Dynamic torsional buckling of a double-walled carbon nanotube embedded in an elastic medium

An elastic double-shell model based on continuum mechanics is presented to study the dynamic torsional buckling of an embedded double-walled carbon nanotube. Based on the presented model, a condition is derived to predict the buckling load of the embedded double-walled nanotube, and the effect of the van der Waals forces to the buckling load is discussed when an inner nanotube is inserted into an embedded outer one. In particular, the paper shows that the buckling load of the embedded double-walled nanotube is always between that of the isolated inner nanotube and that of the embedded outer nanotube for both dynamic and static torsional buckling, due to the effect of the van der Waals forces. This result is different from that obtained by the existing analysis neglecting the difference of the radii for the embedded double-walled nanotube, which indicates that disregarding the difference of the radii of multi-walled nanotubes cannot properly describe the effect of the van der Waals forces between interlayer spacing. In particular, for static torsional buckling of a double-walled nanotube, it is shown that the critical buckling load cannot only be enhanced, but also be reduced when inserting an inner nanotube into an isolated single-walled one. Additionally, it is shown that the elastic medium always increases the critical buckling load of double-walled nanotubes. The critical buckling load of embedded double-walled nanotubes for dynamic torsional buckling is proved to be no less than that for static torsional buckling.     

考虑范德华力曲率效应的双壁碳纳米管外压屈曲

针对双壁碳纳米管外压屈曲问题,研究了层间范德华力的曲率效应对临界外压的影响。应用弹性双层圆柱壳模型,考虑层间范德华力不仅与层间距有关而且与挠度曲率的变化有关,导出了外压屈曲临界压力解析公式。计算得出在不同半径、不同长细比下,外压屈曲临界压力的数值结果,并与经典壳的结果和忽略范德华力曲率效应的结果做了比较。结果显示,对于小半径的双壁碳纳米管曲率效应对外压屈曲有效明显的影响。     

双层碳纳米管在扭矩作用下的屈曲

考虑双层碳纳米管层间范德华力的作用,利用连续介质力学的壳体理论,建立了扭矩作用下碳纳米管屈曲问题的双层弹性壳体模型,给出了相应的临界屈曲扭矩,分析了双层碳纳米管层间范德华力对临界屈曲扭矩的影响。     

Dynamic torsional buckling of multi-walled carbon nanotubes embedded in an elastic medium

In this paper the dynamic torsional buckling of multi-walled carbon nanotubes （MWNTs） embedded in an elastic medium is studied by using a continuum mechanics model. By introducing initial imperfections for MWNTs and applying the preferred mode analytical method, a buckling condition is derived for the buckling load and associated buckling mode. In particular, explicit expressions are obtained for embedded double-walled carbon nanotubes （DWNTs）. Numerical results show that, for both the DWNTs and embedded DWNTs, the buckling form shifts from the lower buckling mode to the higher buckling mode with increasing the buckling load, but the buckling mode is invari- able for a certain domain of the buckling load. It is also indicated that, the surrounding elastic medium generally has effect on the lower buckling mode of DWNTs only when compared with the corresponding one for individual DWNTs.     

INVESTIGATION OF THE DYNAMIC BUCKLING OF DOUBLEWALLED CARBON NANOTUBE SUBJECTED TO AXIAL PERIODIC DISTURBING FORCES

IntroductionThediscoveryofthefirstcarbonnanotubes[1]hasattractedwideattentionandstimulatedextensivestudies[2 - 5 ].Thestudiesshowedthatthecarbonnanotubesexhibitsuperiormechanical,electronicandchemicalproperties.Onthemechanicalbehavior,thecarbonnanotubespossessexceptionallyhighstrength ,stiffnessandelasticmodulus.Theestimatemodulusofthecarbonnanotubemayreachashighas 1TPa.Itisthelargestofallknownmaterials.Thestrengthorstiffnessishigherthananyknownfiber[3].Thecarbonnanotubeareusedascompositemat…     

The thermal effect on axially compressed buckling of a double-walled carbon nanotube

The thermal effect on axially compressed buckling of a double-walled carbon nanotube is studied in this paper. The effects of temperature change, surrounding elastic medium and van der Waals forces between the inner and outer nanotubes are taken into account. Using continuum mechanics, an elastic double-shell model with thermal effect is presented for axially compressed buckling of a double-walled carbon nanotube embedded in an elastic matrix under thermal environment. Based on the model, an explicit formula for the critical axial stress is derived in terms of the buckling modes of the shell and the parameters that indicate the effects of temperature change, surrounding elastic medium and the van der Waals forces. Based on that, some simplified analysis is carried out to estimate the critical axial stress for axially compressed buckling of the double-walled carbon nanotube. Numerical results for the general case are obtained for the thermal effect on axially compressed buckling of a double-walled carbon nanotube. It is shown that the axial buckling load of double-walled carbon nanotube under thermal loads is dependent on the wave number of axially buckling modes. And a conclusion is drawn that at low and room temperature the critical axial stress for infinitesimal buckling of a double-walled carbon nanotube increase as the value of temperature change increases, while at high temperature the critical axial stress for infinitesimal buckling of a double-walled carbon nanotube decrease as the value of temperature change increases.     

