Disinfection of drinking water contaminated with Cryptosporidium parvum oocysts under natural sunlight and using the photocatalyst TiO2

The results of a batch-process solar disinfection (SODIS) and solar photocatalytic disinfection (SPCDIS) on drinking water contaminated with Cryptosporidium are reported. Cryptosporidium parvum oocyst suspensions were exposed to natural sunlight in Southern Spain and the oocyst viability was evaluated using two vital dyes [4',6-diamidino-2-phenylindole (DAPI) and propidium iodide (PI)]. SODIS exposures (strong sunlight) of 8 and 12h reduced oocyst viability from 98% (+/-1.3%) to 11.7% (+/-0.9%) and 0.3% (+/-0.33%), respectively. SODIS reactors fitted with flexible plastic inserts coated with TiO2 powder (SPCDIS) were found to be more effective than those which were not. After 8 and 16 h of overcast and cloudy solar irradiance conditions, SPCDIS reduced oocyst viability from 98.3% (+/-0.3%) to 37.7% (+/-2.6%) and 11.7% (+/-0.7%), respectively, versus to that achieved using SODIS of 81.3% (+/-1.6%) and 36.0% (+/-1.0%), respectively. These results confirm that solar disinfection of drinking water can be an effective household intervention against Cryptosporidium contamination.     

Effects of Arrangement of UV Light‐Emitting Diodes on the Inactivation Efficiency of Microorganisms in Water

Ultraviolet light‐emitting diodes (UV‐LEDs) offer high flexibility in the reactor design for water disinfection. To specify the key design factors affecting the performance of a reactor, we examined how the arrangement of UV‐LEDs in a cylindrical reactor affects the inactivation efficiency of Escherichia coli and coliphage Qβ. A ring‐shaped UV‐LED apparatus, composed of two units containing ten 285‐nm UV‐LEDs each, were attached to a quartz cylinder, and microbial suspensions flowed through the cylinder for single pass at altered flow rates. The distance between the two units, L, was altered to examine its effects on inactivation efficiencies. Over 4 log inactivation of E. coli was achieved at 800 mL min^?1 regardless of the L values, suggesting that the apparatus has a high potential to disinfect water. The inactivation at L = 20 mm was significantly higher than that at L = 0 in all cases tested (ANOVA, P < 0.05), while this was not true when L was extended to 40 and 60 mm. Therefore, a separate arrangement of UV‐LEDs at a certain distance can improve the efficiency, and the distance matters to enhance the performance. This study involves a design concept on how to arrange UV‐LEDs in a water disinfection apparatus.     

Comparative Antibacterial Efficacy of Photodynamic Therapy and Ultrasonic Irrigation Against Enterococcus faecalis In Vitro

Enterococcus faecalis poses a challenge to the efficacy of traditional root canal disinfection methods. This study was aimed to establish a synergistic root canal disinfection strategy combining ultrasonic irrigation with photodynamic therapy (PDT) together and to test its antibacterial efficacy against E. faecalis. Twenty‐seven bovine root canals infected with E. faecalis were randomly divided into three groups and treated with different disinfection methods as follows: ultrasonic irrigation with 2.5% NaOCl, methylene blue (MB)‐mediated PDT, or combined ultrasonic irrigation and PDT as described above. Quantification of E. faecalis was performed on the root canals before and immediately after the disinfection treatment. Residual bacteria were determined by counting colony‐forming units. Samples were randomly selected from the three groups, and the morphology of residual bacteria inside the dentinal tubules was studied by scanning electron microscopy. The number of surviving E. faecalis in the group treated with the combination method was significantly lower (P < 0.05) than those in the ultrasonic irrigation‐treated or PDT‐treated groups. Similar results were found in the morphological studies of the three groups. The results of our study highlighted the importance of combination of ultrasonic irrigation and PDT to produce significant antibacterial efficacy against E. faecalis during root canal disinfection.     

