Investigation of the Thermodynamic Properties of the Cationic Surfactant CTAC in EG + Water Binary Mixtures

To understand the thermodynamic characteristics of cationic surfactants in binary mixtures, the aggregation behavior of hexadecyltrimethylammonium chloride (CTAC) has been investigated in ethylene glycol (EG) + water solvent mixtures at different temperatures and EG to water ratios. The critical micelle concentration (CMC) and degree of counter ion bonding (β) were calculated from electrical conductivity measurements. An equilibrium model for micelle formation was applied to obtain the thermodynamic parameters for micellization, including the standard Gibbs energies of micellization (DG_mic^o)\Delta G_{\mathrm{mic}}^{\mathrm{o}}), standard enthalpies of micelle formation (DH_mic^o)\Delta H_{\mathrm{mic}}^{\mathrm{o}}) and standard entropies of micellization (DS_mic^o)\Delta S_{\mathrm{mic}}^{\mathrm{o}}). Our results show that DG_mic^o\Delta G_{\mathrm{mic}}^{\mathrm{o}} is always negative and slightly dependent on temperature. The process of micellization is entropy driven in pure water, whereas in EG + water mixtures the micellization is enthalpy driven.     

Physical Properties of Binary Alcohol + Ionic Liquid Mixtures at Several Temperatures and Atmospheric Pressure

In this study, densities and speeds of sound were measured over the whole composition range, at T = (298.15, 303.15 and 308.15) K and p = 0.1 MPa, for the binary systems of ethanol, or 1-propanol, or 2-propanol and 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, or 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide. The density and speed of sound data were used to calculate the corresponding excess molar volumes and excess molar isentropic compressions, which were fitted with the Redlich–Kister equation. From the obtained results, a discussion was carried out in terms of interactions and structure factors in these binary mixtures.     

Viscosities for Ionic Liquid Binary Mixtures with a Common Ion

At present, there is a considerable amount of work devoted to the study of the thermophysical properties of pure ionic liquids, which contrasts with the few data available for their mixtures. One of the most appealing characteristics of ionic liquids is the capability of subtly changing the chemical structure of the cation and anion in order to design appropriate solvents for specific applications. Mixtures of ionic liquids increase enormously this specificity, due to the unlimited combinations that arise from mixing two or more ionic liquids. In this context, the study of the thermophysical properties of these mixtures is revealed as a fundamental task. In this work the viscosities of the ionic liquid binary mixtures with a common ion ([C₆mim] + [C₂mim])[BF₄], ([C₆mim] + [C₄mim])[BF₄], [C₄mim]([BF₄] + [MeSO₄]) and [C₄mim]([PF₆] + [BF₄]) were determined within the temperature range (298.15–308.15) K. The temperature dependence of the viscosity for pure liquids is analyzed by means of the Vogel-Tammann-Fulcher equation and several mixing rules are applied for the mixtures.     

Volumetric, Ultrasonic and Transport Properties of Binary Liquid Mixtures Containing Dimethyl Formamide at 303.15 K

Excess volumes （v^E）, ultrasonic velocities （u）, isentropic compressibility （△Ks） and viscosities （η） for the binary mixtures of dimethyl formamide （DMF） with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at 303.15 K were studied. Excess volume data exhibit an inversion in sign for the mixtures of dimethyl formamide with 1,2- and 1,3-dichlorobenzenes and the property is completely positive over the entire composition range for the mixtures of dimethyl formamide with 1,2,4-trichlorobenzene, o-nitrotoluene and m-nitrotoluene. On the other hand, the quantity is negative for the mixtures of dimethyl formamide with chlorotoluenes. Isentropic compressibility （Ks） has been computed for the same systems from precise sound velocity and density data. Further, deviation of isentropic com- pressibility （△Ks） from ideal behavior was also calculated. AKs values are negative over the entire volume fraction range in all the binary mixtures. The experimental sound velocity data were analysed in terms of Free Length Theory （FLT） and Collision Factor Theory （CFT）. The viscosity data were analysed on the basis of corresponding state approach. The measured data were discussed on the basis of intermolecular interactions between unlike molecules.     

