-co-methacrylic acid alkali metal salts] were prepared as typical models of those tunneling systems. These showed ionic conductivities above 10^?5 and 10^?7 S/cm at room temperature, respectively. An all-solid-state electrochromic display and a dry battery were prepared with these polymeric solid electrolytes. The all-solid-state electrochromic display showed excellent coloring and bleaching response by 1–3 V. The all-solid-state battery showed V _oc = 3.1 V stability for over 2 weeks. Their characteristics as well as their mechanism are also reported.     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

Design of Single Ionic Conduction in Polymeric Solid Electrolytes

Oligo(oxyethylene) methacrylate, MEO, has been synthesized as a basic material to design a polymeric solid electrolyte. The homopolymer P(MEO) has a glass transition temperature of -78°C. P(MEO) solubilizes inorganic salts without solvent, and the dissociated ions migrate fast to give very high ionic conductivity, above 10^?5 S/cm for ac. Although the ac conductivity is high, the current decreases gradually under dc conditions. This is improved by the design of an ionic conductor using only cations. Poly[oligo(oxyethylene) methacrylate-co-alkali metal methacrylate], P(MEO-MAM), is prepared as an organic solid electrolytes which allows cationic single-ion conduction. The ionic conductivity of the films depends on the electrolyte content, the dissociation energy of the comonomeric electrolytes, and the degree of segmental motion surrounding the ions in the polymer matrix. The ionic conductivity of Li or K is around 10^?6 S/cm in these polymeric systems at 80°C. The plot of logarithmic conducticity vs reciprocal absolute temperature is a curved line. The Williams-Landel-Ferry parameters, calculated from the temperature dependence of the conductivity, coincided with theoretical values within a certain range. The single-ion conduction in these films is concluded to be affected considerably by the segmental motion of the matrix polymer. This is also confirmed by the Vogel-Tammann-Fulcher plot.     

Solid lithium electrolytes based on Fe3+-modified lithium orthogermanate

Solid lithium electrolytes in the Li_4-3x Fe _x GeO₄ system were synthesized. Their phase composition, thermal behavior, and electrical conductivity were studied in the temperature interval 300–750°C. Introduction of Fe³⁺ ions into lithium orthogermanate leads to the formation of a γ-Li₃PO₄-type structure and to a sharp increase in the conductivity, with a maximum reached at x = 0.075–0.15: about 10^?1 S cm^?1 at 300°C and more than 1 S cm^?1 at 700°C. The main current carriers are interstitial Li⁺ cations weakly bound with the rigid framework. Owing to high conductivity, the electrolytes studied are of interest for use in high-temperature electrochemical devices.     

New solid polymer electrolytes based on polyester diacrylate for lithium power sources

New solid polymer electrolytes are developed for a lithium power source used at the temperatures up to 100°C. Polyester diacrylate (PEDA) based on oligohydroxyethylacrylate and its block copolymers with polyethylene glycol were offered for polymer matrix formation. The salt used was LiClO₄. The ionic conductivity of electrolytes was measured in the range of 20 to 100°C using the electrochemical impedance method. It is shown that the maximum conductivity in the whole temperature range is characteristic of the electrolyte based on the PEDA copolymer and polyethylene glycol condensation product (2.8 × 10^?6 S cm^?1 at 20°C, 1.8 × 10^?4 S cm^?1 at 95°C).     

Conductivity of crosslinked poly(N-vinylpyrrolidone) gel film containing surfactant as electrolyte salt

