Unsaturated thiacrown ethers: synthesis, physical properties, and formation of a silver complex.

The 6-, 9-, 12-, 15-, 18-, 21-, 24-, and 27-membered unsaturated thiacrown ethers 1-8 were formed by reaction of cis-1,2-dichloroethylene with sodium sulfide in acetonitrile. Crystal structures of 4-8 were determined by X-ray crystallography, and it was found that all sulfur atoms of 5-8 direct to the inside of the ring (endodentate). All of the ORTEP drawings show that there are cavities in these molecules, and the cavity sizes in 4-8 were 1.76, 2.34, 3.48, 4.43, and 5.36 A, respectively. The UV spectra of 4-8 showed absorption maximums at the range of 255-276 nm in acetonitrile, and the absorption maximums of 4-8 were found to shift to longer wavelengths by changing the solvent from acetonitrile to cyclohexane. The cyclic voltammograms of 4-8 indicate that the larger unsaturated thiacrown ethers were oxidized more easily than the smaller systems, and unsaturated thiacrown ethers were oxidized more easily than corresponding saturated systems. The reaction of 4 with silver trifluoroacetate in acetone afforded the colorless complex Ag(I)(C2H2S)5(CF3COO) 9. The crystal structure of 9 was determined by X-ray analysis, and it was found that three of the five sulfur atoms bonded to the silver atom.     

Extraction spectrophotometric determination of mercury(II) using thiacrown ethers and Bromocresol Green

A reasonably sensitive and highly selective spectrophotometric method for the determination of mercury(II) is proposed. The method is based on the extraction of the ion-associate formed by a mercury(II) thiacrown ether cationic complex with Bromocresol Green as the anionic counter-ion using chloroform as the extracting solvent. The effect of thiacrown ethers of different cavity sizes, namely 1,4,7,10,13-pentathiacyclopentadecane (PTP) and 1,4,7,10,13,16-hexathiacyclooctadecane (HTO), the thiacrown ether concentration, the extracting solvent, the bromocresol green concentration and the aqueous phase pH on the extraction were investigated. Measurement of the absorbance at the lambda(max) (420 nm) of the extracted ion-associate reveals that Beer's law is obeyed over 0.5-12.0 ppm mercury(II) for both ligands. Slight interference from copper(II) and cadmium(II) is exhibited by the PTP ligand, while HTO is negligibly affected by these metal ions. Strong interference from silver(I) is evident for both ligands while alkali, alkaline earth and other transition metals tested posed negligible interference. Analysis of mercury in synthetic complex mixtures was satisfactory.     

N-heterocyclic carbene Pt(II) complexes from caffeine: synthesis, structures and photoluminescent properties

The caffeine-derived N-heterocyclic carbene (NHC) complex [Pt(II)(C^N)(NHC)Cl] (C^N = 2-phenylpyridine), 4 has the opposite stereochemistry and a shorter Pt-C(carbene) bond compared to that of an analogous benzimidazole-derived N,N-heterocyclic carbene (NNHC) Pt complex 2. These suggest a lower trans influence of pyridyl N compared to cyclometallated carbon and an increased Pt-NHC π-backbonding because of decreased π-donation resulting from conjugation to the electron deficient pyrimidine of caffeine. Complex 4 has a lower emission quantum yield (Φ) and is blue-shifted into the green region of the visible spectrum relative to non-carbene Pt(II) cyclometalated complex 5.     

Silanol-based pincer Pt(II) complexes: synthesis, structure, and unusual reactivity

