An efficient and facile synthesis of new tetracyclic fused pyrazolo[4,3-<Emphasis Type="Italic">c</Emphasis>][1,2,4]triazino[4,5-<Emphasis Type="Italic">a</Emphasis>]quinolin-4(5<Emphasis Type="Italic">H</Emphasis>)-ones

Reaction of amidrazones 1a–1i with (1,5-dihydro-3-methyl-5-oxo-1-phenyl-4H-pyrazol-4-ylidene)propanedinitrile (2) in ethyl acetate solution in one-step reaction led to the formation of unprecedented pyrazolo[4,3-c][1,2,4]triazino[4,5-a]quinolin-4(5H)-ones 3a–3g along with pyrazolo[4,3-c][1,2,4]triazino[4,5-a]quinolin-12b-oles 3h–3m in moderate to excellent yields. These novel heterocycles were formed via a Michael addition reaction followed by intramolecular cyclization via a dearomatization process.     

Synthesis of new chiral 1,3,4-thiadiazole-based di- and tri-arylsulfonamide residues and evaluation of in vitro anti-HIV activity and cytotoxicity

A series of new chiral 1,3,4-thiadiazole-based bis-sulfonamides 4a–4w and tri-sulfonamide analogue 5 was synthesized and evaluated as anti-HIV agents. The reaction of chiral amino acids 1 with sulfonyl chlorides 2, followed by subsequent reaction of resultant N-protected amino acids 2a–2f with thiosemicarbazide in the presence of excess phosphorous oxychloride afforded N-(1-(5-amino-1,3,4-thiadiazol-2-yl)alkyl)-4-arylsulfonamides 3a–3f. Treatment of 2a–2f with substituted sulfonyl chlorides in portions furnished the target bis-sulfonamide analogues 4a–4w in good yields, together with the unexpected 5. The new compounds were assayed against HIV-1 and HIV-2 in MT-4 cells. Compounds 4s were the most active in inhibiting HIV-1 with IC₅₀?=?9.5 μM (SI?=?6.6), suggesting to be a new lead in the development of an antiviral agent. Interestingly, compound 5 exhibited significant cytotoxicity of >?4.09 μM and could be a promising antiproliferative agent.     

Synthesis and Study the Effect of Donor-Acceptor Substituent on Fluorescence Behavior of Thieno[3, 2-c]pyridine Derivatives

4-Hetero-1-yl-2-bromothieno[3,2-c]pyridines 3(a–d) were synthesized by the reaction of 2-bromo-4-chlorothieno[3,2-c]pyridine (1) and cyclic amine 2(a–d), which on Suzuki coupling with substituted boronic acids 4(a–f) exclusively converted to corresponding 4-hetero -1-yl-2-arylthieno[3,2-c]pyridine 5(a–x) in good yields. The effect of donor-acceptor substituent on absorption emission properties and fluorescent quantum yield of new thienopyridine derivatives 5(a-x) were studied.     

Evaluated Integral Cross Sections of the <Superscript>3</Superscript>H(<Emphasis Type="Italic">t</Emphasis>,2<Emphasis Type="Italic">n</Emphasis>)<Superscript>4</Superscript>He Reaction in the Low-Energy Region Obtained with Regard to Electron Screening

procedure is considered for analyzing ³H(t,2n)⁴He reaction proceeding in a gas environment with regard to electron screening [1–4]. Results from such an analysis are presented. An electron screening potential of 121 eV is obtained. The magnitude of this potential is three times higher than the one given in [5]. Starting with a 100 eV energy of particle interaction the cross sections of ³H(t,2n)⁴He reaction are calculated using the above potential. The reaction rates are calculated using the evaluated cross sections in the lowenergy region. Enhancement factors for cross sections and reaction rates are defined.     

