Interfacial and aggregation properties of aqueous sodium <Emphasis Type="Italic">N</Emphasis>-dodecanoylsarcosinate solutions at different pH

The pH dependence of an anionic surfactant, sodium N-dodecanoylsarcosinate (SLAS), has been studied by measuring interfacial tension, fluorescence, dynamic light scattering, etc., in aqueous solutions with phosphate and borate buffers. The interfacial tension (γ) of SLAS decreases remarkably with a pH decrease and is constant at pH > 7.3. The observed values for the critical micelle concentration (cmc) and the surfactant concentration at which its γ value is reduced by 20 mN/m from that of pure water (C ₂₀) decrease with a pH decrease, while those also become constant at pH > 6.5 and >7.3, respectively. On the other hand, the interfacial excess of SLAS increases at pH < 7.3. These interfacial behaviors have been further investigated by the addition of Tl⁺ which replaces Na⁺ of SLAS. The observed γ values of LAS⁻ with the different counter cations are in the order of H⁺ < Tl⁺ < Na⁺. In order to reveal aggregation properties of SLAS, the aggregation number (N _agg), the micropolarity, the hydrodynamic radius (R _h) of micelle, and the fluorescence anisotropy of Rhodamine B (r) have been evaluated at various pHs. The N _agg value shows a decreasing tendency with a pH increase. The I ₁/I ₃ ratio and the R _h values do not strongly depend on pH. The r value decreases until pH 7 and remains constant at pH > 7.0. These interfacial and micelle properties have been discussed in detail considering the electrostatic interaction and the molecular structures of the hydrophilic headgroup.     

Analysis of Photoexcitation Energy Dependence in the Photoluminescence of Firefly Luciferin

The whole pathways for photoluminescence, which include absorption, relaxation and emission, of firefly luciferin in aqueous solutions of different pH values with different photoexcitation energies were theoretically investigated by considering protonation/deprotonation. It is experimentally known that the color of fluorescence changes from green to red with a decrease in the photoexcitation energy. We confirmed with the theoretical analysis that the peak energy shift in the fluorescence spectra with varying photoenergies is due to a change in photoluminescence pathway. When the photoexcitation energy is decreased, the red emission from a monoanion form of firefly luciferin with carboxylate and phenolate groups and N‐protonated thiazoline ring occurs irrespective of the pH values. However, because the species abundant in the solution and those excited by the photon depend on the solution pH, the pathway leading to the monoanion form changes with the solution pH.     

Theoretical Study of Firefly Luciferin pKa Values—Relative Absorption Intensity in Aqueous Solutions

Ground‐state vibrational analyses of firefly luciferin and its conjugate acids and bases are performed. The Gibbs free energies obtained from these analyses are used to estimate pK_a values for phenolic hydroxy and carboxy groups and the N–H⁺ bond in the N‐protonated thiazoline or benzothiazole ring of firefly luciferin. The theoretical pK_a values are corrected using the experimental values. The concentrations of these chemical species in solutions with different pH values are estimated from their corrected pK_a values, and the pH dependence of their relative absorption intensities is elucidated. With the results obtained we assign the experimental spectra unequivocally. Especially, the small peak near 400 nm at pH 1–2 in experimental absorption spectra is clarified to be due to the excitation of carboxylate anion with N‐protonated thiazoline ring of firefly luciferin. Our results show that the pK_a values of chemical species, which are contained in the aqueous solutions, are effective to assign experimental absorption spectra.     

