Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Design of Silica‐Oligourethane‐Collagen Membranes for Inflammatory Response Modulation: Characterization and Polarization of a Macrophage Cell Line

The polarization of macrophages M0 to M1 or M2 using molecules embedded in matrices and hydrogels is an active field of study. The design of biomaterials capable of promoting polarization has become a paramount need nowadays, since in the healing process macrophages M1 and M2 modulate the inflammatory response. In this work, several immunocytochemistry and ELISA tests strongly suggest the achievement of polarization using collagen‐based membranes crosslinked with tri‐functionalized oligourethanes and coated with silica. Measuring the amount of TGF‐β1 secreted to culture media by macrophages growth on these materials, and quantifying the macrophage morphology, it is proved that it is possible to stimulate the anti‐inflammatory pathway toward M2, having measurements with p ≤ 0.05 of statistical significance between the control and the collagen‐based membranes. Furthermore, some physicochemical characteristics of the hybrid materials are tested envisaging future applications: collagenase degradation resistance, water uptake, collagen fiber diameter, and deformation resistance are increased for all the crosslinked biomaterials. It is considered that the biological and physicochemical properties make the material suitable for the modulation of the inflammatory response in the chronic wounds and promising for in vivo studies.     

A Simple NMR‐Based Method for Studying the Spatial Distribution of Linkers within Mixed‐Linker Metal–Organic Frameworks

The spatial distribution of different linkers within mixed‐linker metal–organic frameworks crucially influences the properties of such materials. A simple and robust approach based on ¹H spin‐diffusion magic‐angle‐spinning nuclear magnetic resonance measurements and modeling of spin‐diffusion curves is presented; this approach facilitates the distinction between homogeneous and clustered distributions. The performance of the approach is demonstrated with an example of an aluminum‐based metal–organic material DUT‐5, which has framework consisting of biphenyl and bipyridyl dicarboxylic linkers. The distribution is shown to be homogeneous in this material. The approach could be applied to studying other spatially disordered crystalline materials.     

从天然动物丝到丝蛋白基材料的研究

作为具有优异综合力学性能的天然蛋白质纤维,丰产的动物丝特别是蚕丝长期伴随着人们的日常生活,近十余年来,各种具有特色的功能性丝蛋白基材料更是层出不穷.但在探索动物丝和丝蛋白基材料的过程中,动物丝纤维是经由蚕或蜘蛛等动物的纺器而纺制得到的简单事实往往被忽视;换言之,动物丝实际上是动物对丝蛋白进行体内“加工”后的产物,也是丝蛋白基材料中的一种.因此,天然动物丝中独特的各等级间构效关系与丝蛋白基材料的构效关系之间并不存在着必然的传承效应.本文着重介绍了我们在对动物丝和丝蛋白基材料探索中的经验和体会,即在强调以丝蛋白分子链结构与性能及其之间的关系为研究重点的基础上,从比较和发掘各种天然动物丝的特性入手,进而了解丝蛋白分子链在本体和溶液中的行为,并通过对动物丝蛋白分子链聚集态结构的调控,以达到设计制备一系列多形貌和多功能的动物丝蛋白基材料的目的.     

Basic Principles in the Design of Spider Silk Fibers

The prominence of spider silk as a hallmark in biomimetics relies not only on its unrivalled mechanical properties, but also on how these properties are the result of a set of original design principles. In this sense, the study of spider silk summarizes most of the main topics relevant to the field and, consequently, offers a nice example on how these topics could be considered in other biomimetic systems. This review is intended to present a selection of some of the essential design principles that underlie the singular microstructure of major ampullate gland silk, as well as to show how the interplay between them leads to the outstanding tensile behavior of spider silk. Following this rationale, the mechanical behavior of the material is analyzed in detail and connected with its main microstructural features, specifically with those derived from the semicrystalline organization of the fibers. Establishing the relationship between mechanical properties and microstructure in spider silk not only offers a vivid image of the paths explored by nature in the search for high performance materials, but is also a valuable guide for the development of new artificial fibers inspired in their natural counterparts.     

