Hydrogen Peroxide Enhances the Antibacterial Effect of Methylene Blue‐based Photodynamic Therapy on Biofilm‐forming Bacteria

Recently, increased attention has been focused on endoscopic disinfection after outbreaks of drug‐resistant infections associated with gastrointestinal endoscopy. The aims of this study were to investigate the bactericidal efficacy of methylene blue (MB)‐based photodynamic therapy (PDT) on Pseudomonas aeruginosa (P. aeruginosa), which is the major cause of drug‐resistant postendoscopy outbreak, and to assess the synergistic effects of hydrogen peroxide addition to MB‐based PDT on biofilms. In planktonic state of P. aeruginosa, the maximum decrease was 3 log₁₀ and 5.5 log₁₀ at 20 and 30 J cm^?2, respectively, following MB‐based PDT. However, the maximum reduction of colony forming unit (CFU) was decreased by 2.5 log₁₀ and 3 log₁₀ irradiation on biofilms. The biofilm formation was significantly inhibited upon irradiation with MB‐based PDT. When the biofilm state of P. aeruginosa was treated with MB‐based PDT with hydrogen peroxide, the CFU was significantly decreased by 6 log₁₀ after 20 J cm^?2, by 7 log₁₀ after 30 J cm^?2 irradiation, suggesting significantly higher efficacy than MB‐based PDT alone. The implementation of the combination of hydrogen peroxide with MB‐based PDT through working channels might be appropriate for preventing early colonization and biofilm formation in the endoscope and postendoscopy outbreak.     

Linezolid and Vancomycin Decrease the Therapeutic Effect of Methylene Blue‐Photodynamic therapy in a Mouse Model of MRSA Bacterial Arthritis

We previously reported that photodynamic therapy (PDT) using intra‐articular methylene blue (MB) could be used to treat arthritis in mice caused by bioluminescent methicillin‐resistant Staphylococcus aureus (MRSA) either in a therapeutic or in a preventative mode. PDT accumulated neutrophils into the mouse knee via activation of chemoattractants such as inflammatory cytokines or chemokines. In this study, we asked whether PDT combined with antibiotics used for MRSA could provide added benefit in controlling the infection. We compared MB‐PDT alone, systemic administration of either linezolid (LZD) alone or vancomycin (VCM) alone or the combination of PDT with either LZD or VCM. Real‐time noninvasive imaging was used to serially follow the progress of the infection. PDT alone was the most effective, whereas LZD alone was ineffective and VCM alone showed some benefit. Surprisingly the addition of LZD or VCM reduced the therapeutic effect of PDT alone (P < 0.05). Considering that PDT in this mouse model stimulates neutrophils to be antibacterial rather than actively killing the bacteria, we propose that LZD and VCM might inhibit the activation of inflammatory cytokines without eradicating the bacteria, and thereby reduce the therapeutic effect of PDT.     

Extracellular Matrix Containing in vitro Three‐dimensional Tumor Models in Photodynamic Therapy‐related Research

Three‐dimensional (3D) tumor models have been intensively evaluated for their use in cancer research, and there is a strong rationale behind using 3D cell cultures in photodynamic therapy (PDT)‐related experimentation. In this contribution, it is explained why 3D cell cultures containing extracellular matrix (ECM) are preferred for this purpose. Results of experimental studies utilizing ECM‐containing 3D cellular models in PDT research are summarized. Finally, the design of in vitro 3D models that would provide clinically relevant information is discussed.     

Resistance of Human Butyrylcholinesterase to Methylene Blue‐Catalyzed Photoinactivation; Mass Spectrometry Analysis of Oxidation Products

Methylene blue, 3, 7‐bis(dimethylamino)‐phenothiazin‐5‐ium chloride, is a reversible inhibitor of human butyrylcholinesterase (BChE) in the absence of light. In the presence of light and oxygen, methylene blue promotes irreversible inhibition of human BChE as a function of time, requiring 3 h irradiation to inhibit 95% activity. Inactivation was accompanied by a progressive loss of Coomassie‐stained protein bands on native and denaturing polyacrylamide gels, suggesting backbone fragmentation. Aggregation was not detected. MALDI–TOF/TOF mass spectrometry identified oxidized tryptophan (W52, 56, 231, 376, 412, 490, 522), oxidized methionine (M81, 144, 302, 532, 554, 555), oxidized histidine (H214), oxidized proline (P230), oxidized cysteine (C519) and oxidized serine (S215). A 20 min irradiation in the presence of methylene blue resulted in 17% loss of BChE activity, suggesting that BChE is relatively resistant to methylene blue‐catalyzed photoinactivation and that therefore this process could be used to sterilize BChE preparations.     

