表面活性剂亲水-亲油能力对动态界面张力的影响

当两个不互溶的液相接触时 ,如果其中一相或两相含有表面活性物质 ,就可能产生动态界面张力 .两相间的界面张力随时间连续变化 ,直到平衡为止 .在到达平衡的过程中 ,经常通过一个最低值 .酸 性油 /碱水体系也会出现类似现象 .England和 Berg[1]把动态界面张力解释为表面活性物质在界面上累积的结果 ,并观察到 1,5-戊二醇由白油向水 中传质时存在明显的吸附-脱附位垒 .Rubin和 Radke[2]首次给出了解释酸性原油与碱水溶液接触时产生动态界面张力的物理模型 ,他们提出在油水界面上存在一个表面活性物质的脱附位垒 ,原油中的酸性物质与氢氧化…     

QSPR方法预测阴离子表面活性剂亲水亲油平衡值

首次使用量子化学描述符, 建立了两种阴离子表面活性剂亲水亲油平衡(HLB)值的定量结构性质关系模型(QSPR). 最佳模型1包括四类不同结构的烷基硫酸盐和烷基磺酸盐46种阴离子表面活性剂, 复相关系数R²＝1.000. 又建立了包含聚氧乙烯、乙酸、丙酸和碳氟等特殊类型不同结构的73种阴离子表面活性剂的最佳模型2, 复相关系数 R²＝0.993.     

油、水和混合表面活性剂"混相体系"的超低界面张力

本文考察了几种表面活性剂的复配体系,结果表明：油水两相极易混合（“混相”）的体系,界面张力必定超低。进而又了盐浓度及温度对体系界面张力的影响,油一水界面张力超低时,体系存在特殊的液晶结构,利用形成超低界面张力和混相体系的分散及稳定,从实验结果看,液晶更可能分散于体相中。含非离子的复配体系,存在相反转温度（ＰＩＴ）,且在相反转温度时界面张力出现最低值。     

阴阳离子表面活性剂混合体系在克拉玛依油田中获得超低界面张力

利用阴阳离子表面活性剂复配技术,在克拉玛依油田实际油水体系中获得了超低界面张力.通过添加非离子保护剂的第三组分,阴阳离子表面活性剂混合体系在克拉玛依油田回注水体系中的溶解度大大提高.确定了相关体系能够获得超低界面张力的表面活性剂的浓度和混合的比例范围,在克拉玛依油田的多个实际油水体系中获得了具有较大复配比例和较低表面活性剂浓度的实际配方,其中部分体系油水界面张力可接近10-4mN·m-1.同时,这类阴阳离子表面活性剂混合体系具有很好的抗吸附能力,在石英砂吸附72 h后体系依然呈现优良的超低界面张力.     

系列烷基苯磺酸盐对烷烃的动态界面张力研究

从表面活性剂分子量、表面活性剂浓度、电解质浓度、烷烃碳数等方面考察了系列烷基苯磺酸盐异构体纯化合物的油水动态界面张力行为.研究表明,表面活性剂分子量增大和电解质浓度增加使界面张力动态变化减慢,达到平衡所需时间延长;表面活性剂浓度增加和烷烃碳数增加使界面张力动态变化加快,达到平衡所需时间减少.     

正负离子混合表面活性剂双水相界面张力的研究

用旋转滴法测定了正负离子混合表面活性剂形成的双水相界面张力, 研究了双水相界面张力与表面活性剂的分子结构、正负离子表面活性剂的摩尔比、总浓度、外加无机盐及温度的关系. 结果表明, 双水相界面张力在一定正、负离子表面活性剂的摩尔比时属于超低界面张力范围. 观察到三种界面张力曲线类型, 第一类为摩尔比1:1 的两边的两条曲线, 界面张力随过剩表面活性剂组分的比例增加而降低; 第二类为一条跨过摩尔比1:1的马鞍型曲线; 第三类为位于摩尔比1:1的一边的一条马鞍型曲线. 界面张力曲线的类型主要取决于表面活性剂的分子结构, 包括亲水基类型、疏水链长度及对称性.     

