Studies of Partial Molar Volumes of Alkylamines in Non-electrolyte Solvents. IV. Alkyl Amines in Cyclic Ethers at 303.15 K

Apparent molar volumes V _φ,B of n-propylamine, n-butylamine, di-n-propylamine, di-n-butylamine, triethylamine, tri-n-propylamine, and tri-n-butylamine in 1,4-dioxane and in oxolane (tetrahydrofuran) have been determined at 303.15 K using a high-precision Anton Paar vibrating-tube densimeter (model DMA 60/602). The limiting partial molar volumes and limiting excess partial molar volumes are analyzed and interpreted in terms of solute-solvent interactions and structural effects of the molecules. Analyses were made of the contributions of specific interactions to the partial molar volumes of these primary, secondary and tertiary amines in 1,4-dioxane and oxolane using the Terasawa model, scaled particle theory (SPT) and hard-sphere theory (HST). The ERAS model has also been applied to estimate the apparent molar volumes and excess apparent molar volumes of alkylamine solutions in 1,4-dioxane and oxolane.     

Volumetric Properties of Binary Mixtures of the Ionic Liquid 1-Butyl-3-Methylimidazolium Tetrafluoroborate with Aniline

The densities of binary mixtures of an ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF₄], with an aromatic compound, aniline, have been determined over the full range of compositions and over the temperature range 298.15 to 313.15 K at atmospheric pressure using a vibrating-tube densimeter (DMA4500). Excess molar volumes ( V_m^EV_{\mathrm{m}}^{\mathrm{E}} ) have been obtained from these experimental results, and were fitted by the fourth-order Redlich–Kister equation. In addition, partial molar volumes, apparent molar volumes and partial molar volumes at infinite dilution have been calculated for each component. Our results show that values of V_m^EV_{\mathrm{m}}^{\mathrm{E}} decrease slightly when the temperature increases in this system. The results have been interpreted in terms of ion-dipole interactions and structural factors of the ionic liquid and the organic molecular liquid.     

Thermochemistry of 2-Aminopyridine (C<Subscript>5</Subscript>H<Subscript>6</Subscript>N<Subscript>2</Subscript>)(s)

The molar enthalpies of solution of 2-aminopyridine at various molalities were measured at T=298.15 K in double-distilled water by means of an isoperibol solution-reaction calorimeter. According to Pitzer’s theory, the molar enthalpy of solution of the title compound at infinite dilution was calculated to be D_solH_m^￥ = 14.34 kJ·mol^-1\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\infty} = 14.34~\mbox{kJ}\cdot\mbox{mol}^{-1}, and Pitzer’s ion interaction parameters b_MX^(0)L, b_MX^(1)L\beta_{\mathrm{MX}}^{(0)L}, \beta_{\mathrm{MX}}^{(1)L}, and C_MX^fLC_{\mathrm{MX}}^{\phi L} were obtained. Values of the relative apparent molar enthalpies ( ^φ L) and relative partial molar enthalpies of the compound ([`(L)]₂)\bar{L}_{2}) were derived from the experimental enthalpies of solution of the compound. The standard molar enthalpy of formation of the cation C₅H₇N₂ ⁺\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{ +} in aqueous solution was calculated to be D_fH_m^o(C₅H₇N₂⁺,aq)=-(2.096±0.801) kJ·mol^-1\Delta_{\mathrm{f}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{+},\mbox{aq})=-(2.096\pm 0.801)~\mbox{kJ}\cdot\mbox{mol}^{-1}.     