New polymeric solid electrolyte films, consisting of crosslinked poly(N-vinylpyrrolidone) (PVPD) as matrix, and surfactant, sodium deoxycholate (NaDC), lithium deoxycholate (LiDC), sodium laulylsulfate (R₁₂OSO₃Na), or sodium palmitate (R₁₅COONa) as electrolyte salt, are prepared; their basic structure and conductivity dependence on temperature are reported. The structure of the electrolytes is amorphous. Their conductivity is 3.1 × 10^?5 S cm^?1 (containing NaDC), 8.42 × 10^?6 S cm^?1 (LiDC), 2.18 × 10^?4 S cm^?1 (R₁₂OSO₃Na), and 7.27 × 10^?5 S cm^?1 (R₁₅COONa) at 20°C. Their temperature dependence of the conductivity is similar to that of liquid electrolyte rather than that of usual polymeric solid electrolyte, i.e., the WLF-type dependence. The values of activation energy of conductivity (E_a) were PVPD, 25.5 kJ mol^?1; PVPD/NaDC, 21.4 kJ mol^?1; PVPD/LiDC, 25.3 kJ mol^?1; PVPD/R₁₂OSO₃Na, 17.2 kJ mol^?1; PVPD/R₁₅COONa, 18.7 kJ mol^?1. © 1993 John Wiley & Sons, Inc.     

Proton Conductivities of Graphene Oxide Nanosheets: Single,Multilayer, and Modified Nanosheets

Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop‐cast method) are larger than those of single‐layer GO (prepared by either the drop‐cast or the Langmuir‐Blodgett (LB) method). At 60 % relative humidity (RH), the σ value increases from 1×10^?6 S cm^?1 in single‐layer GO to 1×10^?4 and 4×10^?4 S cm^?1 for 60 and 200 nm thick multilayer films, respectively. A sudden decrease in conductivity was observed for with ethylenediamine (EDA) modified GO (enGO), which is due to the blocking of epoxy groups. This experiment confirmed that the epoxide groups are the major contributor to the efficient proton transport. Because of a gradual improvement of the conduction path and an increase in the water content, σ values increase with the thickness of the multilayer films. The reported methods might be applicable to the optimization of the proton conductivity in other layered solid electrolytes.     

Superionic Conduction over a Wide Temperature Range in a Metal–Organic Framework Impregnated with Ionic Liquids

Most molecules in confined spaces show markedly different behaviors from those in the bulk. Large pores are composed of two regions: an interface region in which liquids interact with the pore surface, and a core region in which liquids behave as bulk. The realization of a highly mobile ionic liquid (IL) in a mesoporous metal–organic framework (MOF) is now reported. The hybrid shows a high room‐temperature conductivity (4.4×10^?3 S cm^?1) and low activation energy (0.20 eV); both not only are among the best values reported for IL‐incorporated MOFs but also are classified as a superionic conductor. The conductivity reaches over 10^?2 S cm^?1 above 343 K and follows the Vogel–Fulcher–Tammann equation up to ca. 400 K. In particular, the hybrid is advantageous at low temperatures (<263 K), where the ionic conduction is superior to that of bulk IL, making it useful as solid‐state electrolytes for electrochemical devices operating over a wide temperature range.     

Copolymerization of methacrylic acid alkali metal salts and polyether-containing monomers in solid polymer electrolytes

Copolymerization of methacrylic acid alkali metal salts (MAAM; M = Li, Na, K, Rb or Cs) and oligo(oxyethylene) methacrylate (MEO) was carried out in bulk or in poly(oligo(oxyethylene) methacrylate) (PMEO) at 60°C. The copolymers of MAAM and MEO which were obtained by bulk polymerization showed a cation conductivity of around 1 × 10^?7 S/cm at room temperature. On the other hand, the copolymers obtained by radical polymerization in PMEO, showed a higher cation conductivity (10^?6–10^?5 S/cm). Furthermore, higher cation conductivity was observed for the copolymer systems containing alkali metal cations with a larger ion radius. This tendency was explained by the strength of the bond between alkali metal cation and ether oxygens. The degree of dissociation had little effect on this difference in the conductivity. The effective dissociation of methacrylic salts was enhanced in the copolymer compared to the homopolymer because of the suppression of the adjacent dissociative carboxylic acid groups. Arrhenius plots for ionic conductivity show the migration of ions along with the segmental motion of the polymer matrix.     

