Sequence Analysis for Alternating Copolymers by MALDI‐TOF‐MS: Importance of Initiator Selectivity for Comonomer Pair

A special initiator for metal‐catalyzed living radical polymerization facilitates sequence analyses by matrix‐assisted laser desorption/ionization time of flight mass spectrometry (MALDI‐TOF‐MS) of alternating copolymers from styrene and maleimide derivatives. The initiator is a malonate‐based alkyl halide (DEMM‐Br), in which two ester groups are attached on the carbon neighboring to bromide, and poor electron density of the radical species allows determination of next unit to the initiator in resultant alternating copolymers due to the selective initiation to styrene derivative. Thanks to the well‐defined α‐end group, sequence of the oligomeric products via radical copolymerization of PMS and EMI with DEMM‐Br can be more simply analyzed by MALDI‐TOF‐MS, and indeed the following are clarified: the crossover propagation is almost perfectly controlled regardless of the injection ratio; a minor error event of the disordered alternating sequence containing St–St sequential unit could take place; the minor error can be suppressed with an excess amount of maleimide.

     

1:2‐sequence‐regulated radical copolymerization of naturally occurring terpenes with maleimide derivatives in fluorinated alcohol

Naturally occurring bulky terpenes, such as (+)‐ and (–)‐limonene and (–)‐β‐pinene, were quantitatively copolymerized with maleimide (MI) derivatives (i.e., phenyl‐, cyclohexyl‐, ethyl‐, and unsubstituted‐MI) in PhC(CF₃)₂OH solvent via selective 1:2‐alternating propagation governed by the penultimate effect, which resulted in 1:2‐sequence regulated polymers with relatively high glass transition temperatures and optical activities. Similar petroleum‐derived bulky olefins possessing cyclohexenyl, cyclohexyl, or additional α‐methyl substituents were copolymerized with phenylmaleimide via preferential 1:2‐alternating propagation with a slightly lower selectivity. A further decrease in the bulkiness of nonpolar olefins increased the 1:1‐alternating sequence. The copolymerization of limonene and acrylonitrile also proceeded approximately via 1:1‐alternating propagation, in which the penultimate effect was less observable. Furthermore, when methylene chloride was used instead of fluorinated alcohol for the copolymerization of limonene and phenylmaleimide, the length of the sequence of MI units increased. Thus, in addition to the characteristic MI skeleton, the bulky and rather specific structure of either limonene or β‐pinene induces 1:2‐selective propagation via the penultimate effect, whereas the fluoroalcohol diminishes the homopropagation of MI via a hydrogen bonding interaction with the MI unit. RAFT copolymerization of limonene and various MI derivatives in PhC(CF₃)₂OH successfully proceeded to give the end‐to‐end 1:2‐sequence‐regulated copolymer with a selective initiating sequence and predominant capping sequence using an appropriate RAFT agent. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A novel synthetic strategy for copolymers of vinyl alcohol: Radical copolymerization of alkoxyvinylsilanes with styrene and oxidative transformation of C?Si(OR)2Me into C?OH in the copolymers to afford poly(vinyl alcohol‐ran‐styrene)s

As a novel synthetic strategy for copolymers of vinyl alcohol, we propose herein copolymerization of alkoxyvinylsilanes with other vinyl monomers, followed by oxidative cleavage of the alkoxysilyl groups attached to the main chain of the resulting copolymers. Radical copolymerization of di(isobutoxy)methylvinylsilane 1 with styrene afforded poly( 1 ‐ran‐styrene)s with a variety of compositions of both repeating units, although the M_n's (<9000) and yields (<35%) were rather low. The oxidative cleavage of the alkoxysilyl groups in the copolymers with m‐chloroperbenzoic acid proceeded efficiently, giving poly(vinyl alcohol‐ran‐styrene)s, which were soluble in common organic solvents. The structures of the poly(vinyl alcohol‐ran‐styrene)s were characterized by NMR, GPC, elemental analysis, and matrix‐assisted laser desorption time‐of‐flight mass spectrometry (MALDI‐TOF‐MS). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3648–3658, 2007     

Synthesis of poly(vinylene arsine)s through the ring‐collapsed radical alternating copolymerization of an organoarsenic homocycle with aliphatic acetylenes and their properties