The Influence of Ionic Strength on Yttrium and Rare Earth Element Complexation by Fluoride Ions in NaClO<Subscript>4</Subscript>, NaNO<Subscript>3</Subscript> and NaCl Solutions at 25 °C

Stability constants of the form _F β ₁(M)=[MF²⁺][M³⁺]⁻¹[F⁻]⁻¹ (where [MF²⁺] represents the concentration of a yttrium or a rare earth element (YREE) complex, [M³⁺] is the free YREE ion concentration, and [F⁻] is the free fluoride ion concentration) were determined by direct potentiometry in NaNO₃ and NaCl solutions. The patterns of log_{10  F} β ₁(M) in NaNO₃ and NaCl solutions very closely resemble stability constant patterns obtained previously in NaClO₄. For a given YREE, stability constants obtained in NaClO₄ were similar to, but consistently larger than _F β ₁(M) values obtained in NaNO₃ which, in turn, were larger than formation constants obtained in NaCl. Stability constants for formation of nitrate and chloride complexes ( and _Cl β ₁(M)=[MCl²⁺][M³⁺]⁻¹[Cl⁻]⁻¹) derived from _F β ₁(M) data exhibited ionic strength dependencies generally similar to those of _F β ₁(M). However, in contrast to the somewhat complex pattern obtained for _F β ₁(M) across the fifteen member YREE series, no patterns were observed for nitrate and chloride complexation constants: neither nor _Cl β ₁(M) showed discernable variations across the suite of YREEs. Nitrate and chloride formation constants at 25 °C and zero ionic strength were estimated as log₁₀  and log_{10  Cl} β ₁^o(M)=0.71±0.05. Although these constants are identical within experimental uncertainty, the distinct ionic strength dependencies of and _Cl β ₁(M) produced larger differences in the two stability constants with increasing ionic strength whereby _Cl β ₁(M) was uniformly larger than .     

First and second thermodynamic mixing functions of ethylbenzene+n-nonane, +n-decane,and+n-dodecane at 25 and 45°C

Isothermal compressibilities _T and isobaric thermal expansion coefficients _p have been determined for mixtures of ethylbenzene+n-nonane, +n-decane, and +n-dodecane at 25 and 45°C in the whole range of composition. The excess functions and have been obtained at each measured mole fraction. The first one is zero for ethylbenzene +n-nonane, positive for ethylbenzene +n-decane, and +n-dodecane and increases with chain length n of the n-alkane. The function is positive for the three studied systems and nearly constant with n. Both mixing functions increase slightly with temperature. From this measurement and supplementary literature data of molar heat capacities at constant pressure C _P , the isentropic compressibilities _S, the molar heat capacities at constant volume C _V and the corresponding mixing functions have been calculated at 25°C. Furthermore, the pressure dependence of excess enthalpy H ^B , at zero pressure and at 25°C has been obtained from our experimental results of and experimental literature values for excess volume V ^E .     

The Examination of the Activity Coefficients of Cu(II) Complexes with OH<Superscript>−</Superscript> and Cl<Superscript>−</Superscript> in NaClO<Subscript>4</Subscript> Using Pitzer Equations: Application to Other Divalent Cations

The stability constants for the hydrolysis of Cu(II) and formation of chloride complexes in NaClO₄ solution, at 25 °C, have been examined using the Pitzer equations. The calculated activity coefficients of CuOH⁺, Cu(OH)₂, Cu₂(OH)³⁺, Cu₂(OH)₂²⁺, CuCl⁺ and CuCl₂ have been used to determine the Pitzer parameter (β _i ⁽⁰⁾, β _i ⁽¹⁾, and C _i ) for these complexes. These parameters yield values for the hydrolysis constants (log ₁₀ β ₁^*, log ₁₀ β ₂^*, log ₁₀ β _2,1^* and log ₁₀ β _2,2^*) and the formation of the chloride complexes (log ₁₀ β _CuCl^* and that agree with the experimental measurements, respectively to ±0.01,±0.02,±0.03,±0.06,±0.03 and ±0.07. The stability constants for the hydrolysis and chloride complexes of Cu(II) were found to be related to those of other divalent metals over a wide range of ionic strength. This has allowed us to use the calculated Pitzer parameters for copper complexes to model the stability constants and activity coefficients of hydroxide and chloride complexes of other divalent metals. The applicability of the Pitzer Cu(II) model to the ionic strength dependence of hydrolysis of zinc and cadmium is presented. The resulting thermodynamic hydroxide and chloride constants for zinc are and . For cadmium the thermodynamic hydrolysis constants are and . The Cu(II) model allows one to determine the stability of other divalent metal complexes over a wide range of concentration when little experimental data are available. More reliable stepwise stability constants for divalent metals are needed to test the linearity found for the chloro complexes.     