Vacancy‐Controlled Na+ Superion Conduction in Na11Sn2PS12

Highly conductive solid electrolytes are crucial to the development of efficient all‐solid‐state batteries. Meanwhile, the ion conductivities of lithium solid electrolytes match those of liquid electrolytes used in commercial Li⁺ ion batteries. However, concerns about the future availability and the price of lithium made Na⁺ ion conductors come into the spotlight in recent years. Here we present the superionic conductor Na₁₁Sn₂PS₁₂, which possesses a room temperature Na⁺ conductivity close to 4 mS cm^?1, thus the highest value known to date for sulfide‐based solids. Structure determination based on synchrotron X‐ray powder diffraction data proves the existence of Na⁺ vacancies. As confirmed by bond valence site energy calculations, the vacancies interconnect ion migration pathways in a 3D manner, hence enabling high Na⁺ conductivity. The results indicate that sodium electrolytes are about to equal the performance of their lithium counterparts.     

Solid potassium-conducting electrolytes in the K2 − 2x Ga2 − x V x O4 system

New potassium-conducting solid electrolytes based on potassium monogallate in the K_2?2x Ga_2?x V _x O₄ system are synthesized and studied. It is found that an introduction of V⁵⁺ ions leads to a considerable increase in the KGaO₂ conductivity due to the formation of vacancies in the potassium sublattice. The conductivity for optimal compositions is approximately 10^?3 S cm^?1 at 400°C and above 10^?2 S cm^?1 at 700°C. The results are compared with early obtained data for potassium monogallate dopped with four-charged cations.     

Investigation on the effect of nanosilica towards corn starch–lithium perchlorate-based polymer electrolytes

Biodegradable corn starch–lithium perchlorate (LiClO₄)-based solid polymer electrolytes with addition of nano-sized fumed silica (SiO₂) were prepared by solution casting technique. Ionic conductivity at ambient temperature was measured by AC impedance spectroscopy. Upon addition of nano-sized SiO₂, the ionic conductivity at room temperature is increased. The optimum ionic conductivity value obtained was 1.23?×?10^?4?S?cm^?1 at 4?wt% SiO₂. This may be attributed to the low crystallinity of the polymer electrolytes resulting from the dispersed nanosilica particles. Fourier–transform infrared spectroscopy studies confirmed the complexation between corn starch, lithium perchlorate, and silica. The thermal properties of the prepared samples were investigated with differential scanning calorimetry and thermogravimetric analysis. The surface morphology of the polymer electrolytes confirmed the agglomeration of particles after excess dispersion of inorganic filler. This was proven in the scanning electron microscopy studies.     

Activity coefficients and diffusion coefficients of dilute aqueous solutions of lithium,sodium, and potassium hydroxides

A simplified version of Harned's conductimetric technique has been used to measure binary diffusion coefficients of aqueous lithium, sodium, and potassium hydroxides at 25°C from 0.002 to 0.14 mol-dm^–3. Because of the large difference in mobility between OH^– and the cations, the electrophoretic effect tends to reduce the rate of diffusion of the alkali metal hydroxides; the largest effect is observed for LiOH solutions. The measured diffusion coefficients are in excellent agreement with predictions of the Onsager-Fuoss theory of ion transport. Precise activity coefficients determined from the diffusion measurements are compared with activity coefficients obtained previously by emf methods.     

Proton‐Conducting Hydrogen‐Bonded 3D Frameworks of Imidazo‐Pyridine‐Based Coordination Complexes Containing Naphthalene Disulfonates in Rhomboid Channels

Coordination complexes of an olefinic molecule (PIP) containing pyridine and imidazopyridine moieties with Zn^II/Ni^II metal salts were shown to exhibit appreciable proton conductivity. These complexes form 3D‐hydrogen bonded frameworks containing rhomboidal channels that are occupied by uncoordinated 1,5‐naphthalenedisulfonate (NDS). The extensive hydrogen bonding between the frameworks and NDS resulted in thermally stable and water‐insoluble materials. Irrespective of the metal atom present, both complexes exhibited moderate to high proton conduction in the range of 10^?5 to 0.5×10^?3 S cm^?1 depending on the temperature and humidity levels.     

Beyond the Polysulfide Shuttle and Lithium Dendrite Formation: Addressing the Sluggish Sulfur Redox Kinetics for Practical High‐Energy Li‐S Batteries

Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium–sulfur (Li‐S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li‐S pouch cells. Herein, we demonstrate that a rational combination of selenium doping, core–shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm^?2) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm^?2) with a low electrolyte/sulfur ratio (10 μL mg^?1). This research further demonstrates a durable Li‐Se/S pouch cell with high specific capacity, validating the potential practical applications.     