Hiporfin‐Mediated Photodynamic Therapy in Preclinical Treatment of Osteosarcoma

This study was carried out to investigate the anti‐tumor effect and mechanism of hiporfin‐mediated photodynamic therapy (hiporfin‐PDT) in osteosarcoma. We found that hiporfin accumulated mainly in the cytoplasm of osteosarcoma cells in a time and concentration‐dependent manner. Hiporfin‐PDT inhibited the proliferation, induced apoptosis and produced cell cycle arrest at G2M in osteosarcoma cell lines. Hiporfin‐PDT increased the expression of cleaved‐caspase‐3, cleaved PARP‐1, Bax and RIP1 while it decreased the expression of Bcl‐2; in addition, low concentration of hiporfin increased LC3 conversion. Furthermore, cell death caused by hiporfin‐PDT could be rescued by Nec‐1 but not by Z‐VAD‐FMK. Production of reactive oxygen species was increased after hiporfin‐PDT. In vivo studies showed a significant decrease in tumor volume and weight after hiporfin‐PDT in all three tumor mouse models investigated (subcutaneous and orthotopic). Histological analysis showed widespread cell apoptosis and necrosis after treatment. Immunohistochemistry also showed upregulation of cleaved‐caspase‐3 and downregulation of Bcl‐2 after hiporfin‐PDT. These results indicate that hiporfin‐PDT exhibits a killing effect in osteosarcoma both in vitro and in vivo, which is associated with apoptosis and necroptosis, while autophagy plays a protective role. All these findings shed light on a potential future clinical use for hiporfin in the treatment of osteosarcoma.     

Blue‐shifted H‐bond in aromatic sulfines: An ab initio calculation

The intramolecular C? H···O?S H‐bond in the aromatic sulfines, HRC?S?O, was analyzed by NBO and QTAIM methods. The results of QTAIM analysis at the MP2/aug‐cc‐pVDZ level of theory show that the C? H···O?S H‐bond meets all the characteristics of an improper, blue shift hydrogen bond. NBO analysis at the MP2/6–31++G(d,p)//MP2/aug‐cc‐pVDZ level predicts a normal relationship between change of bond length and C? H rehybridization. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

聚乙二醇增敏亚甲蓝-四苯硼化钠离子缔合物荧光探针荧光猝灭法测定痕量蛋白质

在KH2PO4- Na2HPO4缓冲溶液中，离子缔合物[MB]+·[B(C6H5)4]–可发射强而稳定的荧光，牛血清蛋白（BSA）能使[MB]+·[B(C6H5)4]–的荧光信号显著猝灭，聚乙二醇(PEG)对荧光信号猝灭的有强的增敏作用，加PEG比不加PEG时，ΔF（= F0－F，其中，F0与F分别为试剂空白和试液的荧光强度）值提高了9.1倍，且ΔF与BSA含量具有良好的线性关系，据此建立了新型荧光探针荧光猝灭法测定痕量蛋白质的新方法。本方法的线性范围为0.11 ~ 88.0 ag/mL，检出限：22.0 ag /mL BSA，灵敏度很高，并成功用于人血清样品中蛋白含量的测定。同时探讨了新方法的反应机理。在相同条件下，新方法可分别测定BSA、人血清白蛋白(human serum albumin，HAS)、卵蛋白(ovalbumin，OVA )、γ-球蛋白(γ-globulin，γ-G)及血清、脑脊液样品中蛋白质总量。     

Catalytic Spectrophotometric Determination of Titanium(IV) Using Methylene Blue‐Ascorbic Acid Redox Reaction

A highly selective and sensitive catalytic method for the determination of trace amounts of titanium(IV) was developed. The method is based on the catalytic effect of titanium(IV) on the methylene blue‐ascorbic acid redox reaction. The reaction was followed spectrophotometrically by measuring the change in absorbance of methylene blue at 665 nm, 5 minutes after the initiation of the reaction. In this study experimental parameters were optimized and the effect of the presence of various cations and some anions on the determination of titanium(IV) was examined. The calibration graph was linear in the range of 3‐25 ng mL^?1 of titanium(IV). The relative standard deviation for the determination of 10 and 20 ng mL^?1 of titanium(IV) were 2.64% and 1.51%, respectively (n = 8). The detection limit calculated from three times of standard deviation of blank 3S_b was 0.6 ng mL^?1. The method was successfully applied to the determination of titanium(IV) in tap water and ore samples.     

Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

A Simple Layer‐by‐Layer Assembly Strategy for a Reagentless Biosensor Based on a Nanocomposite of Methylene Blue‐Multiwalled Carbon Nanotubes

A simple layer‐by‐layer (LBL) assembly strategy was established for constructing a novel reagentless biosensor based on a nanocomposite of methylene blue multiwalled carbon nanotubes (MB‐MWNTs). A nanocomposite of MB‐MWNTs was obtained by direct premixing and possessed good dispersion in barbital‐HCl buffer. Through electrostatic interactions, the nanocomposite of MB‐MWNTs could alternately be assembled with horseradish peroxidase (HRP) on the Au electrode modified with precursor films. UV/Vis spectra and scanning electron microscopy (SEM) were applied to reveal the formation of the nanocomposite of MB‐MWNTs. The LBL assembly process was also verified by electrochemical impedance spectroscopy (EIS). The MB is a well‐established mediator and efficiently facilitated the electron shuttle between the HRP and the electrode, as demonstrated by the cyclic voltammetry (CV) measurements. The as‐prepared reagentless biosensor exhibited a fast response for the determination of hydrogen peroxide (H₂O₂) and reached 95% of the steady‐state current within 3 s. It was found that the linear response range of the reagentless biosensor for H₂O₂ was from 4.0 μM to 3.78 mM with a detection limit of 1.0 μM and a sensitivity of 22.5 μA mM⁻¹. The biosensor exhibited a high reproducibility and stability.     

Direct Photocontrol of Peptidomimetics: An Alternative to Oxygen‐Dependent Photodynamic Cancer Therapy

Conventional photodynamic treatment strategies are based on the principle of activating molecular oxygen in situ by light, mediated by a photosensitizer, which leads to the generation of reactive oxygen species and thereby causes cell death. A diarylethene‐derived peptidomimetic is presented that is suitable for photodynamic cancer therapy without any involvement of oxygen. This light‐sensitive molecule is not a mediator but is itself the cytotoxic agent. As a derivative of the cyclic amphiphilic peptide gramicidin S, the peptidomimetic exists in two thermally stable photoforms that are interconvertible by light of different wavelengths. The isomer generated by visible light shows much stronger toxicity against tumor cells than the UV‐generated isomer. First in vivo applications are demonstrated on a tumor animal model to illustrate how the peptidomimetic can be administered in the less toxic form and then activated locally in a solid tumor by visible light.     

Antitumor Effect of Sinoporphyrin Sodium‐Mediated Photodynamic Therapy on Human Esophageal Cancer Eca‐109 Cells

The aim of this study was to evaluate the photodynamic effect of Sinoporphyrin sodium (DVDMS). In this study, Eca‐109 cells were treated with DVDMS (5 μg mL^?1) and subjected to photodynamic therapy (PDT). The uptake and subcellular localization of DVDMS were monitored by flow cytometry and confocal microscopy. The phototoxicity of DVDMS was studied by MTT assay. The morphological changes were observed by scanning electron microscopy (SEM). DNA damage, reactive oxygen species (ROS) generation and mitochondria membrane potential (MMP) changes were analyzed by flow cytometry. Studies demonstrated maximal uptake of DVDMS occurred within 3 h, with a mitochondrial subcellular localization. MTT assays displayed that DVDMS could be effectively activated by light and the phototoxicity was much higher than photofrin under the same conditions. In addition, SEM observation indicated that cells were seriously damaged after PDT treatment. Furthermore, activation of DVDMS resulted in significant increases in ROS production. The generated ROS played an important role in the phototoxicity of DVDMS. DVDMS‐mediated PDT (DVDMS‐PDT) also induced DNA damage and MMP loss. It is demonstrated that DVDMS‐mediated PDT is an effective approach on cell proliferation inhibition of Eca‐109 cells.     

Effectiveness of the Photoactive Dye Methylene Blue versus Caspofungin on the Candida parapsilosis Biofilm in vitro and ex vivo

This research studied the effectiveness of the photoactive compound methylene blue (MB) activated with red LED light (576–672 nm) compared to that of caspofungin (CAS) on 1 Candida albicans and 3 Candida parapsilosis strains. Results were evaluated in terms of SMIC₅₀ for CAS or in PDI (photodynamic inactivation)‐SMIC₅₀ for MB (minimal inhibitory concentration inhibiting sessile biofilm to 50% in comparison to the control without CAS or after irradiation in comparison to the control without MB). While all strains were susceptible to CAS in planktonic form, the SMIC₅₀ was determined to be >16 μg mL^?1 when CAS was added to a 24 h biofilm. However, PDI‐MIC_50s (1.67 mW cm^?2, fluence 15 J cm^?2) were 0.0075–0.03 mmol L^?1. For biofilm, PDI‐SMIC_50s were in the range from 0.7 to 1.35 mmol L^?1. MB concentration of 1 mmol L^?1 prevented a biofilm being formed ex vivo on mouse tongues after irradiation regardless of the application time, in contrast to CAS, which was only effective at a concentration of 16 μg mL^?1 when it was added at the beginning of biofilm formation. PDI seems to be a promising method for the prevention of microbial biofilms that do not respond significantly to conventional drugs.     