Solubility of Oxygen in Some 1-1, 2-1, 1-2, and 2-2 Electrolytes as a Function of Concentration at 25°C

The solubility of oxygen has been measured in a number of electrolytes [(LiCl, KCl, RbCl, CsCl, NaF, NaBr, NaI, NaNO₃, KBr, KI, KNO₃, CaCl₂, SrCl₂, BaCl₂, Li₂SO₄, K₂SO₄, Mn(NO₃)₃)] as a function of concentration at 25°C. The solubilities, mol (kg-H₂O)^–1, have been fitted to a function of the molality m (standard deviation < 3mol-kg^–1)

Excess Molar Volumes, Excess Viscosities and Ultrasonic Speeds of Sound of Binary Mixtures of 1,2-Dimethoxyethane with Some Aromatic Liquids at 298.15 K

Densities, viscosities and ultrasonic speeds of sound for binary mixtures of 1,2-dimethoxyethane (DME) with benzene, toluene, chlorobenzene, benzyl chloride, benzaldehyde, nitrobenzene, and aniline are reported over the entire composition range at ambient pressure and temperature (i.e., T=298.15 K and p=1.01×10⁵ Pa). These experimental data were utilized to derive the excess molar volumes (V_m^EV_{\mathrm{m}}^{\mathrm{E}}), excess viscosities (η ^E), and various acoustic parameters including the deviation in isentropic compressibility (Δκ _S ), internal pressure (π _I), and excess enthalpy (H ^E). From the excess molar volumes (V_m^EV_{\mathrm{m}}^{\mathrm{E}}), the excess partial molar volumes ([`(V)]<sub>m,1</sub><sup>E</sup>\overline{V}_{\mathrm{m},1}^{\mathrm{E}} and [`(V)]_m,2^E\overline{V}_{\mathrm{m},2}^{\mathrm{E}}) and excess partial molar volumes at infinite dilution ([`(V)]<sub>m,1</sub><sup>0,E</sup>\overline{V}_{\mathrm{m},1}^{0,\mathrm{E}} and [`(V)]_m,2^0,E\overline{V}_{\mathrm{m},2}^{0,\mathrm{E}}) were derived and discussed for each liquid component in the mixtures. The excess/deviation properties were found to be either negative or positive, depending on the molecular interactions and the nature of the liquid mixtures.     

Volumetric Properties of Binary Mixtures of Acetonitrile and Chloroalkanes at 25°C and Atmospheric Pressure

Excess molar volumes for binary mixtures of acetonitrile + dichloromethane, acetonitrile + trichloromethane, and acetonitrile + tetracloromethane at 25°C have been used to calculate partial molar volumes , excess partial molar volumes , and apparent molar volumes of each component as a function of composition. The V _m ^Evalues are negative over the entire composition range for the systems studied. The applicability of the Prigogine–Flory–Patterson theory was explored. The agreement between theoretical and experimental results is satisfactory for the systems with dichloromethane and tetrachloromethane. For the unsymmetrical behavior of the system with trichloromethane, however, the agreement is poor.     