Aiming at the generation of a silanone intramolecularly bound to platinum, we prepared pincer-type PSiP silanol Pt(II) complexes. While a stable silanone complex was not isolated, unusual reactivity modes, involving its possible intermediacy, were observed. Treatment of the new PSiH 2P-type ligand ( o-IPr 2PC 6H 4) 2SiH 2 ( 7) with (Me 2S) 2Pt(Me)Cl yields the pincer-type hydrosilane complex [{( o- iPr 2PC 6H 4) 2SiH}PtCl] ( 8), which upon Ir(I)-catalyzed hydrolytic oxidation gives the structurally characterized silanol complex [{( o- iPr 2PC 6H 4) 2SiOH}PtCl] ( 3). Complex 3, comprising in its structure the nucleophilic silanol fragment and electrophilic Pt(II)-Cl moiety, exhibits dual reactivity. Its reaction with the non-nucleophilic KB(C 6F 5) 4 in fluorobenzene leads to the ionic complex [{( o- iPr 2PC 6H 4) 2SiOH}Pt] (+) [(C 6F 5) 4B] (-) ( 9), which reacts with CO to yield the structurally characterized [{( o- iPr 2PC 6H 4) 2SiOH}PtCO] (+) [(C 6F 5) 4B] (-) ( 10). Treatment of 3 with non-nucleophilic bases leads to unprecedented rearrangement and coupling, resulting in the structurally characterized, unusual binuclear complex 11. The structure of 11 comprises two different fragments: the original O-Si-Pt(II)-Cl pattern, and the newly formed silanolate Pt(II)-H pattern, which are connected via a disiloxane bridge. Complex 9 undergoes a similar hydrolytic rearrangement in the presence of iPr 2NEt to give the mononuclear silanolate Pt(II)-H complex 17. Both these rearrangement-coupling reactions probably involve the inner-sphere generation of an intermediate silanone 14, which undergoes nucleophilic attack by the starting silanol 3 to yield complex 11, or adds a water molecule to yield complex 17. X-ray diffraction studies of 3, 10, and 11 exhibit a very short Si-Pt bond length (2.27-2.28 A) in the neutral complexes 3 and 11 that elongates to 2.365 A in the carbonyl complex 10. A significantly compressed geometry of the silanolate platinum(II)-hydride fragment B of the binuclear complex 11 features a Pt(2)-O(2)-Si(2) angle of 100.4 (3) degrees and a remarkably short Pt(2)...Si(2) [2.884 (3) A] distance.     

Electrochemical, spectroscopic, and photophysical properties of structurally diverse polyazine-bridged Ru(II),Pt(II) and Os(II),Ru(II),Pt(II) supramolecular motifs

Five new tetrametallic supramolecules of the motif [{(TL)(2)M(dpp)}(2)Ru(BL)PtCl(2)](6+) and three new trimetallic light absorbers [{(TL)(2)M(dpp)}(2)Ru(BL)](6+) (TL = bpy = 2,2'-bipyridine or phen = 1,10-phenanthroline; M = Ru(II) or Os(II); BL = dpp = 2,3-bis(2-pyridyl)pyrazine, dpq = 2,3-bis(2-pyridyl)quinoxaline, or bpm = 2,2'-bipyrimidine) were synthesized and their redox, spectroscopic, and photophysical properties investigated. The tetrametallic complexes couple a Pt(II)-based reactive metal center to Ru and/or Os light absorbers through two different polyazine BL to provide structural diversity and interesting resultant properties. The redox potential of the M(II/III) couple is modulated by M variation, with the terminal Ru(II/III) occurring at 1.58-1.61 V and terminal Os(II/III) couples at 1.07-1.18 V versus Ag/AgCl. [{(TL)(2)M(dpp)}(2)Ru(BL)](PF(6))(6) display terminal M(dπ)-based highest occupied molecular orbitals (HOMOs) with the dpp(π*)-based lowest unoccupied molecular orbital (LUMO) energy relatively unaffected by the nature of BL. The coupling of Pt to the BL results in orbital inversion with localization of the LUMO on the remote BL in the tetrametallic complexes, providing a lowest energy charge separated (CS) state with an oxidized terminal Ru or Os and spatially separated reduced BL. The complexes [{(TL)(2)M(dpp)}(2)Ru(BL)](6+) and [{(TL)(2)M(dpp)}(2)Ru(BL)PtCl(2)](6+) efficiently absorb light throughout the UV and visible regions with intense metal-to-ligand charge transfer (MLCT) transitions in the visible at about 540 nm (M = Ru) and 560 nm (M = Os) (ε ≈ 33,000-42,000 M(-1) cm(-1)) and direct excitation to the spin-forbidden (3)MLCT excited state in the Os complexes about 720 nm. All the trimetallic and tetrametallic Ru-based supramolecular systems emit from the terminal Ru(dπ)→dpp(π*) (3)MLCT state, λ(max)(em) ≈ 750 nm. The tetrametallic systems display complex excited state dynamics with quenching of the (3)MLCT emission at room temperature to populate the lowest-lying (3)CS state population of the emissive (3)MLCT state.     

