pH‐ and Redox‐Responsive Polysaccharide‐Based Microcapsules with Autofluorescence for Biomedical Applications

Autofluorescent microcapsules were assembled by covalent cross‐linking of polysaccharide alginate dialdehyde (ADA) derivative and cystamine dihydrochloride (CM) through a layer‐by‐layer (LBL) technique. The formulated Schiff base and disulfide bonds render capsules with pH‐ and redox‐responsive properties for pinpointed intracellular delivery based on the physiological difference between intracellular and extracellular environments. This simple and versatile method could be extended to other polysaccharide derivatives for the fabrication of autofluorescent nano‐ and micromaterials with dual stimuli response for biomedical applications.     

One‐Step Synthesis of Natural Silk Sericin‐Based Microcapsules with Bionic Structures

Different techniques are being developed for fabricating microcapsules; it is still a challenge to fabricate them in an efficient and environment‐friendly process. Here, a one‐step green route to synthesize silk protein sericin‐based microcapsules without any assistance of organic solvents is reported. By carefully changing the concentration of calcium ions accompanied with stirring, the morphology of the microcapsules can easily be regulated to form either discoidal, biconcave, cocoon‐like, or tubular structures. The chelation of Ca²⁺ and shearing force from agitation may induce the conformational transformation of sericin, which possibly results in the formation of microcapsules through the self‐assembly of the protein subsequently. The as‐prepared cocoon‐like microcapsules exhibit pH‐dependent stability. A potential application of microcapsules being fabricated from natural water‐soluble silk protein sericin for controlled bioactive molecules loading and release system by a pH‐triggered manner is quite feasible.

     

Tunable Interfacial Properties in Silk Ionomer Microcapsules with Tailored Multilayer Interactions

Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene‐glycol‐grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH‐responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).     

Multilayer Microcapsules for FRET Analysis and Two‐Photon‐Activated Photodynamic Therapy

Microcapsules obtained by layer‐by‐layer assembly provide a good platform for biological analysis owing to their component diversity, multiple binding sites, and controllable wall thickness. Herein, different assembly species were obtained from two‐photon dyes and traditional photosensitizers, and further assembled into microcapsules. Fluorescence resonance energy transfer (FRET) was shown to occur between the two‐photon dyes and photosensitizers. Confocal laser scanning microscopy (CLSM) with one‐ and two‐photon lasers, fluorescence lifetime imaging microscopy (FLIM), and time‐resolved fluorescence spectroscopy were used to analyze the FRET effects in the microcapsules. The FRET efficiency could easily be controlled through changing the assembly sequence. Furthermore, the capsules are phototoxic upon one‐ or two‐photon excitation. These materials are thus expected to be applicable in two‐photon‐activated photodynamic therapy for deep‐tissue treatment.     

Alginate‐Based Microcapsules with a Molecule Recognition Linker and Photosensitizer for the Combined Cancer Treatment

A reactive template method was used to fabricate alginate‐based hydrogel microcapsules. The uniform and well‐dispersed hydrogel capsules have a high drug loading capacity. After they are coated by a folate‐linked lipid mixture on the surface, the capsules possess higher cell uptake efficiency by the molecule recognition between folate and the folate‐receptor overexpressed by the cancer cells. Moreover, in this bioconjugate, the lipid could remarkably reduce the release rate of hydrophilic doxorubicin from the hydrogel microcapsules and encapsulate the hydrophobic photosensitizer hypocrellin B. The biointerfaced capsules could be used as drug carriers for combined treatment against cancer cell proliferation in vitro; this was much more effective than chemotherapy or photodynamic therapy alone.     

Layer‐by‐Layer Assemblies of Montmorillonite and Bacterial Cytochromes for Bioelectrocatalytic Devices

Clay‐based layer‐by‐layer architectures are studied in view of the development of new electrode materials for two highly attractive enzymatic reactions: metal bioremediation and hydrogen uptake. The buildup of layer‐by‐layer (LBL) assemblies of positively charged specific mediators of these enzymatic reactions and negatively charged montmorillonite nanoparticles were carried out onto gold and graphite electrodes. The structure and stability of the assemblies were examined using quartz crystal microgravimetry (QCM) and electrochemical techniques. Satisfactory catalytic efficiencies were observed through the LBL construction, either for bacterial cytochrome c₃‐mediated metal reduction, or hydrogen uptake via immobilized hydrogenase in the presence of an artificial shuttle, methylviologen. Interestingly, it is established that intercalating cytochrome c₃ layers between hydrogenase/montmorillonite layers not only protects hydrogenase from leaching, but allows H₂ uptake/evolution catalytic reaction without any additional diffusing redox mediator.     

