New Linear and Star‐Shaped Thermogelling Poly([R]‐3‐hydroxybutyrate) Copolymers

The synthesis of multi‐arm poly([R]‐3‐hydroxybutyrate) (PHB)‐based triblock copolymers (poly([R]‐3‐hydroxybutyrate)‐b‐poly(N‐isopropylacrylamide)‐b‐[[poly(methyl ether methacrylate)‐g‐poly(ethylene glycol)]‐co‐[poly(methacrylate)‐g‐poly(propylene glycol)]], PHB‐b‐PNIPAAM‐b‐(PPEGMEMA‐co‐PPPGMA), and their subsequent self‐assembly into thermo‐responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi‐arm PHB macroinitiators. The composition of the resulting copolymers was investigated by ¹H and ¹³C J‐MOD NMR spectroscopy as well as size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self‐assemble into thermo‐responsive gels in aqueous solution. Rheological studies indicated that the linear one‐arm PHB‐based copolymer tend to form a micellar solution, whereas the two‐ and four‐arm PHB‐based copolymers afforded gels with enhanced mechanical properties and solid‐like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB‐based copolymer. All copolymers revealed a double thermo‐responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self‐assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non‐significant toxic response of the gels, as assessed by the cell viability of the CCD‐112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL^?1, suggest that these PHB‐based thermo‐responsive gels are promising candidate biomaterials for drug‐delivery applications.     

Poly(ethylene imine)s as Antimicrobial Agents with Selective Activity

We report the structure–activity relationship in the antimicrobial activity of linear and branched poly(ethylene imine)s (L‐ and B‐PEIs) with a range of molecular weights (MWs) (500–12 000). Both L‐ and B‐PEIs displayed enhanced activity against Staphylococcus aureus over Escherichia coli. Both B‐ and L‐PEIs did not cause any significant permeabilization of E. coli cytoplasmic membrane. L‐PEIs induced depolarization of S. aureus membrane although B‐PEIs did not. The low MW B‐PEIs caused little or no hemolysis while L‐PEIs are hemolytic. The low MW B‐PEIs are less cytotoxic to human HEp‐2 cells than other PEIs. However, they induced significant cell viability reduction after 24 h incubation. The results presented here highlight the interplay between polymer size and structure on activity.

     

Characteristic Interactions between Poly(hydroxybutyrate) Depolymerase and Poly[(R)‐3‐hydroxybutyrate] Film Studied by a Quartz Crystal Microbalance

Enzymatic degradation of poly[(R)‐3‐hydroxybutyrate] (P(3HB)) film by the poly(hydroxybutyrate) (PHB) depolymerase from Ralstonia picketti T1 was studied in 0.01 M phosphate buffer solution (pH 7.4) at 37 °C by using a quartz crystal microbalance (QCM) technique. Enzymatic degradation of P(3HB) film was quantitatively followed by QCM as a positive frequency shift. While, the amount of depolymerases adsorbed on the film could be evaluated as a negative frequency shift by using a mutant enzyme which had no hydrolytic activity in a catalytic site. The degradation rate increased with enzyme concentration to reach a maximum value at 1.0 μg · mL^?1, and then the rate decreased at higher enzyme concentration. This enzyme concentration dependence could be quantitatively explained in terms of a change of coverage of the film surface by the adsorbed enzyme. When the wild‐type enzyme solution in a QCM cell was replaced with the mutant enzyme solution in the middle of the reaction, the degradation rate was reduced markedly, indicating that the wild‐type enzyme adsorbed on the P(3HB) surface is easily substituted by the mutant enzyme in the solution. On the other hand, replacement of the wild‐type enzyme solution with other proteins or buffer solutions did not affect the degradation rate at all, suggesting that the adsorbed enzyme was not desorbed from the film surface. Thus, the adsorbed PHB depolymerase is released from the P(3HB) surface only by interaction with the same depolymerase in solution.

Time courses of frequency changes (ΔF) or weight changes (Δw) observed during enzymatic degradation of P(3HB) film by PHB depolymerase from R. picketti T1 at 37 °C.     

