Directivity of the intramolecular O→Si bond in pentacoordinate organosilicone compounds

According to the data of X-ray diffraction analysis and quantum chemical calculations, in the hypervalent silicon compounds where the coordination cycle is closed by the C=O→Si-F fragment, the O→Si interatomic distance is governed by the orientation of the silicon atom determined by the C=O→Si angle. This is an indication of a directivity of the coordination bond O→Si; a regular variation in the nature of the latter is reflected in the observed dependence of the O→Si distance on the C=O→Si angle.     

Influence of variation in the silicon content on the silicon precipitation in the Al–Si binary system

Ti-based amorphous alloys produced by ultra-rapid melt cooling represent an excellent option as biomaterials because of their mechanical properties and corrosion resistance. However, complete elimination of toxic elements is affecting the glass-forming ability and amorphous structure could be obtained only for thin ribbons or powders that are subsequently processed by powder metallurgy. Amorphous ribbons of special Ti₄₂Zr₄₀Ta₃Si₁₅ alloy, which is completely free of any toxic element, were produced by melt spinning, and the thermostability of resulting material was investigated in order to estimate its ability for further heat processing. Isochronal differential scanning calorimetry (DSC) was used to determine transformation points such as glass transition temperature T _g or crystallization temperature T _x. The activation energy for crystallization of amorphous phase was calculated based on Kissinger method, using heating rates ranging between 5 and 20 °C min^?1. Amorphous structure of resulting ribbon was evidenced by means of X-rays diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM). It was determined that amorphous Ti₄₂Zr₄₀Ta₃Si₁₅ alloy has a high activation energy for crystallization, similar to other Ti-based amorphous alloys, which provides good thermal stability for subsequent processing, especially by means of powder metallurgy techniques.     

Enhancement of SiH bond reactivity in pentacoordinated structures

The reactions of pentacoordinated silicon dihydrides with alcohols, carboxylic acids and carbonyl compounds have been studied. The dihydrides are markedly more reactive than the corresponding tetracoordinated species.     

The nature of the O—O bond in hydroperoxides

Quantum-chemical calculations of the H₂O₂ and F₂ molecules using different computational schemes, basis sets, and procedures for the inclusion of electron correlation were performed. High-resolution X-ray diffraction study of the electron density distribution in the crystals of 2,5-dimethyl-2,5-dihydroperoxyhexane and 2,5-dimethyl-2,5-dihydroperoxyhex-3-yne was carried out. Joint analysis of the results obtained showed that the formally covalent O—O and F—F bonds correspond to a specific type of interatomic interaction. This type is intermediate between the shared and closed-shell interactions (the latter are typical of the ionic systems and van der Waals molecules).     

Influence of NO on the Reduction of NO2 with CO over Pt/SiO2 in the Presence of O2

Reduction of NO2 with CO in the presence of NO and excess oxygen, a model mixture for flue gas, over a 0.1% Pt/SiO2 catalyst was studied. The related reaction mechanisms, such as oxidation of CO and NO, were discussed. It was found that there was a narrow temperature window （180-190 ℃） for the reduction of NO2 by CO. When the temperature was lower than the lower limit of the window, the reduction hardly occurred, while when the temperature was higher than the upper limit of the window, the direct oxidation of CO by O2 occurred and thereby NO2 could not be effectively reduced by CO. The presence of NO shifted the window to higher temperatures owing to the inhibition effect of NO on the activation of O2 on Pt, which made it possible to reduce NO2 by CO in flue gas.     

Influence of valence and concentration of electrolytes on the ζ-potential of polyacrylic lattices

The -potential of copolymer particles of acrylic amide, acrylic acid, acrylic butyl ester, and styrene were measured in different electrolyte solutions. In an isotonic solution of sodium chloride, they vary with the content of acrylic acid between –36 mV and –49 mV. In the presence of 21-electrolytes, the -potential could be correlated with the logarithm of the electrolyte concentration. The 21-electrolytes predominantly determine the -potential of the particles not only in the solutions of these electrolytes, but also in mixed electrolyte solutions. In the presence of human serum, the electrophoretic mobility increases with increasing acrylic acid content of the polymer.     