Thermophysical and Spectroscopic Studies of Pure 1-Butyl-3-methylimidazolium Tetrafluoroborate and Its Aqueous Mixtures

Intermolecular interactions in the aqueous mixtures of the room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), have been studied. The thermophysical properties: density ρ, speed of sound u, specific conductivity κ and refractive index n _D have been measured over the whole composition range at different temperatures (293.15–323.15 K) and are discussed. The results from thermophysical measurements are explained with the help of spectroscopy. In order to interpret the nature of molecular interactions occurring between [BMIM][BF₄] and water molecules, as well as to identify the moieties in which interactions are taking place, ¹H, ¹³C NMR and FT-IR spectra of the solutions have been studied. Excess molar volume V ^E, excess molar isentropic compressibility $ K_{S}^{\text{E}} $ , partial molar excess volume $ V_{i}^{\text{E}} $ , partial molar excess isentropic compressibility $ K_{S,i}^{\text{E}} $ , deviation in specific conductivity ?κ, and deviation in refractive index ?R have also been determined and analyzed to have a better understanding of the interactions taking place between the different components. Additionally, the excess ultrasonic speed u ^E and excess isentropic compressibility $ k_{S}^{\text{E}} $ , in terms of volume fractions, have been calculated and analyzed. It has been observed that temperature has a significant effect on the thermophysical properties of the studied system. Spectroscopic measurements confirm the disruption of ion-pair interactions of [BMIM][BF₄] and hydrogen-bonded network of water in the aqueous mixture of [BMIM][BF₄].     

Densities and Volumetric Properties of Binary Mixtures of Formamide with 1-Butanol, 2-Butanol, 1,3-Butanediol and 1,4-Butanediol at Temperatures between 293.15 and 318.15 K

The densities of binary mixtures of formamide (FA) with 1-butanol, 2-butanol, 1,3-butanediol, and 1,4-butanediol, including those of the pure liquids, over the entire composition range were measured at temperatures (293.15, 298.15, 303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume, V _m ^E, partial molar volumes, and , at infinite dilution, and excess partial molar volumes, and , at infinite dilution were calculated. The variation of these parameters with composition and temperature of the mixtures are discussed in terms of molecular interactions in these mixtures. The partial molar expansivities, and , at infinite dilution and excess partial molar expansivities, and , at infinite dilution were also calculated. The V _m ^E values were found to be positive for all the mixtures at each temperature studied, except for FA + 1-butanol which exhibits a sigmoid trend wherein V _m ^E values change sign from positive to negative as the concentration of FA in the mixture is increased. The V _m ^E values for these mixtures follow the order: 1-butanol < 2-butanol < 1,3-butanediol < 1,4-butanediol. It is observed that the V _m ^E values depend upon the number and position of hydroxyl groups in these alkanol molecules.     

Densities, Specific Heat Capacities, Apparent and Partial Molar Volumes and Heat Capacities of Glycine in?Aqueous Solutions of Formamide, Acetamide, and?N,N-Dimethylacetamide at T=298.15?K and?Ambient Pressure

Apparent molar volumes (V _2,φ ) and heat capacities (C _p2,φ ) of glycine in known concentrations (1.0, 2.0, 4.0, 6.0, and 8.0 mol⋅kg⁻¹) of aqueous formamide (FM), acetamide (AM), and N,N-dimethylacetamide (DMA) solutions at T=298.15 K have been calculated from relative density and specific heat capacity measurements. These measurements were completed using a vibrating-tube flow densimeter and a Picker flow microcalorimeter, respectively. The concentration dependences of the apparent molar data have been used to calculate standard partial molar properties. The latter values have been combined with previously published standard partial molar volumes and heat capacities for glycine in water to calculate volumes and heat capacities associated with the transfer of glycine from water to the investigated aqueous amide solutions, D[`(V)]<sub>2,tr</sub><sup>o</sup>\Delta\overline{V}_{\mathrm{2,tr}}^{\mathrm{o}} and D[`(C)]_p2,tr^o\Delta\overline{C}_{p\mathrm{2,tr}}^{\mathrm{o}} respectively. Calculated values for D[`(V)]<sub>2,tr</sub><sup>o</sup>\Delta\overline{V}_{\mathrm{2,tr}}^{\mathrm{o}} and D[`(C)]_p2,tr^o\Delta\overline{C}_{p\mathrm{2,tr}}^{\mathrm{o}} are positive for all investigated concentrations of aqueous FM and AM solutions. However, values for D[`(C)]_p2,tr^o\Delta\overline{C}_{p\mathrm{2,tr}}^{\mathrm{o}} associated with aqueous DMA solutions are found to be negative. The reported transfer properties increase with increasing co-solute (amide) concentration. This observation is discussed in terms of solute + co-solute interactions. The transfer properties have also been used to estimate interaction coefficients.     

