Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

Nitroxide‐mediated polymerization of 1,3‐butadiene in the presence of diphenylamine with hydrogen peroxide as initiator

Living behavior of a nitroxide‐mediated polymerization of 1,3‐butadiene in the presence of diphenyl nitroxide (DPN) as counter radical and hydrogen peroxide (H₂O₂) as initiator has been studied to elucidate the bimodal molar mass distribution of the product by four approaches such as hydrolyzation of the oligomeric product, peak separation technique, which defines the oligobutadiene molar mass dependency in relation to α as a ratio of [nitroxide] to [H₂O₂], variation of hydroxyl value with respect to α, and para‐substituted DPN. It is demonstrated that the synthesized DPN shows efficient control of the polymerization of 1,3‐butadiene, but because of the formation of difunctional nitroxide during the oxidation process of aromatic diphenylamine, a bimodal distribution in the final product is observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New 7‐membered diazepanone alkoxyamines for nitroxide‐mediated radical polymerization

The synthesis of new 7‐membered diazepanone alkoxyamines [2,2,7,7‐tetramethyl‐1‐(1‐phenyl‐ethoxy)‐[1,4]diazepan‐5‐one ( 3 ) and 2,7‐diethyl‐2,3,7‐trimethyl‐1‐(1‐phenyl‐ethoxy)‐[1,4]diazepan‐5‐one ( 8 )] through the Beckmann rearrangement of piperidin‐4‐one alkoxyamines was developed. Both 3 and 8 were evaluated as initiators and regulators for the nitroxide‐mediated radical polymerization of styrene and n‐butyl acrylate. 8 , a sterically highly hindered alkoxyamine readily available as a crystalline solid, allowed the fast and controlled polymerization and preparation of polymers with low polydispersity indices (1.2–1.4) up to a degree of polymerization of about 100. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3332–3341, 2004     

Facile and versatile synthesis of rod‐coil poly(3‐hexylthiophene)‐based block copolymers by nitroxide‐mediated radical polymerization

A well‐defined and monofunctional poly(3‐hexylthiophene)‐based (P3HT) macroinitiator has been obtained through a clean, simple, and an efficient multistep synthesis process. The macroinitiator is obtained via intermolecular radical 1,2‐addition onto an ω‐acrylate‐terminated P3HT macromonomer. In a second step, well‐defined rod‐coil block copolymers were obtained by nitroxide‐mediated radical polymerization (NMRP) using the so‐called Blocbuilder^®. The polymerization was found to be controlled with various monomers such as styrene, isoprene, 4‐vinylpyridine, or methyl acrylate. This process constitutes a very promising way to obtain versatile and clean materials for organic electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of poly(n‐hexyl isocyanate‐b‐N‐vinylpyrrolidone) block copolymers by the combination of anionic and nitroxide‐mediated radical polymerizations: Micellization properties in aqueous solutions

A combination of anionic and nitroxide‐mediated radical polymerizations (dual initiator) was employed for the synthesis of poly(n‐hexyl isocyanate‐b‐N‐vinylpyrrolidone) (PHIC‐b‐PNVP) block copolymers. The samples were characterized with a size exclusion chromatograph equipped with refractive‐index and light scattering detectors as well as ¹H NMR spectroscopy. Relatively good control over the molecular weights was achieved. However, rather broad molecular weight distributions were obtained. The micellar properties of the PHIC‐b‐PNVP block copolymers were studied in water, which is a selective solvent for the poly(N‐vinylpyrrolidone) blocks. Static and dynamic light scattering revealed the presence of equilibrium between the micelles and clusters. The clusters partially deaggregated with increasing temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5719–5728, 2006     

On the Nitroxide Quasi‐Equilibrium in the Alkoxyamine‐Mediated Radical Polymerization of Styrene