Sorption of Th(IV) on MX-80 bentonite: effect of pH and modeling

MX-80 bentonite was characterized by XRD and FTIR in detail. The sorption of Th(IV) on MX-80 bentonite was studied as a function of pH and ionic strength in the presence and absence of humic acid/fulvic acid. The results indicate that the sorption of Th(IV) on MX-80 bentonite increases from 0 to 95% at pH range of 0–4, and then maintains high level with increasing pH values. The sorption of Th(IV) on bentonite decreases with increasing ionic strength. The diffusion layer model (DLM) is applied to simulate the sorption of Th(IV) with the aid of FITEQL 3.1 mode. The species of Th(IV) adsorbed on bare MX-80 bentonite are consisted of “strong” species o \textYOHTh^{4 +} \equiv {\text{YOHTh}}^{4 + } at low pH and “weak” species o \textXOTh(OH)₃ \equiv {\text{XOTh(OH)}}_{3} at pH > 4. On HA bound MX-80 bentonite, the species of Th(IV) adsorbed on HA-bentonite hybrids are mainly consisted of o \textYOThL₃ \equiv {\text{YOThL}}_{3} and o \textXOThL₁ \equiv {\text{XOThL}}_{1} at pH < 4, and o \textXOTh(OH)₃ \equiv {\text{XOTh(OH)}}_{3} at pH > 4. Similar species of Th(IV) adsorbed on FA bound MX-80 bentonite are observed as on FA bound MX-80 bentonite. The sorption isotherm is simulated by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models, respectively. The sorption mechanism of Th(IV) on MX-80 bentonite is discussed in detail.     

Sorption of Pu in various oxidation states onto multiwalled carbon nanotubes

The sorption of Pu(IV), polymeric Pu(IV), Pu(V) and Pu(VI) from the 0.1 M NaClO₄ solution onto multiwalled carbon nanotubes was investigated. The kinetic study of the sorption process have shown that the polymeric Pu(IV) has the highest sorption rate, while decrease of sorption rate for plutonium aqua-ions in the order Pu(VI) > Pu(IV) > Pu(V) was found. Strong dependence of sorption kinetics of ionic plutonium species on pH was shown, in contrast to polymeric species, that were shown to quantitatively sorb (99%) in the wide pH range (pH 2–10). Two different sorption mechanisms for ionic and polymeric plutonium species were proposed: on the bases of sorption isotherms chemisorptions of plutonium aqua-ions onto carbon nanotubes and through intermolecular interaction for the polymeric plutonium species was defined. Distribution coefficients of plutonium in various oxidation states were found to increase with pH, showing the highest values for polymeric plutonium sorption (K _d  = 2.4 × 10⁵ mL g⁻¹ at pH = 6).     

The sorption of Eu(III) on calcareous soil: effects of pH,ionic strength,temperature, foreign ions and humic acid

The sorption of Eu(III) on calcareous soil as a function of pH, humic acid (HA), temperature and foreign ions was investigated under ambient conditions. Eu(III) sorption on soil was strongly pH dependent in the observed pH range. The effect of ionic strength was significant at pH < 7, and not obvious at pH > 8. The type of salt cation used had no visible influence on Eu(III) uptake on soil, however at low pH values, the influence of anions was following the order: Cl⁻ ≈ NO₃ ⁻ > ClO₄ ⁻. In the presence of HA, the sorption edge obviously shifted about two pH units to the lower pH, whilst in range of pH 6–7, the sorption of Eu(III) decreased with increasing pH because a considerable amount of Eu(III) was present as humate complexes in aqueous phase, then increased again at pH > 11. The results indicated that the sorption of Eu(III) on soil mainly formed outer-sphere complexes and/or ion exchange below pH ~7; whereas inner-sphere complexes and precipitation of Eu(OH)₃(s) may play main role above pH ~8.     

Influence of acid‐base dissociation equilibria during electromembrane extraction

Electromembrane extraction is affected by acid–base equilibria of the extracted substances as well as coupled equilibria associated with the partitioning of neutral substances to the supported liquid membrane. A theoretical model for this was developed and verified experimentally in the current work using pure 2‐nitrophenyl octyl ether as supported liquid membrane. From this model, extraction efficiency as a function of pH can be predicted. Substances with log P < 0–2 are generally extracted with low efficiency. Substances with log P > 2 are generally extracted with high efficiency when acceptor pH < pK_aH ? log P. Twelve basic drug substances (2.07 < log P < 6.57 and 6.03 < pK_aH < 10.47) were extracted under different pH conditions with 2‐nitrophenyl octyl ether as supported liquid membrane and fitted to the model. Seven of the drug substances behaved according to the model, while those with log P close to 2.0 deviated from prediction. The deviation was most probably caused by deprotonation and ion pairing within the supporting liquid membrane. Measured partition coefficients (log P) between 2‐nitrophenyl octyl ether and water, were similar to traditional log P values between n‐octanol and water. Thus, the latter have potential for pK_aH ? log P predictions.     