Synthesis and characterization of biodegradable triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] by atom transfer radical polymerization

Biodegradable poly(tert‐butyl acrylate)–poly[(R)‐3‐hydroxybutyrate]–poly (tert‐butyl acrylate) triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] (PHB) were synthesized by atom transfer radical polymerization. The chain architectures of the triblock copolymers were confirmed by ¹H NMR and ¹³C NMR spectra. Gel permeation chromatography analysis was used to estimate the molecular weight characteristics and lengths of the PHB and poly(tert‐butyl acrylate) blocks of the copolymers. The thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA showed that the triblock copolymers underwent stepwise thermal degradation and had better thermal stability than their respective homopolymers, whereas DSC analyses showed that a microphase‐separation structure was formed only in the triblock copolymers with the longer PHB block. As a similar result, from wide‐angle X‐ray diffraction experimentation, the crystalline phase of PHB could not be seen evidently in the triblock copolymers with the shorter PHB block. The enzymatic hydrolysis of the copolymer films was carried at 37 °C and pH 7.4 in a potassium phosphate buffer with an extracellular PHB depolymerase from Penicillum sp. The biodegradability of the triblock copolymers increased with an increase in the PHB block content. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4857–4869, 2005     

Effect of Extended π‐Conjugation Structure of Donor–Acceptor Conjugated Copolymers on the Photoelectronic Properties

New donor–acceptor conjugated copolymers based on alkylthienylbenzodithiophene (BDTT) and alkoxynaphthodithiophene (NDT) have been synthesized and compared with their benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based analogues to investigate the effect of the extended π conjugation of the polymer main chain on the physicochemical properties of the polymers. A systematic investigation into the optical properties, energy levels, field‐effect transistor characteristics, and photovoltaic characteristics of these polymers was conducted. Both polymers demonstrated enhanced photovoltaic performance and increased hole mobility compared with the BDT‐based analogue. However, the BDTT‐based polymer (with π‐conjugation extension perpendicular to main chain) gave the highest power conversion efficiency of 5.07 % for the single‐junction polymer solar cell, whereas the NDT‐based polymer (with π‐conjugation extension along the main chain) achieved the highest hole mobility of approximately 0.1 cm² V^?1 s^?1 based on the field‐effect transistor; this indicated that extending the π conjugation in different orientations would have a significant influence on the properties of the resulting polymers.     

Calorimetric and Dielectric Study of the Segmented Biodegradable Poly(ester‐urethane)s Based on Bacterial Poly[(R)‐3‐hydroxybutyrate]

Two series of segmented poly(ester‐urethane)s were synthesized from bacterial poly[(R)‐3‐hydroxybutyrate]‐diol (PHB‐diol), as hard segments, and either poly(ε‐caprolactone)‐diol (PCL‐diol) or poly(butylene adipate)‐diol (PBA‐diol), as soft segments, using 1,6‐hexamethylene diisocyanate as a chain extender. The hard‐segment content varied from 0 to 50 wt.‐%. These materials were characterized using ¹H NMR spectroscopy and GPC. The polymers obtained were investigated calorimetrically and dielectrically. DSC showed that the T_g of either the PCL or PBA soft segments are shifted to higher temperatures with increasing PHB hard‐segment content, revealing that either the PCL or PBA are mixed with small amounts of PHB in the amorphous domains. The results also showed that the crystallization of soft or hard segments was physically constrained by the microstructure of the other crystalline phase, which results in a decrease in the degree of crystallinity of either the soft or hard segments upon increase of the other component. The dielectric spectra of poly(ester‐urethane)s, based on PCL and PHB, showed two primary relaxation processes, designated as α_S and α_H, which correspond to glass–rubber transitions of PCL soft and PHB hard segments, respectively. Whereas in the case of other poly(ester‐urethane)s, derived from PBA and PHB, only one relaxation process was observed, which broadens and shifts to higher temperature with increasing PHB hard‐segment content. It was concluded from these results that our investigated materials exhibit micro‐phase separation of the hard and soft segments in the amorphous domains.     

