Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

A water soluble Al(3+) selective colorimetric and fluorescent turn-on chemosensor and its application in living cell imaging

An efficient water soluble fluorescent Al(3+) receptor, 1-[[(2-furanylmethyl)imino]methyl]-2-naphthol (1-H) was synthesized and characterized by physico-chemical and spectroscopic tools along with single crystal X-ray crystallography. High selectivity and affinity of 1-H towards Al(3+) in HEPES buffer (DMSO/water: 1/100) of pH 7.4 at 25 °C showed it to be suitable for detection of intracellular Al(3+) by fluorescence microscopy. Metal ions, viz. alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)), and transition-metal ions (Ni(2+), Zn(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Cr(3+/6+), Hg(2+)) and Pb(2+), Ag(+) did not interfere. The lowest detection limit for Al(3+) was calculated to be 6.03 × 10(-7) M in 100 mM HEPES buffer (DMSO/water: 1/100). Theoretical calculations have also been included in support of the configuration of the probe-aluminium complex.     

An iminocoumarin-Cu(II) ensemble-based chemodosimeter toward thiols

An 'ensemble'-based fluoregenic chemodosimeter 1-Cu(II) for detection of thiols is reported. Complex 1-Cu(II) sensitively senses thiols followed by hydrolysis to give a marked fluorescence enhancement over other amino acids at pH 7.4 under aqueous media. Confocal microscopic imaging of complex 1-Cu(II) is also herewith demonstrated for cellular thiol detection in HepG2 cells.     

A fluorescence turn-on sensor for iodide based on a thymine-Hg(II)-thymine complex

Iodide plays a vital role in many biological processes, including neurological activity and thyroid function. Due to its physiological relevance, a method for the rapid, sensitive, and selective detection of iodide in food, pharmaceutical products, and biological samples such as urine is of great importance. Herein, we demonstrate a novel and facile strategy for constructing a fluorescence turn-on sensor for iodide based on a T-Hg(II)-T complex (T=thymine). A fluorescent anthracene-thymine dyad (An-T) was synthesized, the binding of which to a mercury(II) ion lead to the formation of a An-T-Hg(II)-T-An complex, thereby quenching the fluorescent emission of this dyad. In this respect, the dyad An-T constituted a fluorescence turn-off sensor for mercury(II) ions in aqueous media. More importantly, it was found that upon addition of iodide, the mercury(II) ion was extracted from the complex due to the even stronger binding between mercury(II) ions and iodide, leading to the release of the free dyad and restoration of the fluorescence. By virtue of this fluorescence quenching and recovery process, the An-T-Hg(II)-T-An complex constitutes a fluorescence turn-on sensor for iodide with a detection limit of 126 nM. Moreover, this sensor is highly selective for iodide over other common anions, and can be used in the determination of iodide in drinking water and biological samples such as urine. This strategy may provide a new approach for sensing some other anions.     

A new turn-on fluorescence probe for Zn in aqueous solution and imaging application in living cells

We designed and synthesized a new pyrazoline-based turn-on fluorescence probe for Zn²⁺ by the reaction of chalcone and thiosemicarbazide. The structure of the probe was characterized by IR, NMR and HRMS spectroscopy. The probe (L) exhibits high selectivity and sensitivity for detecting Zn²⁺ in buffered EtOH/HEPES solution (EtOH/HEPES = 1/1, pH 7.2) with 80-fold fluorescence enhancement, which is superior to previous reports. Job’s plot analysis revealed 1:1 stoichiometry between probe L and Zn²⁺ ions. The association constant estimated by the Benesi–Hildebrand method and the detection limit were 3.92 × 10³ M⁻¹ and 5.2 × 10⁻⁷ M, respectively. A proposed binding mode was confirmed by ¹H NMR titration experiments and density functional theory (DFT) calculations. The probe is cell-permeable and stable at the physiological pH range in biological systems. Because of its fast response to Zn²⁺, the probe can monitor Zn²⁺ in living cells. Moreover, the selective binding of L and Zn²⁺ was reversible with the addition of EDTA in buffered EtOH/HEPES solution and Zn²⁺ could be imaged in SH-SY5Y neuron cells.     