Torsional buckling of a double-walled carbon nanotube embedded in an elastic medium

The torsional buckling of a double-walled carbon nanotube embedded in an elastic medium is studied in this paper. The effects of surrounding elastic medium and van der Waals forces between the inner and outer nanotubes are taken into account. Using continuum mechanics, an elastic double-shell model is presented for the torsional buckling of a double-walled carbon nanotube. Based on the model, a condition is derived in terms of the buckling modes of the shell and the parameters describing the effect of van der Waals interaction and surrounding elastic medium. A simplified analysis is also carried out estimate the critical torque for torsional buckling of the double-walled carbon nanotube.     

Prediction of the critical buckling load of multi-walled carbon nanotubes under axial compression

In this paper, we propose a new explicit analytical formula of the critical buckling load of double-walled carbon nanotubes (DWCNT) under axial compression. This formula takes into account van der Waals interactions between adjacent tubes and the effect of terms involving tube radii differences generally neglected in the derived expressions of the critical buckling load published in the literature. The elastic multiple Donnell shells continuum approach is employed for modelling the multi-walled carbon nanotubes. The validation of the proposed formula is made by comparison with a numerical solution. The influence of the neglected terms is also studied.     

Study of dynamic stability of the double-walled carbon nanotube under axial loading embedded in an elastic medium by the energy method

In this paper, the dynamic stability of single- and double-walled carbon nanotubes (SWCNT and DWCNT) under dynamic axial loading is investigated using the continuum mechanics model and the minimum total energy method. The natural frequencies of the SWCNT and the critical dynamic axial load of the SWCNT and DWCNT are obtained using the Rayleigh-Ritz method. The effects of the elastic medium and the van der Waals forces between the two layers in the DWCNT are taken into account using the Winkler model and Lennard-Jones theory, respectively. The effect of the small length scale is also considered using the Eringen Model. The critical dynamic axial load is increased by inserting an inner carbon nanotube (CNT) into an isolated CNT embedded in an elastic medium.     

Buckling behavior of perfect and defective DWCNTs under axial, bending and torsional loadings via a structural mechanics approach

The buckling behavior of perfect and defective double-walled carbon nanotubes (DWCNTs) under axial compressive, torsional and bending loadings is investigated using a structural mechanics model. The effects of van der Waals (vdW) forces are further modeled using a nonlinear spring element. Critical buckling loads, critical buckling moments and the effects of vacancy defects were studied for armchair nanotubes with various aspect ratios. The results show that vacancy defects greatly reduce the critical buckling load of DWCNTs. The density of defects plays an important role in buckling of DWCNTs. The results of this numerical model are in good agreement with their comparable existing works.     

Curvature effects on axially compressed buckling of a small-diameter double-walled carbon nanotube

The curvature effects of interlayer van der Waals (vdW) forces on axially compressed buckling of a double-walled carbon nanotube (DWNT) of diameter down to 0.7 nm are studied. Unlike most existing models which assume that the interlayer vdW pressure at a point between the inner and outer tubes depends merely on the change of the interlayer spacing at that point, the present model considers the dependence of the interlayer vdW pressure on the change of the curvatures of the inner and outer tubes at that point. A simple expression is derived for the curvature-dependence of the interlayer vdW pressure in which the curvature coefficient is determined. Based on this model, an explicit formula is obtained for the axial buckling strain. It is shown that neglecting the curvature effect alone leads to an under-estimate of the critical buckling strain with a relative error up to −7%, while taking the average radius of two tubes as the representative radius and the curvature effect leads to an over-estimate of the critical buckling strain with a relative error up to 20% when the inner radius downs to 0.35 nm. Therefore, the curvature effects play a significant role in axially compressed buckling problems only for DWNTs of very small radii. In addition, our results show that the effect of the vdW interaction pressure prior to buckling of DWNTs under pure axial stress is small enough and can be negligible whether the vdW interaction curvature effects are neglected or not.     

