Direct coupling of arenes and iodoarenes catalyzed by a rhodium complex with a strongly π-accepting phosphite ligand

A new rhodium-based catalytic system for the direct C-H coupling of arenes and iodoarenes that shows high activity with reasonably broad scope was developed. Under the catalytic influence of RhCl(CO){P[OCH(CF₃)₂]₃}₂ and Ag₂CO₃, the direct C-H arylation of heteroarenes and arenes took place with iodoarenes to afford a range of biaryls in good to excellent yields with high regioselectivity. Thiophenes, furans, pyrroles, indoles, and alkoxybenzenes are applicable to this arylation protocol.     

Transition metal-catalyzed arylation of unactivated C(sp3)-H bonds

Transition-metal-catalyzed C-H bond arylation has recently emerged as a powerful tool for the functionalization of organic molecules that may complement or even replace traditional catalytic cross-couplings. While many efforts have focused on the arylation of arenes and heteroarenes in the past two decades, less studies have been devoted to the arylation of nonacidic C-H bonds of alkyl groups. This tutorial review highlights recent work in this active area.     

Mechanistic analysis of iridium(III) catalyzed direct C-H arylations: a DFT study

In a recent experimental work the Ir complex [Ir(cod)(py)(PCy(3))](PF(6)) (that is, Crabtree's catalyst) has been shown to catalyze the C-H arylation of electron-rich heteroarenes with iodoarenes using Ag(2)CO(3) as base. For this process, an electrophilic metalation mechanism, (S(E)Ar) has been proposed as operative mechanism rather than the concerted metalation-deprotonation (CMD) mechanism, widely implicated in Pd-catalyzed arylation reactions. Herein we have investigated the C-H activation step for several (hetero)arenes catalyzed by a Ir(III) catalyst and compared the data obtained with the results for the Pd(II)-catalyzed C-H bond activation. The calculations demonstrate that, similar to Pd(II)-catalyzed reactions, the Ir(III)-catalyzed direct C-H arylation occurs through the CMD pathway which accounts for the experimentally observed regioselectivity. The transition states for Ir(III)-catalyzed direct C-H arylation feature stronger metal-C((arene)) interactions than those for Pd(II)-catalyzed C-H arylation. The calculations also demonstrate that ligands with low trans effect may decrease the activation barrier of the C-H bond cleavage.     

Pd(OAc)2/o-chloranil/M(OTf)n: a catalyst for the direct C-H arylation of polycyclic aromatic hydrocarbons with boryl-, silyl-, and unfunctionalized arenes

Pd(OAc)(2)/o-chloranil/M(OTf)(n) can effectively promote the C-H arylation of fluoranthene with arylboron compounds or arylsilanes. The reaction takes place with high regioselectivity at the C3 position of fluoranthene. Moreover, the new catalytic system allows the use of unfunctionalized arenes as coupling partners in the arylation of polycyclic aromatic hydrocarbons.     

Copper-catalyzed direct C-H oxidative trifluoromethylation of heteroarenes

This article describes the copper-catalyzed oxidative trifluoromethylation of heteroarenes and highly electron-deficient arenes with CF(3)SiMe(3) through direct C-H activation. In the presence of catalyst Cu(OAc)(2), ligand 1,10-phenanthroline and cobases tert-BuONa/NaOAc, oxidative trifluoromethylation of 1,3,4-oxadiazoles with CF(3)SiMe(3) proceeded smoothly using either air or di-tert-butyl peroxide as an oxidant to give the corresponding trifluoromethylated 1,3,4-oxadiazoles in high yields. Di-tert-butyl peroxide was chosen as the suitable oxidant for oxidative trifluoromethylation of 1,3-azoles and perfluoroarenes. Cu(OH)(2) and Ag(2)CO(3) were the best catalyst and oxidant for direct oxidative trifluoromethyaltion of indoles. The optimum reaction conditions enable oxidative trifluoromethylation of a range of heteroarenes that bear numerous functional groups. The prepared trifluoromethylated heteroarenes are of importance in the areas of pharmaceuticals and agrochemicals. The preliminary mechanistic studies of these oxidative trifluoromethylations are also reported.     