The Enthalpy of Solution of the Alanine-Based Ionic Liquid [C<Subscript>4</Subscript>mim][Ala]

The molar enthalpies of solution of an alanine-based ionic liquid (IL) [C₄mim][Ala], 1-butyl-3-methylimidazolium alanine, containing various amount of water and various molalities Δ_sol H _m(wc), were measured with a solution-reaction isoperibol calorimeter at (298.15±0.01) K, where wc denotes water content. According to Archer’s method, the standard molar enthalpies of solution of [C₄mim][Ala] containing known amounts of water, D_solH_m^o(wc)\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{wc}) , were obtained. In order to eliminate the effect of the small amount of residual water in the source [C₄mim][Ala], a linear fitting of D_solH_m^o(wc)\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{wc}) against water content was carried out, yielding a good straight line where the intercept is the standard molar enthalpy of solution of anhydrous [C₄mim][Ala], D_solH_m^o(pure IL)=-(61.42±0.08)\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{pure}\ \mathrm{IL})=-(61.42\pm 0.08) kJ⋅mol⁻¹. The hydration enthalpy of the alanine anion [Ala]⁻ was estimated using Glasser’s lattice energy theory.     

Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.     

Solvent Effect on the Enthalpy of Solution and Partial Molar Volume of the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate

Enthalpies of solution and partial molar volumes of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate were determined in 15 solvents of different polarity. Very large differences of the enthalpies of solution (????_sol H _IL=38.9?kJ?mol^?1) and partial molar volumes (??V _IL=43 cm³?mol^?1) are nearly the same as observed for lithium perchlorate solutions. These results clearly indicate that the low values of the macroscopic polarity parameters of [bmim]BF₄ do not correspond with the large differences of the intermolecular interactions in IL solutions. The values of the partial molar volume of the cation, $V_{[\mathrm{bmim}]^{+}}$ , were estimated for the first time. The changes of the partial molar volumes, V _IL, reflect mainly the changes of anion volume, $V_{\mathrm{BF}_{4}^{-}}$ . The rate of the Diels?CAlder reaction of 9,10-dimethylanthracene with maleic anhydride in the [bmim]BF₄ medium was nearly the same as in common molecular solvents.     

Electrochemical Studies on <Emphasis Type="Italic">cis</Emphasis>-[Cr<Superscript>III</Superscript>(bipy)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>]I<Subscript>3</Subscript> (Where bipy Denotes 2,2′-Bipyridine) in Acetonitrile