1,3‐Benzothiazoles as Antimicrobial Agents

Starting from 2‐amino‐1,3‐mercaptobenzothiazoles recently reported ( 1a , 1b , 1c , 1d , 1e , 1f , 1g , 1h ), a series of the corresponding 2‐mercapto‐1,3‐benzothiazole isosters ( 2a , 2b , 2c , 2d , 2e , 2f , 2g , 2h ) were screened for their in vitro antibacterial and antifungal activities. Results underline that the presence of the mercapto moiety at the 2‐position of the heterocyclic nucleus is crucial for activity against bacteria. The biological screening against Candida spp. identified commercial 2f as the most promising compound as antifungal against Candida albicans and tropicalis. Molecular modeling studies supported these results. Then, to enlarge structure‐activity relationship (SAR) studies on series 1 , newly synthesized compounds ( 1k , 1l , 1m , 1n , 1o , 1p ) were reported. All the compounds belonging to this series and bearing a bulky substituent at the 6‐position of the aryl moiety showed high antifungal activity.     

Trimodal Control of Ion‐Transport Activity on Cyclo‐oligo‐(1→6)‐β‐D‐glucosamine‐Based Artificial Ion‐Transport Systems

Cyclo‐oligo‐(1→6)‐β‐D ‐glucosamines functionalized with hydrophobic tails are reported as a new class of transmembrane ion‐transport system. These macrocycles with hydrophilic cavities were introduced as an alternative to cyclodextrins, which are supramolecular systems with hydrophobic cavities. The transport activities of these glycoconjugates were manipulated by altering the oligomericity of the macrocycles, as well as the length and number of attached tails. Hydrophobic tails of 3 different sizes were synthesized and coupled with each glucosamine scaffold through the amide linkage to obtain 18 derivatives. The ion‐transport activity increased from di‐ to tetrameric glucosamine macrocycles, but decreased further when flexible pentameric glucosamine was introduced. The ion‐transport activity also increased with increasing length of attached linkers. For a fixed length of linkers, the transport activity decreased when the number of such tails was reduced. All glycoconjugates displayed a uniform anion‐selectivity sequence: Cl^?>Br^?>I^?. From theoretical studies, hydrogen bonding between the macrocycle backbone and the anion bridged through water molecules was observed.     

Synthesis and characterization of poly(β‐hydroxybutyrate) and poly(ϵ‐caprolactone) copolyester by transesterification

To synthesize the copolyester of poly(β‐hydroxybutyrate) (PHB) and poly(?‐caprolactone) (PCL), the transesterification of PHB and PCL was carried out in the liquid phase with stannous octoate as the catalyzer. The effects of reaction conditions on the transesterification, including catalyzer concentration, reaction temperature, and reaction time, were investigated. The results showed that both rising reaction temperature and increasing reaction time were advantageous to the transesterification. The sequence distribution, thermal behavior, and thermal stability of the copolyesters were investigated by ¹³C NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, optical microscopy, and thermogravimetric analysis. The transesterification of PHB and PCL was confirmed to produce the block copolymers. With an increasing PCL content in the copolyesters, the thermal behavior of the copolyesters changed evidently. However, the introduction of PCL segments into PHB chains did not affect its crystalline structure. Moreover, thermal stability of the copolyesters was little improved in air as compared with that of pure PHB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1893–1903, 2002     

Reactivity Controlling Factors for an Aromatic Carbon‐Centered σ,σ,σ‐Triradical: The 4,5,8‐Tridehydroisoquinolinium Ion

The chemical properties of the 4,5,8‐tridehydroisoquinolinium ion (doublet ground state) and related mono‐ and biradicals were examined in the gas phase in a dual‐cell Fourier‐transform ion cyclotron resonance (FT‐ICR) mass spectrometer. The triradical abstracted three hydrogen atoms in a consecutive manner from tetrahydrofuran (THF) and cyclohexane molecules; this demonstrates the presence of three reactive radical sites in this molecule. The high (calculated) electron affinity (EA=6.06 eV) at the radical sites makes the triradical more reactive than two related monoradicals, the 5‐ and 8‐dehydroisoquinolinium ions (EA=4.87 and 5.06 eV, respectively), the reactivity of which is controlled predominantly by polar effects. Calculated triradical stabilization energies predict that the most reactive radical site in the triradical is not position C4, as expected based on the high EA of this radical site, but instead position C5. The latter radical site actually destabilizes the 4,8‐biradical moiety, which is singlet coupled. Indeed, experimental reactivity studies show that the radical site at C5 reacts first. This explains why the triradical is not more reactive than the 4‐dehydroisoquinolinium ion because the C5 site is the intrinsically least reactive of the three radical sites due to its low EA. Although both EA and spin–spin coupling play major roles in controlling the overall reactivity of the triradical, spin–spin coupling determines the relative reactivity of the three radical sites.     