Heteroleptic platinum(II) and palladium(II) complexes with thiacrown and diimine ligands

We wish to report the synthesis, crystal structures, spectroscopic and electrochemical properties of several new Pt(II) heteroleptic complexes containing the thiacrown, 9S3 (1,4,7-trithiacyclononane) with a series of substituted phenanthroline ligands and related diimine systems. These five ligands are 5,6-dimethyl-1,10-phenanthroline(5,6-Me₂-phen), 4,7-dimethyl-1,10-phenanthroline(4,7-Me₂-phen), 4,7-diphenyl-1,10-phenanthroline(4,7-Ph₂-phen), 2,2′-bipyrimidine(bpm), and pyrazino[2,3-f]quinoxaline or 1,4,5,8-tetraazaphenanthrene(tap). All complexes have the general formula [Pt(9S3)(N₂)](PF₆)₂ (N₂ = diimine ligand) and form similar structures in which the Pt(II) center is surrounded by a cis arrangement of the two N donors from the diimine chelate and two sulfur atoms from the 9S3 ligand. The third 9S3 sulfur in each structure forms a longer interaction with the platinum resulting in an elongated square pyramidal structure, and this distance is sensitive to the identity of the diimine ligand. In addition, we report the synthesis, structural, electrochemical, and spectroscopic properties of related Pd(II) 9S3 complex with tap. The ¹⁹⁵Pt NMR chemical shifts for the six Pt(II) complexes show a value near −3290 ppm, consistent with a cis-PtS₂N₂ coordination sphere although more electron-withdrawing ligands such as tap show resonances shifted by almost 100 ppm downfield. The physicochemical properties of the complexes generally follow the electron-donating or withdrawing properties of the phenanthroline substituents.     

Coordination chemistry of a novel tetramacrocyclic ligand derived from 1,4,7-triazacyclononane: synthesis,structure, and properties of nickel(II) and copper(II) complexes

A new polynucleating ligand, 1,2,4,5-tetrakis(1,4,7-triazacyclonon-1-ylmethyl)benzene (Ldur), has been prepared and characterized as its dodecahydrobromide salt. Addition of base to an aqueous solution of this salt and 4 molar equivalents (m.e.) of a Ni(II) salt produces a mixture of bi- and trinuclear complexes, which can be separated by cation-exchange chromatography (CEC) and crystallized as [Ni2Ldur](ClO4)(4).2H2O (1) and [Ni3Ldur(H2O)6](ClO4)(6).9H2O (2). The "full capacity" tetranuclear complex, [Ni4Ldur(H2O)12](ClO4)(8).8H2O (3), is obtained by slow addition of Ldur to a refluxing aqueous solution of excess Ni2+ ions, followed by CEC purification. Treatment of Ldur with 4 m.e. of a copper(II) salt produces exclusively the tetranuclear complex, [Cu4Ldur(H2O)8](ClO4)(8).9H2O (4), while reaction with only 2 m.e. of Cu2+ ions yields the binuclear complex, [Cu2Ldur](ClO4)(4).4H2O (5). The X-ray structures of complexes 1,2,4, and [Cu2Ldur](ClO4)(4).3H2O (5') have been determined; all are monoclinic, P2(1)/c: for 1, a = 9.497(3) A, b = 13.665(5) A, c = 19.355(6) A, beta = 100.57(2) degrees, V = 2469(1) A3, and Z = 2; for 2, a = 22.883(7) A, b = 15.131(6) A, c = 20.298(8) A, beta = 97.20(3) degrees, V = 6973(4) A3, and Z = 4; for 4, a = 16.713(7) A, b = 16.714(6) A, c = 14.775(11) A, beta = 108.24(5) degrees, V = 3920(4) A3, and Z = 2; and for 5', a = 9.5705(1) A, b = 13.0646(1) A, c = 20.1298(2) A, beta = 103.1618(8) degrees, V = 2450.81(4) A3, and Z = 2. The metal centers in 1 and 5' lie in distorted octahedral environments, each facially coordinated by two of the triamine rings of Ldur, the cation in each case being centrosymmetric. In 2, one of the nickel(II) centers is similarly sandwiched by two triamine rings, while the other two nickel(II) centers are each coordinated by a single triamine ring from the ligand, with their distorted octahedral coordination spheres each being completed by three water molecules. In 4, the four triamine rings of Ldur bind to separate copper(II) centers, with two water molecules occupying the remaining two sites of the distorted square pyramidal (SP) coordination spheres, the cation again being centrosymmetric.     

