Electrochemical behaviour of gold, silver, platinum and palladium on the glassy carbon electrode modified by chitosan and its application

The chitosan-modified glassy carbon electrode can be used as a working electrode for the determination of precious metal elements: Au, Ag, Pt, Pd. In low pH medium, the complex anions of these precious elements combine with the protonated group ---NH₃⁺ in the chitosan molecule in the form of an ion-association complex. These metal ions were selectively enriched and we got sensitive anodic stripping current. These elements content in ore, welding material have been determined by this method. The results were consistent with those from standard sample and ICP atomic emission spectrometry method. The possible mechanism of electrochemical reaction has been proposed by the study of CV, UV and FT-Raman spectrometry.     

Influence of anions on the electrooxidation of methanol on a platinum electrode

Russian Chemical Bulletin -     

多巴胺在牛磺酸修饰玻碳电极上的电化学行为及其分析应用

采用电化学聚合法制备了牛磺酸修饰玻碳电极,研究了多巴胺在聚牛磺酸修饰电极上的电化学行为,建立了测定痕量多巴胺的新方法.在pH 7.2的磷酸盐缓冲溶液中,多巴胺在修饰电极上产生一对灵敏的氧化还原峰,采用差分脉冲伏安法测定,其氧化峰电流与多巴胺浓度在8.0×10-8～1.0×10-4 mol/L范围内呈良好的线性关系,检出限为1.0×10-8 mol/L.     

Electrochemical oxidation of luteolin at a glassy carbon electrode and its application in pharmaceutical analysis

Luteolin is a flavonoid reported to occur widely in many medicinal plants. The electrochemical behavior of luteolin was studied in phosphate buffer solution (PBS) of pH 4.0 at a glassy carbon electrode (GCE) by cyclic voltammetry (CV) and differential pulse voltammetric method (DPV). The results indicated the well-defined redox peak of luteolin which was involving two electrons and two protons was observed and the electrode process is adsorption-controlled. The charge transfer coefficient (alpha) was calculated as 0.66. The relationships between oxidation peak current and the concentration of luteolin are linear in the range of 1.0 x 10(-8) - 1.0 x 10(-6) M by DPV method. The detection limit had been estimated as 5.0 x 10(-9) M. The facile and rapid method has been successfully applied to the detection of luteolin in tablets.     

Electrochemical synthesis of gold nanoparticles on the surface of multi-walled carbon nanotubes with glassy carbon electrode and their application

Gold nanoparticles on the surface of multi-walled carbon nanotubes with glassy carbon electrode were prepared using electrochemical synthesis method. The thin films of gold Nanoparticles/multi-walled carbon nanotubes were characterized by scanning electron microscopy, powder X-ray diffraction, and cyclic voltammetry. Electrochemical behavior of adrenaline hydrochloride at gold nanoparticles/multi-walled carbon nanotube modified glassy carbon electrode was investigated. A simple, sensitive, and inexpensive method for determination of adrenaline hydrochloride was proposed.     

Electrochemical determination of mesotrione and its degradation products on glassy carbon electrode

A simple, fast and sensitive analytical method was developed for the quantification of herbicide mesotrione (MES) and its degradation products: 4-(methylsulfonyl)-2-nitrobenzoic acid (MNBA) and 2-amino-4-(methylsulfonyl) benzoic acid (AMBA) using differential pulse voltammetry (DPV). Voltammetric measurements were performed using glassy carbon electrode (GCE). Potential range, pH of the electrolyte and the scan rate were optimised to achieve the lowest detection limits of analytes. The optimal conditions were obtained in a Britton–Robinson (BR) buffer at pH 4.0 for MNBA and at pH 6.0 for MES and AMBA, with the scan rate 0.08 V/s. The potential V for (1) nitro and carbonyl groups of MES, (2) nitro group of MNBA and (3) amino group of AMBA, obtained under optimised conditions, was plotted as a function of a peak current (I). The I(V) dependencies were measured for the following concentration ranges: 0.5–5.0 µM for the nitro group of MES and MNBA, 0.75–5.0 µM and 0.50–8.5 µM for the carbonyl groups of MES, and 0.25–8.5 µM for amino group of AMBA; whereas, the limit of detection was in range 0.07–0.23 µM (20–80 µg/L). The proposed method is the first one that allows the determination of both MES and its degradation products. The practical applicability of these newly developed voltammetric methods was verified by direct determination of MES and its degradation products in model samples of drinking and surface water.     

邻仲丁基苯酚在玻碳电极上的电化学行为

通过循环伏安法(CV)研究了玻碳电极上邻仲丁基苯酚(OSBP)的电化学行为.结果显示:在pH=8.0的磷酸盐缓冲液中,OSBP在玻碳电极上发生的氧化反应是受扩散控制的不可逆等电子、质子转移过程,且氧化产物部分被还原.氧化峰电流与浓度在5.0×10~(-6)～2.0×10~(-4)mol·L~(-1)之间呈良好的线性关系,检出限(S/N=3)为6.60×10~7mol·L~(-1).重复测定的相对标准偏差(RSD)为4.48%(n=7),加标回收率为86.2%～100.5%.结果令人满意.     