CMC系列高分子表面活性剂与原油 超低界面张力形成机理的研究

采用动态激光光散射及环境扫描电镜研究了羧甲基纤维素系列高分子表面活性剂与大庆原油形成超低界面张力的机理.结果表明,CMC系列高分子表面活性剂具有与低分子量表面活性剂相比拟的表/界面活性,其水溶液的表面张力可达28～35mN/m,界面张力达到10     

CMC系列高分子表面活性剂与原油超低界面张力形成机理的研究

采用动态激光光散射及环境扫描电镜研究了羧甲基纤维素系列高分子表面活性剂与大庆原油形成超低界面张力的机理.结果表明,CMC系列高分子表面活性剂具有与低分子量表面活性剂相比拟的表/界面活性,其水溶液的表面张力可达2835mN/m,界面张力达到10^-110mN/m.碱的加入可显著降低高分子表面活性剂与原油的界面张力,在适当条件下界面张力达到超低值(10^-3mN/m),可望作为三次采油的驱油剂.等效烷烃模型研究表明,用碱与原油酸性组分的作用来解释碱能使界面张力下降至超低值的传统观点是不完善的,加入碱能使高分子表面活性剂胶束解缔,胶束数量增多,胶束粒径减小,单分子自由链增加,有利于高分子表面活性剂向界面迁移和排布,这是高分子表面活性剂和碱复配体系与原油界面张力下降至超低值的主要原因.     

阴阳离子表面活性剂体系超低油水界面张力的应用

通过阴阳离子表面活性剂复配,在实际油水体系中获得了超低界面张力.通过在阴离子表面活性剂分子结构中加入乙氧基(EO)链段,以及采用阴阳离子加非离子型表面活性剂的三组分策略,有效解决了混合表面活性剂在水溶液中溶解度问题.进而研究了阳离子表面活性剂结构、非离子表面活性剂结构、三者组分配比、表面活性剂总浓度等因素对油水界面张力的影响,从而在胜利油田多个实际油水体系中获得了较大比例范围和较低浓度区域的油水超低界面张力,部分体系甚至达到了10-4 mN·m-1.由于阴阳离子表面活性剂间强烈的静电吸引作用,相关体系具有很好的抗吸附能力.经过石英砂48 h吸附后,体系仍然具有很好的超低界面张力.     

一种亲水-亲油复合固相萃取填料的制备及其在食品安全检测中的应用

合成了一种以二乙烯苯和N-乙烯吡咯烷酮为单体的高分子聚合物固相萃取填料(DVB-NVP),以6种不同极性的化合物为模型化合物,结合高效液相色谱法(HPLC)对该填料进行了系统的评价,并与传统的C18填料及商品化同类型填料做对比;对填料进行了磺酸化修饰(DVB-NVP-SO₃H),并将合成的填料应用于复杂基质中化合物的分析。结果表明:该填料对不同极性化合物的回收率在95.55%~101.08%之间,优于商品化C18填料,与商品化同类型填料相当。DVB-NVP对于白酒中邻苯二甲酸二甲酯、邻苯二甲酸二乙酯、邻苯二甲酸二丁酯的分析回收率分别为102.55%、102.99%、102.11%,相对标准偏差分别为2.11%、1.69%、0.79%; DVB-NVP-SO₃H用于对猪肉中的可乐定和赛庚啶进行分析,回收率分别为89.23%和91.42%,相对标准偏差分别为8.21%和8.86%,符合生物样品分析要求。所合成的填料具有普适性,并具有较高的回收率,应用前景广泛。     

Study on the Interfacial Tensions Between Oils and Alkylbenzene Sulfonate Gemini Surfactant Solutions