Palladium/2,2′-bipyridyl/Ag2CO3 catalyst for C-H bond arylation of heteroarenes with haloarenes

A Pd/bipy-based catalytic system for the C-H bond arylation of heteroarenes with haloarenes is described. The complex PdBr₂(bipy)·DMSO, whose structure was unambiguously determined by X-ray crystallography, turned out to be a general catalyst precursor for the process. The reaction is applicable to a range of electron-rich five-membered heteroarenes, such as thiophenes, thiazoles, benzofurans, and indoles.     

Copper-mediated C-H bond arylation of arenes with arylboronic acids

A new copper-mediated cross-coupling of arenes and arylboronic acids is described. Under the influence of Cu(OCOCF 3) 2, the C-H bond arylation of electron-rich arenes with arylboronic acids takes place to afford a range of biaryls in good yields. The reaction is selective for cross-coupling; no homocoupling product arising from arenes or arylboronic acids is detected. Multiple C-H bond arylation is possible with indoles and pyrroles furnishing interesting extended pi-systems.     

C-H activation of arenes and heteroarenes by early transition metallaborane, [(Cp*Ta)2B5H11] (Cp* = η5-C5Me5)

C-H activation of arenes and heteroarenes has been achieved by a hydrogen rich tantalaborane cluster [(Cp*Ta)(2)B(5)H(11)] that leads to the formation of C-H functionalized products. Furthermore, we examined the reaction of substituted thiophene and pyrrole derivatives with tantalaborane which provided a convenient and efficient route to regio-defined C-H functionalized heteroarenes.     

Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.     

Room temperature borylation of arenes and heteroarenes using stoichiometric amounts of pinacolborane catalyzed by iridium complexes in an inert solvent

Aromatic C-H borylation of arenes and heteroarenes using stoichiometric amounts of pinacolborane was catalyzed by an iridium complex generated from 1/2[Ir(OMe)(COD)]2 and 4,4'-di-tert-butyl-2,2'-bipyridine at room temperature in hexane and afforded the corresponding aryl- and heteroarylboronates in high yields with excellent regioselectivities.     

Double C-H functionalization in sequential order: direct synthesis of polycyclic compounds by a palladium-catalyzed C-H alkenylation-arylation cascade

Palladium-catalyzed cascade C-H alkenylation and arylation provides convenient access to polycyclic aromatic compounds. Treatment of 3-bromoaniline derivatives bearing a bromocinnamyl group on the nitrogen atom with a catalytic amount of [Pd(OAc)(2)] and PCy(3)·HBF(4) in the presence of Cs(2)CO(3) in dioxane affords naphthalene-fused indole derivatives in good yields. This double cyclization reaction is also applicable to heterocyclic substrates, giving fused indoles containing a heteroaromatic ring such as dibenzofuran, dibenzothiophene, carbazole, indole, or benzofuran through heterocyclic C-H arylation. When using a 2,6-unsubstituted aniline derivative, the first C-H arylation preferentially proceeds at the more hindered position of the aniline ring.     

Selective and catalytic arylation of N-phenylpyrrolidine: sp3 C-H bond functionalization in the absence of a directing group

We herein describe our studies on arylation of N-phenylpyrrolidine, which led to the development of a new transformation for the direct and selective arylation of sp3 C-H bonds in the absence of a directing group. In this method, Ru(H)2(CO)(PCy3)3 4 was used as the catalyst, and preliminary mechanistic studies suggested that Ru(Ph)(I)(CO)(PCy3)2 5 is the key intermediate of the catalytic cycle. A large kinetic isotope effect (kH/kD = 5.4) was observed, which supports the proposal that C-H bond metalation is the slow step. Preliminary examination of the substrate scope showed that in addition to N-phenylpyrrolidine, N-methyl- and N-benzylpyrrolidine, as well as N-benzoylpyrrolidine, were arylated under the reaction conditions.     