The neglected Pt-N(sulfonamido) bond in Pt chemistry. New fluorophore-containing Pt(II) complexes useful for assessing Pt(II) interactions with biomolecules

Treatment of cis-Pt(Me2SO)2Cl2 with DNSH-tren afforded [Pt(DNSH-tren)Cl]Cl and with DNSH-dienH, under increasingly more basic conditions, led to Pt(DNSH-dienH)Cl(2), Pt(DNSH-dien)Cl, and Pt(DNS-dien). (DNSH = 5-(dimethylamino)naphthalene-1-sulfonyl, linked via a sulfonamide group to tris(2-aminoethyl)amine (DNSH-tren) and diethylenetriamine (DNSH-dienH); the H's in DNSH-dienH designate protons sometimes lost upon Pt binding, i.e., sulfonamide NH for the dienH moiety and H8 for the DNSH moiety). Respectively, the three neutral DNSH-dienH-derived complexes are difunctional, monofunctional, and nonfunctional and exhibit decreasing fluorescence in this order as the dansyl group distance to Pt decreases. 2D NMR data establish that Pt(DNS-dien) has a Pt-C8 bond and a Pt-N(sulfonamido) bond. Pt(DNSH-dien)Cl and [Pt(DNSH-tren)Cl]Cl bind to N7 of 6-oxopurines (e.g., 5'-GMP, 3'-IMP, and 9-ethylguanine) and sulfur of methionine (met). Competition and challenge reactions for Pt(II) with met and 5'-GMP typically reveal that met binding is favored kinetically but that 5'-GMP binding is favored thermodynamically. This common type of behavior was found for [Pt(DNSH-tren)Cl]Cl. In contrast, Pt(DNSH-dien)Cl had reduced kinetic selectivity for met. This unusual behavior undoubtedly arises as a consequence of the bound Pt-N(sulfonamido) group, which donates strongly to Pt (as indicated by relatively upfield dien NH signals) and which places the bulky DNSH moiety close to the monofunctional reaction site. The decrease in the relatively upfield shifts of the DNSH group signals indicates that this group stacks with the purine. This stacking could explain the unprecedented, relatively low reactivity of a Pt complex bearing a dien-type ligand toward met vs 5'-GMP.     

Tetra chlorocopper(II) chemistry: delineation of optical, thermal properties

The thermal decomposition paths of pyridinium tetra chlorocopper(II) (A) differs from the anilinium tetra chlorocopper(II) (B). In the case of pyridinium tetra chlorocopper(II) it loses two molecules of pyridinium hydrochloride and CuCl₂ is formed in the temperature range of 140–350 °C. Whereas the anilinium tetra chlorocopper(II) (B) loses one mole of anilinum hydrochoride along with one molecule of aniline. The compound B has a well define structural change taking place in the region of 70–110 °C which is reflected in DSC as well as resistance measurements. The p-methoxy anilinium tetra chlorocopper(II) monohydrate (C) shows solvatochromicity. The absorption maximum of p-methoxy anilinium tetra chlorocopper(II)monohydrate in acetonitrile (460 nm) changes to 570 nm on addition of methanol. The absorption at 570 nm can be switched back to 460 nm by suppression of ligand exchange with addition of hydrochloric acid. Thus, chemically driven optical switching properties can be observed.     

Heptacopper(II) and dicopper(II)-adenine complexes: synthesis,structural characterization,and magnetic properties

The syntheses, crystal structures, and magnetic properties of two new copper(II) complexes with molecular formulas [Cu₇(μ₂-OH₂)₆(μ₃-O)₆(adenine)₆](NO₃)₂·6H₂O (1) and [Cu₂(μ₂-H₂O)₂(adenine)₂(H₂O)₄](NO₃)₄·2H₂O (2) are reported. The heptanuclear compound is composed of a central octahedral CuO₆ core sharing edges with six adjacent copper octahedra. In 2, the copper octahedra shares one equatorial edge. In both compounds, these basic copper cluster units are further linked by water bridges and bridging adenine ligands through N3 and N9 donors. All copper(II) centers exhibit Jahn–Teller distorted octahedral coordination characteristic of a d⁹ center. The study of the magnetic properties of the heptacopper complex revealed a dominant ferromagnetic intra-cluster interaction, while the dicopper complex exhibits antiferromagnetic intra-dimer interactions with weakly ferromagnetic inter-dimer interaction.     

