Antibacterial metal implant with a TiO2‐conferred photocatalytic bactericidal effect against Staphylococcus aureus

Photocatalysis with anatase Titanium dioxide (TiO₂) under ultraviolet A (UVA) has a well recognized bactericidal effect. There have been a few reports, however, on the effects of photocatalysis on bio‐implant‐related infections. The purpose of present study was to evaluate the photocatalytic bactericidal effects of anatase TiO₂ on Staphylococcus aureus (S. aureus) associated with surgical site infections. TiO₂ films were synthesized on commercially pure titanium substrates and SUS316 stainless steel using a plasma source ion implantation method followed by annealing. The chemical composition of the surface layers was determined using GXRD and XPS. The disks were seeded with cultured S. aureus and exposed to UVA illumination from black light. The bactericidal effect of the TiO₂ films was evaluated by counting the survived colonies statistically. A structural gradient anatase type TiO₂ layer formed on all substrates. The viability of the bacteria on the photocatalytic TiO₂ film coated on titanium was suppressed to 7.0% at 30 minutes and 5.5% at 45 minutes, whereas that on a similarly coated stainless steel was suppressed to 45.8% at 30 minute and 28.6% at 45 minutes (ANOVA: p < 0.05). Complete bacterial inactivation was achieved after 90 minutes on titanium and after 60 minutes on stainless steel. The photocatalytic bactericidal effect of TiO₂ is useful for sterilizing the contaminated surfaces of bioimplants. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of monodisperse TiO2 nanoparticles with the size of 8–10 nm in dye-sensitized solar cells

In this paper, the commercial monodisperse TiO₂ nanoparticles with the size of 8–10 nm were successfully applied to the photoelectrode for dye-sensitized solar cells (DSCs) and the influence of the thickness of the TiO₂ thin films on the photovoltaic performance of the DSCs was investigated. The result revealed that the DSCs with the TiO₂ thin film thickness of 3.6, 8.0, 11.6 and 20.0 μm gave the photoelectric conversion efficiency of 3.67%, 5.92%, 6.71% and 7.03%, respectively, under the illumination of simulated AM 1.5 sunlight (100 mW cm⁻²).     

Sol–gel derived silver-incorporated titania thin films on glass: bactericidal and photocatalytic activity

Titanium dioxide (TiO₂) and silver-containing TiO₂ (Ag-TiO₂) thin films were prepared on silica pre-coated float glass substrates by a sol–gel spin coating method. The bactericidal activity of the films was determined against Staphylococcus epidermidis under natural and ultraviolet (UV) illumination by four complementary methods; (1) the disk diffusion assay, (2) UV-induced bactericidal test, (3) qualitative Ag ion release in bacteria inoculated agar media and (4) surface topographical examination by laserscan profilometry. Photocatalytic activity of the films was measured through the degradation of stearic acid under UV, solar and visible light conditions. The chemical state and distribution of Ag nanoparticles, as well as the structure of the TiO₂ matrix, and hence the bactericidal and photocatalytic activity, is controlled by post-coating calcination treatment (100–650 °C). Additionally, under any given illumination condition the Ag-incorporated films were found to have superior bactericidal and photocataltyic activity performance compared to TiO₂ thin films. It is shown that with optimized thin film processing parameters, both TiO₂ and Ag-TiO₂ thin films calcined at 450 °C were bactericidal and photocatalytically active.     

The Role of Order in the Amplification of Light‐Energy Conversion in a Dye‐Sensitized Solar Cell Coupled to a Photonic Crystal

We investigate the cause of amplification of light‐energy conversion when coupling a nc‐TiO₂ film to a TiO₂ inverse opal by comparing it to an inverse TiO₂ glass (i‐TiO₂‐g) fabricated with the exact monodisperse air–hole size as an inverse opal with a stop band at 600 nm (600‐i‐TiO₂‐o). A significant twofold average gain in the photon‐to‐current conversion efficiency is measured to the red of the stop band at the 600‐i‐TiO₂‐o/nc‐TiO₂ bilayer under front‐wall and back‐wall illumination, greater than the gain within the stop band. A smaller amplification is measured under front‐wall illumination—and no gain is measured under back‐wall illumination—for i‐TiO₂‐g/nc‐TiO₂ at these energies. The photonic crystal therefore causes trapping of light through the bilayer, not only within the gap but also to the red, at frequencies within its dielectric band. This light‐trapping effect is found to be dependent on structural order, as a highly disordered inverse glass film with the same air–hole size and thickness does not yield the same gain. A drop in the transmission of light is measured within the same frequencies to the red of the stop band upon adding nc‐TiO₂ to 600‐i‐TiO₂‐o, consistent with light trapping in the bilayer.     