Poly(vinylene arsine)s with no aromatic substituent ([? CH?CR? AsMe? ]_n) were prepared through a radical alternating copolymerization of acetylenic compounds having an alkyl substituent with an organoarsenic homocycle as an arsenic‐atomic biradical equivalent. The radical reaction between 1‐octyne and pentamethylcyclopentaarsine, with a catalytic amount of 2,2′‐azobisisobutyronitrile without a solvent (60 °C, 10 h), produced the corresponding poly(vinylene arsine)s (45% yield). The copolymers obtained were soluble in tetrahydrofuran, chloroform, hexane, and so on. The copolymers were characterized with ¹H and ¹³C NMR spectra. The number‐average molecular weights of the copolymers were estimated with gel permeation chromatography (chloroform and polystyrene standards) to be 6500. The copolymers showed an emission property attributable to the n–π* transition in the main chain. Irradiation by an incandescent lamp of a mixture of 1‐octyne and 1 also produced poly(vinylene arsine)s. The conversion rate of 1‐octyne during the copolymerization with 2,2′‐azobisisobutyronitrile was measured with gas chromatography analysis and was found to be much slower than that of phenylacetylene. A radical terpolymerization of cyclo‐(AsMe)₅ with 1‐octyne and styrene was carried out to yield the terpolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3604–3611, 2004     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Copolymerization of ethylene with styrene catalyzed by a linked bis(phenolato) titanium catalyst

Copolymerization of ethylene with styrene, catalyzed by 1,4‐dithiabutanediyl‐linked bis(phenolato) titanium complex and methylaluminoxane, produced exclusively ethylene–styrene copolymers with high activity. Copolymerization parameters were calculated to be r_E = 1.2 for ethylene and r_S = 0.031 for styrene, with r_E r_S = 0.037 indicating preference for alternating copolymerization. The copolymer microstructure can be varied by changing the ratio between the monomers in the copolymerization feed, affording copolymers with styrene content up to 68%. The copolymer microstructure was fully elucidated by ¹³C NMR spectroscopy revealing, in the copolymers with styrene content higher than 50%, the presence of long styrene–styrene homosequences, occasionally interrupted by isolated ethylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1908–1913, 2006     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Alternating copolymerization of N-(alkyl-substituted phenyl)maleimides with isobutene and thermal properties of the resulting copolymers

Radical copolymerization of N-(alkyl-substituted phenyl)maleimides (RPhMI) with isobutene (IB) was carried out with an initiator in various solvents at 60°C. The copolymerization of N-(2,6-diethylphenyl)maleimide (2,6-DEPhMI) with IB in benzene proceeded readily in a homogeneous system to give an alternating copolymer over a wide range of the comonomer compositions in the feed. Whereas the alternating tendency of the copolymerization of other RPhMI with IB decreased depending on the alkyl substituents of RPhMI in the following order: 2,6-DEPhMI > N-(2,6-dimethylphenyl)maleimide ≥ N-(2-methylphenyl)maleimide >. N-(4-ethylphenyl)maleimide. The copolymerization reactivities were discussed based on the rate constants for the homo-propagations and cross-propagations. Subsequently, the effect of the solvent on the rate and the reactivity ratios was examined. It was revealed that the copolymerization in chloroform proceeded with higher alternating tendency at a higher copolymerization rate than in the copolymerizations in benzene or dioxane. The copolymers of RPhMI with IB showed excellent thermal stability, i.e., high glass transition temperature and initial decomposition temperature over 200 and 350°C, respectively. © 1996 John Wiley & Sons, Inc.     

An alternating copolymer of maleimide and atropic acid with narrow molecular weight distribution prepared by radical mechanism

Three basic conditions for preparation of alternating copolymer with narrow molecular weight distribution were derived from the element kinetic equations of binary radical copolymerization. Using maleimide (MI) and atropie acid (ATA) as model monomer pairs and dioxane as the solvent the alternating copolymer with molecular weight distribution in the range of 1.09--1.20 was prepared successfully by charger transfer complex (CTC) mechanism in the presence of benzoyl peroxide at 85℃. The monomer reactivity ratioes r_1(MI)=0.05±0.01 and r_2(ATA)=0.03±0.02 were measured. The alternating eopolymerization was carried out through formation of a contact-type CTG and then alternating addition of MI and ATA monomers. The molecular weight of the copolymers is nearly independent of the feed ratio in a large range and the polymerization rate dropped with an increase in ATA in feed ratio.     

Facile,efficient functionalization of polyethylene via regioselective copolymerization of ethylene with cyclic dienes

