基于Nile Red的线粒体靶向性增强型硫化氢荧光探针及其细胞成像

硫化氢作为一类重要的信号分子, 除了在神经系统、炎症应激和心血管等生理系统方面发挥着调控作用之外, 还对线粒体ATP酶的活性和抗氧化应激起着重要的调节作用. 为了实时定量的检测线粒体中的硫化氢, 本文报道了一个可以定位于线粒体并检测外源硫化氢的荧光增强型荧光探针NRS. 探针NRS以尼尔红为母体通过引入吸电子的2,4-二硝基苯结构单元构建了基于光诱导电子转移(PET)机理的荧光探针. 探针NRS表现出快速的硫化氢响应性和较高的硫化氢选择性, 不受其他活性氧、活性氮、阴离子以及金属离子等物种的干扰. 随着硫化钠的加入, 探针NRS的最大吸收峰由565 nm蓝移至550 nm, 溶液由紫色变为红色; 同时在640 nm处的荧光光谱强度不断增强, 当硫化钠的浓度处于32～176 μmol·L^-1范围内, 荧光强度与硫化钠的浓度呈现出较好的线性关系. 细胞染色实验表明, 探针NRS能够进入到细胞内部, 具有细胞膜的透过性; 与Rh123进行共定位成像进一步证明探针NRS能够定位于细胞的线粒体中并检测硫化氢.     

一种基于分子内质子转移发色团的硫化氢荧光探针的合成及其生物成像研究

硫化氢在许多生理过程中扮演十分重要的角色,因此检测和成像生物体内的硫化氢具有十分重要的意义。该研究成功制备了一种基于分子内质子转移发色团的硫化氢荧光探针(DHCD)。在PBS-DMSO(磷酸盐-二甲基亚砜,99∶1,体积比,pH 7.45)缓冲溶液中,DHCD的荧光强度与NaHS的浓度在0～10μmol/L范围内呈现良好的线性关系,检出限为0.84μmol/L。该探针对硫化氢的响应具有较大的Stokes位移(～165 nm)、高灵敏度和选择性。此外,合成的探针拥有良好的细胞渗透性和低的毒性,可用于HeLa细胞中硫化氢的荧光成像,在生物分析中具有潜在应用价值。     

二甲双胍硫化氢盐的合成、结构鉴定和稳定性研究

随着硫化氢作为人体内重要内源性气体信号分子研究的不断深入,有机小分子硫化氢供体的研究也取得了较大的进展,但目前尚无一种硫化氢供体药物上市.二甲双胍是临床上治疗糖尿病的一线药物,近年来被报道还具有减肥、抗癌、抗衰老等多种生理活性.鉴于硫化氢和二甲双胍在重大疾病治疗中的良好前景,设计了一种全新的硫化氢供体二甲双胍硫化氢盐,前人对该类有机碱硫化氢盐的系统研究几乎为空白,更无将其作为硫化氢供体的报道.首先将二甲双胍盐酸盐处理得到二甲双胍游离碱,再与硫化氢反应形成二甲双胍硫化氢盐.通过氢谱、碳谱、元素分析及X单晶衍射对其进行了结构确证.采用碘量法、醋酸铅法和荧光亚甲蓝法测定了二甲双胍硫化氢盐中硫化氢的含量,均大于96.00%;采用高效液相色谱(HPLC)测定了二甲双胍硫化氢盐中二甲双胍的含量大于98.50%,且二甲双胍硫化氢盐的溶液及固体均相对稳定.上述研究结果表明,二甲双胍硫化氢盐有望作为一种新结构类型的硫化氢供体进行深入的研究和开发.     

一个基于苯并噻唑的铜离子荧光探针的合成、晶体结构和光谱性质

合成和表征了一个苯并噻唑类的荧光探针N-(4-(苯并噻唑-2-基)苯基)-2-((2-羟乙基)(吡啶-2-甲基)氨基)乙酰胺(FL),用光谱法研究了它与各种金属离子的识别特性。结果表明:FL对Cu2+具有较高的选择性和灵敏度,并且对Cu2+的识别不受其它金属离子的干扰。FL与Cu2+形成配合物的结合比为1∶1,其荧光强度与Cu2+浓度(3.8~9.6μmol·L-1)呈现较好的线性关系,而且它还可应用于自来水和湖水等水体样品中Cu2+的检测。     