Spectroscopic Properties of Amine‐substituted Analogues of Firefly Luciferin and Oxyluciferin

Spectroscopic and photophysical properties of firefly luciferin and oxyluciferin analogues with an amine substituent (NH₂, NHMe and NMe₂) at the C6' position were studied based on absorption and fluorescence measurements. Their π‐electronic properties were investigated by DFT and TD‐DFT calculations. These compounds showed fluorescence solvatochromism with good quantum yields. An increase in the electron‐donating strength of the substituent led to the bathochromic shift of the fluorescence maximum. The fluorescence maxima of the luciferin analogues and the corresponding oxyluciferin analogues in a solvent were well correlated with each other. Based on the obtained data, the polarity of a luciferase active site was explained. As a result, the maximum wavelength of bioluminescence for a luciferin analogue was readily predicted by measuring the photoluminescence of the luciferin analogue in place of that of the corresponding oxyluciferin analogue.     

Influence of pH,ionic strength,foreign ions and FA on adsorption of radiocobalt on goethite

This work contributed to the adsorption of radiocobalt on goethite as a function of contact time, pH, ionic strength and foreign ions in the absence and presence of fulvic acid (FA) under ambient conditions. The results indicated that adsorption of Co(II) was dependent on ionic strength and foreign ions at low pH values (pH < 7.8), and independent of ionic strength and foreign ions at high pH values (pH > 7.8). Outer-sphere surface complexation and/or ion exchange were the main mechanisms of Co(II) adsorption on goethite at low pH values, whereas inner-sphere surface complexation was the main adsorption mechanism at high pH values. The presence of FA enhanced Co(II) adsorption at low pH values, but reduced Co(II) adsorption at high pH values. The thermodynamic data (ΔH ⁰, ΔS ⁰, ΔG ⁰) were calculated from the temperature dependent adsorption isotherms, and the results suggested that adsorption process of Co(II) on goethite was spontaneous and endothermic. The results are crucial to understand the physicochemical behavior of Co(II) in the nature environment.     

Synthesis and pH-sensitive micellization of doubly hydrophilic poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) triblock copolymer in aqueous solutions

A doubly hydrophilic triblock copolymer poly(acrylic acid)-b-poly(ethylene glycol)-b-poly(acrylic acid) (PAA-b-PEO-b-PAA) with M _w/M _n = 1.15 was synthesized by atom transfer radical polymerization of t-butyl acrylate (tBA), followed by acidolysis of the PtBA blocks. The pH-sensitive micellization of PAA-b-PEO-b-PAA in acidic solution was investigated by potentiometric titration, fluorescence spectrum, dynamic light scattering and zeta potential. The pK _a was 6.6 and 6.0 in deionized water and in 0.1 mol/L NaCl solution, respectively. The copolymer formed micelles composed of a weakly hydrophobic core of complexed PAA and PEO and a hydrophilic PEO shell in 1 mg/mL solution at pH < 5.5 due to hydrogen bonding. The critical micelle concentration was 0.168 mg/mL at pH 2.0. At pH < 4.5, steady and narrow distributed micelles were formed. Increasing pH to 5.0, unsteady and broad distributed micelles were observed. At pH > 5.5, the micelle was destroyed owing to the ionization of the PAA blocks.     