Effect of pressure on soot formation in the pyrolysis of <Emphasis Type="Italic">n</Emphasis>-hexane and the oxidation of fuel-rich mixtures of <Emphasis Type="Italic">n</Emphasis>-heptane behind reflected shock waves

The results of detailed kinetic simulations of the formation of soot particles in the pyrolysis of n-hexane–argon mixtures and in the oxidation of fuel-rich (φ = 5) n-heptane–oxygen–argon mixtures behind reflected shock waves at pressures of 20–100 bar and a constant concentration of carbon atoms or a constant fraction of argon in the initial mixture within the framework of a modified reaction mechanism are reported. The choice of n-hexane and n-heptane for examining the effect of pressure on the process of soot formation was motivated by the availability for these hydrocarbons of experimental measurements in reflected shock waves at high pressures (up to ~100 bar). The temperature dependences of the yield of soot particles formed in the pyrolysis of n-hexane are found to be very weakly dependent on pressure and slightly shifting to lower temperatures with increasing pressure. In general, pressure produces a very weak effect on the soot formation in the pyrolysis of n-hexane. The effect of pressure and concentration of carbon atoms in the initial mixture on the process of soot formation during the oxidation of fuel-rich n-heptane mixtures behind reflected shock waves is studied. The results of our kinetic simulations show that, for both the pyrolysis of n-hexane and the oxidation of fuel-rich n-heptane–oxygen mixtures, the influence of pressure on the process of soot formation is negligible. By contrast, the concentration of carbon atoms in the initial reaction mixture produces a much more pronounced effect.     

Improved Pt/C electrocatalysts for methanol oxidation prepared by different reducing agents and surfactants and DFT studies on it

In this work, PtCl₄ as precursor; sodium borohydride (Cat I), hydrazinium hydroxide (Cat II), and formaldehyde (Cat III) as reducing agents; and 1-heptanamine (a), N-methyl-1-heptanamine (b), and N,N-dimethyl-1-heptanamine (c) as surfactants were used to prepare platinum nanoparticles which were then dispersed on carbon XC-72 for use as catalysts in the methanol oxidation reaction. XRD and TEM results indicate that the platinum has a face-centered cubic structure and is found as small and agglomerated particles in different shapes, sizes, and densities. Cat I comprises small (~?5 nm) cubic and formless agglomerated (~?20–~?300 nm) particles, Cat II is composed of small (~?5 nm) and a significant number of quite dense spherical agglomerated (~?20–~?150 nm) particles, and Cat III contains large number of small (~?5 nm) and a small number of spherical, less dense, and agglomerated (~?20–~?200 nm) particles. XPS data shows that the platinum exists in two different oxidation states Pt(0) (~?64.5–~?69.6%) and Pt(IV) (~?35.5–~?30.4%), and platinum surface also contains OH, H₂O, C–O, C=O, and carbon. DFT and FTIR show that the surfactants decompose to form partially crystalline carbon. Electrochemical studies reveal that performance order of the catalysts towards the methanol oxidation reaction is Cat II < Cat I < Cat III, and that Cat IIIc has the highest performance, which is 2.23 times larger than E-TEK catalysts. It was found that the performance of the catalysts depends on the kind of surfactant, reducing agent, electrochemical surface area, percent platinum utility, roughness factor, and I_f/I_r ratio.

Open image in new window

Graphical abstract ?

     

Hierarchical porous nitrogen-doped partial graphitized carbon monoliths for supercapacitor

Porous carbon monoliths have attracted great interest in many fields due to their easy availability, large specific surface area, desirable electronic conductivity, and tunable pore structure. In this work, hierarchical porous nitrogen-doped partial graphitized carbon monoliths (N–MC–Fe) with ordered mesoporous have been successfully synthesized by using resorcinol-formaldehyde as precursors, iron salts as catalyst, and mixed triblock copolymers as templates via a one-step hydrothermal method. In the reactant system, hexamethylenetetramine (HMT) is used as nitrogen source and one of the carbon precursors under hydrothermal conditions instead of using toxic formaldehyde. The N–MC–Fe show hierarchically porous structures, with interconnected macroporous and ordered hexagonally arranged mesoporous. Nitrogen element is in situ doped into carbon through decomposition of HMT. Iron catalyst is helpful to improve the graphitization degree and pore volume of N–MC–Fe. The synthesis strategy is user-friendly, cost-effective, and can be easily scaled up for production. As supercapacitors, the N–MC–Fe show good capacity with high specific capacitance and good electrochemical stability.

