The Colloidal Stabilization of Carbon with Carbon: Carbon Nanobubbles as both Dispersant and Glue for Carbon Nanotubes

The superior physical properties of carbon nanotubes (CNTs) have led to their broad application. Intrinsically, CNTs tend to agglomerate from hydrophobic interactions, which is highly undesirable for solution processing and device fabrication. Commonly, a stabilizer consisting of organic surfactants or polymers is used to disperse CNTs. Recently, we synthesized nitrogen‐doped carbon hollow nanospheres (25–90 nm), termed carbon “nanobubbles”. They bear superior dispersability in water and distinctive graphitic order. Herein, we describe the nanobubble‐assisted dispersion of CNTs in aqueous solution upon sonication. This process relies on the π–π interaction between the two aromatic carbon nanostructures, which can process their carbon mixture in water into conductive filter membranes, ink, and discs. This stabilization can be extended to other aromatic carbons. In addition, the π–π interaction may create a new type of carbon p–n junction that can be used to improve charge separation.     

Mesoporous Nickel Oxide Nanowires: Hydrothermal Synthesis,Characterisation and Applications for Lithium‐Ion Batteries and Supercapacitors with Superior Performance

Mesoporous nickel oxide nanowires were synthesized by a hydrothermal reaction and subsequent annealing at 400 °C. The porous one‐dimensional nanostructures were analysed by field‐emission SEM, high‐resolution TEM and N₂ adsorption/desorption isotherm measurements. When applied as the anode material in lithium‐ion batteries, the as‐prepared mesoporous nickel oxide nanowires demonstrated outstanding electrochemical performance with high lithium storage capacity, satisfactory cyclability and an excellent rate capacity. They also exhibited a high specific capacitance of 348 F g^?1 as electrodes in supercapacitors.     

Environmentally Benign,Intrinsically Coordinated,Lithium-Based Solid Electrolyte with a Modified Purine as Supporting Ligand

Bioinspired materials have become increasingly competitive for electronic applications in recent years owing to the environment-friendly alternatives they offer. The notion of biocompatible solid organic electrolytes addresses the issues concerning potential leakage of corrosive liquids, volatility and flammability of electrolyte solvents. This study presents a new intrinsically coordinated Li^I adenine complex that exhibits electrical conductivity as a solid electrolyte capable of self-sustained supply of Li^I ions. It exhibits conductivity through moisture-assisted Li^I ion motion up to 373 K, and possibly by an ion-hopping mechanism beyond 373 K. This purine-derived solid electrolyte shows enhanced conductivity and transference number demonstrating the potential of purine-based ligands and their coordination complexes in interesting materials applications.     

Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.     

Trialkylammoniododecaborates: anions for ionic liquids with potassium, lithium and protons as cations

Herein we report a new class of low-melting ionic liquids (IL) that consist of N,N,N-trialkylammonioundecahydrododecaborates(1-) as the anion and a range of cations. The cations include the common cations of conventional ILs such as tetraalkylammonium, N-alkylpyridinium, and N-methyl-N'-alkylimidazolium. In addition, their salts with lithium, potassium, and proton cations also exist as ILs. Pulse radiolysis studies indicate that the anions do not react with solvated electrons.     

The loading of polyoxometalates compound on a biomass derived N-doped mesoporous carbon matrix,a composite material for electrical energy storage

Abstract

A polyoxometalate (POM)-based composite material (NiPW₁₂NP/NMC) was synthesized, in which the nanoparticle of a POM compound (NiPW₁₂NP) distributes on orange juice derived nitrogen doped mesoporous carbon matrix (NMC) homogenously. When employed as a cathode material, NiPW₁₂NP/NMC exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4?A·g^?1, a specific capacitance as high as 547 F·g^?1 is achieved by NiPW₁₂NP/NMC. With NiPW₁₂NP/NMC serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor is assembled, which possesses a high energy density of 10.88?Wh·kg^?1 at 0.64?kW·kg^?1. It also shows a good rate capability, when the current density increases from 4 to 12?A·g^?1, its specific capacitance decreases from 113 to 88 F·g^?1, with 77.9% capacitance retention. After 5000 cycles charge-discharge experiments, 92.8% of its capacitance can be maintained, which exhibits good stability.     

A ternary phased SnO2-Fe2O3/SWCNTs nanocomposite as a high performance anode material for lithium ion batteries

A new SnO_2-Fe_2O_3/SWCNTs(single-walled carbon nanotubes) ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO_2 and Fe_2O_3 nanoparticles(NPs) were homogeneously located on the surface of SWCNTs,as confirmed by X-ray diffraction(XRD),transmission electron microscope(TEM) and energy dispersive X-ray spectroscopy(EDX).Due to the synergistic effect of different components,the as synthesized SnO_2-Fe_2O_3/SWCNTs composite as an anode material for lithium-ion batteries exhibited excellent electrochemical performance with a high capacity of 692 mAh·g~(-1) which could be maintained after 50 cycles at 200 mA·g~(-1).Even at a high rate of2000 mA·g~(-1),the capacity was still remained at 656 mAh·g~(-1).     

