Low eccentricity elliptical fibers with helical windings under slow-wave consideration—Some special cases

Analytical investigation of the lightwave propagation through dielectric elliptical fibers with conducting helical windings on the core-clad boundary is presented under the consideration of slow-wave approximation. The analysis essentially requires the use of elliptical coordinate system. Mathieu and the modified Mathieu functions are used as the representatives of the electromagnetic fields within the structure. Field components in the different sections of the guide are presented, and the characteristic dispersion relations for the system are deduced for 0° and 90° pitch angles. The investigation reveals that the pitch angle has ultimately no effect on the dispersion relations for their selected values. The effect of core ellipse eccentricity on the dispersion characteristics is presented for two different operating wavelengths, and considering different values of the core major axis length.     

A theoretical study of the modal dispersion characteristics of an annular circular waveguide with helical winding as the outer cladding

In this present communication, we introduce a new type of annular optical waveguide whose outer cladding is made of sheath helix. The sheath helix is made up of the dielectric material of lower refractive index than the core materials. Using vector approach, the general characteristic equation for the proposed waveguide has been derived. The modal dispersion characteristics for the lowest-order modes for different pitch angles are determined and analyzed. We observe that there is no effect of pitch angles on dispersion curve nearly up to 89° but drastic change is observed at 90° and above pitch angle. On comparison of helically inner cladded annular circular waveguide, we have found that there is not the existence of the negative dispersion curve and photonic band gap in the helically outer cladded annular circular waveguide. It means only the inner cladding is responsible for the negative dispersion as well as photonic band gap. There is no effect of the outer cladding.     

An analytical algorithm for the evaluation of two-electron integrals in diatomics: A test calculation with an elliptical basis set

A purely analytical method designed to compute the two-electron integrals that appear in anab-initio calculation of the electronic structures of diatomic molecules using elliptical basis set is presented. Test calculations are successfully carried out on LiH molecule.     

Influence of the atomic order on the magnetic characteristics of a Ni–Mn–Ga ferromagnetic shape memory alloy

The influence of the atomic order on the magnetic properties has been analyzed in a polycrystalline Ni_49.5Mn_28.5Ga₂₂ ferromagnetic shape memory alloy prepared by arc melting under Ar atmosphere. Different thermal treatments have been performed to modify the order degree of the alloy. The effect of the different thermal treatments on the magnetic and structural characteristics has been analyzed by superconducting quantum interference device (SQUID) and differential scanning calorimetry (DSC) measurements. The magnetic and structural properties of the alloys are modified as a consequence of the atomic order change. The martensitic transformation temperatures increase as long as the order degree increases. On the other side, the Curie temperature and magnetization saturation also reflect the order degree of the alloy but seems to be linked to the particular order of the Mn sub-lattice.     

Judd–Ofelt treatment on luminescence of europium complexes with β-diketone and bis(β-diketone)

Eu(DBM)₃2H₂O and Eu₂(DDBM)₃H₂O were synthesized by reactions between EuCl₃ and chelating regents of β-diketone (dibenzoylmethane, HDBM) and bis(β-diketone) (1,3-bis(3-phenyl-3-oxopropanoyl)benzene, H₂DDBM), respectively, and their luminescence properties were investigated by the fluorescence spectra and metastable state decay spectra. It was found that the relative intensity ratio of ⁵D₀→⁷F₂ to ⁵D₀→⁷F₁transition and the radiative lifetime shows a little change attributing to the different symmetry of europium ions, which Ω₂ of Eu complexes with β-diketone and bis(β-diketone) are 13.08 and 12.24, respectively. Moreover, it was also found that the metastable state lifetime of Eu₂(DDBM)₃H₂O is much longer than that of Eu(DBM)₃2H₂O, due to smaller water quenching and lower triplet level of ligands. The Commission Internacionale d’Éclairage (CIE) chromaticity coordinates calculated from emission spectrum are x=0.637 and y=0.343 for Eu₂(DDBM)₃H₂O, which presents high red color purity near 100%.     

