Spectrophotometric determination of dissolved oxygen with tris(4,7-dihydroxy-1,10-phenanthroline)iron(II)

Tris(4,7-dihydroxy-1,10-phenanthroline)iron(II) reacts rapidly and quantitatively with dissolved oxygen in alkaline aqueous solution. In ammoniacal solution, the reaction is accompanied by the disappearance of the intense red colour of the iron(II) compound, which gives way to the pale gray, slightly-dissociated ion tris(4,7-dihydroxy-1,10-phenanthrolinefiron)(III). By measurement of the absorbance of a solution containing the ferrous compound before and after the injection of an oxygen-containing solution, the concentration of dissolved oxygen in the sample can be accurately determined in the range 1-20 ppm.     

Efficient and stable solid-state light-emitting electrochemical cell using tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) hexafluorophosphate

The complex tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II), prepared via a simple microwave-assisted synthesis, was used to prepare a single-layer light-emitting electrochemical cell. This device reaches a high power efficiency of 1.9 Lum/W at a brightness of 390 cd/m2. Moreover, its lifetime is an order of magnitude longer than that of a similar cell making use of tris(bipyridine)ruthenium(II) as the emitting complex.     

Evaluation of tris(4,7-diphenyl-1,10-phenanthrolinedisulfonate)ruthenium(II) as a chemiluminescence reagent

Previous studies have suggested that tris(4,7-diphenyl-1,10-phenanthrolinedisulfonate)ruthenium(II) (Ru(BPS)₃⁴⁻) has great potential as a chemiluminescence reagent in acidic aqueous solution. We have evaluated four different samples of this reagent (two commercially available and two synthesised in our laboratory) in comparison with tris(2,2′-bipyridine)ruthenium(II) (Ru(bipy)₃²⁺) and tris(1,10-phenanthroline)ruthenium(II) (Ru(phen)₃²⁺), using a range of structurally diverse analytes. In general, Ru(BPS)₃⁴⁻ produced more intense chemiluminescence, but the oxidised Ru(BPS)₃³⁻ species is less stable in aqueous solution than Ru(bipy)₃³⁺ and produced a greater blank signal than Ru(bipy)₃³⁺ or Ru(phen)₃³⁺, which had a detrimental effect on sensitivity. Although the complex is often depicted with the sulfonate groups of the BPS ligand in the para position on the phenyl rings, NMR characterisation revealed that the commercially available BPS material used in this study was predominantly the meta isomer.     

Iron(II) and nickel(II) mixed-ligand complexes containing 1,10-phenanthroline and 4,7-diphenyl-1,10-phenanthroline

Two types of mixed-ligand complexes, i.e. [M(phen)2 (dip)]2+ and [M(phen)(dip)2]2+ (M = iron(II) and nickel(II); phen = 1,10-phenanthroline and dip = 4,7-diphenyl-1,10-phenanthroline) have been prepared from their related tris-complexes, [M(phen)3]2+ by ligand substitution, and isolated by semi-preparative HPLC. Elemental and chromatographic analyses confirm the purity of the isolated complexes while u.v./vis and i.r. spectra were used to identify and characterize them. 1H-n.m.r. and room temperature Mössbauer spectra of the iron(III) complexes were also measured and the results are discussed. In addition, our preliminary results on hypochromicity in the MLCT band and circular dihroism (CD) emerging in the u.v./vis region upon addition of CT(calf thymus)-DNA to the racemic complexes indicated that the iron(II) mixed-ligand complexes interact with CT-DNA.     

Electrogenerated chemiluminescence using solution phase and immobilized tris(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)ruthenium(II)

Electrogenerated chemiluminescence (ECL) with tris(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)rathenium(II) (RuBPS) in solution and immobilized on an electrode surface is investigated. Flow injection analysis with a thin layer electrochemical cell modified for ECL detection is used to determine the analytical utility of solution phase RuBPS and RuBPS immobilized in a cationic polypyrrole derivative. The solution phase reaction of RuBPS with oxalate is investigated with regard to the dependence of ECL emission on RuBPS concentration, carrier stream flow rate, and pH. In the parameter range studied, ECL intensity is not linear with the concentration of RuBPS in the sample. A maximum ECL intensity is observed with a RuBPS concentration of approximately 250 M. Slower linear velocities give greater ECL intensities which is the opposite of what is observed for Ru(bpy) ₃ ³⁺ and oxalate. Greater ECL intensity is observed at lower pHs for oxalate and at higher pHs for proline. RuBPS ECL with oxalate yields a working curve with a linear range from 0.1–100 M oxalate. Solution phase ECL is observed for RuBPS and other amines such as NADH, proline, tripropylamine, and antibiotics including streptomycin and gentamicin. RuBPS is also immobilized by electrochemical polymerization of 1-methyl-3-(pyrrol-1-ylmethyl)pyridinium chloride (MPP) in the presence of RuBPS. This polymer-modified electrode yields ECL for oxalate and for amines.Deceased     