Interfacial tensions (IFT) of five alkylbenzene sulfonate Gemini surfactants Ia, Ib, Ic, Id, and Ie at different oils/water systems were measured by a spinning drop interfacial tensiometer. And critical micelle concentration (CMC), the interfacial tension at CMC (γ_CMC), maximum interfacial excess concentration (Γ _max) and the surface area per molecule (A_min) were calculated. The results indicated that the CMC values determined with interfacial tension method were lower than those determined with surface tension method. And γ_CMC for Ie is larger than that for Ia, Ib, Ic, and Id. In addition, the effects of temperature and hydrophobic chains on dynamic IFT were also studied. With the increment of temperature, dynamic IFT is easier to reach a stable value. However, with the increment of hydrophobic chains, dynamic IFT is more difficult to reach a stable value. Each Gemini surfactant produces a minimum IFT when measured against a different n-alkane.     

由表面活性物质溶液的动界面张力外推求平衡界面张力的研究

表面活性物质溶液的界面张力往往随时间而变,难以测得平衡界面张力J。Kloubek^[1]曾应用经验式:1/(δ_H2O-δ_t)=b/(At^1/2)+1/A,以[1/(δ_H2O-δ_t)]对1/t^1/2作图外推求得溶液的平衡表面张力,但所得结果仅与文献值大致相符。本文从理论上分析该经验式的由来,以及产生偏离的原因,并寻求了解决的办法。     

Effect of Crude Oil Fractions on Interfacial Tensions of Novel Sulfobetaine Solutions

The dynamic interfacial tensions (IFTs) of two novel zwitterionic surfactants with different hydrophobic groups, alkyl sulfobetaine (ASB), and xylyl substituted alkyl sulfobetaine (XSB), against kerosene, crude oil, and model oils containing crude oil fractions, such as resins, asphaltenes, saturates, aromatics, and acidic fractions, have been investigated by a spinning drop interfacial tensiometer. The experimental results show that XSB solutions show higher interfacial activity than ASB against kerosene because of the larger size of the hydrophobic part of the XSB molecule. The petroleum acids have high interfacial activity and can adsorb onto the interface. For ASB solutions, the synergism mixed adsorption of betaine and acid molecules lowers IFT values. On the one hand, the partly displacement of XSB molecules by petroleum acid at the interface results in the increase of IFTs. Therefore, resins, aromatics, and acidic fractions show strong effects on IFTs of betaine solutions. On the other hand, asphaltenes and saturates have little effect on interfacial properties. Moreover, the hydrophilic part of the betaine molecule at the interface may vary its orientation from vertical to flat with aging time. Therefore, the dynamic IFT curves of ASB solutions against model oils show “V” shape for resins, aromatics, and acidic fractions.     

含氟表面活性剂溶液的动态表面张力研究

本文研究了阳离子氟表面活性剂CF₃CF₂CF₂O(CF(CF₃)CF₂O)₂CF(CF₃)CONH(CH₂)₃N⁺(C₂H₅)₂CH₃I^-(简写FC-4 )的动态表面性质，利用Krüss K12和MBP动态表面张力仪分别测定了该体系的平衡表面张力和动态表面张力。由平衡表面张力测定结果得到了临界胶束浓度和表面吸附量。利用渐进的Ward and Tordai方程对动态数据进行了分析。结果表明：在吸附的最初阶段符合扩散控制模型，而在吸附的后期，证明了吸附势垒的存在，表明在吸附后期属于混合动力学模型。计算得出25 ℃时，该体系势垒约在25到35 kJ/mol. 由于氟表面活性剂分子间作用力小，表面压是导致吸附势垒的主要原因。     

Studies of Synergism in Binary Alkylbenzene Sulfonate Mixtures for Producing Low Interfacial Tensions at Oil/Water Interface

In order to study the synergism between alkybenzene sulfonate and alkybenzene sulfonate, five di-n-alkylbenzene sulfonates were used and the interfacial tensions of single sulfonates and their binary mixtures against a series of alkane homologues were measured. The effects of hydrophilic-lipophilic abilities of sulfonates and mixing ratio on synergism were discussed. It is revealed that the synergistic mechanism derives from the amelioration of the hydrophilic-lipophilic ability of the surfactant system, and the method to achieve synergism is adding the hydrophilic alkybenzene sulfonate to the lipophilic alkylbenzene sulfonate, and ultralow interfacial tensions can be obtained in proper mixing ratios. The results are useful for enhanced oil recovery.      

