Microwave-assisted extraction of solanesol from tobacco leaves

Solanesol is the starting material for many high-value biochemicals, including co-enzyme Q10 and Vitamin K analogues. In the present study, a microwave-assisted extraction (MAE) technique has been developed for the fast extraction of solanesol from tobacco leaves. Compared to heat-reflux extraction, MAE reduced extraction time and obtained higher percentage extracted of solanesol. The effect of microwave on cell destruction of plant material was observed by scanning electron microscopy (SEM). The microwave-assisted extraction efficiency was further improved by adding NaOH into the extraction solvent, and the maximum percentage extracted of solanesol reached 0.91% (weight solanesol/weight tobacco) in 40 min at an optimum NaOH concentration of 0.05 M. The developed MAE integrated with saponification process provided an efficient method for solanesol recovery from tobacco leaf materials, and it also alleviated emulsification in the following separation and purification procedure as well.     

GC/MS of terpenes in walnut-tree leaves after accelerated solvent extraction

Terpenes, e. g. (+)-alpha-pinene, (-)-camphene, (-)-(-pinene, myrcene, R-(+)-limonene, eucalyptol, (+/-)-linalool, (-)-bornyl acetate, (-)-trans-caryophyllene, and alpha-humulene were determined in leaves of walnut trees from the Juglandaceae family (walnut tree, royal (J. regia L.), black (J. nigra L.), and Siebold (J. sieboldiana, var. Cordiformis Lam.) using gas chromatography with mass spectrometric detection. Terpenes were repeatedly (3 cycles, 5 min each) extracted from leaves of walnut trees by accelerated (pressurized) solvent extraction (ASE) 150 bar and 120 degrees C. The efficiency of ASE extraction was superior to that of steam distillation, solvent extraction according to Soxhlet, sonication, and extraction by agitation. Differences in relative concentrations and distribution of terpenes were studied in dependence on the species of walnut tree and on different locations.     

Supercritical fluid extraction of cynaropicrin and 20-hydroxyecdysone from Leuzea carthamoides DC

Leuzea carthamoides is an adaptogenic plant containing biologically active compounds as ecdysteroids and guaianolide-type sesquiterpene lactones, conventionally extracted from the plant with ethanol. It may be a potential source of the mentioned natural compounds. Ethanol-modified near-critical CO(2) was used as selective solvent with the aim to increase the level of 20-hydroxyecdysone in the extract from L. carthamoides roots and to remove selectively cynaropicrin, a sesquiterpene lactone of bitter taste, from the leaves. The extraction conditions were varied (pressure 20-28 MPa, temperature 40-60 degrees C, ethanol concentration in the solvent 0-7.1%) and the extraction yield and extract composition were compared with the results of ethanolic extraction. The supercritical fluid extraction (SFE) from finely powdered plant was controlled by phase equilibrium. Cynaropicrin was quantitatively removed from the leaves where 89% of 20-hydroxyecdysone was retained. The extraction yield of 20-hydroxyecdysone from roots with ethanol-modified CO(2 )was lower by 30% than with ethanol but its concentration in the extract was higher by 67%.     

Isolation and determination of ginsenosides in American ginseng leaves and root extracts by LC-MS

Ginseng saponins (ginsenosides) were extracted from the root and leaves of locally cultivated American ginseng (Panax quinquefolium L.). For the isolation of compounds from plant samples three different extraction methods were utilized: accelerated solvent extraction, the ultrasound-assisted solvent extraction and mechanical shaking assisted solvent extraction. The separation of compounds was achieved with a water–acetonitrile gradient system using a C18 reversed-phase column. Target compounds were identified in MS² and MS³ experiments. The relative distribution of these ginsenosides in each root and leaf extract was established. The limit of detection of the method was less than 30 ng/ml. Recovery of ginseng saponins in spiked samples exceeded 80%, while the relative standard deviation ranged from 7.1 to 9.1%. The total concentrations of ginsenosides were 41 and 13 mg/g in root and leaves.     

Effect of plant matrix and fluid ethanol concentration on supercritical fluid extraction efficiency of schisandrin derivatives

An investigation of the effect of plant matrix on the supercritical fluid extraction efficiency of five schisandrin derivatives is reported, exhibiting a great difference with respect to extraction efficiency depending on the matrix. Pure supercritical CO2 at 60 degrees C and 34.0 MPa cannot fully recover schisandrin derivatives from the leaves as much as from the other matrices. Only 36.9% of these compounds are extracted from leaves of Schisandra chinensis by supercritical CO2 in comparison with organic solvent extraction. However, more than 80% of schisandrin derivatives are obtained from both stem and fruit parts. Ethanol addition also shows a different effect depending on plant matrix; that is, CO2 modified with 10% ethanol could enhance the yield of schisandrin derivatives from leaves by four times when compared with that of pure CO2, but it has little effect on both stems and fruits.     