Effects of layer number and initial pressure on continuum-based buckling analysis of multi-walled carbon nanotubes accounting for van der Waals interaction

The structural instability of multi-walled carbon nanotubes (MWCNTs) has captured extensive attention due to the unique characteristic of extremely thin hollow cylinder structure. The previous studies usually focus on the buckling behavior without considering the effects of the wall number and initial pressure. In this paper, the axial buckling behavior of MWCNTs with the length-to-outermost radius ratio less than 20 is investigated within the framework of the Donnell shell theory. The governing equations for the infinitesimal buckling of MWCNTs are established, accounting for the van der Waals (vdW) interaction between layers. The effects of the wall number, initial pressure prior to buckling, and aspect ratio on the critical buckling mode, buckling load, and buckling strain are discussed, respectively. Specially, the four-walled and twenty-walled CNTs are studied in detail, indicating the fact that the buckling instability may occur in other layers besides the outermost layer. The obtained results extend the buckling analysis of the continuum-based model, and provide theoretical support for the application of CNTs.     

范德华力对多壁纳米碳管力学性质的影响

用分子动力学方法模拟了多壁纳米碳管在压缩、弯曲变形下力与变形的关系．通过与组成多壁碳管的各单壁碳管的比较分析,揭示了多壁纳米碳管层间范德华力对碳管力学性质的影响．采用Tersoff-Brenner势描述每一单壁纳米碳管内原子间作用,采用Lennard-Jones势描述碳管壁间范德华力．计算结果表明：多壁纳米碳管的比强度明显高于单壁纳米碳管．纳米碳管的半径虽然对杨氏模量影响不大,但对纳米碳管的曲屈行为影响却相当显著。     

Axial buckling of multi-walled carbon nanotubes and nanopeapods

In this paper, we investigate both pre- and post-buckling behaviors of multi-walled carbon nanotubes and multi-walled carbon nanopeapods by incorporating into the applied forces of a prescribed beam equation both van der Waals interactions between the adjacent walls of the nanotubes and the interactions between the fullerenes and the inner wall of the nanotube. Two beam theories are employed. First, we utilize Donnell’s equilibrium equation to derive an axial stability condition for the multi-walled carbon nanotubes and multi-walled carbon nanopeapods. We then determine analytically the critical forces for single-walled and double-walled nanotubes and nanopeapods. Given the outer nanotube of a fixed radius, we observe that the critical force and strain derived from the axial buckling stability criterion decrease as a result of the molecular interactions between the adjacent layers of the nanotubes and the molecular interactions between the embedded fullerenes and the inner carbon nanotube, which is in agreement with existing literature. Next, we utilize an Euler–Bernoulli beam equation incorporating the curvature effect to obtain the post-buckled axial bending displacement for the multi-walled nanotubes and nanopeapods. We find that the interactions between molecules generate an inward force, which tends to resist any applied forces. While the inward force induced by the fullerenes to the inner wall of the nanotube vanishes as we increase the applied force, the inward force induced by the layers increases as the applied force increases. The main contribution of this paper is the incorporation of both van der Waals interactions and the curvature effect into prescribed beam theories to accurately measure the critical forces and the buckled displacements of multi-walled nanotubes and nanopeapods subject to a small external force. Our analysis is relevant to future nano devices, such as biological sensors and measuring devices for small forces arising from electrical charges or Casimir forces.     

DYNAMIC BUCKLING BEHAVIOR OF MULTI-WALLED CARBON NANOTUBES SUBJECTED TO STEP AXIAL LOADING

This paper studies the dynamic buckling behavior of multi-walled carbon nanotubes (MWNTs) subjected to step axial loading.A buckling condition is derived,and numerical results are presented for MWNTs u...     

Buckling of embedded multi-walled carbon nanotubes under combined torsion and axial loading

This paper describes an investigation into elastic buckling of an embedded multi-walled carbon nanotube under combined torsion and axial loading, which takes account of the radial constraint from the surrounding elastic medium and van der Waals force between two adjacent tube walls. Depending on the ratio of radius to thickness, the multi-walled carbon nanotubes discussed here are classified as thin, thick, and nearly solid. Critical buckling load with the corresponding mode is obtained for multi-walled carbon nanotubes under combined torsion and axial loading, with various values of the radius to thickness ratio and surrounded with different elastic media. The study indicates that the buckling mode (m, n) of an embedded multi-walled carbon nanotube under combined torsion and axial loading is unique and it is different from that with axial compression only. New features for the buckling of an embedded multi-walled carbon nanotube under combined torsion and axial loading and the meaningful numerical results are useful in the design of nanodrive device, nanotorsional oscillator and rotational actuators, where multi-walled carbon nanotubes act as basic elements.     