Silk‐Ion Jelly: a novel ion conducting polymeric material with high conductivity and excellent mechanical stability

In this work, a thin, flexible and mechanically stable polymer conducting material (Silk‐Ion Jelly) was developed though application of Ion Jelly on to silk fabrics. Ion Jelly was prepared through jellification of a room temperature ionic liquid, 1‐butyl‐3‐methyl‐imidazolium dicyanamide ([bmim][dca]) using gelatin and water and applied to silk fabrics using two different processes: impregnation and in‐situ. Various parameters influencing ionic conductivity such as Ion Jelly composition (ratio of [bmim][dca], water and gelatin) and incorporation as well as the type of application process were thoroughly investigated. It was observed that the Ion Jelly compositions containing lower gelatin and water ratio as well as application through in‐situ process at high temperature (200 °C) led to considerable improvement in conductivity, mainly due to increased [bmim][dca] concentration, structural flexibility and reduced silk crystallinity. Silk‐Ion Jelly prepared using optimized conditions showed excellent mechanical stability and possessed high room temperature conductivity (2.9 × 10^?3 S. cm^?1), similar to [bmim][dca], and therefore, this novel ion conducting material may find potential applications in electrochemical devices due to its eco‐friendly preparation route using biomaterials and green solvents. Copyright © 2012 John Wiley & Sons, Ltd.     

Renewable epoxidized cardanol‐based acrylate as a reactive diluent for UV‐curable resins

A novel kind of biobased monomer, epoxidized cardanol‐based acrylate (ECA), was successfully synthesized from cardanol via acrylation and epoxidization. The chemical structure was confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. Then, the ECA was employed to produce UV‐curable films and coatings copolymerized with castor oil‐based polyurethane acrylate. Compared to coatings from petroleum‐based diluent hydroxyethyl acrylate‐based castor oil‐based polyurethane acrylate resins, ECA‐based biomaterials exhibited a little inferior dilution ability but overcome the drawback of high volumetric shrinkage with a special lower value. Moreover, ultimate properties of the UV‐cured biomaterials such as thermal, mechanical, coating, swelling, and hydrophobic properties were investigated. The UV‐curing behavior was investigated using real‐time IR, and the overall double bond conversion was more than 90%. This biobased UV‐curable cardanol‐based diluent shows a promise in “green + green” materials technologies.     

Biophotonics of Native Silk Fibrils

Native silk fibroin (NSF) is a unique biomaterial with extraordinary mechanical and biochemical properties. These key characteristics are directly associated with the physical transformation of unstructured, soluble NSF into highly organized nano‐ and microscale fibrils rich in β‐sheet content. Here, it is shown that this NSF fibrillation process is accompanied by the development of intrinsic fluorescence in the visible range, upon near‐UV excitation, a phenomenon that has not been investigated in detail to date. Here, the optical and fluorescence characteristics of NSF fibrils are probed and a route for potential applications in the field of self‐assembled optically active biomaterials and systems is explored. In particular, it is demonstrated that NSF can be structured into autofluorescent microcapsules with a controllable level of β‐sheet content and fluorescence properties. Furthermore, a facile and efficient fabrication route that permits arbitrary patterns of NSF microcapsules to be deposited on substrates under ambient conditions is shown. The resulting fluorescent NSF patterns display a high level of photostability. These results demonstrate the potential of using native silk as a new class of biocompatible photonic material.     

Functional Organic Semiconductors Based on Bay‐Annulated Indigo (BAI)

The advancement of organic electronics has been continually pushed by the need for stable and high performance acceptor materials. By utilizing inexpensive and stable indigo dye as a starting material, Bay‐Annulated Indigo (BAI) provides a new motif for the development of semiconducting materials. Modular and straightforward synthesis makes BAI an outstanding platform for molecular design, while excellent stability, strong absorption, and high ambipolar mobility render BAI‐based materials excellent candidates for organic electronics. BAI‐based polymers and small molecules have taken advantage of these properties to show promising results in a variety of applications.     

Dual-functional composite with anticoagulant and antibacterial properties based on heparinized silk fibroin and chitosan

Heparinized biomaterials exhibit great anticoagulant properties. However, they promote proliferation of Staphylococcus aureus (S. aureus) and therefore cause infection within the bloodstream upon implantation in vivo. In the present study, an interesting dual-functional composite with anticoagulant and antibacterial properties based on heparinized silk fibroin and chitosan was synthesized. First, heparin was grafted onto the silk fibroin by covalent immobilization with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS). All data gathered from Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and elemental analysis (EA) indicated that the heparin was successfully immobilized onto the silk fibroin. The dual-functional composite of heparinized silk fibroin and chitosan was then fabricated by a blending method. The anticoagulant activity of the heparinized materials was evaluated using the prothrombin time (PT), activated partial thromboplastin time (APTT) and thrombin time (TT). The results showed that both heparinized silk fibroin and the composite material exhibited better hemocompatibility in comparison with single silk fibroin or chitosan. The antibacterial property of the materials was investigated by the pour-plate method. Results further suggested that the composite antibacterial property with respect to S. aureus was significantly enhanced. The dual-functionality of the composite material may supply a potential choice in blood contact devices.     