Copper(I) Bromide: An Alternative Emitter for Blue‐Colored Flame Pyrotechnics

Copper(I) bromide was evaluated as an alternative emitter for blue flame pyrotechnic compositions. CuBr and CuCl emission spectra were recorded from a butane torch flame and compared. Cu(BrO₃)₂ was synthesized and used in pyrotechnic compositions as an oxidizer and the source for the generation of CuBr species. Pyrotechnic compositions, which contained copper and potassium bromates as oxidizers, were optimized for the generation of blue flames. The experimental data, including emission spectra of the flames, chromaticity coordinates, burning rates, luminous intensities, and sensitivity tests, were analyzed and compared.     

Enzyme‐Mediated Site‐Specific Bioconjugation of Metal Complexes to Proteins: Sortase‐Mediated Coupling of Copper‐64 to a Single‐Chain Antibody

The enzyme‐mediated site‐specific bioconjugation of a radioactive metal complex to a single‐chain antibody using the transpeptidase sortase A is reported. Cage amine sarcophagine ligands that were designed to function as substrates for the sortase A mediated bioconjugation to antibodies were synthesized and enzymatically conjugated to a single‐chain variable fragment. The antibody fragment scFv_anti‐LIBS targets ligand‐induced binding sites (LIBS) on the glycoprotein receptor GPIIb/IIIa, which is present on activated platelets. The immunoconjugates were radiolabeled with the positron‐emitting isotope ⁶⁴Cu. The new radiolabeled conjugates were shown to bind selectively to activated platelets. The diagnostic potential of the most promising conjugate was demonstrated in an in vivo model of carotid artery thrombosis using positron emission tomography. This approach gives homogeneous products through site‐specific enzyme‐mediated conjugation and should be broadly applicable to other metal complexes and proteins.     

Ultrasound‐Mediated Synthesis of Novel 1,2,3‐Triazole‐Based Pyrazole and Pyrimidine Derivatives as Antimicrobial Agents

In the development of novel antimicrobial agents, we synthesized novel 1,2,3‐triazole‐based pyrazole and pyrimidine derivatives 6 ( a–f ) and 7 ( a–f ) by ultrasound‐assisted method. The synthesized compounds were characterized by IR, ¹H NMR, ¹³C NMR, MS, and elemental analysis. All compounds were assessed in vitro for their efficacy as antimicrobial agents against four bacteria (Staphylococcus aureus , Bacillus subtilis , Escherichia coli , and Pseudomonas aeruginosa ) and two fungi (Candida albicans and Aspergillus niger ). In particular, compounds 6a , 6e , 7a , 7c , and 7e exhibited highly potent antimicrobial activity.     

Antimicrobial Photodynamic Efficiency of Novel Cationic Porphyrins towards Periodontal Gram‐positive and Gram‐negative Pathogenic Bacteria

The Gram‐negative Aggregatibacter actinomycetemcomitans and Fusobacterium nucleatum are major causative agents of aggressive periodontal disease. Due to increase in the number of antibiotic‐resistant bacteria, antimicrobial Photodynamic therapy (aPDT) seems to be a plausible alternative. In this work, photosensitization was performed on Gram‐positive and Gram‐negative bacteria in pure culture using new‐age cationic porphyrins, namely mesoimidazolium‐substituted porphyrin derivative ( ImP ) and pyridinium‐substituted porphyrin derivative ( PyP ). The photophysical properties of both the sensitizers including absorption, fluorescence emission, quantum yields of the triplet excited states and singlet oxygen generation efficiencies were evaluated in the context of aPDT application. The studied porphyrins exhibited high ability to accumulate into bacterial cells with complete penetration into early stage biofilms. As compared with ImP, PyP was found to be more effective for photoinactivation of bacterial strains associated with periodontitis, without any signs of dark toxicity, owing to its high photocytotoxicity.     

Cobalt‐Mediated Radical Coupling (CMRC): An Unusual Route to Midchain‐Functionalized Symmetrical Macromolecules

Cobalt‐mediated radical coupling (CMRC) is a straightforward approach to the synthesis of symmetrical macromolecules that relies on the addition of 1,3‐diene compounds onto polymer precursors preformed by cobalt‐mediated radical polymerization (CMRP). Mechanistic features that make this process so efficient for radical polymer coupling are reported here. The mechanism was established on the basis of NMR spectroscopy and MALDI‐MS analyses of the coupling product and corroborated by DFT calculations. A key feature of CMRC is the preferential insertion of two diene units in the middle of the chain of the coupling product mainly according to a trans‐1,4‐addition pathway. The large tolerance of CMRC towards the diene structure is demonstrated and the impact of this new coupling method on macromolecular engineering is discussed, especially for midchain functionalization of polymers. It is worth noting that the interest in CMRC goes beyond the field of polymer chemistry, since it constitutes a novel carbon–carbon bond formation method that could be applied to small organic molecules.