A BODIPY-based colorimetric and fluorometric chemosensor for Hg(II) ions and its application to living cell imaging

A new monostyryl boron dipyrromethene derivative (MS1) appended with two triazole units indicates the presence of Hg(2+) among other metal ions with high selectivity by color change and red emission. Upon Hg(2+) binding, the absorption band of MS1 is blue-shifted by 29 nm due to the inhibition of the intramolecular charge transfer from the nitrogen to the BODIPY, resulting in a color change from blue to purple. Significant fluorescence enhancement is observed with MS1 in the presence of Hg(2+); the metal ions Ag(+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(2+), Fe(3+), K(+), Mg(2+), Mn(2+), Ni(2+), Pb(2+), and Zn(2+) cause only minor changes in the fluorescence of the system. The apparent association constant (K(a)) of Hg(2+) binding in MS1 is found to be 1.864 × 10(5) M(-1). In addition, fluorescence microscopy experiments show that MS1 can be used as a fluorescent probe for detecting Hg(2+) in living cells.     

A colorimetric and ratiometric fluorescent turn-on fluoride chemodosimeter and application in live cell imaging: high selectivity via specific SiO cleavage in semi aqueous media and prompt recovery of ESIPT along with the X-ray structures

A ratiometric fluorescent turn-on probe for fluoride ion, based on modulation of the excited-state intramolecular proton transfer (ESIPT) process by chemodosimetric desilylation pathway is reported. The probe SNBT (silyl protected hydroxynaphthalene benzothiazole moiety) shows a significant increase of ratiometric absorption band at 440 nm and emission band at 477 nm by the deprotection of fluoride mediated silyl bond cleavage in CH₃CN–H₂O (8/2, v/v, 25 °C). The test strips based on SNBT and F⁻ are fabricated, which can act as a convenient and efficient F⁻ test kits. Furthermore, the biological application shows that it can be very useful as a selective fluoride probe in the fluorescence imaging of living cells.     

A turn-on chemosensor for Hg2+ in aqueous media and its application in "MCT" imaging in living cells

A turn-on chemosensor L1, which exhibits high selectivity and sensitivity toward Hg(2+) over other common metal ions in aqueous media under a physiological pH window via a 1:1 binding mode, had been synthesized and characterized. L1 provides good fluorescent imaging of Hg(2+) in living cells. Particularly, we adopted the "micro computed tomography (MCT)" technology, successfully demonstrating the method of Hg(2+) sensing by L1 in cell lines, also the cell permeability of L1 and its imaging position in the cells.     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

Photoswitchable fluorescent diarylethene in a turn-on mode for live cell imaging

A new diarylethene-derived photochromic compound, with little cytotoxicity, plasma membrane-permeability, and efficient photoswitchability in cells upon alternative UV and visible light irradiation, was synthesized and applied to live cell imaging.     

A colorimetric and fluorescent turn-on chemosensor for Al and its application in bioimaging

The sensing properties of a boron dipyrromethene derivative 1 containing a N,N-(dimethylamino)styryl group at its α-position and an aniline moiety at meso-position were investigated by steady-state UV-vis absorption and fluorescence spectroscopy, which were found to exhibit wavelength ratiometric and large fluorescence enhancement in the presence of Al³⁺ with specific selectivity over other metal ions in aqueous media. Furthermore, confocal fluorescence microscopy experiments demonstrated that 1 could be used as a fluorescent probe for Al³⁺ in living cells.     

Linear Schiff-base fluorescence probe with aggregation-induced emission characteristics for Al detection and its application in live cell imaging

A simple Schiff-base derivative with salicylaldehyde moieties as fluorescent probe 1 was reported by aggregation-induced emission (AIE) characterization for the detection of metal ions. Spectral analysis revealed that probe 1 was highly selective and sensitive to Al³⁺. The probe 1 was also subject to minimal interference from other common competitive metal ions. The detection limit of Al³⁺ was 0.4 μM, which is considerably lower than the World Health Organization standard (7.41 μM), and the acceptable level of Al³⁺ (1.85 μM) in drinking water. The Job's plot and the results of ¹H-NMR and FT-IR analyses indicated that the binding stoichiometry ratio of probe 1 to Al³⁺ was 1:2. Probe 1 demonstrated a fluorescence-enhanced response upon binding with Al³⁺ based on AIE characterization. This response was due to the restricted molecular rotation and increased rigidity of the molecular assembly. Probe 1 exhibited good biocompatibility, and Al³⁺ was detected in live cells. Therefore, probe 1 is a promising fluorescence probe for Al³⁺ detection in the environment.     