Thermodynamic Properties of Binary Liquid Mixtures of n-Dodecane with an Alkan-1-ol or an Alkan-2-ol at 298.15 K: A Comparative Study

Experimental densities (ρ), viscosities (η), and speeds of sound (u) of the binary mixtures of n-dodecane with an alkan-1-ol (hexan-1-ol, heptan-1-ol, octan-1-ol) or an alkan-2-ol (hexan-2-ol, heptan-2-ol and octan-2-ol) were measured over the whole mixture composition range at T = 298.15 K. From these data, the excess molar volume ( $ V_{\text{m}}^{\text{E}} $ V m E ), deviations in viscosity (Δη), and excess isentropic compressibility ( $ \kappa_{S}^{\text{E}} $ κ S E ) have been calculated. The results were fitted by means of the Redlich–Kister equation, in order to estimate the binary coefficients and standard errors. Differences among these binary systems are ascribed to the different association abilities of the alkan-1-ols and alkan-2-ols. Experimental data on the constituted binaries were analyzed using McAllister’s multi-body interaction model, the Jouyban–Acree model, the Prigogine–Flory–Patterson theory, and the Bloomfield and Dewan model. The experimental and calculated quantities are used to study the nature of mixing behavior among the mixtures.     

Dielectric Parameters and Hydrogen Bond Interaction Study of Binary Alcohol Mixtures

The formation of hydrogen bonds between different types of molecules in binary alcohol mixtures (methyl alcohol, ethyl alcohol, ethylene glycol, propylene glycol and glycerol) have been investigated (each system at 21 mixture concentrations) by an analysis of their dielectric parameters. The static dielectric constant ε _o, limiting high-frequency dielectric constant ε _∞, excess dielectric parameters ε _o^E and ε _∞^E, effective Kirkwood correlation factor g ^eff, and corrective Kirkwood correlation factor g _f of the binary alcohol mixtures were determined at 25 °C in order to explore hydrogen-bond interactions and the strength of molecular connectivities between unlike alcohol molecules and their dipole alignment. These results confirm that the different alcohol mixtures form hydrogen-bonded structures, which are strongly influenced by the numbers of hydroxyl groups and carbon atoms of the alcohol molecules and vary with the concentrations of the mixtures.     

Electrochemical Properties of LiAsF6 Solutions in Propylene Carbonate—Acetonitrile Binary Mixtures

Russian Journal of Electrochemistry - Conductivity of LiAsF6 solutions in propylene carbonate—acetonitrile binary mixtures containing 0.2 to 1.4 mol/kg of ionophore is measured at...     

Acoustical Studies of Binary Liquid Mixtures of Cyclopentane with 1-Alkanol at Different Temperatures and Different Approaches for Ideal Mixing Laws

Speeds of sound have been measured in liquid mixtures of cyclopentane with 1-propanol, with 1-pentanol, and with 1-heptanol across the entire composition range at temperatures of (298.15, 308.15 and 318.15) K and atmospheric pressure. The experimental speed of sound data were used to estimate the isentropic compressibility κ _S for all mixtures. The molar volumes were multiplied by the corresponding isentropic compressibilities to obtain estimates of the molar compressibilities K _S,m. The corresponding K_S,m^EK_{S,\mathrm{m}}^{\mathrm{E}} values have also been calculated. Theoretical values of the speeds of sound were estimated using theories and empirical relations. Deviations of the speed of sound, u ^D, from the values calculated by different approaches for ideal mixing have been obtained for all mole fractions.     

Volumetric Properties of Binary Mixtures of Acetonitrile and Chloroalkanes at 25°C and Atmospheric Pressure

Excess molar volumes for binary mixtures of acetonitrile + dichloromethane, acetonitrile + trichloromethane, and acetonitrile + tetracloromethane at 25°C have been used to calculate partial molar volumes , excess partial molar volumes , and apparent molar volumes of each component as a function of composition. The V _m ^Evalues are negative over the entire composition range for the systems studied. The applicability of the Prigogine–Flory–Patterson theory was explored. The agreement between theoretical and experimental results is satisfactory for the systems with dichloromethane and tetrachloromethane. For the unsymmetrical behavior of the system with trichloromethane, however, the agreement is poor.     