Summary: The range of validity of two popular versions of the nitroxide quasi‐equilibrium (NQE) approximation used in the theory of kinetics of alkoxyamine mediated styrene polymerization, are systematically tested by simulation comparing the approximate and exact solutions of the equations describing the system. The validity of the different versions of the NQE approximation is analyzed in terms of the relative magnitude of (dN/dt)/(dP/dt). The approximation with a rigorous NQE, k_c[P][N] = k_d[P N], where P, N and P N are living, nitroxide radicals and dormant species respectively, with kinetic constants k_c and k_d, is found valid only for small values of the equilibrium constant K (10⁻¹¹–10⁻¹² mol · L⁻¹) and its validity is found to depend strongly of the value of K. On the other hand, the relaxed NQE approximation of Fischer and Fukuda, k_c[P][N] = k_d[P N]₀ was found to be remarkably good up to values of K around 10⁻⁸ mol · L⁻¹. This upper bound is numerically found to be 2–3 orders of magnitude smaller than the theoretical one given by Fischer. The relaxed NQE is a better one due to the fact that it never completely neglects dN/dt. It is found that the difference between these approximations lies essentially in the number of significant figures taken for the approximation; still this subtle difference results in dramatic changes in the predicted course of the reaction. Some results confirm previous findings, but a deeper understanding of the physico‐chemical phenomena and their mathematical representation and another viewpoint of the theory is offered. Additionally, experiments and simulations indicate that polymerization rate data alone are not reliable to estimate the value of K, as recently suggested.

Validity of the rigorous nitroxide quasi‐equilibrium assumption as a function of the nitroxide equilibrium constant.     

Synthesis of a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines,SG1‐CH(Me)CO2R,and measurement of the homolysis rate constants of the C?ON bond

During nitroxide‐mediated polymerization, the polymerization time decreases with an increasing rate constant of the cleavage of the NO? C bond of dormant alkoxyamines. Thus, knowledge of the factors influencing this cleavage is of considerable interest. We have prepared a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines [SG1‐CH(Me)CO₂R] with various R groups (alkyl or aryl) and measured the homolysis rate constants (k_d). k_d decreases with the bulkiness and increases with the polarity of the R group. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3504–3515, 2004     

Influence of nitroxide structure on the 2,5‐ and 2,6‐spirodicyclohexyl substituted cyclic nitroxide‐mediated free‐radical polymerization of styrene

The 2,6‐spirodicyclohexyl substituted nitroxide, cyclohexane‐1‐spiro‐2′‐(3′,5′‐dioxo‐4′‐benzylpiperazine‐1′‐oxyl)‐6′‐spiro‐1″‐cyclohexane (BODAZ), was investigated as a mediator for controlled/living free‐radical polymerization of styrene. The values of the number‐average molecular weight increased linearly with conversion, but the polydispersities were higher than for the corresponding 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) mediated systems at approximately 2.2 and 1.6 at 100 and 120 °C, respectively. These results were reflected in the rate coefficients obtained by electron spin resonance spectroscopy; at 120 °C, the values of the rate coefficients for polystyrene‐BODAZ alkoxyamine dissociation (k_d), combination of BODAZ and propagating radicals (k_c), and the equilibrium constant (K) were 1.60 × 10^?5 s^?1, 5.19 × 10⁶ M^?1 s^?1, and 3.08 × 10^?12 M, respectively. The value of k_d was approximately one and two orders of magnitude lower, and that of K was approximately 20 and 7 times lower than for the NO88Bn and TEMPO adducts. These results are explained in terms of X‐ray crystal structures of BODAZ and NO88Bn; the six‐membered ring of BODAZ deviates significantly from planarity as compared to the planar five‐membered ring of NO88Bn and possesses a benzyl substituent oriented away from the nitroxyl group leading to a seemingly more exposed oxyl group, which resulted in a higher k_c and a lower k_d than NO88Bn. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3892–3900, 2003     

Synthesis of poly(methyl methacrylate)‐b‐polystyrene containing a crown ether unit at the junction point via combination of atom transfer radical polymerization and nitroxide mediated radical polymerization routes