Investigation of the kinetics of aquation of the 1:2 complex between Cr and nitrilotriacetic acid

Aquation of the 1:2 complex between Cr^III and nitrilotriacetic acid (NTA) was monitored using a combination of capillary electrophoresis (CE), ultraviolet–visible (UV–vis) spectrophotometry, and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. To our knowledge, this is the first published report of the use of either CE or ATR-FTIR to monitor the kinetics of ligand exchange reactions of Cr^III–aminocarboxylate complexes. The aquation products were identified as the 1:1 Cr^III complex with NTA and “free” NTA. The 1:1 complex dimerized to form a 2:2 complex in a slower subsequent reaction step. Rates of disappearance of the 1:2 complex were first-order under all experimental conditions. First-order rate constants for aquation, k_obs (h⁻¹), measured using all three techniques were similar at equivalent pH conditions, and with values reported previously in the literature. Measured k_obs values exhibited a complicated pH dependence with three distinct regions: (i) at pH < 6.5, k_obs values increased with decreasing pH, (ii) between pH 6.5 and 8.0, k_obs values were relatively constant, and (iii) at 8.0 < pH < 10.0, k_obs increased with increasing pH and then leveled off. A kinetic model incorporating five distinct aquation pathways was successfully employed to model the pH dependence of k_obs from 0.0 < pH < 10.0. These results show that CE and ATR-FTIR can be used as tools for better understanding ligand exchange processes occurring in aqueous solution.     

Investigation of solution chemistry effects on sorption behavior of radionuclide <Superscript>64</Superscript>Cu(II) on illite

In this work, a series of batch experiments were carried out to investigate the effect of various environmental factors such as contact time, pH, ionic strength, coexisting electrolyte ions, humic substances and temperature on the sorption behavior of illite towards ⁶⁴Cu(II). The results indicated that ⁶⁴Cu(II) sorption on illite achieved equilibrium quickly. The pH- and ionic strength-dependent sorption suggested that ⁶⁴Cu(II) sorption on illite was dominated by ion exchange or outer-sphere surface complexation at pH < 7, whereas the pH-dependent and ionic strength-independent sorption indicated that the sorption process was mainly attributed to inner-sphere surface complexation at pH > 7. A positive effect of humic substances on ⁶⁴Cu(II) sorption was found at pH < 6.5, whereas a negative effect was observed at pH > 6.5. The Langmuir and Freundlich models were used to simulate the sorption isotherms of ⁶⁴Cu(II) at three different temperatures of 293, 313, and 333 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰, and ΔG ⁰) of ⁶⁴Cu(II) sorption on illite were calculated from the temperature dependent sorption isotherms, and the results indicated that the sorption of ⁶⁴Cu(II) on illite was endothermic and spontaneous. From the experimental results, it is possible to conclude that illite has good potentialities for cost-effective treatments of ⁶⁴Cu(II)-contaminated wastewaters.     

Photolysis of 6-ethoxy-2,2,4-trimethyl-8-nitro-1,2-dihydroquinoline. Unusual dependence on the irradiation wavelength

The spectral and kinetic parameters of transient species generated in the irradiation of 6-ethoxy-2,2,4-trimethyl-8-nitro-1,2-dihydroquinoline were examined by stationary and pulse photolysis in the solvents: heptane, acetonitrile, methanol, and ethanol. Upon excitation of the long-wavelength absorption band (λ_ex > 450 nm), a reversible photochemical reaction was revealed, and the spectral and kinetic parameters of three transient species observed in the photolysis were characterized (λ_max = 390, 400, and 420 nm (acetonitrile), k = 97, 500, and 2000 s⁻¹, respectively). The absorption spectra and the rate constants of the decay of transient species are almost independent of the medium polarity and the presence of oxygen in the system. The excited state generated during irradiation to the short-wavelength absorption band (290 < λ_ex < 350 nm) is inactive in the photochemical reaction and deactivates without the formation of transient species. The mechanism of the reversible photochemical reaction is suggested, which involves the opening of the heterocycle N-C bond upon photoexcitation of the long-wavelength absorption band and the thermal back reaction.     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Effect of pH, ionic strength, foreign ions and humic substances on Th(IV) sorption to GMZ bentonite studied by batch experiments