Solar Water Disinfection to Produce Safe Drinking Water: A Review of Parameters,Enhancements, and Modelling Approaches to Make SODIS Faster and Safer

Solar water disinfection (SODIS) is one the cheapest and most suitable treatments to produce safe drinking water at the household level in resource-poor settings. This review introduces the main parameters that influence the SODIS process and how new enhancements and modelling approaches can overcome some of the current drawbacks that limit its widespread adoption. Increasing the container volume can decrease the recontamination risk caused by handling several 2 L bottles. Using container materials other than polyethylene terephthalate (PET) significantly increases the efficiency of inactivation of viruses and protozoa. In addition, an overestimation of the solar exposure time is usually recommended since the process success is often influenced by many factors beyond the control of the SODIS-user. The development of accurate kinetic models is crucial for ensuring the production of safe drinking water. This work attempts to review the relevant knowledge about the impact of the SODIS variables and the techniques used to develop kinetic models described in the literature. In addition to the type and concentration of pathogens in the untreated water, an ideal kinetic model should consider all critical factors affecting the efficiency of the process, such as intensity, spectral distribution of the solar radiation, container-wall transmission spectra, ageing of the SODIS reactor material, and chemical composition of the water, since the substances in the water can play a critical role as radiation attenuators and/or sensitisers triggering the inactivation process.     

Oligolysine‐Conjugated Zinc(II) Phthalocyanines as Efficient Photosensitizers for Antimicrobial Photodynamic Therapy

A series of zinc(II) phthalocyanines conjugated with an oligolysine chain (n=2, 4, and 8) were synthesized and characterized by using various spectroscopic methods. As shown by using UV/Vis and fluorescence spectroscopic methods, these compounds were nonaggregated in N,N‐dimethylformamide, and gave a weak fluorescence emission and high singlet oxygen quantum yield (Φ_Δ=0.86–0.89) as a result of their di‐α‐substitution. They became slightly aggregated in water with 0.05 % Cremophor EL, but they could still generate singlet oxygen effectively. The antimicrobial photodynamic activities of these compounds were then examined against various bacterial strains, including the Gram‐positive methicillin‐sensitive Staphylococcus aureus ATCC 25923 and methicillin‐resistant Staphylococcus aureus ATCC BAA‐43, and the Gram‐negative Escherichia coli ATCC 35218 and Pseudomonas aeruginosa ATCC 27853. Generally, the dyes were much more potent toward the Gram‐positive bacteria. Only 15 to 90 nM of these photosensitizers was required to induce a 4 log reduction in the cell viability of the strains. For Escherichia coli, the photocytotoxicity increased with the length of the oligolysine chain. The octalysine derivative showed the highest potency with a 4 log reduction concentration of 0.8 μM . Pseudomonas aeruginosa was most resistant to the photodynamic treatment. The potency of the tetralysine derivative toward a series of clinical strains of Staphylococcus aureus was also examined and found to be comparable with that toward the nonclinical counterparts. Moreover, the efficacy of these compounds in photodynamic inactivation of viruses was also examined. They were highly photocytotoxic against the enveloped viruses influenza A virus (H1N1) and herpes simplex virus type 1 (HSV1), but exhibited no significant cytotoxicity against the nonenveloped viruses adenovirus type 3 (Ad3) or coxsackievirus (Cox B1). The octalysine derivative also showed the highest potency with an IC₅₀ value of 0.05 nM for the two enveloped viruses.     

Oxidative Rearrangement of Isatins with Arylamines Using H2O2 as Oxidant: A Facile Synthesis of Quinazoline‐2,4‐diones and Evaluation of Their Antibacterial Activity

A green and highly efficient synthetic method for the synthesis of quinazoline‐2,4‐diones with hydrogen peroxide as the terminal oxidant has been developed. The reaction features the mild reaction conditions, broad substrate scope, metal‐free catalysts, and sole byproduct water. A plausible mechanism for this process was proposed. Moreover, an antibacterial activity study was performed to evaluate the antimicrobial activities towards two Gram‐negative bacterial strains (Escherichia coli , and Klebsiella pneumonia ) and two Gram‐positive bacterial strains (Staphylococcus epidermidis , and Staphylococcus aureus ) using the Broth microdilution method.     

Synthesis and Antibacterial Activity of 3‐(Substituted arylmethyl)‐4‐acylaminomethyloxazolidin‐2‐ones and Derivatization to Symmetrical Twin‐Drug Type Molecules

In connection with our studies on antibacterial active compounds in the class of new oxazolidinones against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Escherichia coli) strains, some molecular modifications were attempted. In this study, molecular modifications of 4‐aminomethyloxazolidin‐2‐ones ( 3a ) to the corresponding 4‐acylaminomethyloxazolidin‐2‐one derivatives ( 3c–d ) and preparations of the represented twin‐drug type molecules ( 10–14 ) were investigated. Some additional 4‐dialkylaminomethyloxazolidin‐2‐ones ( 2 ) were also synthesized. The synthesized compounds were evaluated for antibacterial activity with Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains.     