Separation of Rubisco in Extracts of Plant Leaves by Capillary Electrophoresis with Sieving Polymers

ABSTRACT

Rubisco (Ribulose-1, 5-bisphosphate carboxylase/oxygenase; EC 4.1.1.39) was separated in extracts of plant leaves by capillary electrophoresis with replaceable polymers. Rubisco extracted from plant leaves was fully denatured into small (15.8 kDa) and large (52.9 kDa) subunits in the presence of excess sodium dodecylsulfate (SDS). SDS-Rubisco complexes were separated by using an uncoateda fused silica capillary filled with a replaceable polymer solution, with detection at 220 nm. A calibration plot of Rubisco concentration in plant extract versus peak area was linear over the concentration range of 0.09-1.2 mg mL^?1 with a correlation coefficient (r²) of 0.995 and a detection limit of 0.05 mg mL^?1. The reproducibility of migration times was less than 0.27% RSD (n=5) and reproducibility of peak area was better than 6.9% The recovery of Rubisco in leaf tissues through the extraction and analysis procedure was 78.2% (±4.8) and through the analysis procedure alone was 96.9% (±5.1). The proposed method was used for the quantification of Rubisco in protein extracts from leaves of a variety of plant species.     

Nelumbo nucifera leaves as source of water-repellent wax: Extraction through polar and non-polar organic solvents

Nelumbo nucifera leaves are rich source of natural wax possessing super-hydrophobic properties. It provides protection to them from ecological turbulences and climatic wear and tear. In this study, various experiments have been conducted to observe the yield of extraction and the determination of various functional groups, which are present in natural wax, derived from Nelumbo nucifera leaves. The natural wax has been extracted from lotus leaves through non-polar (hexane) and polar (ethanol) solvent via different extraction methods. The superhydrophobic wax has been successfully extracted with hexane. Whereas, ethanol did not extract the water-repellent wax of lotus leaf. Considering the cumulative amount, i.e. (desired + undesired), the maceration shows the extraction of 2.9% (%w/w, through hexane) and 10.2% (%w/w, through ethanol), while it was found 2.5% (%w/w, cycle period 15 min) and 9.0% (%w/w, cycle period 26 min) respectively, in case of Soxhlet extraction technique. For this specific case of natural wax recovery from biomass (lotus leaf), the maceration (traditional method) resulted a little bit superior extraction yield in comparison to the Soxhlet extraction method for extraction of crude wax. In the case of non-polar solvent (hexane), an extraction yield of 1.97% (%w/w) through maceration method was observed while in the case of non-polar solvent (ethanol), an extraction yield of 1.62% (%w/w) through Soxhlet extraction was observed. The TLC analysis on both types of extracts was performed. For the detection of various hydrocarbon chains in the crude wax extracts, FTIR was also performed. Topography of wax surface and wax-coated waterproof fabric was compared through SEM.     

Separation and characterization of sucrose esters from Oriental tobacco leaves using accelerated solvent extraction followed by SPE coupled to HPLC with ion‐trap MS detection

Sucrose esters (SEs) were successfully extracted from Oriental tobacco leaves using a new methodology based on accelerated solvent extraction followed by hydrophilic–lipophilic balanced cartridge cleanup step. The SEs were detected by HPLC with ion‐trap MS detection using an electrospray interface operated in the positive ion mode. This methodology combines the high efficiency of extraction provided by a pressurized fluid and the highly sensitive characterization offered by ion‐trap MS. Under the optimized conditions, 14 SEs were first identified among a total of 23 SEs found in Oriental tobacco leaves. Under the same conditions, only four new SEs were extracted by using traditional ultrasound‐assisted extraction and liquid–solid extraction methods. The present method might be potentially useful in high‐efficiency extraction and sensitive characterization of SEs from complex matrices such as tobacco leaves.     