Bentonite has been studied extensively because of its strong sorption and complexation ability. Herein, GMZ bentonite from Gaomiaozi county (Inner Mongolia, China) was investigated as the candidate of backfill material for the removal of Th(IV) ions from aqueous solutions. The results indicate that the sorption of Th(IV) is strongly dependent on pH and ionic strength at pH < 5, and independent of ionic strength at pH > 5. Outer-sphere surface complexation or ion-exchange are the main mechanism of Th(IV) sorption on GMZ bentonite at low pH values, whereas the sorption of Th(IV) at pH > 5 is mainly dominated by inner-sphere surface complexation or surface precipitation. Soil fulvic acid (FA) and humic acid (HA) have a positive influence on the sorption of Th(IV) on bentonite at pH < 5. The different addition sequences of HA and Th(IV) to GMZ bentonite suspensions have no obvious effect on Th(IV) sorption to HA-bentonite hybrids. The high sorption capacity of Th(IV) on GMZ bentonite suggests that the GMZ bentonite can remove Th(IV) ions from large volumes of aqueous solutions in real work.     

Adsorption kinetic,thermodynamic and desorption studies of phosphate onto hydrous niobium oxide prepared by reverse microemulsion method

A type of Nb₂O₅⋅3H₂O was synthesized and its phosphate removal potential was investigated in this study. The kinetic study, adsorption isotherm, pH effect, thermodynamic study and desorption were examined in batch experiments. The kinetic process was described by a pseudo-second-order rate model very well. The phosphate adsorption tended to increase with a decrease of pH. The adsorption data fitted well to the Langmuir model with which the maximum P adsorption capacity was estimated to be 18.36 mg-P g⁻¹. The peak appearing at 1050 cm⁻¹ in IR spectra after adsorption was attributed to the bending vibration of adsorbed phosphate. The positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. ΔG° values obtained were negative indicating a spontaneous adsorption process. A phosphate desorbability of approximately 68% was observed with water at pH 12, which indicated a relatively strong bonding between the adsorbed phosphate and the sorptive sites on the surface of the adsorbent. The immobilization of phosphate probably occurs by the mechanisms of ion exchange and physicochemical attraction. Due to its high adsorption capacity, this type of hydrous niobium oxide has the potential for application to control phosphorus pollution.     

Separation of no-carrier-added radioactive scandium from neutron irradiated titanium

In this work, sorption of Ni(II) from aqueous solution to goethite as a function of various water quality parameters and temperature was investigated. The results indicated that the pseudo-second-order rate equation fitted the kinetic sorption well. The sorption of Ni(II) to goethite was strongly dependent on pH and ionic strength. A positive effect of HA/FA on Ni(II) sorption was found at pH < 8.0, whereas a negative effect was observed at pH > 8.0. The Langmuir, Freundlich, and D-R models were applied to simulate the sorption isotherms at three different temperatures of 293.15 K, 313.15 K and 333.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) were calculated from the temperature dependent sorption, and the results indicated that the sorption was endothermic and spontaneous. At low pH, the sorption of Ni(II) was dominated by outer-sphere surface complexation or ion exchange with Na⁺/H⁺ on goethite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH.     

Proteorhodopsin Photocycle Kinetics Between pH 5 and pH 9

The retinal protein proteorhodopsin is a homolog of the well‐characterized light‐driven proton pump bacteriorhodopsin. Basic mechanisms of proton transport seem to be conserved, but there are noticeable differences in the pH ranges of proton transport. Proton transport and protonation state of a carboxylic acid side chain, the primary proton acceptor, are correlated. In case of proteorhodopsin, the pK_a of the primary proton acceptor Asp‐97 (pK_a ≈ 7.5) is unexpectedly close to environmental pH (pH ≈ 8). A significant fraction of proteorhodopsin is possibly inactive at natural pH, in contrast to bacteriorhodopsin. We investigated photoinduced kinetics of proteorhodopsin between pH 5 and pH 9 by time resolved UV/vis absorption spectroscopy. Kinetics is inhomogeneous within that pH region and can be considered as a superposition of two fractions. These fractions are correlated with the Asp‐97 titration curve. Beside Asp‐97, protonation equilibria of other groups influence kinetics, but the observations do not point toward major differences of primary proton acceptor function in proteorhodopsin and bacteriorhodopsin. The pK_a of proteorhodopsin and some of its variants is suspected to be an example of molecular adaptation to the physiology of the original organisms.     