Effectiveness of the Photoactive Dye Methylene Blue versus Caspofungin on the Candida parapsilosis Biofilm in vitro and ex vivo

This research studied the effectiveness of the photoactive compound methylene blue (MB) activated with red LED light (576–672 nm) compared to that of caspofungin (CAS) on 1 Candida albicans and 3 Candida parapsilosis strains. Results were evaluated in terms of SMIC₅₀ for CAS or in PDI (photodynamic inactivation)‐SMIC₅₀ for MB (minimal inhibitory concentration inhibiting sessile biofilm to 50% in comparison to the control without CAS or after irradiation in comparison to the control without MB). While all strains were susceptible to CAS in planktonic form, the SMIC₅₀ was determined to be >16 μg mL^?1 when CAS was added to a 24 h biofilm. However, PDI‐MIC_50s (1.67 mW cm^?2, fluence 15 J cm^?2) were 0.0075–0.03 mmol L^?1. For biofilm, PDI‐SMIC_50s were in the range from 0.7 to 1.35 mmol L^?1. MB concentration of 1 mmol L^?1 prevented a biofilm being formed ex vivo on mouse tongues after irradiation regardless of the application time, in contrast to CAS, which was only effective at a concentration of 16 μg mL^?1 when it was added at the beginning of biofilm formation. PDI seems to be a promising method for the prevention of microbial biofilms that do not respond significantly to conventional drugs.     

Hydrogen Peroxide Enhances the Antibacterial Effect of Methylene Blue‐based Photodynamic Therapy on Biofilm‐forming Bacteria

Recently, increased attention has been focused on endoscopic disinfection after outbreaks of drug‐resistant infections associated with gastrointestinal endoscopy. The aims of this study were to investigate the bactericidal efficacy of methylene blue (MB)‐based photodynamic therapy (PDT) on Pseudomonas aeruginosa (P. aeruginosa), which is the major cause of drug‐resistant postendoscopy outbreak, and to assess the synergistic effects of hydrogen peroxide addition to MB‐based PDT on biofilms. In planktonic state of P. aeruginosa, the maximum decrease was 3 log₁₀ and 5.5 log₁₀ at 20 and 30 J cm^?2, respectively, following MB‐based PDT. However, the maximum reduction of colony forming unit (CFU) was decreased by 2.5 log₁₀ and 3 log₁₀ irradiation on biofilms. The biofilm formation was significantly inhibited upon irradiation with MB‐based PDT. When the biofilm state of P. aeruginosa was treated with MB‐based PDT with hydrogen peroxide, the CFU was significantly decreased by 6 log₁₀ after 20 J cm^?2, by 7 log₁₀ after 30 J cm^?2 irradiation, suggesting significantly higher efficacy than MB‐based PDT alone. The implementation of the combination of hydrogen peroxide with MB‐based PDT through working channels might be appropriate for preventing early colonization and biofilm formation in the endoscope and postendoscopy outbreak.     

A Polymer/Peptide Complex‐Based Sensor Array That Discriminates Bacteria in Urine

A negatively charged poly(para ‐phenyleneethynylene) (PPE) forms electrostatic complexes with four positively charged antimicrobial peptides (AMP). The AMPs partially quench the fluorescence of the PPE and discriminate fourteen different bacteria in water and in human urine by pattern‐based fluorescence recognition; the AMP‐PPE complexes bind differentially to the components of bacterial surfaces. The bacterial species and strains form clusters according to staining properties (Gram‐positive and Gram‐negative) or genetic similarity (genus, species, and strain). The identification and data treatment is performed by pattern evaluation with linear discriminant analysis (LDA) of the collected fluorescence intensity data.     