A fluorescent "turn-on" probe for the dual-channel detection of Hg(II) and Mg(II) and its application of imaging in living cells

A novel rhodamine-based fluorescent chemosensor (RND) was synthesized that contains two independent fluorophores and acts as a very sensitive, selective and reversible off-on probe for Hg(II). Importantly, this newly developed sensing system exhibited different fluorescent responses toward Hg(II) and Mg(II) at 589 nm and 523 nm, respectively. RND also displayed detectable color change upon treatment with Hg(II). Results from confocal laser scanning microscopy experiments demonstrated that this chemosensor is cell permeable and can be used as a fluorescent probe for monitoring Hg(II) or Mg(II) in living cells. This probe can also indirectly detect glutathione (GSH) and cysteine (Cys) with good linear relationships.     

A colorimetric probe for the selective naked-eye detection of Pb(II) ions in aqueous media

A new colorimetric molecular probe based on a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dye selectively binds Pb(II) ions in aqueous solutions, allowing for highly sensitive naked-eye detection.     

Rhodamine-based highly sensitive colorimetric off-on fluorescent chemosensor for Hg2+ in aqueous solution and for live cell imaging

A novel rhodamine-based highly sensitive and selective colorimetric off-on fluorescent chemosensor for Hg(2+) ions is designed and prepared by using the well-known thiospirolactam rhodamine chromophore and furfural hydrazone as signal-reporting groups. The photophysical characterization and Hg(2+)-binding properties of sensor RS1 in neutral N, N-dimethylformamide (DMF) aqueous solution are also investigated. The signal change of the chemosensor is based on a specific metal ion induced reversible ring-opening mechanism of the rhodamine spirolactam. The response of the chemosensor for Hg(2+) ions is instantaneous and reversible. And it successfully exhibits a remarkably "turn on" response toward Hg(2+) over other metal ions (even those that exist in high concentration). Moreover, this sensor is applied for in vivo imaging in Rat Schwann cells to confirm that RS1 can be used as a fluorescent probe for monitoring Hg(2+) in living cells with satisfying results, which further demonstrates its value of practical applications in environmental and biological systems.     

A highly selective fluorescence sensor for Tin (Sn(4+)) and its application in imaging live cells

A naphthalimide-rhodamine B derivative was synthesized as a fluorescence turn-ON chemodosimeter for Sn(4+). A colour change and marked enhancement of fluorescence was found in the presence of Sn(4+), Cu(2+) and Cr(3+) due to the ring open reaction of rhodamine and a fluorescence resonance energy transfer process. Addition of the strong chelating agent ethylenediaminetetraacetic acid disodium salt (EDTA) partly released the cation from the complex with Sn(4+) and restored the yellow fluorescence. In addition, the compound can be used as a fluorescent probe for Sn(4+) in biological systems and may act as a tool with which to study the physiological functions of tin or pathogenesis in the human body.     

Development of a boron-dipyrromethene-Cu ensemble based colorimetric probe toward hydrogen sulfide in aqueous media

A boron-dipyrromethene-Cu²⁺ ensemble based colorimetric probe for detection of hydrogen sulfide in aqueous media is reported. Complex 1-Cu(II) is able to selectively sense hydrogen sulfide over other anions and thiols followed by the release of compound 1 to give a remarkable change of UV absorption in aqueous solution (HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) buffer, 50 mM, pH 7.4, 5% DMSO).     

Selective colorimetric sensing of Co(II) in aqueous media with a spiropyran-amide-dipicolylamine linkage under UV irradiation

A spiropyran-amide-dipicolylamine linkage behaves as a colorimetric receptor for selective Co(2+) sensing in aqueous media under UV irradiation. This is promoted by strong coordination of Co(2+) with amide oxygens of the receptors and efficient photoisomerization of the spiropyran moieties.     

A highly selective and sensitive fluorescence "turn-on" probe for Ag+ in aqueous solution and live cells

A naphthalimide-based fluorescent probe, NPQ, that contains a novel receptor was successfully developed. NPQ exhibited "turn-on" fluorescence and excellent selectivity toward Ag(+) in the presence of various other metal ions in aqueous solution. A series of control compounds were designed and synthesized in order to explore the photoinduced electron transfer (PET) quenching mechanism of NPQ and binding mode of NPQ with Ag(+). Moreover, with the NPQ-Ag(+) complex, I(-) was easily selectively recognized by a marked fluorescence quenching. The live cell imaging experiments demonstrate that NPQ can be used as a fluorescent probe for monitoring Ag(+) in living cells.