Open image in new window

Graphical abstract Hierarchical porous nitrogen-doped partial graphitized carbon monoliths with ordered mesoporous have been successfully synthesized by using resorcinol-formaldehyde as precursors, iron as catalyst, and mixed triblock copolymers as templates via a one-step hydrothermal method.

     

Nanopattern formation using localized plasma for growth of single-standing carbon nanotubes

We report a novel method for formation of self-organized single-standing carbon nanotubes by customizing a plasma-based process. The growth of carbon nanotubes by plasma-enhanced chemical vapor deposition provides suitable grounds to utilize plasma–solid interactions for nanopatterning. The bulk plasma is utilized to fabricate carbon nanotubes on the prepatterned Ni catalyst which in turn can confine the plasma to the growth region. The plasma localization leads to a dielectrophoretic force exerted on Ni atoms and can be engineered in order to grow a specific pattern of self-organized single-standing carbon nanotubes. Numerical simulations based on the plasma localization and dielectrophoretic force confirmed the experimental results. This method provides a simple and cost-effective approach to obtain nanopatterned arrays of carbon nanotubes which can be used for fabrication of photonic and phononic crystals, self-gated field emission-based transistors and displays.

Open image in new window

Graphical abstract Nanopattern formation using localized plasma

     

Variable Activity of Reagents with C=C and N=N Bonds in Cycloaddition Reactions

Data on rates and enthalpies of the reactions of quadricyclane (4) and diadamantylidene (5) with N-phenylmaleimide (1), 4-phenyl-1,2,4-triazoline-3,5-dione (2), and tetracyanoethylene (3) are obtained for the first time. Reagent 2 with the N=N reaction center is found to be six orders of magnitude more active than its structural analog 1. A strong π-acceptor 3 is 370 times more active than reagent 2 in the reaction with a strong π-donor substrate 4 but is less active than reagent 2 in many [4π + 2π], [2π + 2π + 2π], and [2π + 2π] cycloaddition reactions, and, especially, in ene reactions. The possible causes of the strong difference and variable activity of compounds 1–3 with C=C and N=N bonds are discussed.     

Boron doped carbon nanotubes via ceramic catalysts

A facile metal catalyst free route to synthesize boron doped (0.6%–1.0%) carbon nanotubes via ceramic nanowires in which the formation of the nanowires (probably serving as templates), the carbon nanotubes and their doping all occur unanimously in the reaction, is presented.

     

Novel Method for the Oxidation of Aliphatic Hydrocarbons to Alcohols

A novel method for the conversion of hydrocarbons to alcohols using a reaction of gas-phase oxidation by oxygen in the presence of boron trichloride has been developed and described in detail. The reaction represents radical long-chain alkoxylation of boron trichloride. It proceeds at moderate temperatures of 150–180°C and atmospheric pressures of less than one atmosphere, resulting in methane conversion to (CH₃O)_3–nBCl_n (n = 0–2) and ethane conversion to (CH₃CH₂O)_3–nBCl_n (n = 0–2). The hydrolysis of the reaction products generates CH₃OH and C₂H₅OH, respectively. The yield of methanol reaches up to 55% at the conversion of methane of ~15% at the early stages of the reaction. The yield of ethanol is at least 65% of the reacted ethane nearly to the end of the reaction.     

Coordination preference and magnetic properties of FeII assemblies with a bis-azole bearing 1,2,4-triazole and tetrazole

With a new bis-azole molecular fragment (Htt) bearing 1,2,4-triazole and tetrazole, a mononuclear complex [Fe(tt)₂(H₂O)₄]·2H₂O (1), a trinuclear complex [Fe₃(tt)₆(H₂O)₆]·2H₂O (2) and a 1D coordination polymer [Fe(tt)(Htt)₂]BF₄·2CH₃OH (3) were obtained by varying reaction conditions. Htt acts either as an anionic or neutral ligand depending upon the reaction medium and pH. Thermal variation of spin states of 1–3 were investigated in the range 77–300?K by ⁵⁷Fe M?ssbauer spectroscopy. 1 totally remains in high-spin state over the entire temperature range whereas no spin crossover was evidenced in 2. Nearly 1:1 high-spin and low-spin population ratio is found in 3, which remains constant over the entire temperature range investigated.     