Pd(II) and Pt(II) complexes of 2-(2'-pyridyl)-4,6-diphenylphosphinine: synthesis, structure, and reactivity

The coordination chemistry of the bidentate P,N hybrid ligand 2-(2'-pyridyl)-4,6-diphenylphosphinine (1) towards Pd(II) and Pt(II) has been investigated. The molecular structures of the complexes [PdCl(2)(1)] and [PtCl(2)(1)] were determined by X-ray diffraction, representing the first crystallographically characterized λ(3)-phosphinine-Pd(II) and -Pt(II) complexes. Both complexes reacted with methanol at the P=C double bond at an elevated temperature, leading to the corresponding products [MCl(2)(1H·OCH(3))]. The molecular structure of [PdCl(2)(1H·OCH(3))] was determined crystallographically and revealed that the reaction with methanol proceeds selectively by syn addition and exclusively to one of the P=C double bonds. Strikingly, the reaction of [PdCl(2)(1H·OCH(3))] with the chelating diphosphine DPEphos at room temperature in CH(2)Cl(2) led quantitatively to [PdCl(2)(DPEphos)] and phosphinine 1 by elimination of CH(3)OH and rearomatization of the phosphorus heterocycle.     

Organometallic chemistry of carbaporphyrinoids: synthesis and characterization of nickel(II) and palladium(II) azuliporphyrins

Brief treatment of azuliporphyrins 5 with nickel(II) or palladium(II) acetate in refluxing DMF afforded excellent yields of the related chelates; these novel organometallic compounds retain cross-conjugated borderline aromatic structures as judged by UV-Vis and NMR spectroscopy, and X-ray crystallography.     

Ru(II) and Os(II) nucleosides and oligonucleotides: synthesis and properties

A general and versatile method for the site-specific incorporation of polypyridine Ru(II) and Os(II) complexes into DNA oligonucleotides using solid-phase phosphoramidite chemistry is reported. Novel nucleosides containing a [(bpy)(2)M(3-ethynyl-1,10-phenanthroline)](2+) (M = Ru, Os) metal center covalently attached to the 5-position in 2'-deoxyuridine are synthesized, and their electrochemical as well as photophysical properties are studied. The Ru(II) nucleoside exhibits a rather long-lived excited state in phosphate buffer pH 7.0 (tau = 1.08 micros) associated with a relatively high emission quantum efficiency (phi = 0.051). The solvent dependence of the absorption and emission spectra is consistent with an emissive MLCT state where charge localization takes place on the extended heterocycle-linked phenanthroline. In contrast, the Os(II)-containing nucleoside is quite nonemissive in aqueous environment (tau = 0.027 micros, phi = 1 x 10(-4)). The metal-containing nucleosides are converted into their phosphoramidites and are utilized for the high-yield preparation of modified oligonucleotides. The novel oligonucleotides, characterized by absorption and emission spectroscopy, enzymatic digestion, and electrophoresis, form stable duplexes. Circular dichroism spectra confirm that the global conformation of the double helix is not altered by the presence of these polypyridyl complexes in the major groove. Metal-containing phosphoramidites with predetermined absolute configuration at the octahedral coordination center are synthesized and utilized for the synthesis of diasteromerically pure metal-containing DNA oligonucleotides. Emission spectroscopy suggests a higher protection of the Delta metal center from the bulk solvent and better accommodation within the major groove.     

Aminomethylphosphines in template synthesis on Pt(II), Pd(II), and Hg(II)

Reactions of 5-p-toluidinomethyl-1,3-ditolyl-1,3,5-diazaphosphorinane 1 with Pt(II), Pd(II), Hg(II) salts are reported. Complex formation was followed by template synthesis of novel bicyclic ligand and chelate complexes. Compounds 2 , 3 , 4 have been formed. The mercury complex 4 was also obtained in high yield by electrochemical oxidation of compound 1 at the Hg-anode. Conformational features of new ligands are discussed on the basis of NMR data.     

Bis(2, 2, 2-trichloroethoxy)cobalt(II) and chloro(2, 2, 2-trichloroethoxy) cobalt(II): synthesis and coordination chemistry

Summary Bis(2, 2, 2-trichloroethoxy) cobalt(II) and chloro(2, 2, 2-trichloroethoxy)cobalt(II) [Co(OCH₂CCl₃)₂·L] and [CoCl(OCH₂CCl₃)·L], derivatives (L=tetrahydrofuran, dioxan, triphenylarsine oxide, or pyridine) have been synthesised and characterized. They have tetrahedral geometry both in solution and in the solid state.     