The molar conductivities (Λ) of solutions of bis(2,2′-bipyridine)bis(thiocyanate)chromium(III) triiodide [Cr^III(bipy)₂(SCN)₂]I₃ (where bipy denotes 2,2′-bipyridine, C₁₀H₈N₂), [ _3^-\mathrm{A}^{+}\mathrm{I}_{3}^{-} ], were measured in acetonitrile (ACN) at the temperatures 294.15, 299.15, and 305.15 K. In addition, cyclic voltammograms (CVs) of [ A⁺I₃^-\mathrm{A}^{+}\mathrm{I}_{3}^{-} ] were recorded on platinum, gold, and glassy carbon working electrodes in ACN, using n-tetrabutylammonium hexafluorophosphate (NBu₄PF₆) as the supporting electrolyte, at scan rates (v) ranging from 0.05 to 0.12 V⋅s⁻¹. Furthermore, electrochemical impedance spectroscopic (EIS) measurements were carried out in the frequency range 50 Hz<f<50 kHz using these three working electrodes. The measured molar conductivities (Λ) demonstrate that [ A⁺I₃^-\mathrm{A}^{+}\mathrm{I}_{3}^{-} ] behaves as uni-univalent electrolyte in ACN over the investigated temperature range. The Λ values were analyzed by means of the Lee-Wheaton conductivity equation in order to estimate the limiting molar conductivities (Λ _o), as well as the thermodynamic association constants (K _A), at each experimental temperature for formation of [A⁺ I₃^-\mathrm{I}_{3}^{-} ] ion-pairs. The limiting ionic conductivities ( l_±^o\lambda_{\pm}^{\mathrm{o}} ), the diffusion coefficients at infinite dilution (D _±), as well as the Stokes’ radii (r _St) were determined for both A⁺ and I₃^-\mathrm{I}_{3}^{-} ions. The thermodynamic parameters for the ionic association process, i.e. the Gibbs energy ( DG_A^o\Delta G_{\mathrm{A}}^{\mathrm{o}} ), enthalpy ( DH_A^o\Delta H_{\mathrm{A}}^{\mathrm{o}} ), and entropy ( DS_A^o\Delta S_{\mathrm{A}}^{\mathrm{o}} ), were also determined. The mobility and diffusivity of the A⁺ ion increase linearly with increasing temperature because the solvent medium becomes less viscous as the temperature increases. The K _A values indicate that significant ion association occurs that is not influenced by temperature changes. The ion-pair formation process is exothermic ( DH_A^o < 0\Delta H_{\mathrm{A}}^{\mathrm{o}}<0 ), leading to the generation of additional entropy ( $\Delta S_{\mathrm{A}}^{\mathrm{o}}>0$\Delta S_{\mathrm{A}}^{\mathrm{o}}>0 ). As a result, the Gibbs energy DG_A^o\Delta G_{\mathrm{A}}^{\mathrm{o}} is negative ( DG_A^o < 0\Delta G_{\mathrm{A}}^{\mathrm{o}}<0 ) and the formation of [A⁺I₃^-][\mathrm{A}^{+}\mathrm{I}_{3}^{-}] becomes favorable. CV studies on [A⁺I₃^-][\mathrm{A}^{+}\mathrm{I}_{3}^{-}] solutions indicated that the redox pair Cr^3+/2+ appears to be quasi-reversible on a glassy carbon electrode but is completely irreversible on platinum and gold electrodes. EIS experiments confirm that, among these three electrodes, the glassy carbon working electrode has the smallest resistance to electron transfer.     