Preparation of Clickable Poly(3‐hydroxyalkanoate) (PHA): Application to Poly(ethylene glycol) (PEG) Graft Copolymers Synthesis

A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol⁻¹, respectively. All products were fully characterized using GPC, ¹H, and COSY NMR.

     

Poly[(R)‐3‐hydroxybutyrate)]/poly(styrene) blends compatibilized with the relevant block copolymer

A novel triblock copolymer PS–PHB–PS based on the microbial polyester Poly[(R)‐3‐hydroxybutyrate)] (PHB) and poly(styrene) (PS) was prepared to be used as compatibilizer for the corresponding PHB/PS blends. It was prepared in a three‐step procedure consisting of (i) transesterification reaction between ethylene glycol and a high‐molecular‐weight PHB, (ii) synthesis of bromo‐terminated PHB macroinitiator, and (iii) atom transfer radical polymerization polymerization of styrene initiated by the PHB‐based macroinitiator. Fourier transform infrared, gel permeation chromatography, ¹H‐, and ¹³C‐NMR spectroscopies were used to determine the molecular structure and/or end‐group functionalities at each step of the procedure. Although thermogravimetric analysis showed that the block copolymer underwent a stepwise thermal degradation and had better thermal stability than their respective homopolymers, differential scanning calorimetry displayed that the PHB block in the copolymer could not crystallize, and thus generating a total amorphous structure. Atomic force microscopy images indicated that the block copolymer was phase segregated in a well‐defined morphological structure with nanodomain size of ～40 nm. Contact angle measurements proved that the wettability properties of the block copolymer were in between those of the PHB and PS homopolymers. Blends analyzed for their morphology and thermal properties showed good miscibility and had well‐defined morphological features. Polymer blends exhibited lower crystallinity and decreased stiffness which was proportional to the amount of compatibilizer content in the blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Observation of a CuII2(μ‐1,2‐peroxo)/CuIII2(μ‐oxo)2 Equilibrium and its Implications for Copper–Dioxygen Reactivity

Synthesis of small‐molecule Cu₂O₂ adducts has provided insight into the related biological systems and their reactivity patterns including the interconversion of the Cu^II₂(μ‐η²:η²‐peroxo) and Cu^III₂(μ‐oxo)₂ isomers. In this study, absorption spectroscopy, kinetics, and resonance Raman data show that the oxygenated product of [(BQPA)Cu^I]⁺ initially yields an “end‐on peroxo” species, that subsequently converts to the thermodynamically more stable “bis‐μ‐oxo” isomer (K_eq=3.2 at ?90 °C). Calibration of density functional theory calculations to these experimental data suggest that the electrophilic reactivity previously ascribed to end‐on peroxo species is in fact a result of an accessible bis‐μ‐oxo isomer, an electrophilic Cu₂O₂ isomer in contrast to the nucleophilic reactivity of binuclear Cu^II end‐on peroxo species. This study is the first report of the interconversion of an end‐on peroxo to bis‐μ‐oxo species in transition metal‐dioxygen chemistry.     

Symmetry Breaking in Pyrrolo[3,2‐b]pyrroles: Synthesis,Solvatofluorochromism and Two‐photon Absorption