Pt(II) and Pt(IV) amido, aryloxide, and hydrocarbyl complexes: synthesis, characterization, and reaction with dihydrogen and substrates that possess C-H bonds

The Pt(II) amido and phenoxide complexes ((t)bpy)Pt(Me)(X), ((t)bpy)Pt(X)(2), and [((t)bpy)Pt(X)(py)][BAr'(4)] (X = NHPh, OPh; py = pyridine) have been synthesized and characterized. To test the feasibility of accessing Pt(IV) complexes by oxidizing their Pt(II) precursors, the previously reported ((t)bpy)Pt(R)(2) (R = Me and Ph) systems were oxidized with I(2) to yield ((t)bpy)Pt(R)(2)(I)(2). The analogous reaction with ((t)bpy)Pt(Me)(NHPh) and MeI yields the corresponding ((t)bpy)Pt(Me)(2)(NHPh)(I) complex. Reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene at 80 °C results in the formation of the Pt(II) phenylacetylide complex ((t)bpy)Pt(Me)(C≡CPh). Kinetic studies indicate that the reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene occurs via a pathway that involves [((t)bpy)Pt(Me)(NH(2)Ph)][TFA] as a catalyst. The reaction of H(2) with ((t)bpy)Pt(Me)(NHPh) ultimately produces aniline, methane, (t)bpy, and elemental Pt. For this reaction, mechanistic studies reveal that 1,2-addition of dihydrogen across the Pt-NHPh bond to initially produce ((t)bpy)Pt(Me)(H) and free aniline is catalyzed by elemental Pt. Heating the cationic complexes [((t)bpy)Pt(NHPh)(py)][BAr'(4)] and [((t)bpy)Pt(OPh)(py)][BAr'(4)] in C(6)D(6) does not result in the production of aniline and phenol, respectively. Attempted synthesis of a cationic system analogous to [((t)bpy)Pt(NHPh)(py)][BAr'(4)] with ligands that are more labile than pyridine (e.g., NC(5)F(5)) results in the formation of the dimer [((t)bpy)Pt(μ-NHPh)](2)[BAr'(4)](2). Solid-state X-ray diffraction studies of the complexes ((t)bpy)Pt(Me)(NHPh), [((t)bpy)Pt(NH(2)Ph)(2)][OTf](2), ((t)bpy)Pt(NHPh)(2), ((t)bpy)Pt(OPh)(2), ((t)bpy)Pt(Me)(2)(I)(2), and ((t)bpy)Pt(Ph)(2)(I)(2) are reported.     

Azo and azoxythiacrown ethers: synthesis and properties

A series of 16- and 18-membered azo- and azoxythiacrown ethers have been synthesized by reductive macrocyclization of the respective bis(nitrophenoxy)oxaalkanes. The aromatic residues located in the polyether region of the molecule were introduced to macrocyclic skeletons and their affinities toward different groups of metal cations in ion-selective electrodes were described. X-ray structures for one dinitropodand and one azoxybenzothiacrown exhibiting strong π–π and π–H interactions have been found.     

Facile synthesis, structure, and luminescence properties of Pt(diimine)bis(arylacetylide) chromophore-donor dyads

The luminescent complex Pt(dpphen)bis(arylacetylide) complex (1) (dpphen = 4,7-diphenylphenanthroline and arylacetylide = 4-ethynylbenzaldehyde) has been synthesized and characterized structurally and spectroscopically. Complex 1 has been employed in the synthesis of donor-chromophore (D-C) dyads through Schiff base condensations of different anilines to give imine-linked dyads 2-4 and through imine reduction with borohydride, to give the corresponding amine-linked dyads 2a-4a. Crystal structure determinations of 1-4 and 4a establish a distorted square-planar geometry around the Pt(II) ion in each system with cis arylacetylide ligands and a diimine-constrained N-Pt-N bond angle of ca. 79.5 degrees. Complex 1 is strongly emissive having a relative quantum yield (phi) of 36% and an excited-state lifetime of 3.1 micros. In accord with the notion of photoinduced electron transfer from the aniline-based donor to the photoexcited chromophore, the emission of dyads 2-4 and 2a-4a is effectively quenched in all solvents tested. The intense absorption at 400 nm (30000-70000 L/mol.cm) for 2 and 2a has been assigned as an intraligand pi-pi* transition, whereas the lowest-energy transitions for all other dyads correspond to Pt-to-pi(diimine) MLCT transitions. Although the dyads can be synthesized in a facile manner, photolysis experiments reveal that both the imine and amine linkages are photochemically unstable, resulting in hydrolysis and regeneration of the aldehyde-containing chromophore 1.