Measurement of Some Thermodynamic and Acoustic Properties of Binary Solutions of N,N-Dimethylformamide with 1-Alkanols at 30°C and Comparison with Theories

Densities, and ultrasonic velocities, uof binary mixtures of N,N-dimethylformamide (DMF) + methanol, + ethanol, + 1-propanol, + 1-butanol, + 1-pentanol, and + 1-hexanol have been measured at 30°C. The ultrasonic velocities have been compared with values calculated from the free-length theory ( FLT) due to Jacobson and collision-factor theory ( CFT) due to Schaaffs. The measured data are used to compute adiabatic compressibility (k _s), deviation in adiabatic compressibility (k _s), intermolecular free length (L _f), molar volume (V _m), and available volume (V _a). The excess molar volume ( V _m ^E) and excess free length (L _f ^E) are also evaluated. For all systems, these results were satisfactorily correlated by the Redlich–Kister polynomial. These parameters are used to discuss dissociation of the self-associated 1-alkanol molecules and the formation of aggregates between unlike molecules through C=O...H–O hydrogen bonding.     

Thermodynamic Properties of Alloys of the Binary Bi—Yb System

The thermochemical properties of melts of the binary Bi—Yb system were studied by the calorimetry method over the concentration ranges 0 < x_Yb < 0.43 at 1000–1270 K and 0.8 < x_Yb < 1 at 1100–1140 K. It was shown that significant negative heat effects of mixing are characteristic features for these melts. A range 0 < x_Yb < 0.19 of the Bi—Yb phase diagram was investigated by the DTA method. Using the regular associated solution (RAS) model, the activities of components, Gibbs energies and the entropies of mixing in the alloys, and the phase diagram of this system were calculated. They agree with the data from literature.     

The Effect of the Molecular Size and Shape on the Volume Behavior of Binary Liquid Mixtures. Branched and Cyclic Alkanes in Heptane at 298.15 K

Excess molar volumes V ^E for 40 mixtures of heptane with a liquid alkane and apparent molar volumes in heptane for eight solid alkanes have been obtained at 298.15 K. They include five linear, 30 branched-chain, and 13 cyclic alkanes. Almost all systems exhibit negative V ^E values. For mixtures with open chain alkanes, V ^E increases from C5 to C7 and then decreases. A similar trend is shown by mixtures with cycloalkanes. V ^E values are compared with known H ^E data for mixtures with heptane and tetrachloromethane. Signs and trends of V ^E and H ^E are correlated with the free volume and interactional terms of the Flory theory. The partial molar volumes at infinite dilution in heptane, V°, have also been obtained and discussed together with literature data on other hydrocarbons and polar compounds. The calculated contributions to V° by CH₃, CH₂, CH and C groups are compared with previously determined contributions of polar groups. The lower contributions of the latter groups are explained with the volume contraction caused by dipole-induced dipole interaction. The volume effects associated with branching and cyclization have been evaluated and compared with the corresponding effects on solvation enthalpy. The branching effect, in the order of magnitude of few cm³·mol^?1, and the larger negative values of cyclization volumes, down to ?24 cm³·mol^?1, are discussed in terms of packing and solute–solvent interactions, in analogy to polar organic solutes either in heptane and tetrachloromethane. A negative cyclization effect is also exhibited by the solvation enthalpies.     

The Number of Water-Water Hydrogen Bonds in Water-Tetrahydrofuran and Water-Acetone Binary Mixtures Determined by Means of X-Ray Scattering

The liquid structures of water-tetrahydrofuran (THF) and water-acetone binary mixtures were investigated by the X-ray scattering method. Comparison of the X-ray scattering data revealed that only one kind of intermolecular water-organic molecule interaction is commonly involved throughout all mole fractions of these liquid mixtures, in addition to the intermolecular water-water and organic molecule-organic molecule interactions, which are present in neat water and organic liquids, respectively. On the basis of this finding, we proposed a new analytical method for studying liquid mixtures. By this method the structural information on the intermolecular water-organic molecule interaction as well as the concentrations of the intermolecular water-water, water-organic molecules, and organic molecule-organic molecule interactions were obtained. Combining the concentrations of the intermolecular water-water interaction with the concentrations of water in the liquid mixtures, the number of water-water hydrogen bonds at various mole fractions was experimentally determined for the first time. From the dependence of the number of water-water hydrogen bonds on the composition of the liquid mixtures, the change of the size of the self-associated water-water clusters was deduced.     