Distribution of sapogenins in morphological Medicago sativa L. parts: Comparison of various extraction techniques

Saponins in plant extracts were indirectly determined by estimation of the content of sapogenins. The first step of determination is extraction with high efficiency. One conventional extraction technique (maceration) and two modern ones (accelerated solvent extraction and supercritical fluid extraction) were compared. Methanol and ethanol were used as solvents or co‐solvents. The results were supported by statistical analysis. Saponins were extracted from leaves, roots, and sprouts of Medicago sativa. Acid hydrolysis, purification, and determination by high‐performance liquid chromatography with evaporative light scattering detector were used. The content of sapogenins was the highest in the roots. Smaller amounts of sapogenins were found in sprouts and the smallest ones in leaves. The main ingredient was medicagenic acid with mean concentration of 621.8 µg/g in roots, 456.7 µg/g in sprouts, and 471.3 µg/g in leaf extract. The highest content of sapogenins in extract was obtained after maceration with methanol; however, this method is nonselective in relation to biologically active compounds. Due to the possibility of using the obtained extracts with sapogenins in the cosmetic or pharmaceutical industry, the selection of extraction techniques and solvents is a very important aspect. Additionally, the chosen technique should be considered eco‐friendly and consistent with the assumptions of “green chemistry.”     

A systematic study on extraction of total arsenic from down-scaled sample sizes of plant tissues and implications for arsenic species analysis

An easily feasible, species-conserving and inexpensive protocol for the extraction of total arsenic and arsenic species from terrestrial plants was designed and applied to the investigation of accumulation and metabolization of arsenite (As(III)), arsenate (As(V)), monomethylarsonate (MMA(V)), and dimethylarsinate (DMA(V)) by the model plant Tropaeolum majus. In contrast to existing extraction methods hazardous additives and elaborate procedures to enhance the extraction yields were omitted. The proposed protocol is suited to down-scale the sample sizes used for the extractions and to promote a compartmentally resolved analysis of the arsenic distribution within individual leaves, leaf stalks, and stems instead of the conventional extraction of pooled samples. In a two-step extraction, the high extraction efficiencies (85-92%) for arsenic achieved by phosphate buffer from larger amounts (200mg) of homogenized leaf material in a one-step extraction, could be enhanced to 94-100% in a second extraction step. A strong dependence of the arsenic extractability on the type of arsenic species accumulated in the tissue as well as on the type of the tissue (leaf, leaf stalk, stem) was found. For the extraction of 5mm long segments cut from individual leaves without previous homogenization of the plant parts yields between 75 and 93% depending on arsenic species prevailing in the cells were obtained using 1 or 10mM phosphate buffer. The total extraction and analysis protocol was validated using a standard reference material as well as by spiking experiments. The arsenic species analysis by IC/ICPMS revealed a number of nine unidentified metabolites in the plant extracts in addition to the species MMA(V), DMA(V), As(III), and As(V) that were provided to the plants during their growth phase.     

Biosurfactant trehalose lipid‐enhanced ultrasound‐assisted micellar extraction and determination of the main antioxidant compounds from functional plant tea

Hydrosoluble trehalose lipid (a biosurfactant) was employed for the first time as a green extraction solution to extract the main antioxidant compounds (geniposidic acid, chlorogenic acid, caffeic acid, and rutin) from functional plant tea (Eucommia ulmoides leaves). Single‐factor tests and response surface methodology were employed to optimize the extraction conditions for ultrasound‐assisted micellar extraction combined with ultra‐high‐performance liquid chromatography in succession. A Box‐Behnken design (three‐level, three‐factorial) was used to determine the effects of extraction solvent concentration (1–5 mg/mL), extraction solvent volume (5–15 mL), and extraction time (20–40 min) at a uniform ultrasonic power and temperature. In consequence, the best analyte extraction yields could be attained when the trehalose lipid solution concentration was prepared at 3 mg/mL, the trehalose lipid solution volume was 10 mL and the extraction time was set to 35 min. In addition, the recoveries of the antioxidants from Eucommia ulmoides leaves analyzed by this analytical method ranged from 98.2 to 102%. These results indicated that biosurfactant‐enhanced ultrasound‐assisted micellar extraction coupled with a simple ultra‐high‐performance liquid chromatography method could be effectively applied in the extraction and analysis of antioxidants from Eucommia ulmoides leaf samples.     