Concurrent sensing of benzene and oxygen by a crystalline salt of tris(5,6-dimethyl-1,10-phenanthroline)ruthenium(II)

The complex [Ru(5,6-Me2Phen)3]tfpb2 has been examined as a solid-state benzene and oxygen sensor. The crystalline solid undergoes a reversible vapochromic shift of the emission lambda max to higher energy in the presence of benzene. Additionally, in the presence of oxygen the solid exhibits linear Stern-Volmer quenching behavior. When simultaneously exposed to benzene vapor and oxygen the crystals uptake benzene which inhibits the diffusion of oxygen in the lattice; very little quenching is observed. However, when benzene is removed from the carrier gas, partial loss of benzene occurs and oxygen diffusion is restored resulting in quenching of the emission. The practicality of this crystalline solid as a benzene sensor was investigated by examination of a lower concentration of benzene vapor (0.76%).     

Molecular distortion effect on ff-emission in a Pr(III) complex with 4,7-diphenyl-1,10-phenanthroline.

The electronic and structural behaviour of a Pr(III) complex with 4,7-diphenyl-1,10-phenanthroline, [Pr(bathophen)(2)(NO(3))(3)], is investigated with respect to the effect of configuration changes on the Pr(III) centre. [Pr(bathophen)(2)(NO(3))(3)] luminesces from the excited states of the ligand and the metal ion. The fluorescence, ff-emission ((1)D(2)-->(3)H(4)), and phosphorescence bands appear at 394, 608.2 and 482 nm, respectively, in the solid state. In acetonitrile, the complex also shows multiple emissions. From the time-resolved emission and the lifetime measurements, the excitation energy-transfer in [Pr(bathophen)(2)(NO(3))(3)] is clarified, that is, the upper excited triplet level of the ligand acts as an energy donor, while the (1)D(2) levels of Pr(III) is the acceptor. Additionally, the emission phenomena of the complex can be modified by molecular distortion, particularly by rotation of the phenyl groups in the ligand.     

Microdetermination of iron in plant tissue with 4,7-diphenyl-1,10-phenanthroline

A method is described for the wet digestion and colorimetric determination of small amounts of iron in plant tissues. The wet digestion uses a mixture of sulphuric and nitric acids instead of perchloric acid; a volumetric flask is used for weighing, digestion, and dilution. The iron complex with 4,7-diphenyl-1,10-phenanthroline is extracted into hexanol.     

Mono- and di-nuclear oxorhenium(V) complexes of 4,7-diphenyl-1,10-phenanthroline

The reactions of [ReOX₃(AsPh₃)₂] (X = Cl, Br) with 4,7-diphenyl-1,10-phenanthroline (dpphen) have been examined and the complexes [ReO(OMe)X₂(dpphen)] and [Re₂O₃X₄(dpphen)₂]·2/3CH₂Cl₂ (X = Cl, Br) have been obtained. They were characterized by IR, UV–Vis spectroscopy, and single crystal X-ray analysis has been performed for [ReO(OMe)Cl₂(dpphen)] and [Re₂O₃Br₄(dpphen)₂]·2/3CH₂Cl₂. The nature of the frontier orbitals of [ReO(OMe)Cl₂(dpphen)] and [Re₂O₃Br₄(dpphen)₂] and the electronic transitions involved in the absorption spectra have been studied by means of the density functional and time-dependent density functional methods.     

Immobilization of tris(1,10-phenanthroline)ruthenium with graphene oxide for electrochemiluminescent analysis

Electrochemiluminescence (ECL) of ruthenium complexes has broad applications and the immobilization of Ru(bpy)₃²⁺ has received extensive attention. In comparison with Ru(bpy)₃²⁺, Ru(phen)₃²⁺ can be immobilized more easily because of its better adsorbability. In this study, immobilization of Ru(phen)₃²⁺ for ECL analysis has been demonstrated for the first time by using graphene oxide (GO) as an immobilization matrix. The immobilization of Ru(phen)₃²⁺ is achieved easily by mixing Ru(phen)₃²⁺ with GO without using any ion exchange polymer or covalent method. The strong binding of Ru(phen)₃²⁺ with GO is attributed to both the π–π stacking interaction and the electrostatic interaction. The Ru(phen)₃²⁺/GO modified electrode was characterized by using tripropylamine (TPA) as the coreactant. The linear range of TPA is from 3 × 10⁻⁷ to 3 × 10⁻² mol L⁻¹ with the detection limit of 3 × 10⁻⁷ mol L⁻¹. The ECL sensor demonstrates outstanding long-term stability. After the storage in the ambient environment for 90 days, the ECL response remains comparable with its original signal.     