Entrapment of α‐Chymotrypsin into Hollow Polyelectrolyte Microcapsules

Stable hollow polyelectrolyte capsules were produced by the layer‐by‐layer assembling of non‐biodegradable polyelectrolytes – poly(allylamine) and poly(styrenesulfonate) on melamine formaldehyde microcores followed by the core decomposition at low pH. A proteolytic enzyme, α‐chymotrypsin, was encapsulated into these microcapsules with high yields of up to 100%. The encapsulation procedure was based on the protein adsorption onto the capsule shells and on the pH‐dependent opening and closing of capsule wall pores. The protein in the capsules retained a high activity, and thermo‐ and storage stability. The nanostructured polyelectrolyte shell protected the proteinase from a high molecular weight inhibitor. Such enzyme‐loaded capsules can be used as microreactors for biocatalysis.     

Fabrication of silk fibroin film with properties of thermal insulation and temperature monitoring

Silk fibroin exhibits excellent mechanical properties, good biocompatibility, and biodegradability combined with benign processing conditions, attracting considerable research interest for the application as biomedical materials. Among the diverse forms of sponges, hydrogels, films, and mats manufactured from silk fibroin, films are especially appealing due to the high water and oxygen permeability, good cell attachment, and low immunogenicity. Fabrication of silk fibroin films with novel properties has been successfully developed simply by incorporating various functional components into it. In the present study, the properties of thermal insulation and temperature monitoring for the silk fibroin film are demonstrated for the first time through the incorporation of thermochromic microcapsules within it. Moreover, the silk fibroin film is also endowed with improved mechanical properties in terms of tension strength and elongation at break because of the reinforcing effect of thermochromic microcapsules. The silk fibroin film fabricated with novel features in this study can be a good candidate for the application of wound dressings, tissue engineering scaffolds, and bio‐related devices in the future. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1846–1852     

New Polyurethane/Docosane Microcapsules as Phase‐Change Materials for Thermal Energy Storage

Polyurethane microcapsules were prepared by mini‐emulsion interfacial polymerization for encapsulation of phase‐change material (n‐docosane) for energy storage. Three steps were followed with the aim to optimize synthesis conditions of the microcapsules. First, polyurethane microcapsules based on silicone oil core as an inert template with different silicone oil/poly(ethylene glycol)/4,4′‐diphenylmethane diisocyanate wt % ratio were synthesized. The surface morphology of the capsules was analyzed by scanning electronic microscopy (SEM) and the chemical nature of the shell was monitored by Fourier transform infrared spectroscopy (FT‐IR). Capsules with the silicone oil/poly(ethylene glycol)/4,4′‐diphenylmethane diisocyanate 10/20/20 wt % ratio showed the best morphological features and shell stability with average particle size about 4 μm, and were selected for the microencapsulation of the n‐docosane. In the second stage, half of the composition of silicone oil was replaced with n‐docosane and, finally, the whole silicone oil content was replaced with docosane following the same synthetic procedure used for silicone oil containing capsules. Thermal and cycling stability of the capsules were investigated by thermal gravimetric analysis (TGA) and the phase‐change behavior was evaluated by differential scanning calorimetry (DSC).     

Concentration‐dependent conformation transition of regenerated silk fibroin induced by graphene oxide nanosheets incorporation

Regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite has been substantially investigated due to its significant multifunctional potential. Here, in combination of micromorphology, crystalline conformation, dynamic mechanical property characterization, and Fourier self‐deconvolution (FSD) quantitative analysis, we investigated the RSF molecular chains conformation transition induced by GO nanosheet incorporation, and its influence on the structural and mechanical properties of solution casted RSF/GO composite films. The GO nanosheet promoted the silk fibroin molecular chains conformation transition from random coil to β‐sheet structure, and a correlation between β‐sheet structure fraction and GO concentration was revealed. The β‐sheet structure fraction increases further improved the dynamic mechanical property of composite films. Moreover, based on nucleation‐dependent aggregation of silk fibroin molecular chains, a mechanism considering the competition effect between GO concentration and its total surface area was proposed to explain the observed concentration‐dependent conformation transition phenomenon. The study improves our understanding on silk fibroin conformation transition process in RSF/GO composite and would provide a valuable reference for the rational design of bioinspired multifunctional materials with enhanced mechanical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1506–1515     