Photocatalytic Efficiency Tuning by the Surface Roughness of TiO2 Coatings on Glass Prepared by the Doctor Blade Method

A set of opaque films were prepared with Degussa P25^® or Hombikat UV100^® TiO₂ powders by the doctor blade method on glass slides with different compositions of polyethylene glycol of 20 kDa (PEG20), and they were characterized by spectroscopy, microscopy and photochemical kinetics measurements. After annealing treatment at 450 °C, about 5–7% C atom was incorporated into the films, as a consequence of the degradation of the organic complexing agents, inducing a small reduction of the energy band gap of TiO₂ (i.e. 3.02 ≤ E_g (eV) ≤ 3.08). All films were about 15 ± 2 μm thick but their micro‐morphological characteristics depended on the content of PEG20, showing different patterns of cracks and aggregates that produce intense light scattering and retransmission phenomena with the result of a three‐dimensional excitation of the TiO₂ particles in the thick film. Back‐face excitation with UVA light (365 ± 42 nm) of the opaque films in contact with an aqueous solution produced both surface‐bound and free hydroxyl radicals (HO^?), as detected using a coumarin solution as a radical dosimeter. The photogeneration efficiency of HO^? decreased with the surface roughness of the films, which varied between 135 and 439 nm depending on the film's composition.     

TiCl4 assisted formation of nano-TiO2 secondary structure in photoactive electrodes for high efficiency dye-sensitized solar cells

A new kind of photoactive electrodes with nanocrystalline TiO2(nano-TiO2)secondary structure is successfully prepared via a simple method of adding a small amount of TiCl4 2-propanol solution in conventional nano-TiO2 paste to form micro-sized nano-TiO2 aggregates.The benefits of this special structure include improved optical absorption,increased light scattering ability,and enhanced electron transport and collection efficiency.Dye-sensitized solar cells(DSCs)based on these photoactive electrodes show improved performance.The power conversion efficiency of the cells can be increased from 5.03%to 7.30%by substituting 6μm conventional nano-TiO2 thin film with the same thickness of as-prepared nano-TiO2 aggregates film in the photoactive electrodes.A higher power conversion efficiency of the cells can be obtained by further increasing the thickness of the nano-TiO2 aggregates film.     

TiO2@CdS core–shell nanorods films: Fabrication and dramatically enhanced photoelectrochemical properties

In this paper, we prepared TiO₂@CdS core–shell nanorods films electrodes using a simple and low-cost chemical bath deposition method. The core–shell nanorods films electrodes were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV–vis spectrometry techniques. After applying these TiO₂@CdS core–shell nanorods electrodes in photovoltaic cells, we found that the photocurrent was dramatically enhanced, comparing with those of bare TiO₂ nanorods and CdS films electrodes. Moreover, TiO₂@CdS core–shell nanorods film electrode showed better cell performance than CdS nanoparticles deposited TiO₂ nanoparticles (P25) film electrode. A photocurrent of 1.31 mA/cm², a fill factor of 0.43, an open circuit photovoltage of 0.44 V, and a conversion efficiency of 0.8% were obtained under an illumination of 32 mW/cm², when the CdS nanoparticles deposited on TiO₂ nanorods film for about 20 min. The maximum quantum efficiency of 5.0% was obtained at an incident wavelength of 500 nm. We believe that TiO₂@CdS core–shell heterostructured nanorods are excellent candidates for studying some fundamental aspects on charge separation and transfer in the fields of photovoltaic cells and photocatalysis.     