Poly(methyl methacrylate)‐b‐polystyrene (PMMA‐b‐PS) containing a benzo‐15‐crown‐5 unit at the junction point was prepared by combining atom transfer radical polymerization and nitroxide‐mediated radical polymerization. For this purpose, 6,7,9,10,12,13,15,16‐octahydro‐5,8,11,14,17‐pentaoxa‐benzocyclopentadecene‐2‐carboxylic acid 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxycarbonyl]‐propyl ester ( 3 ) was synthesized and used as an initiator in atom transfer radical polymerization of methyl methacrylate in the presence of CuCl and pentamethyldiethylenetriamine at 60°C. A linear behavior was observed in both plots of ln([M]₀/[M]) versus time and M_n,_GPC versus conversion indicating that the polymerization proceeded in a controlled/living manner. Thus obtained PMMA precursor was used as a macroinitiator in nitroxide‐mediated radical polymerization of styrene (St) at 125°C to give well‐defined PMMA‐b‐PS with crown ether per chain. Kinetic data were also obtained for copolymerization. Moreover, potassium picrate (K⁺ picrate) complexation of 3 and PMMA‐b‐PS copolymer was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3242–3249, 2006     

In situ nitroxide‐mediated polymerization of styrene promoted by the N‐tert‐butyl‐α‐isopropylnitrone/bpo pair: ESR investigations

The styrene polymerization initiated by benzoyl peroxide (BPO) in the presence of N‐tert‐butyl‐α‐isopropylnitrone as nitroxide precursor is well‐controlled provided that a prereaction between the nitrone and BPO is carried out in suitable conditions prior to polymerization at a higher temperature. Electron spin resonance (ESR) spectroscopy was implemented to probe the nitroxides formed during both steps, that is, the prereaction and polymerization, and to get crucial information regarding the structure of the nitroxides responsible for the polymerization control. ESR studies combined with first principles calculations have evidenced that nitroxides observed during the prereaction in the presence of styrene and during the polymerization steps consist of a mixture of two macronitroxides. One is formed by the addition of a growing polystyrene chain to the nitrone as would be expected. However, the second one results from the addition of a polystyrene chain to tert‐butyl nitroso that is in situ formed presumably by decomposition of the first macronitroxide type. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

High solids TEMPO‐mediated radical semibatch emulsion polymerization of styrene

A bicomponent initiation system consisting of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and the water soluble initiator potassium persulfate (KPS) was used to develop a robust and versatile semibatch emulsion polymerization process to obtain polystyrene (PS) latexes with solids contents of 5–40 wt %. A window of operating conditions was found that yielded high conversion (>95%) stable latexes and well controlled polymers, overcoming limitations found in previous attempts at developing similar processes using TEMPO. The critical parameters studied were surfactant concentration, monomer concentration in the nucleation step and the monomer feed rate in the semibatch step. Methyl acrylate (MA) was used in the nucleation step to improve the nitroxide efficiency (N_Eff). Latexes having molecular weight distribution (MWD) with dispersity (?) lower than 1.5, average particle size (D_p) from ≈32 to ≈500 nm, nitroxide efficiencies N_Eff up to ≈1.0 and monomer conversions >90% were obtained in less than 12 h with solids contents up to 40 wt %. These results constitute a significant advance over prior efforts in TEMPO‐mediated polymerization in aqueous dispersions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 49–62     

2,2,6,6‐Tetramethylpiperydinyl‐1‐oxyl (TEMPO) Functionalized Benzoxazines Prepared with a One‐Pot Synthesis for Reactive/Crosslinkable Initiators of Nitroxide Mediated Polymerization

In this work, the incorporation of a 2,2,6,6‐tetramethylpiperydinyl‐1‐oxyl (TEMPO) group to a benzoxazine ring is performed using a one‐pot synthesis for the preparation of TEMPO‐functionalized benzoxazine compounds and polymers as reactive and crosslinkable initiators for nitroxide‐mediated polymerization (NMP). The TEMPO‐functionalization reaction of benzoxazine, traced with ¹H NMR, is conducted with sequential radical transfer and coupling reactions. Moreover, polystyrene‐grafted polybenzoxazine copolymers are prepared with the TEMPO‐benzoxazine initiator and NMP of styrene. The polymerization system exhibits the characteristics of controlled radical polymerization, including controlled molecular weights of products and ability for sequential polymerization. Moreover, based on the chemical reactivity and crosslinking ability of benzoxazine groups, the synthesis route developed in this work will widen the scope of the design and synthesis of functional and high‐performance polymers.