Polyfunctional Conjugated Microporous Polymers for Applications in Direct C-H Arylation of Unactivated Arenes and Aqueous Adsorption of Aromatic Amines

Salen-porphyrin-based conjugated microporous polymers(CMPs) have been demonstrated to be an attractive material platform for predesigned structures and promising applications. Herein, a new salen-porphyrin-based conjugated microporous polymer(SP-CMP-L) was solvothermally prepared by porphyrin-forming condensation reaction of pyrrole and salen-dialdehyde derivative. The SP-CMP-L was characterized by spectroscopy technologies, and also exhibited excellent thermal and chemical stability. The porosity of SP-CMP-L was examined by N₂ adsorption/desorption isotherms. The BET specific surface area of the CMP material was calculated to be 290.4 m²/g with the pore volume of 0.19 cm³/g. The microstructure property of the resulting material was further evaculated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM). The SP-CMP-L with salen and porphyrin multidentate coordination sites was proposed to serve as an initiator to promote the cross-coupling between aryl halides with unactivated arenes under base-mediated conditions. The transition-metal-free catalytic protocol provided high catalytic activity for direct C-H arylation reaction of unactivated arenes, and thus offered a convenient and efficient alternative for the construction biaryl scaffolds. In addition, the salen-porphyrin-based CMP material possessed remarkable adsorption capability for the removal of organic amines from water.     

Copper-catalyzed α-selective C-H trifluoromethylation of acrylamides with TMSCF3

A copper-catalyzed α-selective C-H trifluoromethylation of acrylamides with TMSCF₃ is described. A wide range of arenes and heteroarenes at the β-position of acrylamides are compatible with the reaction, affording the corresponding (E)-trifluoromethylated products in moderate to good yields. The reaction proceeded fast and can be completed within 30 min.     

Catalytic C-H arylation of SEM-protected azoles with palladium complexes of NHCs and phosphines

[reaction: see text] The synthesis and catalytic evaluation of palladium complexes containing imidazolyl carbene ligand of varying steric and electronic properties is reported. These complexes catalyze the efficient C-H arylation of SEM-protected azole heteroarenes and thus provide a good method for preparation of a wide range of arylated free (NH)-azoles including pyrroles, indoles, imidazoles, and imidazo[1,2-a]pyridines. The reaction is operationally simple; the complexes are insensitive to moisture.     

Ligand-free CuO nanospindle catalyzed arylation of heterocycle C-H bonds

CuO nanospindles have been developed to efficiently catalyze the direct arylation of heterocycle C-H bonds with moderate to excellent yields. This reaction can be applied to heterocycles such as benzoxazole, benzothiazole, and 1-methylbenzimidazole in the presence of a more environmentally friendly inorganic base like K(2)CO(3) under ligand-free catalytic conditions. In addition, the catalyst can be recycled and reused without any significant decrease in catalytic activity.     

The first use of [PdBr2(imidazolidin-2-ylidene)(pyridine)] catalysts in the direct C-H bond arylation of C2-substituted furan and thiophene

Research on Chemical Intermediates - N-Heterocyclic carbene (NHC)-linked PEPPSI-type palladium complexes have recently been used in the direct C-H bond arylation of heteroarenes. However, in most...     

Pd(II)-catalyzed para-selective C-H arylation of monosubstituted arenes

Pd-catalyzed highly para-selective C-H arylation of monosubstituted arenes (including toluene) is developed for the first time using an F(+) reagent as a bystanding oxidant. This finding provides a new retrosynthetic disconnection for para-substituted biaryl synthesis via C-H/C-H cross-coupling.     

Catalytic Arylation of a C?H Bond in Pyridine and Related Six‐Membered N‐Heteroarenes Using Organozinc Reagents

Despite significant advances in the catalytic direct arylation of heteroarenes, the application of this reaction to pyridines has been met with limited success. An oxidative nucleophilic arylation strategy has been developed to overcome this problem. Pyridine, pyrazine, quinolone, and related electron‐deficient N‐heteroarenes can be arylated at the most electrophilic site using the developed nickel‐catalyzed reaction. This protocol serves as a complementary method to catalytic direct arylation reactions.     

Metal-free, visible-light-mediated direct C-H arylation of heteroarenes with aryl diazonium salts

Visible light along with 1 mol % eosin Y catalyzes the direct C-H bond arylation of heteroarenes with aryl diazonium salts by a photoredox process. We have investigated the scope of the reaction for several aryl diazonium salts and heteroarenes. The general and easy procedure provides a transition-metal-free alternative for the formation of aryl-heteroaryl bonds.