Effect of calcination temperature on the microstructure of porous TiO<Subscript>2</Subscript> film

To obtain porous TiO₂ film, the precursor sol was prepared by hydrolysis of Ti isopropoxide and then complexed with trehalose dihydrate. The porous TiO₂ film was fabricated by the dip-coating technique on glass substrates using this solution. The TiO₂ film was calcined at 500 °C. The maximum thickness of the film from one-run dip-coating was ca. 740 nm. The film was composed of nanosized particle and pores. The porosity of the TiO₂ film was increased by addition of trehalose dihydrate to the sol. The porous TiO₂ films were calcined at different temperatures. The effects of calcination temperature on the microstructure of the porous TiO₂ film were investigated. The porous film prepared from sol containing trehalose still kept the porous structure after calcination at 950 °C. The phase transition temperature of the film from anatase to rutile was shifted from 650 to 700 °C by addition of trehalose to the sol.     

Simultaneous Irradiation with Different Wavelengths of Ultraviolet Light has Synergistic Bactericidal Effect on Vibrio parahaemolyticus

Ultraviolet (UV) irradiation is an increasingly used method of water disinfection. UV rays can be classified by wavelength into UVA (320–400 nm), UVB (280‐320 nm), and UVC (<280 nm). We previously developed UVA sterilization equipment with a UVA light‐emitting diode (LED). The aim of this study was to establish a new water disinfection procedure using the combined irradiation of the UVA‐LED and another UV wavelength. An oxidative DNA product, 8‐hydroxy‐2’‐deoxyguanosine (8‐OHdG), increased after irradiation by UVA‐LED alone, and the level of cyclobutane pyrimidine dimers (CPDs) was increased by UVC alone in Vibrio parahaemolyticus. Although sequential irradiation of UVA‐LED and UVC‐induced additional bactericidal effects, simultaneous irradiation with UVA‐LED and UVC‐induced bactericidal synergistic effects. The 8‐OHdG and CPDs production showed no differences between sequential and simultaneous irradiation. Interestingly, the recovery of CPDs was delayed by simultaneous irradiation. The synergistic effect was absent in SOS response‐deficient mutants, such as the recA and lexA strains. Because recA‐ and lexA‐mediated SOS responses have crucial roles in a DNA repair pathway, the synergistic bactericidal effect produced by the simultaneous irradiation could depend on the suppression of the CPDs repair. The simultaneous irradiation of UVA‐LED and UVC is a candidate new procedure for effective water disinfection.     

Fabrication of self-organized TiO2 nanotubes from columnar titanium thin films sputtered on semiconductor surfaces

Self-organized nanotube arrays of TiO₂ have been grown from titanium (Ti) thin films deposited on p-type Si(1 0 0) substrates. Structural and morphological characterizations carried out by X-ray diffraction and scanning electron microcopy indicate that the sputtered crystalline Ti thin films used for subsequent anodization are hexagonally closed packed (hcp-Ti) and show a columnar morphology. Electrochemical anodization of the Ti films was carried out by potentiostatic experiments in 1 M H₃PO₄ + 1 M NaOH + 0.5 wt% HF electrolyte at room temperature. The TiO₂ nanotubes on a semiconductor substrate have an average tube length of approximately 560 nm, diameter in the order of 80 nm and wall thickness approximately 20 nm.     

Bactericidal effect of an energy storage TiO2–WO3 photocatalyst in dark

TiO₂–WO₃ composite photocatalyst films can be charged with reductive energy by irradiation with ultraviolet (UV) light. The photo-charged film exhibited a moderate bactericidal effect on Escherichia coli during 6-h exposure in dark. On the other hand, the pre-discharged film exhibited no significant bactericidal effect. The moderate bactericidal effect may restrain bacteria from increasing during the night, and the survived bacteria may be killed by TiO₂ due to its strong bactericidal effect in the next day. The photo-charged film generated H₂O₂ by reducing oxygen. The bactericidal effect of the photo-charged film was close to that of H₂O₂ of the generated amount. Thus, the bactericidal effect of the photo-charged TiO₂–WO₃ film can be explained chiefly in terms of the generated H₂O₂.     

A novel architecture of poly(tetrafluoroethylene)-framed TiO2 electrodes for dye-sensitized solar cells

A novel architecture of polytetrafluoroethylene (PTFE)-framed TiO₂ electrodes is developed for dye-sensitized solar cells. The PTFE-framed TiO₂ electrodes with various thicknesses have been successfully fabricated, ranging from 20 to 160 μm. The optimal energy conversion efficiency of 9.04% is achieved with a film thickness of 60 μm. The PTFE-framed structure not only provides tunable film thickness but a reliable and cost-effective way for the mass production of photo-electrodes.     