Postbuckling prediction of double-walled carbon nanotubes under axial compression

An elastic double-shell model is presented for the buckling and postbuckling of a double-walled carbon nanotube subjected to axial compression. The analysis is based on a continuum mechanics model in which each tube of a double-walled carbon nanotube is described as an individual elastic shell and the interlayer friction is negligible between the inner and outer tubes. The governing equations are based on the Karman–Donnell-type nonlinear differential equations. The van der Waals interaction between the inner and outer nanotubes and the nonlinear prebuckling deformations of the shell are both taken into account. A boundary layer theory of shell buckling is extended to the case of double-walled carbon nanotubes under axial compression. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. Numerical results reveal that the single-walled carbon nanotube and the double-walled carbon nanotube both have an unstable postbuckling behavior.     

Combined torsional buckling of multi-walled carbon nanotubes coupling with axial loading and radial pressures

This paper reports the results of an investigation on combined torsional buckling of multi-walled carbon nanotubes (MWNTs) under combined torque, axial loading and radial pressures based on the continuum mechanics model, which takes into account the effect of the van der Waals interaction between adjacent tubes. A buckling condition is derived for determining the critical buckling torque and associated buckling mode. In particular, for combined torsional buckling of double-walled carbon nanotubes, an explicit expression is obtained and some detailed results are demonstrated. According to the innermost radius-to-thickness ratio, MWNTs are classified into three types: thin, thick, and (almost) solid. Numerical results are worked out for the critical buckling torque and associated buckling mode for all the three types of MWNTs subjected to various axial stresses (axial tensile stresses or axial compressive stresses), internal pressures, and external pressures. It is shown that, the axial tensile stress or the internal pressure will make the MWNTs resist higher critical buckling torque, while the axial compressive stress or external pressure will lead to a lower critical buckling torque. The effect of axial stress (axial tensile stress or axial compressive stress) on the critical buckling torque of MWNTs is very small for all the three types of MWNTs, while the effect of the internal pressure or external pressure is related to the types of MWNTs, which is strong for the thin MWNTs, moderate for the thick MWNTs, and small for the solid MWNTs. Numerical results also indicate that, the associated buckling mode is unique and dependent on the structure of MWNTs. Especially, for combined torsional buckling of MWNTs with very small axial stress and radial pressures, the buckling mode is just the one for the corresponding pure torsional buckling.     

Buckling analysis of multi-walled carbon nanotubes: a continuum model accounting for van der Waals interaction

Explicit formulas are derived for the van der Waals (vdW) interaction between any two layers of a multi-walled carbon nanotube (CNT). Based on the derived formulas, an efficient algorithm is established for the buckling analysis of multi-walled CNTs, in which individual tubes are modeled as a continuum cylindrical shell. The explicit expressions are also derived for the buckling of double-walled CNTs. In previous studies by Ru (J. Appl. Phys. 87 (2000b) 7227) and Wang et al. (Int. J. Solids Struct. 40 (2003) 3893), only the vdW interaction between adjacent two layers was considered and the vdW interaction between the other two layers was neglected. The vdW interaction coefficient was treated as a constant that was not dependent on the radii of the tubes. However, the formulas derived herein reveal that the vdW interaction coefficients are dependent on the change of interlayer spacing and the radii of the tubes. With the increase of radii, the coefficients approach constants, and the constants between two adjacent layers are about 10% higher than those reported by Wang et al. (Int. J. Solids. Struct. 40 (2003) 3893). In addition, the numerical results show that the vdW interaction will lead to a higher critical buckling load in multi-walled CNTs. The effect of the tube radius on the critical buckling load of a multi-walled CNT is also examined.     

Instability of thermally induced vibrations of carbon nanotubes

The dynamical stability of carbon nanotubes embedded in an elastic matrix under time-dependent axial loading is studied in this paper. The effects of van der Waals interaction forces between the inner and outer walls of nanotubes are taken into account. Using continuum mechanics, we apply an elastic layered shell model to solve the transverse parametric vibrations of a carbon nanotube. Both the Gaussian wide-band axial temperature changes and physically realizable temperature changes with known probability distributions are assumed as the tube axial loading. The energy-like functionals are used in the stability analysis. The emphasis is placed on a qualitative analysis of dynamic stability problem. Stability domains in the space of geometric, material and loading parameters are presented in analytical forms.