一种规整单壁碳纳米笼的合成与改性及其对水体结晶紫分子的吸附性能

运用催化气相沉积法及继之的纯化处理,获得了具有规整外型、中空及密集阵列的单壁三维结构碳纳米笼(carbon nanocages,CNCs)。尝试将其用于水体阳离子染料结晶紫(crystal violet,CV)的吸附去除,实验条件下其上CV的饱和吸附容量可达542.6 mg·g~(-1)。进一步以十二烷基苯磺酸钠(sodium dodecyl benzene sulfonate,SDBS)对制得的CNCs表面进行亲水性改性,观察到了改性CNCs对CV吸附性能的明显提升,相同条件下其上CV的饱和吸附容量显著提升至748.5 mg·g~(-1)。运用多种表征及测定,探明改性前后CNCs的组成和结构,并尝试与其吸附性能关联,在此基础上探明改性及促进机制,为进一步研发具有实用意义的污水处理技术提供有益参考。     

双层SiO2包覆Fe3O4复合材料的制备及其染料吸附性能

采用改进的Stober法合成了多孔结构的双层SiO₂包覆Fe₃O₄复合材料,利用TEM、XRD、VSM和氮吸附-脱附实验对其结构与性能进行分析,进而研究其对染料的吸附性能。研究结果表明,双层SiO₂包覆Fe₃O₄复合材料的比表面积和磁饱和强度分别为308 m²·g^-1和45.5 emu·g^-1;当罗丹明B的初始浓度从25 mg·L^-1提高到250 mg·L^-1时,复合材料对其饱和吸附量从24.0 mg·g^-1增大到112.4 mg·g^-1,而亚甲基蓝的初始浓度从25 mg·L^-1提高到500 mg·L^-1时,对其饱和吸附量从22.0 mg·g^-1增大到235.1 mg·g^-1;随着溶液pH值增大,复合材料对罗丹明B的饱和吸附量增加,而对亚甲基蓝的饱和吸附量变化不明显;温度在20~40 ℃范围内复合材料的吸附量较大。     

双层SiO2包覆Fe3O4复合材料的制备及其染料吸附性能

采用改进的Stober法合成了多孔结构的双层SiO₂包覆Fe₃O₄复合材料,利用TEM、XRD、VSM和氮吸附-脱附实验对其结构与性能进行分析,进而研究其对染料的吸附性能。研究结果表明,双层SiO₂包覆Fe₃O₄复合材料的比表面积和磁饱和强度分别为308 m²·g^-1和45.5 emu·g^-1;当罗丹明B的初始浓度从25 mg·L^-1提高到250 mg·L^-1时,复合材料对其饱和吸附量从24.0 mg·g^-1增大到112.4 mg·g^-1,而亚甲基蓝的初始浓度从25 mg·L^-1提高到500 mg·L^-1时,对其饱和吸附量从22.0 mg·g^-1增大到235.1 mg·g^-1;随着溶液pH值增大,复合材料对罗丹明B的饱和吸附量增加,而对亚甲基蓝的饱和吸附量变化不明显;温度在20~40 ℃范围内复合材料的吸附量较大。     

表面官能团化增强碳纳米笼超级电容器性能

以具有多级孔结构、高比表面积、良好导电性等特征的碳纳米笼（CNCs）为前体,采用硝酸氧化法在CNCs表面引入含氧官能团。以CNCs为超级电容器电极材料,在相同电流密度下,官能团化样品的比电容显著高于纯CNCs;在1A·g^-1下比电容最高可达到255F·g^-1,比纯CNCs的188F·g^-1增加了34%,这表明表面含氧官能团化能够显著提高CNCs的超级电容器比电容。在100A·g^-1的大电流密度下,硝酸氧化后CNCs的比电容保持在111~167F·g^-1,表明具有良好的耐大电流充放电性能。在10A·g^-1的电流密度下循环10000圈后,CNC-6M样品的比电容由196F·g^-1下降到176F·g^-1,样品的比电容仍保留90%,具有良好的循环稳定性。表面含氧官能团化CNCs所表现出的这种优异的超级电容器性能归因于CNCs的多尺度分级孔结构、高比表面积、良好的导电性、表面亲水性含氧官能团化带来的浸润性提高和引入的赝电容。     

高岭土磁性复合材料表面印迹聚合物选择性吸附分离环丙沙星

以氨基改性的磁性高岭土为基质材料,利用电子转移产生催化剂的原子转移自由基聚合法制备磁性高岭土表面印迹聚合物（MMIPs）。通过FTIR、TEM、TGA、XRD和VSM等方法对其物理化学性质进行表征,其比表面积112 m²·g^-1,且具有较好的热稳定性、超顺磁性（M_s=13.365 emu·g^-1）。吸附性能研究表明,准二级动力学模型能较好地描述MMIPs对环丙沙星（CIP）吸附动力学行为,Langmuir等温模型能较好地拟合MMIPs对CIP的吸附平衡数据,25℃时MMIPs的单分子层吸附容量为89.36 mg·g^-1。选择性实验研究表明,MMIPs对CIP具有较好地选择识别性。结合高效液相色谱分析技术,MMIPs已成功应用于鲜鱼样品中痕量CIP的分离、富集和回收,CIP的回收率为92.15%。     

