甲基丙烯酸酯毛细管整体柱分离微囊藻毒素的研究

以甲基丙烯酸丁酯为单体,乙二醇二甲基丙烯酸酯为交联剂,在致孔剂存在的条件下原位聚合制备了甲基丙烯酸丁酯毛细管整体柱(150 μm i.d.)。实验中优化了用此整体柱分离3种微囊藻毒素(MC-LR,-YR和-RR)的色谱条件(流动相种类、缓冲溶液浓度、pH、流动相流速),建立了微囊藻毒素的整体柱毛细管液相色谱分离方法,该法可以在9 min之内实现3种微囊藻毒素的基线分离。将该方法应用于实际水样中微囊藻毒素的分析,成功实现了培养水样和巢湖水样中微囊藻毒素的快速分离,两种样品中均检测到MC-LR。结果表明,所制备的甲基丙烯酸酯毛细管整体柱具有良好的重现性、渗透性,在微囊藻毒素的常规检测中具有很好的应用前景。     

高效液相色谱法测定地表水中的微囊藻毒素-LR

对地表水中的微囊藻毒素-LR进行高效液相色谱法（HPLC）测定,采用V乙醇：V水（含0．1％三氟乙酸）=45：55为流动相,微囊藻毒素．LR在ODS色谱柱上获得理想的分离效果。采用含0．1％三氟乙酸的乙醇溶液在样品前处理提取中获得较高的提取效率,通过优化前处理及检测条件,有效地去除了干扰,获得了简便、安全、有效的检测效果。     

固相萃取高效液相色谱法测定水中痕量-微囊藻毒素

微囊藻毒素是有害的蓝藻水华释放的有毒代谢物,对人类及环境具有很大危害性。建立了固相萃取－高效液相色谱测定水中痕量藻毒素的方法。该法对两种常见微囊藻毒素MC－LR、MC－RR的检测限为0．02－0．05μg/L,线性定量范围为0．1－50μg/L。应用该法分析了天然水样,表明方法具有实用性。     

直接进样-高效液相色谱-串联质谱法测定地表水中9种微囊藻毒素

建立水样直接进样-高效液相色谱-串联质谱分析地表水中9种微囊藻毒素(MCs)的方法.水样过滤后注入高效液相色谱,在电喷雾离子源正离子多反应模式下进行检测.对色谱及质谱条件进行优化,对过滤滤膜进行筛选,并采用本方法测定了实际样品.研究表明,地表水中9种MCs的浓度与峰面积呈良好的线性关系,回收率92.4％～100.1％,相对标准偏差均＜7％.方法的检出限为0.007～0.047 μg/L,能够满足WHO及我国地表水中关于微囊藻毒素控制标准的要求.本方法灵敏、快速,适于地表水中9种MCs的测定.     

超高效液相色谱-串联质谱分析蓝藻中微囊藻毒素的总量

建立了超高效液相色谱-串联质谱对蓝藻中微囊藻毒素总量的测定方法。样品采用乙酸及甲醇溶液进行抽提后离心,上清液经浓缩用固相萃取柱进行富集、纯化,洗脱液经0.025 mol/L KMnO4和饱和NaIO4溶液在pH 9条件下氧化1h。以BEH C18色谱柱进行梯度洗脱分离,采用离子监测质荷比(m/z 131.10)定量分析。微囊藻毒素总量的回收率在82.0%～98.6%之间。微囊藻毒素总量的检出限为0.80μg/L。该方法适用于测定蓝藻中的微囊藻毒素总量分析。     

金属硫蛋白异构体及亚型异构体的液相色谱分离与质谱鉴别

建立了金属硫蛋白(MT)异构体及亚型异构体的色谱分离与质谱鉴别方法。将金属硫蛋白混合物通过弱阴离子DEAE Sephadex A-25离子交换柱,结合离线电感耦合等离子体质谱(ICP-MS)对锌诱导金属硫蛋白的两个异构体MT-1和MT-2进行分离和检测;利用Sephadex G-25凝胶排阻色谱柱对得到的两个金属硫蛋白异构体进行脱盐;探索脱盐后的金属硫蛋白异构体在不同色谱条件下的C18反相色谱柱上的保留行为,进而实现各个亚型异构体的分离;通过在线电喷雾质谱检测实现了对金属硫蛋白各个亚型异构体的鉴别。结果表明,通过优化色谱条件,由离子交换色谱及凝胶排阻色谱得到的金属硫蛋白各亚型异构体在酸性条件下均得到了良好的分离,质谱检测结果与前人的文献报道结果一致。该方法可使金属硫蛋白各异构体均达到最佳的分离效果。     