Simultaneous co-extraction of organometallic species of different elements by accelerated solvent extraction and analysis by inductively coupled plasma mass spectrometry coupled to liquid and gas chromatography

This paper describes the development of an accelerated solvent extraction methodology that is capable of simultaneously extracting organometallic species of As, Sn and Hg in a semi-automated manner. Accelerated solvent extraction (ASE) methods based on previous research on the separate extraction of organotin and -arsenic species in our laboratory were adapted for the co-extraction of six different species from an oyster tissue certified reference material (BCR 710). For the first time, the extraction of MeHg by this technique is also investigated. The proposed ASE conditions employed 50% acetic acid in methanol at a temperature of 100 degrees C with up to five consecutive extraction cycles of 3 minutes. Extraction efficiencies for organoarsenic species ranged from 80% (dimethylarsinic acid, DMA) to 99% for arsenobetaine (AsB). Species of toxicological interest, such as dibutyltin (DBT), tributyltin (TBT) and methylmercury (MeHg), were extracted with mean recoveries of 81, 84 and 76%, respectively. The extracted species were analysed by gas chromatography/inductively coupled plasma mass spectrometry (GC/ICPMS; DBT, TBT and MeHg) and liquid chromatography/inductively coupled plasma mass spectrometry (LC/ICPMS; MMA, DMA, AsB) after ethylation with sodium tetraethylborate or dilution with water, respectively. In addition to those species for which the extraction efficiency was assessed during this study, a further five arsenic species (arsenite, arsenate and three unidentified species), as well as monobutyltin (MBT) and mono-, di- and triphenyltin, could also be extracted from other matrices. The developed ASE method provides a significant improvement over many currently available routine monitoring methods for trace element speciation due to the fact that it is capable of extracting several species of toxicological interest simultaneously and quantitatively.     

Study of factors influencing pressurised solvent extraction of polar steroids from plant material. Application to the recovery of withanolides

Summary Pressurised solvent extraction was applied to the extraction of three withanolides from the leaves oflochroma gesnerioides. A study was carried out of the influence of various parameters on the extraction efficiency and kinetic parameters; these included the nature of the extracting solvent, its flow rate, the pressure and temperature, as well as the particle size of the plant material. The pressurised solvent extraction method compared to a conventional Soxhlet extraction showed similar recoveries and extraction selectivity but the total handling time and solvent volume were dramatically reduced.     

Ultrasound-assisted extraction of soy isoflavones

Efficiency in extracting four isoflavone derivatives (daidzin, glycitin, genistin and malonyl genistin) from freeze-dried ground soybeans was compared for mix-stirring extraction and ultrasound-assisted extraction, using different solvents and extraction temperatures with both. The efficiency of the extraction of soy isoflavones was improved by ultrasound but was dependent on the solvent employed. Optimization of the ratios of sample quantity to solvent volume and length of extraction time was also performed. Isoflavones can be quantitatively extracted from soybeans with 50% ethanol at 60 degrees C using ultrasound-assisted extraction in 20 min.     

Microwave-assisted extraction of quercetin and acid degradation of its glycosides in Psidium guajava leaves.

Microwave-assisted extraction (MAE) and microwave-assisted hydrolysis (MAAH) were developed for the sample preparation of guava leaves prior to GC determination of quercetin and its glycosides. Ethanol was selected as the solvent. The optimum MAE temperature, particle size, solvent volume and MAE time are 120 degrees C, 40 - 60 mesh, 20 mL and 5 min, respectively; the optimum MAAH temperature and time, HCl concentration, solvent are 100 degrees C, 5 min, 1.2 mol L(-1) HCl and ethanol, respectively.     

Stability of pesticides on solid-phase extraction disks after incubation at various temperatures and for various time intervals: interlaboratory study

An interlaboratory study was conducted at 8 locations to assess the stability of pesticides on solid-phase extraction (SPE) disks after incubation at various temperatures and for various time intervals. Deionized water fortified with selected pesticides was extracted by using 2 types of SPE filtration disks (Empore C18 and Speedisk C18XF), and after extraction, the disks were incubated at 3 temperatures (25, 40, and 55 degrees C) and for 2 time intervals (4 and 14 days). Deionized water was fortified with atrazine, carbofuran, and chlorpyrifos by all participating laboratories. In addition, some of the laboratories included 2 of the following pesticides: metolachlor, metribuzin, simazine, chlorothalonil, and malathion. Concurrently, fortified water samples were extracted with the incubated samples by using each disk type at 4 and 14 days. Pesticides had equivalent or greater stability on > or = 1 of the C18 disk types, compared with storage in water. The lowest recoveries of carbofuran (6%) and chlorpyrifos (7%) were obtained at 55 degrees C after storage for 14 days in incubated water. At 55 degrees C after 14 days, the lowest recovery for atrazine was 65% obtained by using Empore disks. Pesticide-specific losses occurred on the C18 disks in this study, underlining the importance of temperature and time interval when water is extracted at remote field locations and the SPE disks containing the extracted pesticides are transported or shipped to a laboratory for elution and analysis.     