Deposition of lead iodide films on Rh(1 0 0) electrodes from colloidal solutions––the effect of an iodine adlayer

The growth of PbI₂ precipitates on single crystal substrates from colloidal solutions has been investigated with in air scanning tunneling microscopy and synchrotron-based X-ray photoelectron spectroscopy. The PbI₂ growth on Rh(1 0 0) results in nano-clusters with lateral dimensions between 30 and 60 Å, consistent with earlier reports. However, the growth of PbI₂ on a well-ordered iodinated Rh(1 0 0), denoted as (√2×√2)R45°-I, leads to atomically smooth PbI₂ films having a hexagonal symmetry with lattice constant identical to the bulk value of 4.5 Å. The heteroepitaxy is believed to be effected by the atomic iodine monolayer that helps to accommodate large lattice mismatch between PbI₂ and Rh surface with short-range van der Waals interaction.     

Investigation of contact lithography in the 5–20 nm region with a laser plasma source

In this paper, we present experiments of extreme ultraviolet (EUV) contact lithography based on a compact laser-produced plasma (LPP) and investigated the radiation of the plasma from Cu, Fe, W targets. We measured the depth of development of a polychlorinated methylstyrene (PCMS) resist exposed through a 100 I mm⁻¹ Cu net for times ranging from 10 to 40 minutes using different targets.     

Influence of dietary fibre on gluten proteins structure – a study on model flour with application of FT‐Raman spectroscopy

Dietary fibres are regarded as the source of polysaccharides and antioxidants such as polyphenols. However, addition of dietary fibre to bread causes significant reduction in its quality. The bread quality is connected with the structure of gluten proteins. For this reason, Fourier transform Raman spectroscopy was applied to determine changes in structure of gluten proteins modified by seven dietary fibres. The fibres were added to model flour reconstituted with wheat gluten and wheat starch. The model flour was used to provide gluten proteins of definite structure. The obtained results showed that six out of seven fibres caused similar changes in β‐turn structures. The appearance of the band at 1642 cm⁻¹ and the shift toward lower wavenumbers of the band at 1670 cm⁻¹ in the difference spectra indicated hydrogen bonding of carbonyl groups in β‐turns leading to protein folding/aggregation. Addition of fibre preparations caused also changes in conformation of disulfide bridges (S–S), corresponding to transformation to trans‐gauche‐gauche and trans‐gauche‐trans conformations at the expense of the stable gauche‐gauche‐gauche conformation. The S–S bonds in less stable conformations were formed inside the protein complex as well as between protein complexes in the form of β‐structures. Generally, the observed changes in gluten proteins after addition of dietary fibres were results of interactions between fibre polysaccharides and gluten proteins rather than between polyphenols and gluten proteins. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface structure analysis based on the exclusive use of the specular LEED spot – a theoretical study

The exclusive use of the specularly reflected beam (the (0,0) spot) may be a more practical way of collecting data for a LEED I–V structure analysis under certain experimental conditions. In this paper we discuss the special properties of the (0,0) spot intensity and test its sensitivity towards structural changes for the model system CO/Ni(1 1 1) within the framework of a R factor analysis. It is found that the (0,0) spot can, indeed, be used for a reliable structure determination if the energy range is increased by collecting data at different polar and azimuthal angles of incidence. The R factor contrast is, however, reduced with respect to a conventional LEED I–V analysis.     

