Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described. 相似文献
A multiphotochromic hybrid system is presented in which a light‐driven overcrowded alkene‐based molecular rotary motor is connected to a dithienylethene photoswitch. Ring closing of the dithienylethene moiety, using an irradiation wavelength different from the wavelength applied to operate the molecular motor, results in inhibition of the rotary motion as is demonstrated by detailed 1H‐NMR and UV/Vis experiments. For the first time, a light‐gated molecular motor is thus obtained. Furthermore, the excitation wavelength of the molecular motor is red‐shifted from the UV into the visible‐light region upon attachment of the dithienylethene switch. 相似文献
Azobenzenethiol molecules carrying different para‐substituents were used to form mixed monolayers with n‐alkanethiol molecules on Au and Ag surfaces. UV‐ and visible light irradiation of the surfaces resulted in reversible alternation of contact angle and characteristic infrared absorption peak intensities, as well as the work function of the metal surfaces. The alternations can be correlated with the cis‐trans isomerization of the azobenzene moieties at the surface. Electron transport from the metal electrode to a redox center in a contacting solution was measured and analyzed based on the change in the work function of the electrode as well as the monolayer film structure upon isomerization. 相似文献
A designed bis(dithienyl) dicyanoethene‐based, strictly E/Z photoswitch (4TCE) operates through state‐selective (E and Z isomer) photoactivation with visible light. The E and Z isomers of 4TCE exhibit remarkably different spectroscopic characteristics, including a large separation (70 nm) in their absorption maxima (λmax) and a 2.5‐fold increase in molar extinction coefficient from cis to trans. The energetically stable trans form can be completely converted to the cis form within minutes when exposed to white light, whereas the reverse isomerization occurs readily upon irradiation by blue light (λ<480 nm) or completely by thermal conversion at elevated temperatures. These features together with excellent thermal stability and photostability of both isomers make this new E/Z photoswitch a promising building block for photoswitchable materials that operate without the need for UV light. 相似文献
The ability to control the interplay of materials with low‐energy photons is important as visible light offers several appealing features compared to ultraviolet radiation (less damaging, more selective, predominant in the solar spectrum, possibility to increase the penetration depth). Two different metal–organic frameworks (MOFs) were synthesized from the same linker bearing all‐visible ortho‐fluoroazobenzene photoswitches as pendant groups. The MOFs exhibit different architectures that strongly influence the ability of the azobenzenes to isomerize inside the voids. The framework built with Al‐based nodes has congested 1D channels that preclude efficient isomerization. As a result, local light–heat conversion can be used to alter the CO2 adsorption capacity of the material on exposure to green light. The second framework, built with Zr nodes, provides enough room for the photoswitches to isomerize, which leads to a unique bistable photochromic MOF that readily responds to blue and green light. The superiority of green over UV irradiation was additionally demonstrated by reflectance spectroscopy and analysis of digested samples. This material offers promising perspectives for liquid‐phase applications such as light‐controlled catalysis and adsorptive separation. 相似文献
Heating and cooling can induce reversible solid‐to‐liquid transitions of matter. In contrast, athermal photochemical processes can induce reversible solid‐to‐liquid transitions of some newly developed azobenzene compounds. Azobenzene is photoswitchable. UV light induces trans‐to‐cis isomerization; visible light or heat induces cis‐to‐trans isomerization. Trans and cis isomers usually have different melting points (Tm) or glass transition temperatures (Tg). If Tm or Tg of an azobenzene compound in trans and cis forms are above and below room temperature, respectively, light may induce reversible solid‐to‐liquid transitions. In this Review, we introduce azobenzene compounds that exhibit photoinduced reversible solid‐to‐liquid transitions, discuss the mechanisms and design principles, and show their potential applications in healable coatings, adhesives, transfer printing, lithography, actuators, fuels, and gas separation. Finally, we discuss remaining challenges in this field. 相似文献
Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described. 相似文献
Azobenzenes are versatile photoswitches that can be cycled between their trans‐ and cis‐configuration with light. The wavelengths required for this isomerization are substantially shifted from the UV to the visible range through tetra‐ortho‐chlorination. These halogenated azobenzenes display unique photoswitching characteristics, but their syntheses remain limited and inefficient. A new general method for the synthesis of tetra‐ortho‐chloro azobenzenes has been developed, which relies on direct palladium(II)‐catalyzed C?H activation of pre‐existing standard azobenzenes. This late‐stage functionalization has a broad substrate scope and can be used to create a variety of useful building blocks for the construction of more elaborate redshifted photopharmaceuticals. This method is used to prepare red‐ AzCA‐4 , a photoswitchable vanilloid that enables optical control of the cation channel TRPV1 with visible light. 相似文献
New diarylethene derivatives containing benzoxazole ( NBO ) and benzothiazole ( NBT ) have been synthesized. Light‐induced trans–cis isomerization of NBO and NBT took place in crystals, and only induced the needle‐like crystals of NBO to bend backwards away from the UV light source. The movement of the atoms was deemed to take place during the isomerization of NBO ; hence, strain would be produced and accumulated rapidly in the surface of crystals exposed to UV light. The uniform release of strain led to the bending of needle‐like crystals. The light‐induced trans–cis isomerization efficiency of NBT was too low to drive the motion of crystals, which might have originated from the large repulsion between naphthyl and benzothiazole. These results provide a new platform for the transformation of light energy into mechanical energy in molecular crystals through the unimolecular photochemical reaction of diarylethene derivatives. 相似文献