Critical comparison of equations correlating valence and length of a chemical bond. Evaluation of the parameters R1 and B for the MoO bond in MoO6 octahedra

The most commonly used equations correlating bond valence and bond length have been critically compared. It has been shown that the Zachariasen equation is more accurate than the Brown–Shannon equation. Doubts already voiced about the universality of the constant B in the Brown–Altermatt equation with a value of 0.37 Å have been hereby confirmed. Moreover, by a method based on the comparison of formal oxidation states and valences of molybdenum in suitable oxides, the parameters relative to the Zachariasen equation have been accurately determined for the MoO bond in MoO₆ octahedra. Their values are R₁=1.8790 and B=0.3048 Å in the 3–6 v.u. range.     

Structure of (O→Si)-(acetoxymethyl)trifluorosilane in three phase states and in solutions

According to the IR spectroscopy data, the molecules of (O→Si)-(acetoxymethyl)trifluorosilane having in the liquid state and in polar media the intramolecular bond C=O→Si, exist in the gas phase in the temperature range 438–538 K in the equilibrium with the molecules with tetracoordinate silicon atom. This allowed to determine experimentally the enthalpy of formation of the intramolecular bond C=O→Si for the gas phase to be ΔH = 2.2±0.1 kcal mol⁻¹. In the solid state at 110 K and in the CS₂ solution, along with molecule with the C=O→Si bond, the dimers exist, which include both tetra- and pentacoordinate silicon atom. The data of quantum-chemical calculations (B3LYP/6-311G**) show that the shortest intermolecular bond Si-F→Si is realized in the associate formed by the molecules in the ap,sp- and sp,sp-forms, and the longest one, when both components are in the sp,sp-forms.     

Investigation of rotational isomerism along the C-O bond in α-aryloxycarbonyl compounds

Electrical and electrooptical characteristics of -phenoxycyclohexanone, -phenoxyacetone,p-Me-,p-Cl-,p-Br-,p-NO ₂ -phenoxycyclohexanones, andp-NO ₂ -phenoxyacetone in the solution in CCl ₄ were determined; these were utilized for the conformational analysis of the general structural fragment Ar-O-C-C=O. The presence of conformers with theac- andsp-structure at the C _sp 3-C _sp 2 bond was established in the equilibrium. The content of thesp-form increases with the increase in the polar character of the substituent at thep-position of the benzene ring. Thegauche isomer (sp-G orsp-G) is realized along the C-O bond in it. In theac-conformers, both thegauche (ac-G) and the trans (ac-T) structures can be realized along the C-O bond.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Scientific Center, Russian Academy of Sciences, Kazan' 420083. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 612–620, March, 1992.     

Electron-withdrawing effect of α-substituents in acyl nitrates on the polarization of the O–NO2 bond

1. Download high-res image (94KB)
2. Download full-size image

     

Influence of crystallite structure of nanometer TiO_2 catalysts on photocatalyst reaction

25 samples of nanometer TiO2 were prepared through modifying the preparation conditions including the concentrations of Ti(SO4)2 and NH4HCO3, the pH value at the end of precipitation operation, and sintering temperature and time by methods of orthogonal design. The relationships between their catalytic activities of photocatalytic degradation of sodium dodecyl benzene sulfonate (SDBS) and the normal crystallite size, lattice-strain and X-ray diffraction intensity of 10 crystal faces were analyzed. It was discovered that the photocatalytic degradation reaction of SDBS follows first-order kinetics. Crystal faces of catalysts' (101) have greater influence than other crystal faces on the reaction. The photocatalytic reaction needs more perfect (101) crystal faces with less lattice-strain. Smaller normal crystallite size and greater specific surface area of (101) crystal face are better for increasing reaction rate. The photocatalytic reaction is mainly proceeded on the (101) crystal face, comparatively, amor     

Crystal structure and properties of the Na1−x Ru2O4 phase

Sodium ruthenium(III,IV) oxide Na_1−x Ru₂O₄ was synthesized by the solid state reaction of Na₂CO₃ and RuO₂ in inert atmosphere and characterized by X-ray powder diffraction, electron diffraction, and high-resolution transmission electron microscopy. The compound crystallizes in the CaFe₂O₄-type structure (space group Pnma, Z = 4, a = 9.2641(7) Å, b = 2.8249(3) Å, c = 11.1496(7) Å). Double rutile-like chains of the RuO₆ octahedra form a three-dimensional framework, whose tunnels contain sodium cations. The structure contains two crystallographically independent sites of ruthenium atoms randomly occupied by the Ru^III and Ru^IV cations. The superstructure with the doubled b parameter found for one of the samples under study using electron diffraction is caused, probably, by ordering of the Ru cations in the rutile-like chains. The Na_{1− x} Ru₂O₄ compound exhibits temperature-independent paramagnetism with χ₀ = 1.9·10⁻⁴ cm³ (mole of Ru⁻¹). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1655–1660, October, 2006.     