Chinese Oak Tasar Silkworm Antheraea pernyi Silk Proteins: Current Strategies and Future Perspectives for Biomedical Applications

Chinese nonmulberry temperate oak tasar/tussah, Antheraea pernyi (Ap) silk is a natural biopolymer that has attracted considerable attention as a biomaterial. The proteinaceous components of Ap silk proteins, namely fibroin and sericin may represent an alternative over mulberry Bombyx mori silk proteins. In fact, the silk fibroin (SF) of Ap is rich in Arginyl‐Glycyl‐Aspartic acid (RGD) peptides, which facilitate the adhesion and proliferation of various cell types. The possibility of processing Ap silk proteins into different distinct 2D‐ and 3D‐based matrices is described in earlier studies, such as membranes, nanofibers, scaffolds, and micro/nanoparticles, contributing to a different rate of degradation, mechanical properties, and biological performance useful for various biomedical applications. This review summarizes the current advances and developments on nonmulberry Chinese oak tasar silk protein (fibroin and sericin)‐based biomaterials and their potential uses in tissue engineering, regenerative medicine, and therapeutic delivery strategies.     

Biological Chitin–MOF Composites with Hierarchical Pore Systems for Air‐Filtration Applications

Metal–organic frameworks (MOFs) are promising materials for gas‐separation and air‐filtration applications. However, for these applications, MOF crystallites need to be incorporated in robust and manageable support materials. We used chitin‐based networks from a marine sponge as a non‐toxic, biodegradable, and low‐weight support material for MOF deposition. The structural properties of the material favor predominant nucleation of the MOF crystallites at the inside of the hollow fibers. This composite has a hierarchical pore system with surface areas up to 800 m² g⁻¹ and pore volumes of 3.6 cm³ g⁻¹, allowing good transport kinetics and a very high loading of the active material. Ammonia break‐through experiments highlight the accessibility of the MOF crystallites and the adsorption potential of the composite indicating their high potential for filtration applications for toxic industrial gases.     

Role of Skin Layers on Mechanical Properties and Supercontraction of Spider Dragline Silk Fiber

Spider dragline silk is a composite biopolymer that harbors extraordinary mechanical characteristics, and consists of a hierarchically arranged protein core surrounded by outer “skin” layers. However, the contribution of the successive fiber layers on material properties has not been well defined. Here, the influence of the different components on the physicochemical and mechanical properties of dragline is investigated. The crystal structure and the mechanical properties are not changed significantly after the removal of skin constituents, indicating that the core region of dragline silk fibers determines the structural and mechanical properties. Furthermore, the outer layers have little influence on supercontraction, suggesting they do not function as protection against the penetration of water molecules. On the other hand, the outer layers offer some protection against protease digestion. The present study provides insight into how the function and structure of silk fibers are modulated and facilitates the design of silk‐inspired functional materials.     

Cell‐Laden Hydrogels for Multikingdom 3D Printing

Living materials are created through the embedding of live, whole cells into a matrix that can house and sustain the viability of the encapsulated cells. Through the immobilization of these cells, their bioactivity can be harnessed for applications such as bioreactors for the production of high‐value chemicals. While the interest in living materials is growing, many existing materials lack robust structure and are difficult to pattern. Furthermore, many living materials employ only one type of microorganism, or microbial consortia with little control over the arrangement of the various cell types. In this work, a Pluronic F127‐based hydrogel system is characterized for the encapsulation of algae, yeast, and bacteria to create living materials. This hydrogel system is also demonstrated to be an excellent material for additive manufacturing in the form of direct write 3D‐printing to spatially arrange the cells within a single printed construct. These living materials allow for the development of incredibly complex, immobilized consortia, and the results detailed herein further enhance the understanding of how cells behave within living material matrices. The utilization of these materials allows for interesting applications of multikingdom microbial cultures in immobilized bioreactor or biosensing technologies.     

A Complete Multiscale Modelling Approach for Polymer–Clay Nanocomposites

We present an innovative, multiscale computational approach to probe the behaviour of polymer–clay nanocomposites (PCNs). Our modeling recipe is based on 1) quantum/force‐field‐based atomistic simulation to derive interaction energies among all system components; 2) mapping of these values onto mesoscopic bead–field (MBF) hybrid‐method parameters; 3) mesoscopic simulations to determine system density distributions and morphologies (i.e., intercalated versus exfoliated); and 4) simulations at finite‐element levels to calculate the relative macroscopic properties. The entire computational procedure has been applied to two well‐known PCN systems, namely Nylon 6/Cloisite 20A and Nylon 6/Cloisite 30B, as test materials, and their mechanical properties were predicted in excellent agreement with the available experimental data. Importantly, our methodology is a truly bottom‐up approach, and no “learning from experiment” was needed in any step of the entire procedure.     