Anomalous lithium ion diffusion into CeO2·TiO2 thin film by film thickness variations

CeO₂·TiO₂ thin film is considered as an excellent candidate for a passive ion storage layer due to its good electrochemical stability and comparatively great charge capacitance. When cerium-titanium oxide thin film is adopted as an ion storage layer against cathodic tungsten oxide layer, the electrochromic device shows long term durability and cyclability. Therefore, many researchers investigated the composition and crystallinity effects to the charge density. In our study, we prepared CeO₂·TiO₂ thin by sol–gel dip-coating method, varying thickness by controlling withdrawal speeds. As investigating results of cyclic voltammetry and chronocoulometry, we found that there are three regions in the film thicknesses: (1) fast lithium ion diffusion region under 100 nm, (2) slow diffusion region in the range of 100 to 150 nm, and (3) fast and great charge capacitance region over 150 nm. In region 1, lithium ions diffuse very fast and reach into indium-tin oxide (ITO) layers, and slow diffusion region follows in region 2, probably due to the remains or impurities within the film, and in region 3, lithium ion diffusion gets fast again, accompanied with charge capacitance increase with thickness.     

Improved Efficiency and Stability of Flexible Dye Sensitized Solar Cells on ITO/PEN Substrates Using an Ionic Liquid Electrolyte

Flexible dye‐sensitized solar cells (DSSCs) built on plastic substrates have attracted great interest as they are lightweight and can be roll‐to‐roll printed to accelerate production and reduce cost. However, plastic substrates such as PEN and PET are permeable to water, oxygen and volatile electrolyte solvents, which is detrimental to the cell stability. Therefore, to address this problem, in this work, an ionic liquid (IL) electrolyte is used to replace the volatile solvent electrolyte. The initial IL‐based devices only achieved around 50% of the photovoltaic conversion efficiency of the cells using the solvent electrolyte. Current‐voltage and electrochemical impedance spectroscopy (EIS) analysis of the cells in the dark indicated that this lower efficiency mainly originated from (i) a lack of blocking layer to reduce recombination, and (ii) a lower charge collection efficiency. To combat these problems, cells were developed using a 12 nm thick blocking layer, produced by atomic layer deposition, and 1 μm thick P25 TiO₂ film sensitized with the hydrophobic MK‐2 dye. These flexible DSSCs utilizing an IL electrolyte exhibit significantly improved efficiencies and a <10% drop in performance after 1000 h aging at 60°C under continuous light illumination.     

Effects of electron beam irradiation on the photoelectrochemical properties of TiO2 film for DSSCs

TiO₂ has been widely utilized for various industrial applications such as photochemical cells, photocatalysts, and electrochromic devices. The crystallinity and morphology of TiO₂ films play a significant role in determining the overall efficiency of dye-sensitized solar cells (DSSCs). In this study, the preparation of nanostructured TiO₂ films by electron beam irradiation and their characterization were investigated for the application of DSSCs. TiO₂ films were exposed to 20–100 kGy of electron beam irradiation using 1.14 MeV energy acceleration with a 7.46 mA beam current and 10 kGy/pass dose rates. These samples were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and X-ray photoelectron spectroscopy (XPS) analysis. After irradiation, each TiO₂ film was tested as a DSSC. At low doses of electron beam irradiation (20 kGy), the energy conversion efficiency of the film was approximately 4.0% under illumination of simulated sunlight with AM 1.5 G (100 mW/cm²). We found that electron beam irradiation resulted in surface modification of the TiO₂ films, which could explain the observed increase in the conversion efficiency in irradiated versus non-irradiated films.     