Fabrication of 6,13‐bis(triisopropyl‐silylethynyl)–pentacene thin‐film transistors with the silver ink transfer method using a polymer stamp

We fabricated 6,13‐bis(triisopropylsilylethynyl)–pentacene (TIPS–pentacene) thin film transistors using a direct metal transfer method. Using different metals, such as Au and Ag ink, electrode patterns are formed from the relief region of the polymer mold. TIPS–pentacene TFTs using the Ag ink transfer method show a similar performance to those using the Au metal transfer method. This method has advantages over the Au metal transfer method because it does not require vacuum equipment and a dry etching process. The self‐assembled monolayer (SAM) treated device exhibits a carrier mobility of 9.5 × 10^–2 cm²/V · s, and an on/off ratio of 4.6 × 10⁴. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical evidence on O–N type smiles rearrangement mechanism: a computational study on the intramolecular cyclization of N‐methyl‐2‐(2‐chloropyridin‐3‐yloxy)‐acetamide anion

Smiles rearrangement (SR) falls under a broad category of organic synthesis for many important compounds. A complete understanding toward SR process appeals to the assistance of theoretical research. Herein, by performing quantum chemistry calculations, we give a theoretical evidence for the mechanism of a representative O–N type SR, the intramolecular cyclization of N‐methyl‐2‐(2‐chloropyridin‐3‐yloxy)acetamide anion. It is found that the SR to the ipso‐position involves a two‐step mechanism and is energetically more favorable than the direct nucleophilic attack by N atom on the ortho‐position. The present result rationalizes well the experimentally observed ipso‐SR product and provides a consistent picture of the O–N SR process. Copyright © 2008 John Wiley & Sons, Ltd.     

Substituent effects on the reduction of 2–alkylcyclohexanones by LiAlH4: an investigation of conformational equilibria and transition states

Transition state (TS) structures for the reduction of 2‐Me and 2‐i‐Pr‐cyclohexanone by LiAlH₄ were optimized by density functional theory (B3LYP/6‐31G(d,p)). Four TS structures corresponding to axial and equatorial attacks by LiAlH₄ were located for each ketone conformer. Electronic potential maps were used to investigate the substituent electronic effect on the TS stabilization. The uneven carbonyl orbital distribution in the LUMO (π*) was also analyzed. Reduction stereoselectivity was shown to depend on both the ketone conformational ratio and on the reaction TS. Copyright © 2010 John Wiley & Sons, Ltd.     

The effects of self-fields on the electron trajectory in a two-stream free electron laser with a helical wiggler and an axial guiding magnetic field

A theory for the two-stream free-electron laser(TSFEL) with a helical wiggler and an axial guide magnetic field is developed.In the analysis,the effects of self-fields are taken into account.An analysis of the two-stream steady-state electron trajectories is given by solving the equation of motion.Numerical calculations show that there are seven groups of orbits in the presence of self-fields instead of two groups reported in the absence of self-fields.The stability of the trajectories is studied numerically.     

On the propagation of linear transverse acoustic waves in isotropic media with mechanical relaxation phenomena due to viscosity and a tensorial internal variable: II. Some cases of special interest (Poynting-Thomson,Jeffreys, Maxwell,Kelvin-Voigt,Hooke and Newton media)

The propagation of linear transverse acoustic waves in isotropic media in which mechanical relaxation phenomena occur was considered in a previous paper. In particular expressions for the velocity and attenuation of the waves were obtained and the limiting cases of waves with high and low frequencies were discussed. In the present paper we investigate the propagation of linear transverse acoustic waves in Poynting-Thomson, Jeffreys, Maxwell, Kelvin-Voigt, Hooke and Newton media. We show that the dispersion relations for these waves may be considered as degeneracies of the dispersion relation which we derived in the general case of a viscoanelastic medium with memory. In particular we investigate the explicit dependence of the dispersion relations on the thermodynamic parameters and the phenomenological coefficients.     