Thermo‐physical properties of polypropylene fibers containing a microencapsulated flame retardant

A microencapsulated flame retardant with a melamine‐formaldehyde shell was prepared by in situ polymerization, then incorporated into an iPP matrix with a coupling agent to manufacture multifilament yarns by melt spinning. The influence of the post‐treatment on the resulted microcapsules with an alcoholic solution was also studied. The spinnability of these formulations based on the interface characterization from contact angle measurements, tensile test and thermal characterizations was explored to determine the maximum draw ratio (DR) to apply. Finally, knitted fabrics were processed from multifilaments, and their flame‐retardant properties were evaluated by performing fire tests according to the FMVSS 302 and Din 4102 part B experiments. The different mechanical and thermal behaviors were discussed in terms of the influence of the DR and the post‐treatment applied on fibers during the spinning process and during the recovery of the microcapsules, respectively. The results showed that it was possible to obtain multifilament yarns with a DR of 4, but the best properties were obtained with a DR of 3 and for un‐treated microcapsules. Furthermore, the samples containing un‐treated microcapsules reach a B rating at the FMVSS test with a fast flame progression and a very low duration of burning. Copyright © 2012 John Wiley & Sons, Ltd.     

Permeability and micromechanical properties of silk ionomer microcapsules

We studied the pH-responsive behavior of layer-by-layer (LbL) microcapsules fabricated from silk fibroin chemically modified with different poly amino acid side chains: cationic (silk-poly l-lysine, SF-PL) or anionic (silk-poly-l-glutamic acid, SF-PG). We observed that stable ultrathin shell microcapsules can be assembled with a dramatic increase in swelling, thickness, and microroughness at extremely acidic (pH < 2.5) and basic (pH > 11.0) conditions without noticeable disintegration. These changes are accompanied by dramatic changes in shell permeability with a 2 orders of magnitude increase in the diffusion coefficient. Moreover, the silk ionomer shells undergo remarkable softening with a drop in Young's modulus by more than 1 order of magnitude due to the swelling, stretching, and increase in material porosity. The ability to control permeability and mechanical properties over a wide range for the silk-based microcapsules, with distinguishing stability under harsh environmental conditions, provides an important system for controlled loading and release and applications in bioengineering.     

Single Polyelectrolyte Microcapsules Fabricated By Glutaraldehyde‐Mediated Covalent Layer‐By‐Layer Assembly

Summary: Single polyelectrolyte component microcapsules and multilayers, exemplified by poly(allylamine hydrochloride) (PAH), have been prepared using a method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly. The GA cross‐linking of the adsorbed PAH results in surfaces covered by reactive aldehyde groups, which can then react with PAH to result in another layer of covalently linked PAH. The repeated assembly of single polyelectrolyte in an LbL manner can be thus achieved. The PAH multilayers can grow linearly along with the layer number, and their thickness can be controlled at the nanometer scale, as verified by UV‐vis absorption spectrometry and ellipsometry. Single polyelectrolyte microcapsules are obtained after removal of the template cores at low pH. The morphology and integrity are confirmed by scanning force microscopy and confocal laser scanning microscopy.

Schematic illustration of the preparation of a single polyelectrolyte component microcapsule by GA‐mediated covalent LbL assembly.     

Water adsorption on the surface of Ni‐ and Co‐based layer‐structured cathode materials for lithium‐ion batteries

Ni‐based layer‐structured cathode materials are more vulnerable to moisture than conventional LiCoO₂ cathodes, adsorbing more water and easily forming LiOH on the surface. This study investigated the moisture adsorption mechanism on the surface of layer‐structured cathodes. The behavior of water molecules on LiCoO₂ and LiNiO₂ surfaces were simulated and the structural and chemical changes during the adsorption process were analyzed by first‐principles methods. It was found that the adsorption occurs via two types of mechanism: one involving ionic interactions between Li on the crystal surface and O in the adsorbate, and the other involving covalent bonding between the transition metal (TM) on the surface and O in the adsorbate, which restores the coordination of the TM by recovering its broken bonds. The difference between the water adsorption behaviors of Ni‐based and Co‐based layer‐structured cathodes was found to be mainly due to the ionic‐interaction‐driven adsorption on the (003) surface.     