Porous 3‐D scaffolds from regenerated Antheraea pernyi silk fibroin

In this study, porous three‐dimensional (3‐D) materials were prepared with the regenerated Antheraea pernyi (A. pernyi) silk fibroin by freeze‐drying from a lithium thiocyanate solution of its fibers. The relationship between preparation conditions and morphological structures of 3‐D materials was also studied. We concluded that with the decrease in A. pernyi silk fibroin solution concentration and the increase in the freezing temperature, the porosity and the average pore diameter of the 3‐D materials were increased while the pore density was decreased. By adjusting the freezing temperature and the silk fibroin solution concentration, the 3‐D materials having the average pore diameter of 75–260 µm and the porosity of 70–90% can efficiently be produced. As a kind of new material with excellent biocompatibility and bioactivity, the material is expected to be applied to tissue regeneration scaffolds. Copyright © 2007 John Wiley & Sons, Ltd.     

3D Printing of Silk Protein Structures by Aqueous Solvent‐Directed Molecular Assembly

Hierarchical molecular assembly is a fundamental strategy for manufacturing protein structures in nature. However, to translate this natural strategy into advanced digital manufacturing like three‐dimensional (3D) printing remains a technical challenge. This work presents a 3D printing technique with silk fibroin to address this challenge, by rationally designing an aqueous salt bath capable of directing the hierarchical assembly of the protein molecules. This technique, conducted under aqueous and ambient conditions, results in 3D proteinaceous architectures characterized by intrinsic biocompatibility/biodegradability and robust mechanical features. The versatility of this method is shown in a diversity of 3D shapes and a range of functional components integrated into the 3D prints. The manufacturing capability is exemplified by the single‐step construction of perfusable microfluidic chips which eliminates the use of supporting or sacrificial materials. The 3D shaping capability of the protein material can benefit a multitude of biomedical devices, from drug delivery to surgical implants to tissue scaffolds. This work also provides insights into the recapitulation of solvent‐directed hierarchical molecular assembly for artificial manufacturing.     

Additive manufacturing of fire‐retardant ethylene‐vinyl acetate

Thermocompression (with also extrusion and injection molding) is a classical polymer shaping manufacturing, but it does not easily allow designing sophisticated shapes without using a complex mold, on the contrary to 3D printing (or polymer additive manufacturing), which is a very flexible technique. Among all 3D printing techniques, fused deposition modeling is of high potential for product manufacturing, with the capability to compete with conventional polymer processing techniques. This is a quite low cost 3D printing technique, but the range of filaments commercially available is limited. However, in some specific 3D printing processes, no filaments are necessary. Polymers pellets feed directly the printing nozzle allowing to investigate many polymeric matrices with no commercial limitation. This is of high interest for the design of flame‐retarded materials, but literature is scarce in that field. In this paper, a comparison between thermocompression and 3D printing processes was performed on both neat ethylene‐vinyl acetate (EVA) copolymer and EVA flame retarded with aluminum triHydroxyde (ATH) containing different loadings (30 or 65 wt%) and with expandable graphite (EG), ie, EVA/ATH (30 wt%), EVA/ATH (65 wt%), and EVA/EG (10 wt%), respectively. Morphological comparisons, using microscopic and electronic microprobe analyses, revealed that 3D printed plates have lower apparent density and higher porosity than thermocompressed plate. The fire‐retardant properties of thermocompressed and 3D printed plates were then evaluated using mass loss calorimeter test at 50 kW/m². Results highlight that 3D printing can be used to produce flame‐retardant systems. This work is a pioneer study exploring the feasibility of using polymer additive manufacturing technology for designing efficient flame‐retarded materials.     

Catechol‐Functionalized Polyolefins

The incorporation of comonomers during ethylene polymerization can efficiently modulate important material properties of the polyolefins. Utilizing bioresourced comonomers for the generation of high‐performance polyolefin materials is attractive from a sustainability point of view. In this contribution, bioresourced eugenol and related comonomers were incorporated into polyolefins through palladium‐catalyzed copolymerization and terpolymerization reactions. Importantly, high‐molecular‐weight catechol‐functionalized polyolefins can be generated. The introduction of different metal ions induces efficient interactions with the incorporated catechol groups, leading to enhanced mechanical properties and self‐healing properties. Moreover, the catechol functionality can greatly improve other properties such as surface properties, adhesion properties, and compatibilizing properties. The catechol‐functionalized polyolefin was demonstrated as a versatile platform polymer for accessing various materials with dramatically different properties.