When Mesoporous Silica Meets the Alkaline Polyelectrolyte: A Controllable Synthesis of Functional and Hollow Nanostructures with a Porous Shell

An efficient and environment friendly surface‐protected etching method by using mesoporous silica as a template and alkaline polyelectrolyte as both the protecting and etching agent was developed to prepare a SiO₂ nanotube with a porous shell. The polyelectrolytes attached to the template not only create a localized alkaline environment, but also effectively protect the silica surface, whereas the mesopore channels accelerate the diffusion of etchant throughout the template, all of which facilitate the formation of hollow structures in a fully controllable way. By tuning the etching power and protecting ability of the polyelectrolyte, the rigidity and porosity of products can be precisely manipulated. It is inspiring that various alkaline polyelectrolytes including polypeptide and dextran derivative can be used for the etching process, so that the porous and hollow nanostructures are born with positively charged and biocompatible surface as well as abundant amino groups for further coupling, which make them potential capsules for drug delivery and probes for imaging and detection. The protective etching process can also be extended to the preparation of yolk‐shell super structures with functional cores, or porous nanoparticle assemblies with their individual characteristics maintained.     

Graphene Nanosheets as a Platform for the 2D Ordering of Metal Oxide Nanoparticles: Mesoporous 2D Aggregate of Anatase TiO2 Nanoparticles with Improved Electrode Performance

Graphene nanosheets are successfully applied as an effective platform for the 2D ordering of metal oxide nanoparticles. Mesoporous 2D aggregates of anatase TiO₂ nanoparticles are synthesized by the heat treatment of the uniformly hybridized nanocomposite of layered titanate–reduced graphene oxide (RGO) at elevated temperatures. The precursor layered titanate–RGO nanocomposite is prepared by self‐assembly of anionic RGO nanosheets and cationic TiO₂ nanosols. The calcination of the as‐prepared layered titanate–RGO nanocomposite at 500 °C induces a structural and morphological change of layered titanate nanoplates into anatase TiO₂ nanoparticles without significant modification of the RGO nanosheet. Increasing the heating temperature to 600 °C gives rise to elimination of the RGO component, leading to the formation of sheetlike porous aggregates of RGO‐free TiO₂ nanoparticles. The nanocomposites calcined at 500–700 °C display promising functionality as negative electrodes for lithium ion batteries. Among the present calcined derivatives, the 2D sheet‐shaped aggregate of TiO₂ nanoparticles obtained from calcination at 600 °C delivers the greatest specific discharge capacity with good capacity retention for all current density conditions applied. Such superior electrode performance of the nanocomposite calcined at 600 °C is attributable both to the improved stability of the crystal structure and crystal morphology of titania and to the enhancement of Li⁺ ion transport through the enlargement of mesopores. The present findings clearly demonstrate the usefulness of RGO nanosheets as a platform for 2D‐ordered superstructures of metal oxide nanoparticles with improved electrode performance.     

A Robust Mesoporous Al2O3-Based Nanocomposite Catalyst for Abundant NOx Storage with Rational Design of Pt and Ba Species

The nanostructural design of heterogeneous catalysts has often been demanded for assessing synergetic effects, which should be developed further by using high-surface-area porous metal oxide supports. However, such opportunities have been undermined by the poor stability of ordered mesoporous structures. Herein, rational design is demonstrated to obtain nanocomposite catalysts showing improved NO_x storage properties owing to the presence of Ba species over a well-designed mesoporous alumina (Al₂O₃) support. It is found that Ba species are impregnated successfully only after the stabilization of the mesoporous structure by full crystallization of Al₂O₃ frameworks to the γ-phase, with the formation of Pt nanoparticles coinciding with complete removal of organic components. All the insights during this synthetic procedure are essential for designing high-performance catalysts to purify and recover NO_x molecules, and are applied for designing a variety of cutting-edge mesoporous nanocomposite catalysts.     

Novel use of mesoporous aluminas as supports for Cp2ZrCl2 and Cp*ZrMe3: Ethylene polymerization and formation of polyethylene nanofibers

Mesoporous aluminas with average pore sizes of 4.3–7.8 nm were prepared by anodization of an aluminum film (AAO), and by a sol–gel templating method (TPL). In addition to a commercial alumina and sulfated TPL, the aluminas were used as supports for cyclopentadienyl zirconocene dichloride (Cp₂ZrCl₂) and trimethyl(η5‐pentamethylcyclopentadienyl)zirconium (Cp*ZrMe₃) and tested in the polymerization of ethylene. The metallocenes supported on the alumina prepared with the templating method and its sulfated modification exhibited polymerization activities of 440 and 350 kg_PE/(mol_Zr × h × bar), respectively, comparable to that obtained with silica‐supported metallocenes (390 kg_PE/(mol_Zr × h × bar)). The acid site distribution of the aluminas was studied with FTIR and temperature programmed desorption (TPD) of pyridine, and also the amount of medium and strong acid sites was determined gravimetrically from the adsorption of pyridine. Relative to the surface area, AAO with the highest amount of acid sites (2.10 μmol_py/m) adsorbed Cp₂ZrCl₂ and Cp*ZrMe₃ the most. Study of the polymers' morphology with a scanning electron microscope revealed polyethylene nanofibers in all the polymer samples, also in those obtained from the reference polymerizations with homogeneous Cp₂ZrCl₂ and Cp*ZrMe₃. This finding suggests that a catalyst support with a tubular pore structure is not a prerequisite for the formation of polymer nanofibers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4002–4012, 2007