Surface‐Coated Thermally Expandable Microspheres with a Composite of Polydisperse Graphene Oxide Sheets

Surface‐modified thermally expandable microcapsules (TEMs) hold potential for applications in various fields. In this work, we discussed the possible surface coating mechanism and reported the properties of TEMs coated with polyaniline (PANI) and polydisperse graphene oxide sheets (ionic liquid‐graphene oxide hybrid nanomaterial (ILs‐GO)). The surface coating of PANI/ ILs‐GO increased the corresponding particle size and its distribution range. The morphologies analyzed by scanning electron microscopy indicated that no interfacial gap was observed between the microspheres ink and substrate layer during the substrate application. The thermal properties were determined by thermogravimetric and differential thermal analyses. The addition of ILs‐GO to the polyaniline coating significantly improved the thermal expansion and thermal conductivity of the microcapsules. The evaporation of hexane present in the core of TEMs was not prevented by the coating of PANI/ ILs‐GO. The printing application of TEMs showed excellent adaptability to various flexible substrates with great 3D appearance. By incorporating a flame retardant agent into TEMs coated by PANI/ILs‐GO, finally, these TEMs also demonstrated a great flame retardant ability. We expect that these TEM‐coated PANI/ ILs‐GO are likely to have the potential to improve the functional properties for various applications.     

Length‐Dependent Charge Generation from Vertical Arrays of High‐Aspect‐Ratio ZnO Nanowires

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free‐standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high‐aspect‐ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.     

Microfluidic fabrication of polysiloxane/dimethyl methylphosphonate flame‐retardant microcapsule and its application in silicone foams

A novel and versatile route for fabricating flame‐retardant microcapsules via microfluidics technology is reported. The flame‐retardant microcapsules were prepared with a dimethyl methylphosphonate (DMMP) core and an ultraviolet‐curable (UV‐curable) polysiloxane shell. Furthermore, a UV‐curable polysiloxane was synthesized. The synthesis mechanism of UV‐curable polysiloxane and the curing mechanism of flame‐retardant microcapsules were analyzed. To verify that DMMP was encapsulated in the microcapsules, X‐ray fluorescence was used before and after microencapsulation. The resulting microcapsules were well monodispersed and exhibited a good spherical shape with a smooth surface. In addition, the size of the microcapsules decreased dramatically with an increasing flow‐rate ratio of the middle‐/inner‐phase or outer‐phase flow rate. The thermal stability of the microcapsules was worse than shell materials but superior to DMMP. Silicone foams (SiFs) with microcapsules prepared using a dehydrogenation method achieved a relatively higher limiting oxygen‐index value than the pure SiF, which indicated that the microcapsules could enhance the flame retardation of SiFs effectively. Because of the polysiloxane shell, the microcapsules had good compatibility with SiFs, and the influence of microcapsules on the mechanical properties of SiFs was unremarkable.     

Regulating Higher‐Order Organization through the Synergy of Two Self‐Sorted Assemblies

The extracellular matrix (ECM) is the natural fibrous scaffold that regulates cell behavior in a hierarchical manner. By mimicking the dynamic and reciprocal interactions between ECM and cells, higher‐order molecular self‐assembly (SA), mediated through the dynamic growth of scaffold‐like nanostructures assembled by different molecular components, was developed. Designed and synthesized were two self‐sorted coumarin‐based gelators, a peptide molecule and a benzoate molecule, which self‐assemble into nanofibers and nanobelts, respectively, with different dynamic profiles. Upon the dynamic growth of the fibrous scaffold assembled from peptide gelators, nanobelts assembled from benzoate gelators transform into a layer‐by‐layer nanosheet, reaching ninefold increase in height. By using light and an enzyme, the spatial–temporal growth of the scaffold can be modified, leading to in situ height regulation of the higher‐order architecture.     

Molecular Assembly of Polysaccharide‐Based Microcapsules and Their Biomedical Applications

Advanced multifunctional microcapsules have revealed great potential in biomedical applications owing to their tunable size, shape, surface properties, and stimuli responsiveness. Polysaccharides are one of the most acceptable biomaterials for biomedical applications because of their outstanding virtues such as biocompatibility, biodegradability, and low toxicity. Many efforts have been devoted to investigating novel molecular design and efficient building blocks for polysaccharide‐based microcapsules. In this Personal Account, we first summarize the common features of polysaccharides and the main principles of the design and fabrication of polysaccharide‐based microcapsules, and further discuss their applications in biomedical areas and perspectives for future research.