Five centrosymmetric and one dipolar pyrrolo[3,2‐b ]pyrroles, possessing either two or one strongly electron‐withdrawing nitro group have been synthesized in a straightforward manner from simple building blocks. For the symmetric compounds, the nitroaryl groups induced spontaneous breaking of inversion symmetry in the excited state, thereby leading to large solvatofluorochromism. To study the origin of this effect, the series employed peripheral structural motifs that control the degree of conjugation via altering of dihedral angle between the 4‐nitrophenyl moiety and the electron‐rich core. We observed that for compounds with a larger dihedral angle, the fluorescence quantum yield decreased quickly when exposed to even moderately polar solvents. Reducing the dihedral angle (i.e., placing the nitrobenzene moiety in the same plane as the rest of the molecule) moderated the dependence on solvent polarity so that the dye exhibited significant emission, even in THF. To investigate at what stage the symmetry breaking occurs, we measured two‐photon absorption (2PA) spectra and 2PA cross‐sections (σ_2PA) for all six compounds. The 2PA transition profile of the dipolar pyrrolo[3,2‐b ]pyrrole, followed the corresponding one‐photon absorption (1PA) spectrum, which provided an estimate of the change of the permanent electric dipole upon transition, ≈18 D. The nominally symmetric compounds displayed an allowed 2PA transition in the wavelength range of 700–900 nm. The expansion via a triple bond resulted in the largest peak value, σ_2PA=770 GM, whereas altering the dihedral angle had no effect other than reducing the peak value two‐ or even three‐fold. In the S ₀→S ₁ transition region, the symmetric structures also showed a partial overlap between 2PA and 1PA transitions in the long‐wavelength wing of the band, from which a tentative, relatively small dipole moment change, 2–7 D, was deduced, thus suggesting that some small symmetry breaking may be possible in the ground state, even before major symmetry breaking occurs in the excited state.     

Binding conformations,QSAR, and molecular design of Alkene‐3‐quinolinecarbonitriles as Src inhibitors

A theoretical study on binding orientations and quantitative structure–activity relationship (QSAR) of a novel series of alkene‐3‐quinolinecarbonitriles acting as Src inhibitors has been carried out by using the docking study and three‐dimensional QSAR (3D‐QSAR) analyses. The appropriate binding orientations and conformations of these compounds interacting with Src kinase were revealed by the docking studies, and the established 3D‐QSAR models show significant statistical quality and satisfactory predictive ability, with high R² values and q² values: comparative molecular field analysis (CoMFA) model (q² = 0.748, R² = 0.972), comparative molecular similarity indices analysis (CoMSIA) model (q² = 0.731, R² = 0.987). The systemic external validation indicated that both CoMFA and CoMSIA models possessed high predictive powers with $ R{^2}_{\!\!\!\rm pred} $ values of 0.818 and 0.892, $ {r^2}_{\!\!\!\rm m} $ values of 0.879 and 0.886, $ {r^2}_{\!\!\!\rm m(LOO)} $ values of 0.874 and 0.874, $ r^2_{\rm m(overall)} $ values of 0.879 and 0.885, respectively. Several key structural features of the compounds responsible for inhibitory activity were discussed in detail. Based on these structural factors, eight new compounds with quite higher predicted Src‐inhibitory activities have been designed and presented. We hope these theoretical results can offer some valuable references for the pharmaceutical molecular design as well as the action mechanism analysis. © 2012 Wiley Periodicals, Inc.     

The ambident electrophilic behavior of 5‐nitro‐3‐X‐thiophenes in σ‐complexation processes

Kinetics of the reactions of 3,5‐dinitrothiophene 1 and 3‐cyano‐5‐nitrothiophene 2 with a series of parasubstituted phenoxide anions 3a–c have been investigated in aqueous solution at 20°C. Two unsubstituted electrophilic centers (C(2) and C(4)) of the two thiophenes have been identified. The Fukui functions correctly predict the C(2) and C(4) atoms as the most electrophilic centers of these electron‐deficient thiophenes 1 and 2 . Analysis of the experimental data in terms of Brønsted relationships reveals that the reaction mechanism likely involves a single‐electron transfer (SET) process. The excellent correlations upon plotting the rate constants versus the oxidation potentials E^o values is an additional evidence that reactions between thiophenes and phenoxide anions are proceeding through an initial electron transfer. It is of particular interest to note that the systems studied in this paper provide a rare example of a SET mechanism in σ‐complexation reactions. According to the free energy relationship log k = s(N + E) (Angew. Chem., Int. Ed. Engl., 1994, 33, 938–957), the electrophilicity parameters E of the C‐4 and C‐2 positions of the thiophenes have been determined and compared with the reactivities of other ambident electrophiles. On the other hand, the second‐order rate constants for the reactions of these thiophenes with the hydroxide ion has been measured in water and 50% water–50% acetonitrile and found to agree with those calculated theoretically using Mayr's equation from the E values determined in this work and from the previously published N and s parameters of OH⁻.     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.