超高效液相色谱-串联质谱法同时测定田螺中3种微囊藻毒素

采用超高效液相色谱-串联质谱法同时测定田螺中3种微囊藻毒素(微囊藻毒素-RR、微囊藻毒素-LR、微囊藻毒素-YR)的含量。田螺样品经甲醇-水(85+15)混合液提取,Oasis HLB固相萃取柱净化。以UPLC BEH C18色谱柱为固定相,以不同体积比混合的(A)甲酸(0.1+99.9)溶液和(B)甲醇-乙腈(1+1)混合液为流动相做梯度洗脱,采用电喷雾正离子源模式多反应监测检测。3种微囊藻毒素的质量浓度均在1.0~100.0μg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.05~0.08μg·kg-1之间。以空白样品为基体进行加标回收试验,所得回收率在67.3%~84.2%之间,相对标准偏差(n=6)在6.1%~8.3%之间。     

新型杯[4]芳烃高效液相色谱固定相的制备及表征

合成了一种新型的杯[4]芳烃高效液相色谱键合固定相,考察了它的反相色谱行为．通过对多环芳烃、二取代苯的位置异构体、苯甲酸酯和邻苯二甲酸酯的分离,发现该键合相具有显著的反相特征,对位置异构体具有很高的识别能力,其分离明显优于C18柱,并讨论了可能的分离机理．     

固相萃取-超高效液相色谱-电喷雾串联质谱法同时测定地表水中9种微囊藻毒素

建立了固相萃取-超高效液相色谱-电喷雾串联三重四极杆质谱(SPE-UPLC-ESI-MS/MS)联用技术分析水中9种微囊藻毒素的方法。样品经SPE提取和净化后,以Waters ACQUITY UPLCTM BEH C18色谱柱为分离柱,以含0.1%甲酸乙腈和含0.1%甲酸水作为流动相进行梯度洗脱,电喷雾离子源电离、正离子多反应监测模式质谱进行定性和定量分析。9种微囊藻毒素在0.1～50 μg/L或0.5～100 μg/L质量浓度范围内线性良好,相关系数为0.9990～0.9998,方法的检出限(以3倍信噪比计)为0.1～0.5 ng/L;高、中、低3个添加水平的回收率为75.8%～109%,相对标准偏差为0.49%～10.0%。结果表明,该方法灵敏、准确,检测范围广,分析速度快。应用该方法检测了杭州市两处水库水样中的微囊藻毒素,分别检出了3种和8种微囊藻毒素。     

盘式固相萃取–超高效液相色谱–串联质谱法快速测定环境水样中3种微囊藻毒素

建立盘式固相萃取–超高效液相色谱–串联质谱(UPLC–MS–MS)快速测定环境水样中3种微囊藻毒素(MCs)的方法。环境水样经过盘式固相萃取柱净化,采用Waters BEH C_(18)色谱小柱,以乙腈–0.2%甲酸水溶液为流动相,梯度洗脱分离后,UPLC–MS–MS多级监测正离子模式下外标法进行定性定量分析。3种微囊藻毒素在0.05~10.0μg/L范围内呈现良好线性关系,相关系数均大于0.999 4,方法检出限为0.02 ng/L。对同一环境样品进行0.1,1.0,5.0μg/L 3种浓度的加标回收试验,平均回收率为82.8%~108.8%,测定结果的相对标准偏差为2.1%~10.1%(n=6)。该方法快速、灵敏、准确,可有效应用于环境水样中微囊藻毒素的监测。     

超高效液相色谱-串联质谱法检测螺旋藻保健品中7种微囊藻毒素

采用固相萃取净化结合超高效液相色谱-串联质谱法(UPLC-MS/MS)测定了螺旋藻保健品中7种微囊藻毒素(MCs)。螺旋藻保健品经70%(体积分数)的甲醇超声提取,冷冻离心沉淀杂质后,经HLB柱净化。在Waters ACQUITY UPLCBEH C18色谱柱上以乙腈和0.2 mmol/L乙酸铵水溶液为流动相进行梯度洗脱分离,采用电喷雾离子源正离子模式进行多反应离子监测,外标法定量。7种MC在线性范围内线性关系良好(相关系数(r)不小于0.995);检出限为6.7～33.3 μg/kg,定量限为20.0～100.0 μg/kg。各分析物在阴性螺旋藻保健品中的加标回收率在87.5%～97.9%之间,相对标准偏差(RSD)在1.6%～6.9%之间。该方法准确可靠,灵敏度高,可用于螺旋藻保健品中MC污染的确证定性、定量检测。     