Conductance and Thermodynamic Study of Thallium and Silver Ion Complexes with Crown Ethers in Different Binary Acetonitrile–Water Solvent Mixtures

The complexation reactions between Ag⁺ andTl⁺ ions with 15-crown-5 (15C5) and phenyl-aza-15-crown-5(PhA15C5) have been studied conductometrically in 90%acetonitrile-water and 50% acetonitrile - water mixed solvents attemperatures of 293, 298, 303 and 308 K. The stability constants of theresulting 1 : 1 complexes were determined, indicating that theTl⁺ complexes are more stable than the Ag⁺complexes. The enthalpy and entropy of crown complexation reactions were determined from the temperature dependence of the complexation constants.The enthalpy and entropy changes depend on solvent composition and the T S⁰ _o–H⁰ plotshows a good linear correlation, indicating the existence of entropy –enthalpy compensation in the crown complexation reactions.     

Densities and Refractive Indices of Binary Mixtures of Olive Oil + Alkanols at 298.15 K

Densities and refractive indices of mixing of olive oil with the alkanols: methanol, ethanol, 1-propanol, 2-propanol and 1-butanol, have been measured as a function of the composition at T = 298.15 K. Excess molar volumes, $ V_{\text{m}}^{\text{E}} $ , and deviation in refractive index, Δn _D, were calculated and correlated by a Redlich–Kister type function, to derive the coefficients and estimate the standard error. For mixtures of olive oil with alkanols, $ V_{\text{m}}^{\text{E}} $ is positive, except with ethanol and methanol where a sigmoidal variation is observed. Δn _D is positive over the entire range of mole fraction. The effect of chain length of the alkanols on the excess molar volumes and deviation in refractive index of the mixtures with olive oil are discussed.     

Micellization of Alkyltriphenylphosphonium Bromides in Ethylene Glycol and Diethylene Glycol + Water Mixtures: Thermodynamic and Kinetic Investigation

The thermodynamics of micellization and other micellar properties of alkyl- (C₁₀-, C₁₂-, C₁₄- and C₁₆-) triphenylphosphonium bromides in water + ethylene glycol (EG) (0 to 30% v/v) mixtures over a temperature range of 298 to 318 K and cetyltriphenylphosphonium bromide in water + diethylene glycol (DEG) mixtures (0 to 30% v/v) at 298 K have been studied conductometrically. In all cases, an increase in the percentage of co-solvent results in an increase in the cmc values. On the basis of these results, the thermodynamic parameters, the Gibbs energy (ΔG _m^o), enthalpy (ΔH _m^o) and entropy (ΔS _m^o) of micellization have been evaluated. In addition to the conductivity measurements, kinetic experiments have also been done to determine the dependence of observed rate constant for the nucleophilic substitution reaction of p-nitrophenyl acetate and benzohydroxamate ions in the presence of the surfactant cetyltriphenylphosphonium bromide with a varying concentration of EG and DEG ranging from 0 to 50% v/v at pH=7.9 and 300 K. All of the reactions followed pseudo-first-order kinetics. An increase in the surfactant concentration results in an increase in the reaction rate and for a given surfactant concentration, the rate constant decreases as the concentration of co-solvent in the mixture increases. The kinetic micellar effects have been explained by using the pseudophase model. The thermodynamic and structural changes originating from the presence of solvents control the micellar kinetic effects.     

Competition of Viscosity Correlation Equations in Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

Shear viscosity deviations Δη have been investigated by using density (ρ) and kinematic viscosity (ν) measurements for isobutyric acid + water (IBA + W) mixtures over the entire range of mole fractions at atmospheric pressure and at two temperatures (301.15 and 315.15 K). This study extends the temperature range from the five other temperatures investigated in a previous work, 1.055 K≤(T−T _c )≤14.055 K, both far from and close to the critical temperature. This system exhibits very large positive values of Δη due to increased hydrogen bonding interactions and the correlation length between unlike molecules in the critical region, and to very large differences between the molar volumes of the pure components at low temperatures. The results were also fitted with the Redlich–Kister polynomial equations and the recently proposed Herráez correlation equation. Comparisons between the two models at different temperatures and number of parameters are discussed. We note that, in this system where the shear viscosity η as a function of mole fraction (x ₁) of IBA presents a maximum, experimental data are in agreement with the two correlation models when more than three parameters are employed, especially for temperatures far from the critical temperature.