Dynamics of Hydration of Alkylsulfonate Anions in Aqueous Solutions

The ¹⁷O-NMR spin-lattice relaxation times (T ₁) of water molecules in aqueous solutions of n-alkylsulfonate (C₁ to C₆) and arylsulfonic anions were determined as a function of concentration at 298 K. Values of the dynamic hydration number, (S^-) = n_h ^- (t_c^- /t_c⁰ - 1)(\mathrm{S}^{-}) = n_{\mathrm{h}}^{ -} (\tau_{\mathrm{c}}^{-} /\tau_{\mathrm{c}}^{0} - 1), were determined from the concentration dependence of T ₁. The ratios (t_c ^-/t_c⁰\tau_{\mathrm{c}}^{ -}/\tau_{\mathrm{c}}^{0}) of the rotational correlation times (t_c ^-\tau_{\mathrm{c}}^{ -} ) of the water molecules around each sulfonate anion in the aqueous solutions to the rotational correlation time of pure water (t_c⁰\tau_{\mathrm{c}}^{0}) were obtained from the n _DHN(S⁻) and the hydration number (n_h ^-n_{\mathrm{h}}^{ -} ) results, which was calculated from the water accessible surface area (ASA) of the solute molecule. The t_c ^-/t_c⁰\tau_{\mathrm{c}}^{ -}/\tau_{\mathrm{c}}^{0} values for alkylsulfonate anions increase with increasing ASA in the homologous-series range of C₁ to C₄, but then become approximately constant. This result shows that the water structures of hydrophobic hydration near large size alkyl groups are less ordered. The rotational motions of water molecules around an aromatic group are faster than those around an n-alkyl group with the same ASA. That is, the number of water–water hydrogen bonds in the hydration water of aromatic groups is smaller in comparison with the hydration water of an n-alkyl group having the same ASA. Hydrophobic hydration is strongly disturbed by a sulfonate group, which acts as a water structure breaker. The disturbance effect decreases in the following order: $\mbox{--} \mathrm{SO}_{3}^{-} > \mbox{--} \mathrm{NH}_{3}^{ +} > \mathrm{OH}> \mathrm{NH}_{2}$\mbox{--} \mathrm{SO}_{3}^{-} > \mbox{--} \mathrm{NH}_{3}^{ +} > \mathrm{OH}> \mathrm{NH}_{2}. The partial molar volumes and viscosity B _V coefficients for alkylsulfonate anions are linearly dependent on their n _DHN(S⁻) values.     

Mixed-Valence 24-Vanadophosphate Decorated with Six RuII(dmso)3 Groups: [{RuII3(dmso)9PVV11VIVRuIIIO37(OH)3}2]8?

The mixed-valence 24-vanadophosphate (1) has been synthesized and characterized in the solid state by IR, magnetism, EPR, XPS, and elemental analysis. Single-crystal X-ray analysis was carried out on (Na-1), which crystallizes in the triclinic system, space group , with a = 17.168(3) ?, b = 18.1971(14) ?, c = 20.1422(13) ?, α = 114.753(3)°, β = 99.390(4)°, γ = 95.124(4)°, and Z = 2. Polyanion 1 has an unusual, open structure composed of 2 Ru^IIIO₆ octahedra, 2 V^IVO₆ octahedra, 14 V^VO₅ square-pyramids, 8 V^VO₄ tetrahedra, and 2 PO₄ tetrahedra which are all directly linked via edges and corners. The outer surface of 1 is decorated with six Ru^II(dmso)₃ groups. XPS studies on Na-1 confirm the presence of 2 Ru^III and 6 Ru^II as well as 22 V^V and 2 V^IV centers. Magnetic susceptibility data on Na-1 show that the V^IV–Ru^III pairs are coupled antiferromagnetically, with J ₁ = −13 K and J ₂ ∼ −3 K. We did not detect any peak in our EPR measurements on Na-1, thus supporting the conclusion that Na-1 is diamagnetic in its ground state. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. In Memoriam Prof. F. A. Cotton     

Mechanism of the catalyzed by cysteine electroreduction of the insoluble in water cobalt(II) salt as a component of carbon paste electrode

The mechanism of the Co(II) catalytic electroreduction of water insoluble CoR₂ salt in the presence of cysteine was developed. CoR₂ = cobalt(II) cyclohexylbutyrate is the component of a carbon paste electrode. Electrode surface consecutive reactions are: (a) fast (equilibrium) reaction of the complex formation, (b) rate-determining reversible reaction of the promoting process of CoR(Ac⁺) complex formation, (c) rate-determining irreversible reaction of the electroactive complex formation with ligand-induced adsorption, and (d) fast irreversible reaction of the electroreduction. Reactions (a,b) connected with CoR₂ dissolution and reactions (c,d) connected with CoR₂ electroreduction are catalyzed by . Regeneration of (reactions “b,d”) and accumulation of atomic Co(0) (reaction “d”) take place. Experimental data [Sugawara et al., Bioelectrochem Bioenergetics 26:469, 1991]: i _a vs E (i _a is anodic peak, E is cathodic accumulation potential), i _a vs , and i _a vs pH have been quantitatively explained.