     

Synthesis and asymmetric anionic polymerization of substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides

Substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy substituent at the para‐position (p‐OMe, 2a ) or an electron‐withdrawing chloro one at the para‐ (p‐Cl, 2b ), meta‐ (m‐Cl, 2c ) , and ortho‐positions (o‐Cl, 2d ) of the benzene ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative specific rotation were obtained for all of four monomers, and the polymer obtained from 2a showed smaller specific rotation value than that of polymer having no substituent (p‐H, 1 ) on the phenyl group and the polymers obtained from 2b–d showed larger ones. It was found that the kind of a substituent and its substitution position on the phenyl group affect significantly the optical activity of polymers. The largest specific rotation value of [α]₄₃₅= ?153.2° was obtained in the polymerization of 2d with an ortho‐chloro substituent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 437–444     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

Synthesis of soluble single‐walled carbon nanotubes with poly (1,3‐cyclohexadiene): Grafting poly(1,3‐cyclohexadienyl)lithium onto a solid surface

The first‐ever grafting of poly(1,3‐cyclohexadiene) (PCHD) onto single‐walled carbon nanotubes (SWNTs) was accomplished by reaction with poly(1,3‐cyclohexadienyl)lithium. The rate of this reaction was especially slow due to the heterogeneous nature of the reaction system. The concentration of active carbons available for reaction with PCHDLi on the solid surface of the SWNTs was found to be approximately 2.0 mol %. The mass of PCHD attached to the SWNTs was effectively controlled by varying the molecular weight of the PCHD. The resulting PCHD‐grafted SWNTs exhibited excellent solubility in organic solvent, maintaining a highly stable homogeneous dispersion even after 3 months. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

Synthesis of polymeric microspheres from a Merrifield resin by surface‐initiated nitroxide‐mediated radical polymerization

Polymeric microspheres were prepared from a Merrifield resin via nitroxide‐mediated radical polymerization. Polystyrene, poly(acetoxystyrene), and poly[styrene‐b‐(methyl methacrylate‐co‐styrene)], poly(acetoxystyrene‐b‐styrene), and poly(styrene‐co‐2‐hydroxyethyl methacrylate) copolymers were demonstrated to graft onto 2,2,6,6‐tetramethyl‐1‐piperidinyloxy nitroxide bound Merrifield resins. The polymerization control was enhanced both on the surface and in solution by the addition of sacrificial nitroxide. The significant increase in the particle diameter (more than a fivefold volume increase for polystyrene brushes) showed that polymer growth was not only on the surface but also within the particles, and this diameter increase could be adjusted through changes in the molecular weight of the polymers. The microspheres were characterized by elemental analysis, IR spectroscopy, particle size analysis, and optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2145–2154, 2005     

Improving the control of styrene polymerization at 60 °C using a dialkylated α‐hydrogenated nitroxide

A new dialkylated α‐hydrogenated linear nitroxide and the corresponding 1‐phenylethyl alkoxyamine were synthesized in two and three steps, respectively. The alkoxyamine was involved in the polymerization of styrene at 60 °C, and the in situ concentration of nitroxide was monitored by electron spin resonance spectroscopy. The enhanced characteristics of these new alkylated alkoxyamine and nitroxide (k = 1.5 × 10^?4 s^?1 and k = 5.7 × 10⁴ L mol^?1 s^?1) yielded a monomer consumption one order of magnitude higher than styrene thermal polymerization. This resulted in well‐defined polystyrenes up to 70,000 g mol^?1 and the observation of a control occurring through the establishment of the radical persistent effect, that is, ln([M]₀/[M]) = t^2/3. Experimentally determined kinetic constants were involved in PREDICI modelings to investigate the influence of temperature and initial alkoxyamine concentration on the kinetics as well as on the livingness and the controlled character of the polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012