Determination of microcystins in fish by solvent extraction and liquid chromatography

A liquid chromatography electrospray mass spectrometry (LC/ESI/MS) method has been developed to identify and quantify microcystins in fish liver and intestine. Microcystins (MCs) were extracted from 500 mg sample with methanol-water (85:25, v/v) and the extracts concentrated to 250 microl. The parameters were optimized by a full factorial 2(3) design. Neither laborious pre-treatment nor clean up were necessary. MCs were separated using conventional C18 column and an acetonitrile-acidified water (pH 3) gradient. Negative samples (without MCs) were discriminated by liquid chromatography diode array detection (LC/DAD). The limits of detection (LOD) and the limits of quantification (LOQ) resulted equal for MC-RR, MC-YR, and MC-LR and were 0.1 and 0.5 microg g(-1), respectively. MCs recoveries at three levels in spiked samples (0.5-3.0 microg g(-1)) were > 92%, with relative standards deviations (RSDs) < 16% for liver samples and > 68% with RSDs < 18% for intestine samples. The proposed method was applied to determine MC-LR in exposed fish to evaluate the bioaccumulation risk. The results showed the transference of MC-LR from cyanobacterial cells to fish tissues.     

Fluorometric analysis of urinary chondroitin sulfate isomers by HPLC using dansylhydrazine as a prelabeling reagent

Chondroitin sulfate isomers (ChS isomers) were digested with chondroitinase ABC, and the unsaturated disaccharides produced were converted into fluorescent dansylhydrazine derivatives and analyzed by HPLC. The proposed method was applied to the determination of relative amounts of ChS isomers in normal human urine and analytical results showed that chondroitin-6-sulfate and chondroitin-4-sulfate were excreted in large amounts. Moreover, this method was used for the identification of urinary ChS isomers which were extracted from a cellulose acetate strip after carrying out electrophoresis.     

High-pressure liquid chromatography combined with fluorescence detection and solvent extraction for simultaneous determination of coproporphyrins I and III in human urine

A precise and reproducible high-pressure liquid chromatography (HPLC) method for the determination of coproporphyrin I and III isomers (cp isomers) in urine was investigated. The cp isomers were extracted into diethyl ether, the solution was evaporated and the residue dissolved prior to HPLC. The recoveries of both cp isomers were 87.8 +/- 3.2 and 90.0 +/- 2.1% and detection limits (S/N = 3) were 0.07 ng, respectively.     

Optimal strategies for determination of free/extractable and total microcystins in lake sediment

The optimization of analytical procedures for the quantification of free and total microcystins (MCs) in natural sediments was systematically examined based on solvent extraction and Lemieux oxidation. In this optimized analytical procedure, a sequential solvent extraction using 50% (v/v) methanol and EDTA-sodium pyrophosphate was selected as the optimal extraction solvent for free MCs analysis, after which the purified extracts and sediment residuals were applied to the optimized Lemieux oxidation for determination of total MCs in lake sediments. The optimized procedures were shown to be efficient and reliable for the routine analysis of both free and total MCs in lake sediment samples, as indicated by the minimal adverse impact of sediment organic matter on the recovery of free MCs and yield of MMPB (2-methyl-3-methoxy-4-phenylbutyric acid). Finally, the developed procedures were applied to field sediment samples collected from Lake Dianchi during a bloom season and seven of thirty samples showed positive results.     

Synthesis and characterization of novel epoxy resins‐filled microcapsules with organic/inorganic hybrid shell for the self‐healing of high performance resins

Novel microcapsules (MCs) with organic/inorganic hybrid shell were successfully fabricated using epoxy resin as core material and nano boron nitride (BN) and mesoporous silica (SBA‐15) as inorganic shell materials in aqueous solution containing a water‐compatible epoxy resin curing agent. The morphologies, thermal properties and Young's moduli of MCs were investigated. The results indicated that epoxy resins were encapsulated by BN/SBA‐15/epoxy polymer hybrid layer, the resulting MCs were spherical in shape and the introduction of inorganic particles made MCs had rough surface morphology. The mean modulus value of MCs was from 2.8 to 3.1 GPa. The initial decomposition temperature (T_di) of MCs at 5 wt% weight loss was from 309 to 312°C. MCs showed excellent thermal stability below 260°C. The structures and properties of MCs could be tailored by controlling the weight ratio of inorganic particle. When the weight ratio of BN to SBA‐15 was 0.15:0.10, MCs had the highest T_di and modulus. The resulting MCs were applied to high performance 4,4′‐bismaleimidodiphenylmethane/O,O′‐diallylbisphenol A (BMI/DBA) system to design high performance BMI/DBA/MC systems. Appropriate content of MCs could improve the fracture toughness and maintain the glass transition temperature (T_g) of BMI/DBA system. The core materials released from fractured MCs could bond the fracture surfaces of the BMI/DBA matrix through the polymerization of epoxy resins. When the healing temperature schedule of 100°C/2h+150°C/1h was applied, 15 wt% MCs recovered 98% of the virgin fracture toughness of BMI/DBA. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparative qualitative analysis of nonylphenol isomers by gas chromatography-mass spectrometry combined with chemometric resolution