High‐Performance Sodium Metal Anodes Enabled by a Bifunctional Potassium Salt

Developing Na metal anodes that can be deeply cycled with high efficiency for a long time is a prerequisite for rechargeable Na metal batteries to be practically useful despite their notable advantages in theoretical energy density and potential low cost. Their high chemical reactivity with the electrolyte and tendency for dendrite formation are two major issues limiting the reversibility of Na metal electrodes. In this work, we introduce for the first time potassium bis(trifluoromethylsulfonyl)imide (KTFSI) as a bifunctional electrolyte additive to stabilize Na metal electrodes, in which the TFSI^? anions decompose into lithium nitride and oxynitrides to render a desirable solid electrolyte interphase layer while the K⁺ cations preferentially adsorb onto Na protrusions and provide electrostatic shielding to suppress dendritic deposition. Through the cooperation of the cations and anions, we have realized Na metal electrodes that can be deeply cycled at a capacity of 10 mAh cm^?2 for hundreds of hours.     

Determination of binding constants of various alkali metal cations with p-sulfonatocalix[8]arene by using inclusion equilibrium with thionine dye

The binding constants of various alkali metal cations with water-soluble p-sulfonatocalix[8]arene (Calix-S8) were determined spectrophotometrically by using the inclusion equilibrium of thionine (Th) dye as a chemical indicator. Depending on the kind of alkali metal cations, the inclusion constants of Calix-S8 for Th decrease steeply with an increase in salt concentrations. Alkali metal cations compete with the organic guest Th in the Calix-S8 inclusion. Based on a competitive binding experiment, the binding constants of alkali metal cations with Calix-S8 were evaluated to be 17, 60, and 11 dm⁶ mol^?2 for Na⁺, K⁺, and Cs⁺, respectively. We have demonstrated an absorption-based method of evaluating the binding constants of spectroscopically inert metal cations with Calix-S8 and shown the effects of salts on the molecular recognition of Calix-S8.     

Electrical Characterization and Ionic Transport Properties of Carboxyl Methylcellulose-Oleic Acid Solid Polymer Electrolytes

Electrical impedance spectroscopy was used to measure the conductivity of solid polymer electrolytes. From the impedance study, the highest ionic conductivity of solid polymer electrolytes based on carboxyl methylcellulose as polymer host and oleic acid as the doping salt, prepared by the solution casting method at room temperature, σ_r.t, is 2.11 × 10^?5 S cm^?1 for the sample containing 20 wt.% of oleic acid. Transference number measurement was performed to correlate the diffusion phenomena to the conductivity behavior of carboxyl methylcellulose-oleic acid solid polymer electrolytes. From the transference number measurement study, the conduction species carrier of the cation (+) is higher than that of the anion (?). Thus, the results proved that the samples are proton-conducting solid polymer electrolytes.     

Enhanced Lithium‐Ion Conductivity of Polymer Electrolytes by Selective Introduction of Hydrogen into the Anion

The anion chemistry of lithium salts plays a pivotal role in dictating the physicochemical and electrochemical performance of solid polymer electrolytes (SPEs), thus affecting the cyclability of all‐solid‐state lithium metal batteries (ASSLMBs). The bis(trifluoromethanesulfonyl)imide anion (TFSI^?) has long been studied as the most promising candidate for SPEs; however, the Li‐ion conductivities of the TFSI‐based SPEs still remain low (Li‐ion transference number: ca. 0.2). In this work, we report new hydrogen‐containing anions, conceived based on theoretical considerations, as an electrolyte salt for SPEs. SPEs comprising hydrogen‐containing anions achieve higher Li‐ion conductivities than TFSI‐based ones, and those anions are electrochemically stable for various kinds of ASSLMBs (Li–LiFePO₄, Li–S, and Li–O₂ batteries). This opens up a new avenue for designing safe and high‐performance ASSLMBs in the future.