Two‐NIR‐photon‐triggered Z→E isomerization of an azobenzene was accomplished by covalently linking a two‐photon‐harvesting triarylamine antenna to a thermally stable ortho‐fluorinated azobenzene derivative. The obtained photoswitch is fully addressable with visible and NIR light by using one‐photon and two‐photon excitation, respectively, with the latter offering enhanced penetration depth and improved spatial resolution. 相似文献
Visible‐light‐responsive reversible color‐switching systems are attractive to many applications because visible light has superior penetration and causes far less damage to organic molecules than UV. Herein, we report that self‐doping of SnO2−x nanocrystals with Sn2+ red‐shifts their absorption to the visible region and simultaneously produces oxygen vacancies, which can effectively scavenge photogenerated holes and thus enable the color switching of redox dyes using visible light. Wavelength‐selective switching can also be achieved by coupling the photocatalytic activity of the SnO2−x NCs with the color‐switching kinetics of different redox dyes. The fast light response enables the further fabrication of a solid film that can be repeatedly written on using a visible laser pen or projection printing through a photomask. This discovery represents a big step forward towards practical applications, especially in areas in which safety issues and photodamage by UV light are of concern. 相似文献
The properties of liquid‐crystalline (LC) hybrid systems made of inorganic nanoparticles grafted with photosensitive azo compounds are presented. For materials with a large density of azo ligands at the surface, the LC structure can be reversibly melted by UV light, and the return to the LC state does not require the absorption of visible light. For systems with a lower density of azo ligands, UV light causes shortening of the distance between metal sublayers in the lamellar phase. Interestingly, the azo derivatives attached to the nanoparticle surface show very different kinetics of cis/trans conformational change as compared to the free molecules. The cis form of free ligands in solution is stable for days, whereas the isomerization of molecules attached to the nanoparticle surface to the trans form takes only a few minutes. Apparently, owing to the crowded environment, azo ligands immobilized at a metal surface behave as they would in the condensed state. 相似文献
Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐pyridyazo)phenoxy] hexylmethacrylate} (PNIPAM‐b‐PAzPy) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In a water/tetrahydrofuran (H2O/THF) mixture, amphiphilic PNIPAM‐b‐PAzPy self‐assembles into giant micro‐vesicles. Upon alternate ultraviolet (UV) and visible light irradiation, obvious reversible swelling‐shrinking of the vesicles was observed directly under an optical microscope. The maximum percentage increase in volume, caused by the UV light, reached 17%. Moreover, the swelling could be adjusted using the UV light power density. The derivation of this effect is due to photoinduced reversible isomerization of azopyridine units in the vesicles.
We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and 1H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). 1H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>104 m ?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution. 相似文献
Novel photoresponsive linear, graft, and comb‐like copolymers with azobenzene chromophores in the main‐chain and/or side‐chain are prepared via a sequential ring‐opening metathesis polymerization (ROMP) and head‐to‐tail acyclic diene metathesis (ADMET) polymerization in a one‐pot procedure using Grubbs ruthenium‐based catalysts. The diluted solutions of these as‐prepared copolymers containing azobenzene chromophores exhibit photochemical trans–cis isomerization under the irradiation of UV light, followed by their cis–trans back‐isomerization in visible light. The rates of photoisomerization are found to be slower than those of back‐isomerization, and the rate for the comb‐like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side‐chain graft structure.
Cross‐linked liquid‐crystalline (LC) polymers with a mesomorphic diarylethene were prepared to demonstrate a versatile strategy for cross‐linked photochromic LC polymers as photomobile materials. Upon exposure to UV light to cause photocyclization of the diarylethene chromophore, the cross‐linked polymer films bend toward an actinic light source. By irradiation with visible light to cause a closed‐ring to open‐ring isomerization, the bent films revert to the initial flat state. Without visible‐light irradiation, the bent films remain bent even at 120 °C, indicating high thermal stability of the cross‐linked diarylethene LC polymers. 相似文献
Two typical molecular switches of spiropyran (SP) and benzoxazine (OX) were fused by sharing an indole to achieve a new dual‐addressable molecular switch (SP‐OX‐NO2). Through proper molecular modification with NO2, the transformation from merocyanine (MC) to ring‐closed SP or ring‐closed OX can be controlled separately with visible light or base stimuli in solution, respectively, and these processes are verified by UV‐vis and NMR spectroscopy as well as control experiments. The cis‐merocyanine (cis‐MC) form is involved in the basochromic process in solution. DFT calculation suggests that the bidirectional switching property of the fused SP‐OX molecular switch can be controlled separately, when the OX isomer is more stable than the deprotonated SP isomer. Because of the significant color variations in solution, the simple dual‐addressable switch has been further successfully applied to construct a multicolor reversible display on paper. 相似文献