The copolymerizations of ethylene with cyclic dienes [dicyclopentadiene (DCPD) and 2,5‐norbornadiene (NBD)] using bis(β‐enaminoketonato)titanium complexes [PhN = C(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = t‐Bu, R₂ = CF₃; 1c : R₁ = Ph, R₂ = CF₃) have been investigated. In the presence of modified methylaluminoxane, these complexes exhibited high catalytic activities in the copolymerization of ethylene with DCPD or NBD, affording high molecular weight copolymers with unimodal molecular weight distributions. ¹H and ¹³C‐NMR spectra reveal ethylene/DCPD copolymerizations by catalysts 1a – c proceeds through the enchainment of norbornene ring. Catalysts 1a and 1c showed a tendency to afford alternating copolymers. More noticeably, catalysts 1b and 1c bearing bulky substituents on the ligands promote ethylene/NBD copolymerization without crosslinking, affording the copolymer containing intracyclic double bonds. The NBD incorporation as high as 27.2 mol % has been achieved by catalyst 1c . Moreover, the microstructures of the copolymers were further confirmed by the measurement of reactivity ratios and dyad monomer sequences as well as mean sequence lengths. The intracyclic double bonds of ethylene/DCPD or ethylene/NBD copolymers can be fully converted into polar groups such as epoxy, amine, silane, and hydroxyl groups under mild conditions. Convenient synthesis of hydroxylated polyethylene can be provided for the first time through the ring opening reaction of epoxide. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1764–1772, 2010     

Selectively degradable alternating copolymers of isobutyl vinyl ether and plant‐derived aldehydes with acyclic side chains: Effects of side group structures on copolymerization behaviors

Side group structures of aldehydes were demonstrated to have decisive effects on cationic copolymerizations with alkyl vinyl ether (VE). Alternating copolymerizations of isobutyl VE (IBVE) and plant‐derived aldehydes with acyclic side chains such as trans‐2,cis‐6‐nonadienal, trans‐2‐nonenal, and citral proceeded under appropriate reaction conditions with the EtSO₃H/GaCl₃ initiating system. In addition, some aldehydes copolymerized in a well‐controlled fashion to yield alternating copolymers with controlled molecular weights and narrow molecular weight distributions. Quantitative and selective acid hydrolysis of the resulting alternating copolymers, based on the acetal structures in the main chains, was also achieved to give other conjugated aldehydes as nearly sole degradation products. Copolymerization results of IBVE and various plant‐derived aldehydes with acyclic or cyclic side groups suggested that electron‐donating ability and bulkiness of the side groups were most likely responsible for the alternating and/or controlled copolymerization behaviors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4684–4693     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

Maleimide Glycidyl Ether: A Bifunctional Monomer for Orthogonal Cationic and Radical Polymerizations

A novel bifunctional monomer, namely maleimide glycidyl ether (MalGE), prepared in a four‐step reaction sequence is introduced. This monomer allows for selective (co)polymerization of the epoxide group via cationic ring‐opening polymerization, preserving the maleimide functionality. On the other hand, the maleimide functionality can be copolymerized via radical techniques, preserving the epoxide moiety. Cationic ring‐opening multibranching copolymerization of MalGE with glycidol was performed, and a MalGE content of up to 24 mol% could be incorporated into the hyperbranched polymer backbone (M_n = 1000–3000 g mol⁻¹). Preservation of the maleimide functionality during cationic copolymerization was verified via NMR spectroscopy. Subsequently, the maleimide moiety was radically crosslinked to generate hydrogels and additionally employed to perform Diels‐Alder (DA) “click” reactions with (functional) dienes after the polymerization process. Radical copolymerization of MalGE with styrene (M_n = 5000–9000 g mol⁻¹) enabled the synthesis of a styrene copolymer with epoxide functionalities that are useful for versatile crosslinking and grafting reactions.

     

Synthesis of Copolymers by Living Carbanionic Alternating Copolymerization

The synthesis and characterization of copolymers from styrene and 1,3‐pentadiene (two isomers) are reported. Styrene/1,3‐pentadiene (1:1) copolymerization with carbanion initiator yield living, well‐defined, alternating (r₁ = 0.037, r₂ = 0.056), and highly stereoregular copolymers with 90%–100% trans‐1,4 units, designed M_ns and low Ð_Ms (1.07–1.17). The first‐order kinetic resolution and NMR spectra demonstrate that the copolymers obtained possess strictly alternating structure containing both 1,4‐ and 4,1‐enchaiments. Also a series of copolymers with varying degrees of alternation are synthesized from para‐alkyl substituted styrene derivatives and 1,3‐pentadiene. The degree of alternation is strongly dependent on the polarity of solvent, reaction temperature, type of trans‐cis isomer of 1,3‐pentadiene and para‐substituted group in styrene. The macro zwitterion forms (SPC) through the distribution of electronic charges from the donor (1,3‐pentadiene) to the acceptor (styrenes) are proposed to interpret the carbanion alternating copolymerization mechanism. Owing to the versatility of the carbanion‐initiating reaction, the present alternating strategy based on 1,3‐pentadiene (especially cis isomer) can serve as a powerful tool for precise control of polymer chain microstructure, architecture, and functionalities in one‐pot polymerization.