An experimental investigation of substituent effects on the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones: a kinetic study

The effect of different substituents on the kinetics of the reactions between 2‐amino‐benzamide and some of benzaldehyde derivatives have been spectrally investigated in the presence of formic acid. The proposed mechanism were challenged due to the determination of rate‐determining step (RDS) and also, to obtain the general rate law of the reaction. For all substituents, the reactions followed the second‐order kinetics and the partial orders of reactions were recognized with respect to each reactant. Electron withdrawing substituents on benzaldehyde ring increased the rate of reaction. Kinetic values (k and E_a) and associated activation parameters (ΔH^?, ΔG^? and ΔS^?) of the reactions were determined. Both the Arrhenius and the Eyring equations were used to calculate activation energy. Comparison of magnitude of and T showed that the reactions were enthalpy controlled. Isokinetic plots for the reactions were plotted and linear relationship between and recognized that relative contribution of enthalpy and entropy to the overall free energy was the same in the reactions.     

Effect of amino acid modifications on the molecular structure of adsorbed and nonadsorbed bombesin 6–14 fragments on an electrochemically roughened silver surface

This work used infrared absorption and Raman spectroscopy to determine the structure of seven modified fragments (residues 6–14 of the polypeptide chain) of bombesin (BN^6–14). The peptides studied are cyclo[D ‐Phe⁶, His⁷, Leu¹⁴]BN^6–14, [D ‐Phe⁶, Leu‐NHEt¹³, des‐Met¹⁴]BN^6–14, [D ‐Phe⁶, Leu¹³‐®‐p‐chloro‐Phe¹⁴]BN^6–14, [D ‐Phe⁶, β‐Ala¹¹, Phe¹³, Nle¹⁴]BN^6–14, [D ‐Tyr⁶, β‐Ala¹¹, Phe¹³, Nle¹⁴]BN^6–14, [D ‐Tyr⁶, β‐Phe¹¹, Phe¹³, Nle¹⁴OH]BN^6–14 and [D ‐Cys⁶, Asn⁷, D ‐Ala¹¹, Cys¹⁴]BN^6–14. These peptides are potent bombesin agonists useful in the treatment of tumors. Surface‐enhanced Raman scattering (SERS) spectroscopy was also used to examine the behavior of these molecules on an electrochemically roughened silver surface. The SERS spectra reveal that substituting native amino acids in these molecules with synthetic ones changes their adsorption state slightly on an electrochemically roughened surface of silver. The peptides [D ‐Tyr⁶, β‐Ala¹¹, Phe¹³, Nle¹⁴]BN^6–14 and [D ‐Tyr⁶, β‐Phe¹¹, Phe¹³, Nle¹⁴OH]BN^6–14 tend to adsorb strongly on this surface via C fragment (∼1400 cm⁻¹). The observed medium enhancement of the Trp⁸ residue and amide bond Raman signals indicate further interactions between these fragments and the surface. [D ‐Phe⁶, Leu‐NHEt¹³, des‐Met¹⁴]BN^6–14 and [D ‐Cys⁶, Asn⁷, D ‐Ala¹¹, Cys¹⁴]BN^6–14 are shown to be coordinated to the silver through  CONH , CO, and the indole ring. The strongest SERS bands (∼1506, ∼1275, ∼1149, and ∼1007 cm⁻¹) of [D ‐Phe⁶, Leu¹³‐®‐p‐chloro‐Phe¹⁴]BN^6–14 and [D ‐Phe⁶, β‐Ala¹¹, Phe¹³, Nle¹⁴]BN^6–14 suggest that these two peptides bind to the silver via Trp⁸ and  CONH . In the case of cyclo[D ‐Phe⁶, His⁷, Leu¹⁴]BN^6–14, the formation of a peptide/Ag complex is confirmed by the strong SERS bands involving Trp⁸ and  CONH vibrations, which are accompanied by a SERS signal due to the CO vibrations. For these analogs, the relative potency for inhibition of binding of ¹²⁵I‐[Tyr⁴]BN to rat pancreas acini cells was correlated with the behavior of the amide bond on the silver surface, while the contribution of the structural components to the ability to interact with the rGRP‐R was correlated with the SERS patterns. Copyright © 2008 John Wiley & Sons, Ltd.