N掺杂MnO2/碳布复合材料的制备及储锂性能

采用碳布（CC）为柔性基底,通过水热法制备了MnO₂/CC及N掺杂MnO₂/CC无黏结剂负极材料,借助X射线衍射（XRD）、扫描电镜（SEM）、X射线光电子能谱（XPS）、比表面积测试和恒电流充放电对材料进行了结构表征及电化学性能测试。结果表明N掺杂MnO₂/CC具有良好的倍率性能和循环稳定性。在0.1 A·g^-1的电流密度下,其首次充电比容量为948.8 mAh·g^-1,经过不同倍率测试后电流密度恢复至0.1 A·g^-1时仍然保持有907.9 mAh·g^-1的可逆比容量,容量保持率为95.7%。在1 A·g^-1的大电流密度下,其首次充电比容量为640.3 mAh·g^-1,循环100次后仍然保持有529.9 mAh·g^-1的可逆比容量,容量保持率为82.8%,可逆比容量远高于商用MnO₂。     

锌镍铝水滑石微球的制备及吸附性能

以Zn（NO₃）₂·6H₂O、Ni（NO₃）₂·6H₂O、Al（NO₃）₃·9H₂O和尿素为原料,采用一步水热法制备分散性良好的三元锌镍铝水滑石（ZnNiAl-LDHs）微球。通过X射线衍射（XRD）、傅里叶转换红外光谱（FTIR）、场发射扫描电镜（FESEM）、透射电镜（TEM）和氮气吸附-脱附等测试手段对样品的结构和形貌进行表征,并比较ZnNiAl-LDHs和ZnAl-LDHs对甲基橙（MO）的吸附性能。结果表明,ZnNiAl-LDHs是由纳米片组成、具有3D结构的微球,粒径为1~2.5 μm,比表面积为156 m²·g^-1,远大于ZnAl-LDHs的比表面积38 m²·g^-1;ZnNiAl-LDHs和ZnAl-LDHs对甲基橙的饱和吸附量分别为329.60和143.47 mg·g^-1,ZnNiAl-LDHs表现出更强的吸附能力,其吸附等温线和吸附动力学分别符合Langmuir等温线模型和准二级动力学模型。     

季铵型阳离子纤维素对水中腐殖酸的吸附

以异丙醇为分散剂,碱纤维与3-氯-2-羟丙基三甲基氯化铵反应,醚化接枝制得一种环境功能材料-季铵型阳离子纤维素（QACC）。用红外光谱、X-射线衍射和电镜扫描对材料的结构进行了表征：红外光谱中1644cm^-1处存在明显的季铵基的弯曲振动。经过改性的QACC结晶度下降,比表面积增加。研究了QACC对腐殖酸的吸附性能：pH=8、318K时,QACC对腐殖酸的饱和吸附容量为622mg·g^-1;其表观活化能为6.45kJ·mol^-1;吸附符合Lagergren二级动力学方程,吸附速率随温度升高而加快;吸附等温模型符合Langmuir等温式,为单分子层吸附;吸附腐殖酸的ΔH、ΔS、ΔG分别为：20.3kJ·mol^-1、77.8J·mol^-1·K-1、-4.44kJ·mol^-1,吸附主要为化学吸附。     

沉淀剂对水热法制备分等级氧化铁纳米结构及其Cr（Ⅵ）吸附性能的影响

以硫酸铁为铁源、硫脲、氟化钠和尿素分别为沉淀剂,采用水热法成功地制备了分等级微米级球状氧化铁粒子、六方柱状粒子相互交织的微米级氧化铁团聚体等。采用X射线衍射、扫描电镜、N₂吸附-脱附、磁滞回线和UV紫外分光光度计等测试手段,对比研究了上述沉淀剂对产物微结构、形貌、织构性质及其对剧毒Cr（Ⅵ）吸附性能的影响。结果表明,以硫脲为沉淀剂制得氧化铁的结晶度最高,其晶粒大小为49.7nm,并具有最高的比表面积13.0m₂·g^-1、最大的孔容0.092cm³·g^-1和平均孔径28.6nm;该氧化铁具有最佳的Cr（Ⅵ）吸附性能,30min即达到吸附平衡,饱和吸附量达202.8mg·g^-1,并且符合Langmuir单分子层吸附模型;该氧化铁还具有一定的磁性,通过外加磁场可以实现吸附Cr（Ⅵ）后的吸附剂与溶液的彻底分离,因而在重金属废水处理领域显示出良好的应用前景。     

高比表面积介孔网状氧化镁的制备、表征及对废水中Pb(Ⅱ)的吸附性能和机理

以天然水菱镁矿为原料，通过"煅烧-水化-煅烧"的简单方法制备了高比表面积介孔网状MgO，且实验过程中无须加入任何试剂。系统性研究了氧化镁用量、吸附时间、吸附温度及pH对氧化镁吸附模拟废水中铅离子吸附性能的影响，揭示了吸附机理，并考察了氧化镁对多种离子的吸附效果。结果表明：该氧化镁吸附剂具有188 m²·g^-1的高比表面积和0.85 cm³·g^-1的高孔体积，平均孔径为12.33 nm，其吸附动力学和等温线数据与伪二级模型和Langmuir模型高度吻合，表明重金属离子在氧化镁上为单层化学吸附。MgO介孔网状结构表现出对Pb（Ⅱ）的高吸附性能，最大吸附量为7 431.5 mg·g^-1，该数值远高于其他报道的基于MgO吸附剂的数值，铅去除率高达99.8%以上。介孔网状MgO的吸附机理主要是羟基官能团以及Mg（Ⅱ）与MgO表面重金属离子之间的离子交换所致。另外，该氧化镁可同时吸附多种离子，对Cd、Cr、Ni、As、Co、P、Se、Be、Bi、Cu、Fe、Mn、V、Zn、Al离子均具有优异的吸附性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.