First results on Fe solid-phase extraction from coastal seawater using anatase TiO2 nano-particles

This paper describes the application of TiO₂ nano-particles (anatase form) for the solid-phase extraction of iron from coastal seawater samples. We investigated the adsorption processes by infra-red spectroscopy. We compared in batch and on-(mini)column extraction approaches (0.1 and 0.05 g TiO₂ per sample, respectively), combined to external calibration and detection by inductively coupled plasma mass spectrometry at medium mass resolution. Globally, this titania phase was slightly more efficient with seawater than with ultra-pure water, although between pH 2 and pH 7, the Fe retention efficiency progressed more in ultra-pure water than in seawater (6.9 versus 4.8 times improvement). Different reaction schemes are proposed between Fe(III) species and the two main categories of titania sites at pH 2 (adsorption of [FeL _x ]^{(3 − x)+} via possibly the mediation of chlorides) and at pH 7 (adsorption of [Fe(OH)₂]⁺ and precipitation of [Fe(OH)₃]⁰). Under optimised conditions, the inlet system was pre-cleaned by pumping 6% HCl for ∼2 h, and the column was conditioned by aspirating ultra-pure water (1.7 g min⁻¹) and 0.05% ammonia (0.6 g min⁻¹) for 1 min. Then 3 g seawater sample was loaded at the same flow rate while being mixed on-line with 0.05% ammonia at 0.6 g min⁻¹ to adjust the pH to 7. The iron retained on the oxide powder was then eluted with 3 g 6% HCl (<0.002% residual salinity in the separated samples). The overall procedural blank was 220 ± 46 (2 s, n = 16) ng Fe kg⁻¹ (the titania was renewed in the column every 20 samples, with 2-min rinsing in between samples with 6% HCl at 1.5 g min⁻¹). The recovery estimated from the Canadian certified reference material CASS-2 was 69.5 ± 7.6% (2 s, n = 4). Typically, the relative combined uncertainty (k = 2) estimated for the measurement of ∼1 μg Fe kg⁻¹ (0.45 μm filtered and acidified to pH 1.5) of seawater was ∼12%. We applied our method to a similar sample, from the coastal region of the North Sea. The agreement well within stated uncertainties of our result with the value obtained independently by isotope dilution mass spectrometry further validated our method.     

Electrochemical study of the methylcyclopentane oxidation in anhydrous hydrogen fluoride and HF−SbF5 superacid solutions

The electrochemical study of methylcyclopentane (MCPH) oxidation in anhydrous hydrogen fluoride and related superacid media leads to determination of the standard potentials of the MCPH redox couples and to the establishment of the potential acidity diagram of MCPH. Fromtthese results the oxidation by H⁺ ion of MCPH into the carbenium ion MCP⁺ is observed in acidic media: pH<6 or R(H)<?21.9 (pH values are reported on the acidity scale in HF, pH=0 for a molar solution of SbF₅, and the acidity levels are referred to H₂O by means of an R(H) function: for pH=0, R(H) is ?27.9). In HF?SbF₅ mixtures, pH<2.3 or R(H) <?25.6, the protonation of MCPH to form the carbonium ion MCPH₂⁺ has to be taken into account and the acidity constant is determined. In basic media, pH>8.1 or R(H)>?19.8, condensation reactions are enhanced through a radical oxidation state; the disproportionation constant of the dimer (MCP)₂ is determined. Moreover, in the most acidic media, pH<2 or R(H)<?25.9, evidence for the cracking of MCPH through the protolysis of a C?C bond is shown.