Electrochemical behaviour of isatin at a glassy carbon electrode

A rapid, reliable and simple capillary zone electrophoresis method for the determination of organic acids in beverages was developed. The complete separation of oxalic, formic, tartaric, malic, succinic, maleic, glutaric, pyruvic, acetic, lactic, citric, butyric, benzoic, sorbic, ascorbic and gluconic acids can be achieved in less than 3.5 min with a simple electrolyte composed by phosphate as the carrier buffer (7.5 mM NaH₂PO₄ and 2.5 mM Na₂HPO₄), 2.5 mM TTAOH as electroosmotic flow modifier and 0.24 mM CaCl₂ as selectivity modifier, adjusting the pH at 6.40 constant value. Injection was performed in hydrodynamic mode (30 s) and the detection mode was UV direct at 185 nm. The running voltage was −25 kV at thermostated temperature of 25 °C. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is fast because the separation time decrease two, four or, even, six times the separation times of the previous reported CZE methods. It is also simple and cheap due to a low consumption of chemicals and samples. These reasons permit it to be considered adequate for routine analysis of organic acids in beverage samples.     

芦丁修饰电极的电化学特性及其催化性能

研究了芦丁修饰玻碳电极的制备及其电化学性质,探讨了电极反应的机理为ECE过程。研究了它对抗坏血酸和KMnO4的电催化作用:在pH6.0的磷酸盐缓冲溶液(PBS)中,此修饰电极对抗坏血酸有良好的催化氧化作用,而对KMnO4有良好的催化还原作用。     

邻苯二酚在活化玻碳电极上的电化学行为

邻苯二酚( QH2,儿茶酚)等有机化合物是人体内的电活性物质,直接参与人体内的各种生理过程.     

Study of the electrochemical behavior of isorhamnetin on a glassy carbon electrode and its application

The electrochemical behavior of isorhamnetin (ISO) at a glassy carbon electrode was studied in a phosphate buffer solution (PBS) of pH 4.0 by cyclic voltammetry (CV) and differential pulse voltammetric method (DPV). A well-defined redox wave of ISO involving one electrons and one proton appeared. The electrode reaction is a reactant weak adsorption-controlled process with a charge transfer coefficient (α) of 0.586. Based on the understanding of the electrochemical process of ISO at the glassy carbon electrode, analysis of ISO can be realized. Under optimal conditions, the oxidation peak current showed linear dependence on the concentration of ISO in the range of 1.0 × 10⁻⁸ to 4.0 × 10⁻⁷ M and 1.0 × 10⁻⁶ to 1.0 × 10⁻⁵ M. The detection limit is 5.0 × 10⁻⁹ M. This method has been successfully applied to the detection of ISO in tablets.     

Electrochemical behaviour of 2,8-dihydroxyadenine at a glassy carbon electrode

The electrochemical behaviour of 2,8-dihydroxyadenine (2,8-DHA)- the main adenine oxidation product- has been investigated over a wide pH range at a glassy carbon electrode (GCE) using cyclic, differential pulse and square wave voltammetry. The oxidation of 2,8-DHA is a quasi-reversible process, pH dependent and occurs with the formation of a main oxidation product, P(2,8-DHA), that strongly adsorbs on the electrode surface. The reduction of 2,8-DHA also occurs and is a reversible process in the absence of molecular oxygen. In electrolytes with pH between 4 and 9 two consecutive reversible charge transfer reactions were identified. However, it was observed that O(2) interfered with the reductive electron transfer process of 2,8-DHA and that, in the presence of oxygen, the reduction of 2,8-DHA occurs at less negative potentials than in the absence of oxygen.     

黄芩甙在玻碳电极上的电化学行为及其应用

用线性扫描伏安法(LSV)、循环伏安法(CV)和常规脉冲伏安法(NPV)等多种电化学方法研究了黄芩甙在玻碳电极上的电化学行为,并建立了尿样和血清样品中黄芩甙的微分脉冲伏安(DPV)测定法。实验结果表明:黄芩甙在玻碳电极上的吸附符合Frumkin吸附等温式,吸附自由能为-35.01kJ mol。采用整体电解法求得电极反应电子数为2,并结合Nernst方程式推导了反应机理。黄芩甙在玻碳电极上预富集后,在4.20×10-10～1.05×10-5mol L范围内分段呈线性关系,对5.60×10-7mol L黄芩甙溶液连续6次测定的RSD=2.0%,检出限为2.8×10-10mol L。     

甲醇在Pt-Sn/GC上的电催化氧化

直接甲醇燃料电池（DMFC）以环境友好的甲醇为燃料,具有广泛的应用前景。目前使用的阳极催化剂主要是铂族贵金属,成本高,寿命和活性较差,因此,研究出高活性催化剂仍是目前的热点。通常方法是向Pt中添加一种或多种亲氧金属如Ru或Sn等,制成二元或多元铂合金。本文采用循环伏安法在玻碳电极上修饰铂锡合金,金属用量少,操作方便,相比Pt／GC,对甲醇的氧化呈现了较高的催化活性。     

Electrochemical behavior of tryptophan and its derivatives at a glassy carbon electrode modified with hemin

The electrochemical behavior of tryptophan (Trp) and its derivatives, such as indole-3-acetic acid (IAA), 5-hydroxytryptamine (5-HT), 5-hydroxy-indole-3-acetic acid (5-HIAA) and glycyl-tryptophan (Gly-Trp) peptide at a glassy carbon electrode modified with hemin (hemin/GC electrode) by electropolymerization have been investigated in detail. The results showed that the hemin/GC electrode would catalyze the electrochemical oxidation of Trp and its derivatives, based on which a differential pulse voltammetric procedure has been proposed for determination of Trp and its derivatives. Meanwhile, the electrochemical reaction mechanism for these compounds at hemin/GC electrode has been also investigated, and the results indicated that a two electron and two proton transfer was involved in the electrode reaction process.