     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Radical copolymerization of alkyl cyclobutenecarboxylates fused with cycloaliphatic framework with alkyl (meth)acrylates

Radical copolymerization behavior of alkyl cyclobutenecarboxylate‐derivatives 4‐6 and related norbornene‐derived compounds 7–9 is described. A variety of alkyl cyclobutenecarboxylates fused with cycloaliphatic framework ( 4–6 ) were prepared by [2 + 2] cycloaddition of five, six, and eight‐membered cycloolefins with alkyl propiolates [alkyl = Me, 2‐hydroxyethyl, and 3‐γ‐butyrolactonyl (γ‐BL)]. The fused cyclobutenecarboxylates 4–6 were radically copolymerized with n‐butyl acrylate (nBA) to afford random copolymers, and terpolymerized with alkyl methacrylates with bulky ester groups [alkyl = γ‐BL and 3‐(3‐methyladamantyl)]. The cyclobutane‐containing bicyclic framework incorporated in the resulting polymer backbone contributes to raising T_g of resulting copolymers. Similar results were obtained when a mixture of related norbornene‐derived compounds were used as monomers with an apparently enhanced T_g‐raising effect in the copolymerization with nBA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2716–2724     

Efficient solvent‐free alternating copolymerization of CO2 with 1, 2‐epoxydodecane and terpolymerization with styrene oxide via heterogeneous catalysis

The alternating copolymerization of CO₂ with the terminated epoxides anchoring long alkyl groups is rarely reported because of their low reactivity and polycarbonate selectivity. This work describes a well‐controlled solvent‐free copolymerization of CO₂ with 1, 2‐epoxydodecane (EDD) with a long electron‐donating alkyl group via the catalysis of Zn‐Co(III) double metal cyanide complex catalyst. The productivity of the catalyst was up to 2406 g polymer/g Zn, that is, EDD conversion was 99.2%. The alternating degree of CO₂‐EDD copolymers were more than 99% and had high number‐average molecular weights (M_ns) of >100 kg mol^?1, while only 1.0 wt % 4‐decyl‐1,3‐dioxolan‐2‐one (DC) were detected. Moreover, by introducing styrene oxide (SO) with electron‐withdrawing phenyl group into EDD‐CO₂ copolymerization system, a new random terpolymer with either electron‐withdrawing or electron‐donating side groups was produced with single glass transition temperatures (T_gs) in a wide range from 3 to 56 °C, which might be potentially used as biodegradable elastomers or plastics. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 737–744     

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylate with alkyl acrylates: Facile incorporation of norbornane framework into poly(alkyl acrylate)s

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylates (alkyl = Me 1a , nBu 1b ) with alkyl acrylates (alkyl = ethyl, methyl, and n‐butyl) was investigated. Copolymerization of 1a,b with the alkyl acrylates initiated by 1,1′‐azobis (cyclohexane‐1‐carbonitrile) at 85 °C proceeded to give random copolymers, although the homopolymerization of 1a,b did not proceed efficiently under the same conditions. Typically, bulk copolymerization of 1a with ethyl acrylate in a feed ratio of 1:3 ([ 1a ]:[EA]) afforded a copolymer with M_n = 33,300 containing 19.4 mol % of 1a unit in the composition. An increase of T_g derived from the incorporation of the rigid norbornane framework was observed, although the extent of the temperature rise was rather moderate. The ternary radical copolymerization of 1a,b /alkyl acrylate/N‐phenylmaleimide proceeded to give copolymers with the three repeating units in the main chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4597–4605, 2007     

Copolymerization of styrene and conjugated dienes with half‐sandwich titanium(IV) catalysts: The effect of the ligand structure on the monomer reactivity,monomer sequence distribution,and insertion mode of dienes

The copolymerization of styrene and 1,3‐butadiene (Bd) or isoprene (Ip) was carried out with half‐sandwich titanium(IV) Cp′TiCl₃ catalysts (where Cp′ is cyclopentadienyl 1 , indenyl 2 , or pentamethylcyclopentadienyl 3 ) with methylaluminoxane as a cocatalyst. For the copolymerization with Bd, catalyst 3 gave the copolymers containing the highest amount of Bd among the catalysts used. The resulting copolymers were composed of a styrene–Bd multiblock sequence. High melting points were observed in the copolymers prepared with catalyst 1 . The structures of hydrogenated poly(styrene‐co‐Bd) were studied by ¹³C NMR spectroscopy, and the long styrene sequence length was detected in the copolymers prepared with catalyst 1 . For styrene/Ip copolymerization, random copolymers were obtained. Among the used catalysts, catalyst 1 gave the copolymers containing the highest amount of Ip. The copolymers prepared with catalyst 1 showed a steep melting point depression with increasing Ip content because of the high ratio of 1,4‐inserted Ip units and/or the low molecular weights of the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 939–946, 2003     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797