常见阳离子分析法的研究

一、概述硫化氢系统定性分析法自 R.Fresenius 于1841年创立迄今已有百余年。虽然它具有系统严整和适于教学等优点,但是存在操作繁杂费时和硫化氢污染空气等缺点,因而许多化学家致力于新方法的研究,先后提出了一些新的分析方法,如 F.Feigl 的点滴试验,     

几种古老的气体发生装置

十八世纪末,硫化氢气体因被用作分析试剂出了名,随之而来的是需要有一种连续产生硫化氢气体的仪器装置,许多化学家为之努力工作,发明了不少仪器装置,成为现代气体发生器的先驱。格里芬（J.J.Griffin）曾经介绍过一种气体瓶（见图1）,它由两个圆球组成,下球内装硫化亚铁固体,从上球口加人足够量的酸就能与硫化亚铁发生反应产生硫化氢气体。     

纳米分子筛的合成及硫化氢吸附性能

利用无模板水热法合成纳米尺寸的小孔SOD型和大孔X型分子筛, 并考察了其硫化氢脱除性能. 通过对比两种分子筛的硫化氢吸附性能, 证实分子筛对硫化氢的吸附主要集中于孔道内和可及的活性位. 考察了晶粒尺寸、 体积空速和吸附温度等因素对硫化氢吸附的影响, 发现纳米尺寸X型分子筛具有更大的硫容, 并且在低温和低空速下分子筛中的硫化氢分子易于脱除. 随后对纳米X型分子筛进行了金属离子交换改性, 发现Cu改性的分子筛硫容优于其它离子改性的吸附剂, 能达到20.6 mg/g. NaX-N和Cu-NaX-N再生后的硫容分别为新鲜分子筛的62.4%和78.5%.     

一个基于苯并噻唑的铜离子荧光探针的合成、晶体结构和光谱性质（英文）

合成和表征了一个苯并噻唑类的荧光探针N-(4-(苯并噻唑-2-基)苯基)-2-((2-羟乙基)(吡啶-2-甲基)氨基)乙酰胺(FL),用光谱法研究了它与各种金属离子的识别特性。结果表明:FL对Cu2+具有较高的选择性和灵敏度,并且对Cu2+的识别不受其它金属离子的干扰。FL与Cu2+形成配合物的结合比为1∶1,其荧光强度与Cu2+浓度(3.8~9.6μmol·L-1)呈现较好的线性关系,而且它还可应用于自来水和湖水等水体样品中Cu2+的检测。     

改性黏土负载多乙烯多胺对H_2S的高效捕集

以工业建材级黏土矿石粉为原料,经酸处理或煅烧改性后,利用其多孔性负载多乙烯多胺制得吸附材料,并考察了其硫化氢脱除性能.实验结果表明,经400℃煅烧改性的材料的硫化氢脱除效果最佳.考察了负载方法、吸附温度、水蒸气预处理和负载量等因素对吸附的影响,发现在较低温度以及预加湿的情况下,硫化氢的脱除效果最显著,脱除率接近100%.负载量为33.3%的吸附剂的穿透硫容及饱和硫容均优于其它负载量的吸附剂.再生实验表明,吸附剂可以在较低温度下轻易再生,且多次再生后脱硫效果无显著下降.红外光谱和比表面积测试结果表明,该吸附剂对硫化氢的吸附以化学吸附为主.     

二氧化锡中空微球用于快速灵敏检测硫化氢

以氨基酚醛树脂球作模板,通过一种简单的模板法制备了具有中空微球(HMS)结构的二氧化锡;将其涂覆于氧化铝陶瓷管金电极表面,制得一种新型薄膜式硫化氢传感器.采用X射线衍射(XRD)及透射电子显微镜(TEM)表征了材料的微观结构和形貌,并考察了二氧化锡中空微球(Sn O2HMS)的气敏性能.结果表明,二氧化锡中空微球对硫化氢气体表现出良好的气敏特性.在最佳工作温度(200℃)下,所制作的传感器对142.6 mg/m3硫化氢的响应值高达97.13%,响应时间为22 s.该传感器对硫化氢的响应线性范围为0.2852~142.6 mg/m3,相关系数为0.9931,检出限达到0.1549 mg/m3,且几乎不受环境湿度和温度的影响,具有良好的重现性和选择性.对养殖场中硫化氢气体连续监测10个月后,传感器响应信号衰减了5.4%,表明该传感器具有长期稳定的使用寿命,可实现远程监测的实际应用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.