Multiplex identification of drug‐resistant Gram‐positive pathogens using stuffer‐free MLPA system

Early detection of pathogens from blood and identification of their drug resistance are essential for sepsis management. However, conventional culture‐based methods require relatively longer time to identify drug‐resistant pathogens, which delays therapeutic decisions. For precise multiplex detection of drug‐resistant Gram‐positive pathogens, we developed a method by using stuffer‐free multiplex ligation‐dependent probe amplification (MLPA) coupled with high‐resolution CE single‐strand conformation polymorphisms (CE‐SSCP) system. We designed three probe sets for genes specific to Gram‐positive species (Staphylococcus aureus: nuc, Enterococcus faecium: sodA, and Streptococcus pneumoniae: lytA) and two sets for genes associated with drug resistance (mecA and vanA) to discriminate major Gram‐positive pathogens with the resistance. A total of 94 different strains (34 reference strains and 60 clinical isolates) were used to validate this method and strain‐specific peaks were successfully observed for all the strains. To improve sensitivity of the method, a target‐specific preamplification step was introduced and, consequently, the sensitivity increased from 10 pg to 100 fg. We also reduced a total assay time to 8 h by optimizing hybridization time without compromising test sensitivity. Taken together, our multiplex detection system can improve detection of drug‐resistant Gram‐positive pathogens from sepsis patients’ blood.     

Synthesis of Dibenzothiazolyldibenzo‐18‐Crown‐6 and its Applications in Colorimetric Recognition of Palladium and as Antimicrobial Agent

Dibenzothiazolyldibenzo‐18‐crown‐6‐ether was designed and synthesized by formylation of dibenzo‐18‐crown‐6‐ether followed by condensation with 2‐aminothiophenol. A simple and rapid UV‐Visible spectrophotometric method is developed for detection of trace of palladium ions. Furthermore it was assessed for antimicrobial activity against bacterial strains Staphylococcus aureus (Gram+ve), Escherichia coli (Gram−ve) as well as fungal strains Aspergillus niger and Candida albicans respectively.     

Synthesis and Antimicrobial Evaluation of Some New 4,5′‐Bisthiazoles

Thiazole and bisthiazole derivatives represent a prevalent scaffold in the antimicrobial drug discovery. Therefore, we have decided to synthesize some new series of 4,5′‐bisthiazoles. A total of 17 compounds were synthesized, their structural elucidation being based on elemental analysis (C,H,N,S) and spectroscopic data (MS and ¹H NMR). Their in vitro antimicrobial activities were assessed against several Gram‐positive and Gram‐negative bacteria strains and also against one fungal strain (Candida albicans) using the difusimetric method. Some of the compounds showed modest to good antibacterial activity against Gram‐negative Escherichia coli and Salmonella typhimurium and Gram‐positive Staphylococcus aureus and Bacillus cereus bacterial strains. All of the synthesized compounds showed moderate to very good antifungal activity against C. albicans.     

Synthesis of Novel Fused Thiazolo[3,2‐a]pyrimidin‐3‐ols and Evaluation for their Antibacterial Activity

A series of novel fused thiazolo[3,2‐a]pyrimidin‐3‐ol derivatives have been synthesized by reaction of fused pyrimidine‐thiones with 4‐substituted phenacyl bromide/3(2‐bromoacetyl)coumarin in refluxing acetic acid with good yields. All the synthesized compounds were confirmed by spectral studies and screened for their in vitro antibacterial activity against Staphylococcus aureus, Bacillus thuringiensis (Gram positive), Escherichia coli, and Klebsiella pneumoniae (Gram negative) bacterial strains. Activity results revealed that all the compounds were weak to good active against the tested bacterial strains on comparing with the standard drug gentamicin.     

Convenient Synthesis and Biological Activity of Mono and Diacyl 2,5‐Dimercapto‐1,3,4‐thiadiazole Derivatives

New derivatives of 2,5‐dimercapto‐1,3,4‐thiadiazole substituted both at one or two exocyclic sulfur atoms with a series of aroyl or ethoxycarbonyl groups were synthesized in reactions of 2,5‐dimercapto‐1,3,4‐thiadiazole salts with appropriate acid chlorides or ethyl chloroformate in mild conditions. The products were characterized by spectroscopy (¹H NMR, ¹³C NMR, IR, and HRMS). Some from the synthesized compounds were screened in vitro and in vivo for antibacterial and antifungal activities against a panel of reference strains of microorganisms. The study revealed that ethyl S‐(5‐mercapto‐1,3,4‐thiadiazol‐2‐yl) carbonothioate seems to be the most active and versatile compound against Gram‐positive bacteria, Gram‐negative bacteria, and plant pathogenic fungi.     