表面活性剂双水相界面性质的研究

表面活性剂双水相是指正、负离子表面活性剂混合水溶液在一定浓度及混合比 范围内，自发分离形成的两个互不相溶的水相。前文报道了将其作为一种新型萃取 体系，用于生物活性物质的分离。目前有关其相行为、化学物质和生物大分子的分 配方面已有较多研究，但未见两相之间界面化学性质研究的报道。表面活性剂双水 相的形成是一种奇特的相分离现象，两个稀水溶液（含水量可高达99%以上）互不 相溶、平衡共存，其界面结构和界面张力必有其特殊性。     

Study on the Mechanism of Asphaltenes Reducing Oil-Water Interfacial Tension

As high polar components of crude oil, asphaltenes play a significant role in reducing oil-water interfacial tension(IFT). In this paper, the effects of asphaltenes on reducing IFT in the presence of surfactant were compared, and the mechanism of asphaltenes reducing the IFT was studied by the dynamic interfacial tension(DIFT) equation. Whether asphaltenes were added to the oil or 2,5-dimethyl-4-(4-dodecyl) benzene sodium sulfonate(p-S14-4) was added to the water phase, either of all results in the IFT reducing and the IFT is related to the coverage and the mass of asphaltenes adsorption at the interface. In the presence of asphaltenes, the adsorption of the active substances to the interface is not entirely dependent on diffusion, and the process can be divided into three regions. Region I: the IFT rapidly reducing, this process is controlled by diffusion of surfactant; Region II: the IFT reducing slowly, resulted from the lower diffusion rate that is limited due to the aggregates formed by the interaction of asphaltene-asphaltene; Region III: the interaction of asphaltene-asphaltene is broken by the interaction of surfactant-asphaltene. The asphaltene aggregates are reduced and adsorbed rapidly at the interface. Furthermore, the results reveal that the asphaltenes concentration affects the coverage rate and adsorption at the interface.     

Effect of Molecular Weight on the Interfacial Dilational Viscoelasticity of Anionic Polyelectrolyte/Surfactant Systems

In this article, the effect of molecular weight on the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water-octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. PSS/cationic surfactant CTAB systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be well explained by electrostatic interaction. Molecular weight of PSS plays a crucial role in the nature of adsorption film. The complex formed by CTAB and higher molecular weight PSS, which has larger dimension and stronger interaction, results in higher dilational modulus at lower surfactant bulk concentration. In the case of PSS/anionic surfactant SDS systems, the co-adsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational modulus at lower surfactant bulk concentration. For PSS/nonionic surfactant T × 100 systems, PSS may form a sublayer contiguous to the aqueous phase, which has little effect on interfacial tension but slightly decreases dilational modulus.     

Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension

The synthesis of novel CO₂ philic surfactant using maleic anhydride and dipropylene tertiary butyl alcohol is reported. The synthesis involved the esterification of maleic anhydride to produce bis(2-(2-(tert-butoxy)propoxy)propyl) maleate and subsequent sulfonation of the esterified product. Para toluene sulfonic acid was employed as catalyst for the esterification reaction. The esterification reaction was optimized for the maximum yield of 98% of bis(2-(2-(tert-butoxy)propoxy)propyl) maleate. The esterification reaction kinetics employing heterogeneous catalyst were also studied. Although this is a bimolecular reaction, a first order reaction kinetics with respect to acid has been observed. The activation energy was found to be 58.71 kJ/mol. The diester was followed by the sulfonation process and a yield of 85% of surfactant was achieved. The synthesized surfactant successfully lowered down the IFT between CO_2/brine to 1.93 mN/m. This surfactant has a great potential to be used for CO₂-EOR applications.