Dependence of calibration sensitivity of a polysulfone/Ru(II)-tris(4,7-diphenyl-1,10-phenanthroline)-based oxygen optical sensor on its structural parameters

The optimum performance of an optical oxygen sensor based on polysulfone (PSF)/[Ru(II)-Tris(4,7-diphenyl-1,10-phenanthroline)] octylsulfonate (Ru(dpp)OS) was checked by carefully tuning the parameters affecting the membrane preparation. In particular, membranes having thickness ranging between 0.2 and 8.0 μm with various luminophore concentrations were prepared by dip-coating and tested. The membrane thickness was controlled by tuning the solution viscosity, and was measured both by secondary ion mass spectrometry (SIMS) and by visible spectroscopy (Vis). Luminescence-quenching-based calibration was a single value of the Stern-Volmer constant (K^′SV) for membranes containing up to 20 mmol Ru(dpp) g⁻¹ PSF (1.35 μm average thickness). The K^′SV value decreased for larger concentration. The highest sensitivity was obtained with membrane thickness around 1.6 μm, having a response time close to 1 s. Thicker membranes exhibited an emission saturation effect and were characterized by longer response time. The K^′SV behavior was interpreted on the basis of a mathematical approach accounting for the contribution of luminescence lifetime (τ₀), oxygen diffusion coefficient (DO₂) and oxygen solubility inside the membrane (sO₂) establishing the role of all of them and allowing their experimental determination. Moreover, a simple experimental way to estimate K^′SV without needing calibration was proposed. It was based either on the light emission asymmetry or on the percent variation of light emission on passing from pure nitrogen to pure oxygen.     

Application of the thermal lens effect for determination of iron(II) with 4,7-diphenyl-1,10-phenanthroline disulfonic acid

A heat-induced refractive index change is used to increase the sensitivity of the spectrophotometric determination of iron(II) in a dual-beam system. An argon ion laser (514.5 nm) is used as the heating source and the intensity variation of a helium—neon laser (632.8 nm) is measured. The sensitivity is increased 7.3 times compared with spectrophotometry; the detection limit is 3 × 10^-7 M.     

A novel luminescent lifetime-based optrode for the detection of gaseous and dissolved oxygen utilising a mixed ormosil matrix containing ruthenium (4,7-diphenyl-1,10-phenanthroline)3Cl2 (Ru.dpp)

A novel luminescent lifetime optrode is presented for the detection of gaseous and dissolved oxygen. The optrode utilises ruthenium (4,7-diphenyl-1,10-phenanthroline)₃Cl₂ as the sensing fluorophore immobilised in a hydrophobic ormosil matrix. The ormosil matrix is synthesised at room temperature from octyltriethoxysilane and methyltriethoxysilane precursors. Investigations of different ormosils were conducted and the most effective one was selected for optrode production. Optrodes were tested for responses to gaseous and dissolved oxygen. Their responses were modelled using traditional two-site or two-exponential methods and feed-forward artificial neural networks. Comparison of the two modelling methodologies is presented and further improvements in modelling and ormosil design are suggested.     

Micellar effect upon the reaction of tris(4,7-diphenyl-1,10-phenanthrolinedisulphonato)iron(II) ion with hydroxide in water

Summary Reaction of tris(4,7-diphenyl-1,10-phenanthrolinedisulphonato)iron(II) ion with hydroxide ion is strongly accelerated by cationic micellar systems. Kinetics both in water and in cationic micelles are consistent with a mechanism of consecuive reactions with a reversible step, and the rate constants have been determined. Results in micelles are explained in terms of thepseudo-phase ion-exchange and mass-action kinetics models, and they show that micelles speed the reaction by an authentic catalytic effect by stabilization of transition state of the reaction.     

Kinetics of the reaction of tris(4,7-diphenyl-1,10-phenanthroline-disulphonate)iron(II) ion with hydroxide ion in water

Summary The kinetics of the hydrolysis of the tris(4,7-diphenyl-1,10-phenanthrolinedisulphonate)iron(II) ion has been studied. The results are consistent with a consecutive reaction mechanism with a reversible step, and from the analysis of the kinetic results the rate constants have been determined.