Improvement of dye-sensitized solar cell performance through electrodepositing a close-packed TiO2 film

A simple electrodepositing method was proposed for fabricating a uniform, tight, and close-packed TiO₂ nanocrystalline film on the ITO substrate. The electrode and dye-sensitized solar cell (DSSC) with electrodeposited TiO₂ layer were characterized by scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The phthalocyanin dye, zinc tetra-carboxyl phthalocyanin complex, was used as a model dye to evaluate the influence of close-packed TiO₂ blocking layer on the photocurrent–voltage property. On the electrodeposition, the close-packed TiO₂ layer could effectively inhibit the recombination of charges, and therefore improve the performances of the corresponding cells. The effects of film thickness on light transmittance and photocurrent density of the corresponding cell were also demonstrated. The optimum film thickness was found to be approximately 400 nm. At the optimum thickness, the photocurrent density greatly increased comparing with that of the screen printing TiO₂ film. These results imply that our proposition was a potential and feasible method for the fabrication of DSSC practically.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Effect of optical property of surfactant-treated TiO2 nanostructure on the performance of TiO2 photo-electrochemical cell

TiO₂ nanostructures have been treated using different kind of surfactant to modify its optical absorption and morphology. TiO₂ nanostructures were prepared via simple method on indium tin oxide (ITO) surface, namely, liquid-phase deposition technique (LPD) at 50°C. The TiO₂ nanostructures film with a thickness of about 236 nm was annealed at 400°C for 1 h in the air to enhance the interconnectivity of the particles. The dense and compact TiO₂ nanoparticle with different shape, particle size and surface morphology was used as a photovoltaic material in a photo-electrochemical cell of ITO/TiO₂/electrolyte/platinum. TiO₂ nanostructure films were treated with three different kinds of surfactants: cetyltrimethylammonium bromide (CTAB), hexamethylenetetramine (HMT) and polyvinylpyrrolidone (PVP). It was found that the film treated with HMT performed best, with a J _sc of 57.5 μA/cm². In conclusion, optical absorption, band gap and grain size of TiO₂ nanostructure influenced the performance of the cell.     

Study on growth rate of TiO2 nanostructured thin films: simulation by molecular dynamics approach and modeling by artificial neural network

Effects of the deposition process parameters on the thickness of TiO₂ nanostructured film were simulated using the molecular dynamics (MD) approach and modeled by the artificial neural network (ANN) and regression method. Accordingly, TiO₂ nanostructured film was prepared experimentally with the sol–gel dip‐coating method. Structural instabilities can be expected, due to short‐ and/or long‐range intermolecular forces, leading to the surface inhomogeneities. In the MD simulation, the Morse potential function was used for the inter‐atomic interactions, and equations of motion for atoms were solved by Verlet algorithm. The effect of the withdrawal velocity, drying temperature and number of deposited layers were studied in order to characterize the film thickness. The results of MD simulations are reasonably consistent with atomic force microscopy, scanning electron microscopy and Dektak surface profiler. Finally, the outputs from experimental data were analyzed by using the ANN in order to investigate the effects of deposition process parameters on the film thickness. In this case, various architectures have been checked using 75% of experimental data for training of the ANN. Among the various architectures, feed‐forward back‐propagation network with trainer training algorithm was found as the best architecture. Based on the R‐squared value, the ANN is better than the regression model in predicting the film thickness. The statistical analysis for those results was then used to verify the fitness of the complex process model. Based on the results, this modeling methodology can explain the characteristics of the TiO₂ nanostructured thin film and growth mechanism varying with process conditions. © 2013 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd.     

Doping level effect on visible-light irradiation W-doped TiO2–anatase photocatalysts for Congo red photodegradation

A series of W-modified TiO₂ (W–TiO₂) photocatalysts were synthesized by a simple sol–gel method. The new photocatalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis-diffuse reflectance spectroscopy (DRS), and Brunauer, Emmett and Teller (BET) surface area analyzer. The photoactivity of the W–TiO₂ photocatalysts was evaluated by the photocatalytic oxidation of Congo red (CR) dye. It was found that the average size of the prepared photocatalysts is 10 nm. Moreover, they have high surface areas (∼ 216 m² g⁻¹) and their light-absorption extends to the visible region compared to pure TiO₂. The effects of W-loading and of the calcination temperature of the prepared photocatalysts on their photocatalytic activity were also studied. The obtained results show that the W_0.5–TiO₂ photocatalyst calcined at 350 °C is much highly photoactive than non-doped or highly doped TiO₂. The enhanced photocatalytic activity of the weakly doped TiO₂ may be attributed to the increase in the charge separation efficiency and the presence of surface acidity on the W_0.5–TiO₂ photocatalyst.