An Efficient Synthesis and Antibacterial Activity of Pyrido[2,3‐d]Pyrimidine,Chromeno[3,4‐c]Pyridine,Pyridine, Pyrimido[2,3‐c]Pyridazine,Enediamines, and Pyridazine Derivatives

A series of Pyrido[2,3‐d]pyrimidine have been synthesized through a reaction of cyanoacetylurea derivatives with aromatic aldehydes or Arylidines. Reaction of compound 1 with aromatic arylidine derivatives or arylhydrazones gave Chromeno[3,4‐c]pyridine, Pyridine, Pyrimido[2,3‐c]pyridazine, Enediamines, and Pyridazine derivatives. All the synthesized compounds were confirmed by spectral studies and screened for their in antibacterial activity against Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative) bacterial strains. All the compounds were weak to good active against the tested bacterial strains on comparing with the standard drug gentamicin.     

Synthesis and Antimicrobial Activity of Some New N‐substituted‐5‐arylidene‐thiazolidine‐2,4‐diones

A total of 17 new N‐substituted derivatives ( 2b , 2c , 2d , 2e , 2f , 2g , 2h , 2i , 2j , 2k and 3b , 3c , 3d , 3e , 3f , 3g , 3h ) of 5‐((2‐phenylthiazol‐4‐yl)methylene) thiazolidine‐2,4‐dione ( 2a ) and 5‐(2,6‐dichloro‐ benzylidene)thiazolidine‐2,4‐dione ( 3a ) were synthesized. The structural elucidation of the newly synthesized compounds was based on elemental analysis and spectroscopic data (MS, ¹H NMR, ¹³C NMR), and their antimicrobial activities were assessed in vitro against several strains of Gram‐positive and Gram‐negative bacteria and one fungal strain (Candida albicans) as growth inhibition diameter. Some of them showed modest to good antibacterial activity against Gram‐negative Escherichia coli and Salmonella typhimurium and Gram‐positive Staphylococcus aureus, Bacillus cereus, and Enterococcus fecalis bacterial strains, whereas almost all the compounds were inactive against Listeria monocytogenes. All of the synthesized compounds showed moderate to very good activity against C. albicans.     

Synthesis and Antimicrobial Evaluation of Novel Dibenzo‐18‐Crown‐6‐Ether Functionalized Pyrimidines

A practical, two‐step synthesis of crown ether functionalized pyrimidines has been developed. The reaction conditions have been optimized, and the protocol is generalized for series of substrates. These newly synthesized compounds exhibited antimicrobial activity against bacterial strains Staphylcoccus aureus (Gram‐positive) and Escherichia coli (Gram‐negative). These compounds were also found to be potent antifungal agents Aspergillus niger and Candida albicans strains, respectively.     

Synthesis and Antimicrobial Evaluations of Some Novel Mono‐, Bis‐, and Tris‐Nitro‐1,2,4‐Triazines

Substituted‐1,2,4‐triazines were conveniently synthesized in one pot by the cyclization of arylnitroformaldehyde hydrazone derivatives 1 and 5 with different primary amines in ~37% formaldehyde solution. The synthesized compounds were arranged into novel mono‐, bis‐, and tris‐nitro‐1,2,4‐triazine derivatives 2 , 3 , 4 , 6 , and 7 . The antibacterial and antifungal activity of the synthesized compounds were screened against bacterial strains Escherichia coli (as Gram − ve) and Staphylococcus aureus (as Gram + ve), and fungal strains Aspergillus flavus and Candida albicans . All the synthesized compounds exhibit various patterns of inhibitory activity on the two pathogenic bacterial strains. However, the same compounds showed no activity against the tested fungal strains.     

Di‐N‐Methylation of Anti‐Gram‐Positive Aminoglycoside‐Derived Membrane Disruptors Improves Antimicrobial Potency and Broadens Spectrum to Gram‐Negative Bacteria

The effect of di‐N‐methylation of bacterial membrane disruptors derived from aminoglycosides (AGs) on antimicrobial activity is reported. Di‐N‐methylation of cationic amphiphiles derived from several diversely structured AGs resulted in a significant increase in hydrophobicity compared to the parent compounds that improved their interactions with membrane lipids. The modification led to an enhancement in antibacterial activity and a broader antimicrobial spectrum. While the parent compounds were either modestly active or inactive against Gram‐negative pathogens, the corresponding di‐N‐methylated compounds were potent against the tested Gram‐negative as well as Gram‐positive bacterial strains. The reported modification offers a robust strategy for the development of broad‐spectrum membrane‐disrupting antibiotics for topical use.