Non-polar Solvent Microwave-Assisted Extraction of Volatile Constituents from Dried Zingiber Officinale Rosc.

A new method, non-polar solvent microwave-assisted extraction （NPSMAE）, was applied to the extraction of essential oil from Zingiber officinale Rosc. in closed-vessel system. By adding microwave absorption mediumcarbonyl iron powders （CIP） into extraction system, the essential oil was extracted by the non-polar solvent （ether） which can be heated by CIP. The constituents of essential oil obtained by NPSMAE were comparable with those obtained by hydrodistillation （HD） by GC-MS analysis, which indicates that NPSMAE is a feasible way to extract essential oil from dried plant materials. The NPSMAE took much less extraction time （5 min） than HD （180 min）, and its extraction efficiency was much higher than that of conventional polar solvent microwave-assisted extraction （PSMAE） and mixed solvent microwave-assisted extraction （MSMAE）. It can be a good alternative for the extraction of volatile constituents from dried plant samples.     

Optimization of a microwave-assisted extraction method for the analysis of polychlorinated biphenyls in ash samples

An alternative method for the extraction of polychlorinated biphenyls (PCBs) in ash samples, which is less time and solvent consuming than Soxhlet extraction, is presented. A study was carried out to evaluate the possibilities of microwave-assisted extraction (MAE) to determine exactly which parameters affect the efficiency of the process, since direct extrapolation of extraction conditions for PCBs in other solid matrices, failed when applied to coplanar congeners in ash samples. Influence of the organic solvent on the yield of the extraction was first evaluated using two ash samples with different percentages of carbon. Once the extraction solvent was fixed, the effects of solvent volume, extraction temperature and extraction time were investigated using an experimental design. It was found that the volume of organic solvent played a more important role in the extraction efficiency than the other factors. In the optimal conditions microwave extractions were performed at 110 degrees C. for 10 min and using 30 ml of toluene. Recoveries higher than 80% were obtained for all the highly chlorinated congeners. including coplanar species, in a spiked ash sample containing a relatively high concentration of carbon. The proposed method was also applied to the determination of PCBs in a reference material of urban dust. Recoveries were similar to those obtained for spiked ash samples.     

Multiresidue determination of organophosphorus pesticides in ginkgo leaves by accelerated solvent extraction and gas chromatography with flame photometric detection

A rapid and simple method using accelerated solvent extraction and solid-phase extraction cleanup was developed and validated for the determination of 15 organophosphorus pesticides in ginkgo leaves by capillary gas chromatography with flame photometric detection. The pesticides were extracted at 100 degrees C under 1500 psi pressure in <20 min. The average recovery from 10 g ginkgo leaves, fortified at 3 levels ranging from 0.05 to 1.00 mg/kg, was 95.2% with a relative standard deviation of 4.6%. The limits of detection ranged from 1.11 x 10(-3) mg/kg (dimethoate) to 4.44 x 10(-3) mg/kg (dichlorvos). The proposed method showed acceptable accuracy and precision while minimizing environmental concerns, time, and labor. Furthermore, the method could be easily applied to the monitoring of these 15 organophosphorus pesticides in ginkgo leaves.     

Kinetic Study on Chlorophyll and Antioxidant Activity from Polyscias fruticosa (L.) Harms Leaves via Microwave-Assisted Extraction

Polyscias fruticosa (L.) leaves contain significant bioactive compounds with high antioxidant activity such as chlorophylls, total polyphenols, etc. but these have still been underutilized. In this study, the kinetics of chlorophyll and antioxidant activity extraction from P. fruticosa leaves by microwave-assisted extraction (MAE) were investigated. Microwave power was 300, 450, or 600 (W); the ratio of material/solvent varied from 1:40 to 1:80 (g/mL). In this study, the second-order kinetic model successfully predicted the change of chlorophyll and antioxidant activity during MAE. The increase of microwave power or/and the solvent amount increased saturated extraction efficiency and the extraction rate constant. However, the saturated concentration of chlorophyll and antioxidant activity increased with the increment of microwave power and the decrease in solvent amount.