Investigation of the D(<Superscript>3</Superscript>He, <Emphasis Type="Italic">p</Emphasis>)<Superscript>4</Superscript>He Reaction in the Astrophysical Energy Region of 18–30 keV

The D(³He, p)⁴He reaction is first investigated in a solid target of deuterated zirconium (ZrD) in the ³He⁺ ion energy range E_He = 18–30 (E = 7.2?12.0keV keV in the center-of-mass system) with a step of 2 keV. The electron screening potential U_e = (617.8 ± 154.7) eV and the D(³He, p)⁴He reaction enhancement factors are experimentally determined in the given energy range. The measured electron screening potential is six times higher than in gaseous targets. This can be due to the ZrD lattice effects, which have not been studied either theoretically or experimentally so far. The D(³He, p)⁴He reaction has been investigated at the pulsed plasma Hall accelerator (Tomsk).     

Conventional and microwave-assisted synthesis of new indole-tethered benzimidazole-based 1,2,3-triazoles and evaluation of their antimycobacterial,antioxidant and antimicrobial activities

A new series of triheterocycles containing indole–benzimidazole-based 1,2,3-triazole hybrids have been synthesized in good yields via a microwave-assisted click reaction. All the compounds were characterized by IR, \(^{1}\hbox {H}\) NMR, \(^{13}\hbox {C}\) NMR and mass spectroscopy and were evaluated for their in vitro antitubercular activity against the Mycobacterium tuberculosis H37Rv strain. Compounds 4b, 4h and 4i displayed highly potent antitubercular activity with MIC 3.125–6.25 \(\upmu \hbox {g}/\hbox {mL}\). The antioxidant potential was evaluated using 2,2-diphenyl-1-picryl hydrazine and \(\hbox {H}_{2}\hbox {O}_{2}\) radical scavenging activity, and compounds 4e,4f and 4g showed excellent radical scavenging activity with \(\hbox {IC}_{50}\) values in the range of 08.50–10.05 \(\upmu \hbox {g}/\hbox {mL}\). Furthermore, the compounds were evaluated for antimicrobial activity against numerous bacterial and fungal strains, and compounds 4b, 4c and 4h were found to be the most promising potential antimicrobial molecules with MIC 3.125–6.25 \(\upmu \hbox {g}/\hbox {mL}\).     

Quantum-Chemical Study of Stressed Polyethylene and Butadiene Rubber Chain Scission

The thermal decomposition of polyethylene and butadiene rubber chains in the presence of a tensile force acting along the axis of the molecule was simulated. The reaction of an isolated chain was considered. The chain models were the octane and 2,6-octadiene molecules. A deformation was introduced in the problem by fixing nonequilibrium distances between the terminal carbon atoms. The reaction coordinate (the middle C–C bond length R) was scanned at a fixed length of the molecule (L). That is, the potential energy surface section of the reaction was constructed at L = const. The reaction sensitivity to deformation was evaluated by B3LYP, LC-ωPBE, CCSD(T), CASSCF, and MP2 quantum-chemical calculations. All these calculations showed that the molecule elongated by ~1 Å for polyethylene, but shortened by 0.3–0.5 Å for 2,6-octadiene during chain scission. This means that the tensile deformation accelerates the decomposition of polyethylene, but decelerates the decomposition of butadiene rubber.     

Paramagnetic centers in single-walled carbon nanotubes encapsulated with palladium and their interaction with hydrogen at H/C ≥ 1.0

The nature of paramagnetic centers in a nanostructure based on single-walled carbon nanotubes (SWCNTs) encapsulated with Pd was studied by EPR spectroscopy at 77 and 293 K. It was found that strong charge-transfer π complexes of the (Pd-C _x ) type, which manifested themselves as a narrow resonance (ΔH = 6–8 G and g = 2.002 at T = 77 k), were formed in the Pd-SWCNT composite along with impurity centers (Fe₃O₄ nanoparticles within the nanotubes), which were responsible for a broad EPR signal (ΔH = 75 G and g = 2.065 at T = 293 K). These complexes were found to be predominant adsorption sites responsible for a high gravimetric density of hydrogen (H/C ≥ 1.0) within the single-walled carbon nanotubes.     