The relationship between nonylphenol (NP) isomers' structures and their estrogenic potencies has been evaluated previously. However, due to their similarities in both chemical and physical properties, complete separation and identification remain strikingly difficult. In the present study, gas chromatography-mass spectrometry (GC-MS) is employed to separate commercial NP isomers. Both extracted ion chromatograms (EIC) based on selected ions known to be definitive for the suite of isomers, and the heuristic evolving latent projection (HELP) chemometric resolution method have been applied for the analysis and identification of the NP isomers. This method corrected the wrong identification of one isomer which was suspected based on the EIC data, and also was able to be applied for the determination of an additional isomer with low abundance. Overall, 15 NP isomers have been proposed by the HELP interpretation method. Pure component chromatograms and mass spectra have been extracted with the aid of chemometric resolution. The applicability of the commercial deconvolution software package automated mass spectral deconvolution and identification system (AMDIS) has also been tested against the HELP method for comparative presentation of pure component mass spectra.     

Travelling‐wave ion mobility and negative ion fragmentation of high‐mannose N‐glycans

The isomeric structure of high‐mannose N‐glycans can significantly impact biological recognition events. Here, the utility of travelling‐wave ion mobility mass spectrometry for isomer separation of high‐mannose N‐glycans is investigated. Negative ion fragmentation using collision‐induced dissociation gave more informative spectra than positive ion spectra with mass‐different fragment ions characterizing many of the isomers. Isomer separation by ion mobility in both ionization modes was generally limited, with the arrival time distributions (ATD) often showing little sign of isomers. However, isomers could be partially resolved by plotting extracted fragment ATDs of the diagnostic fragment ions from the negative ion spectra, and the fragmentation spectra of the isomers could be extracted by using ions from limited areas of the ATD peak. In some cases, asymmetric ATDs were observed, but no isomers could be detected by fragmentation. In these cases, it was assumed that conformers or anomers were being separated. Collision cross sections of the isomers in positive and negative fragmentation mode were estimated from travelling‐wave ion mobility mass spectrometry data using dextran glycans as calibrant. More complete collision cross section data were achieved in negative ion mode by utilizing the diagnostic fragment ions. Examples of isomer separations are shown for N‐glycans released from the well‐characterized glycoproteins chicken ovalbumin, porcine thyroglobulin and gp120 from the human immunodeficiency virus. In addition to the cross‐sectional data, details of the negative ion collision‐induced dissociation spectra of all resolved isomers are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Liquid chromatographic determination of microcystins in water samples following pre-column excimer fluorescence derivatization with 4-(1-pyrene)butanoic acid hydrazide

A method to measure the concentrations of microcystins (MCs) in water samples has been developed by incorporating pre-column fluorescence derivatization and liquid chromatography (LC). A solid-phase extraction for pretreatment was used to extract the MCs in water samples. The MCs were derivatized with excimer-forming 4-(1-pyrene)butanoic acid hydrazide (PBH). The MCs could then be detected by fluorescence after separation with a pentafluorophenyl (PFP)-modified superficially porous (core shell) particle LC column. The derivatization reactions of MCs with PBH proceeded easily in the presence of 4,6-dimethoxy-1,3,5-triazin-2-yl-4-methylmorpholinium (DMT-MM) as a condensation reagent, and the resulting derivatives could be easily separated on the PFP column. The derivatives were selectively detected at excimer fluorescence wavelengths (440–540 nm). The instrument detection limit and the instrument quantification limit of the MCs standards were 0.4–1.2 μg L⁻¹ and 1.4–3.9 μg L⁻¹, respectively. The method was validated at 0.1 and 1.0 μg L⁻¹ levels in tap and pond water samples, and the recovery of MCs was between 67 and 101% with a relative standard deviation of 11%. The proposed method can be used to quantify trace amounts of MCs in water samples.