Influence of SiO_3~（2-）Impurity on the Optical Properties of KDP Crystal

In this paper,potassium dihydrogen phosphate(KDP) crystals were grown in the presence of a series of silicate(SiO32-) impurity concentrations via conventional temperature cooling and rapid growth methods,respectively.It revealed that the SiO32-impurity could lead to the decrease of transmittance at the region of ultraviolet band for pyramidal sectors and slightly increased the transmittance for prismatic sectors.SiO32-could enter into the crystal lattice and create lattice defects,which consequently increased the density of light scatter.The decrease of laser damage threshold was attributed to the lattice defects and the redundant electrons brought by the replacement of SiO32-at the PO43-position.     

Overton-Region IR Registration of (≡Si–O)2Si=O and (≡Si–O)2Si〈O2〉C=O Groups on the Silica Surface

IR spectroscopy in a range of 2050–4000 cm^–1 (the range of overtones and composite frequencies) is used to study the groups (Si–O)₂Si=O and (Si–O)₂SiO₂C=O with different isotopic compositions (¹⁶O, ¹⁸O, ¹²C, and ¹³C). Analysis of the experimental data and quantum-chemical calculations of vibrational spectra for the model compounds are used to identify the IR bands. New data are obtained on the vibrational spectra of these groups. Their identification is shown to be possible in the spectral range that is convenient for the study of silica samples.     

Influence of the synthesis conditions on the structure and composition of the titanium–magnesium nanocatalyst and on its activity in isoprene polymerization

Synthesis of titanium–magnesium nanocatalyst in a high-pressure reactor under the conditions modeling the industrial conditions was studied. A laboratory scale plant including the units for the product synthesis, washing, and filtration was developed. The effect of elevated pressure (10–90 atm) on the process course, on the properties of the catalyst formed, and on the isoprene polymerization was studied for the first time. An increase in pressure leads to an increase in titanium incorporation into the catalyst from 1.52 to 2–2.3 wt % and simultaneously to an increase in the trivalent titanium content to 81 wt %. The titanium–magnesium nanocatalyst with such properties exhibits enhanced performance in isoprene polymerization without deteriorating the polymer microstructure. The development of the catalyst synthesis procedure on the laboratory scale plant will allow pilot-scale modeling of this process in the future.     

Elucidating the structure of surface acid sites on γ-Al2O3

Differential pair distribution function analysis was applied to resolve, with crystallographic detail, the structure of catalytic sites on the surface of nanoscale γ-Al(2)O(3). The structure was determined for a basic probe molecule, monomethylamine (MMA), bound at the minority Lewis acid sites. These active sites were found to be five-coordinate, forming distorted octahedra upon MMA binding. This approach could be applied to study the interaction of molecules at surfaces in dye-sensitized solar cells, nanoparticles, sensors, materials for waste remediation, and catalysts.     

X-ray photoelectron spectroscopy for detection of the different Si–O bonding states of silicon

X-ray photoelectron spectroscopy (XPS) was used to detect the bonding between a silica particle surface and attached silanes. In addition to the commonly recorded Si 2p spectrum, the Si 1 s level is also accessible when monochromatic Ag Lalpha X-rays are applied. Furthermore, the spectrum of the Si 1 s level shows a fine structure. After spectrum deconvolution, we assigned the fitted spectral peaks to Si-C bonds of the silanes and to the Si-O bonds of the silica network. The recorded Si 1 s spectra were deconvoluted into peaks originating from Si-C bonds and the Si-O-Si silica network. To check the results of spectrum deconvolution, several differently functionalized silanes containing stoichiometric amounts of heteroatoms were applied for silica surface modification. We conclude that spectra deconvolution of the Si 1 s signal is an appropriate means for quantification of surface attached silane molecules.