Structure and phase composition of thin a-C:H films modified by Ag and Ti

The structure and phase composition of thin a-C:H and a-C:H〈M〉 films (M = Ag, Ti, or Ag + Ti) have been studied by Raman and X-ray photoelectron spectroscopy. The a-C:H〈M〉 films were prepared by ion-plasma magnetron sputtering of a combined target of graphite and metal in an Ar–CH₄ gas mixture. The Raman spectra of these films indicate that their structure is amorphous. The a-C:H〈Ag + Ti〉 films have a more graphitized structure in comparison with pure a-C:H films and films containing only one metal. It is established that carbon in the a-C:H〈Ag + Ti〉 films is in the sp ², sp ³, and C=O states, which are characteristic of the a-C:H, a-C:H〈Ag〉, and a-C:H〈Ti〉 films. In addition, there are also ether (–C–O–C–) or epoxy (?C?O–) carbon groups in the a-C:H〈Ag + Ti〉 films. It has been revealed that silver atoms in the a-C:H〈Ag〉 and a-C:H〈Ag + Ti〉 films form no chemical bonds with carbon, oxygen, and titanium. Titanium in the a-C:H〈Ti〉 and a-C:H〈Ag + Ti〉 films exists in the form of titanium IV oxide (TiO₂).     

Tamarind seed skin-derived fiber-like carbon nanostructures as novel anode material for lithium-ion battery

Demand of low-cost carbonaceous anode materials for lithium-ion batteries has led to the development of anode materials from different bio-sources. In this regard, tamarind seed (skin) was used as a precursor to prepare disordered carbon as an anode material for lithium-ion batteries. The carbon was prepared through simple hydrothermal method and was characterized by X-ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET) measurements, field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) techniques. It exhibited amorphous carbon particles arranged in a fiber-like morphology with high surface area of 508 m² g^?1. The binder content was optimized for the carbon to achieve high and stable capacity. Electrochemical performance of the as-prepared carbon with optimized binder content showed a stable reversible specific capacity of 224 mAhg^?1 after 300 cycles at 1 C-rate. The stable cycling performance of carbon at high current rate is explained by electrochemical impedance spectroscopy (EIS) and FE-SEM data of cycled electrodes. The low cost and stable specific capacity make the carbon as potential anode material for lithium-ion battery.

Open image in new window

Graphical abstract Fiber-like carbon nanostructures from tamarind seed (skin) (TDC) via simple and effective hydrothermal method and its application as a novel anode material for lithium-ion battery.

     

A green non-acid-catalyzed process for direct N=N–C group formation: comprehensive study,modeling, and optimization

The aim of this work is to introduce, model, and optimize a new non-acid-catalyzed system for a direct N\(=\)N–C bond formation. By reacting naphthols or phenol with anilines in the presence of the sodium nitrite as nitrosonium (\(\hbox {NO}^{+})\) source and triethylammonium acetate (TEAA), a N\(=\)N–C group can be formed in non-acid media. Modeling and optimization of the reaction conditions were investigated by response surface method. Sodium nitrite, TEAA, and water were chosen as variables, and reaction yield was also monitored. Analysis of variance indicates that a second-order polynomial model with F value of 35.7, a P value of 0.0001, and regression coefficient of 0.93 is able to predict the response. Based on the model, the optimum process conditions were introduced as 2.2 mmol sodium nitrite, 2.2 mL of TEAA, and 0.5 mL \(\hbox {H}_{2}\hbox {O}\) at room temperature. A quadratic (second-order) polynomial model, by analysis of variance, was able to predict the response for a direct N=N–C group formation. Predicted response values were in good agreement with the experimental values. Electrochemistry studies were done to introduce new Michael acceptor moieties. Broad scope, high yields, short reaction time, and mild conditions are some advantages of the presented method.