Ultrasonic emulsification of eucalyptus oil nanoemulsion: Antibacterial activity against Staphylococcus aureus and wound healing activity in Wistar rats

The plant derived essential oil nanoemulsion was prepared using a mixture of components containing eucalyptus oil as organic phase, water as continuous phase, and non ionic surfactant, Tween 80, as emulsifier at a particular proportion of 1:1 v/v%. The ultrasonication was applied for varied processing time from 0 to 30 min to study the effect of time on the formation of nanoemulsion and physical stability of formulation by this method. The transparency and stability of emulsion was enhanced when the sonication time was increased compared to hand blender emulsion. The most stable nanoemulsion was obtained in 30 min sonication having the mean droplet diameter of 3.8 nm. The antibacterial studies of nanoemulsion against Staphylococcus aureus by time kill analysis showed complete loss of viability within 15 min of interaction. Observations from scanning electron microscopy of treated bacterial cells confirmed the membrane damage compared to control bacteria. Furthermore, the wound healing potential and skin irritation activity of the formulated nanoemulsion in Wistar rats, suggested non-irritant and higher wound contraction rate with respect to control and neomycin treated rats. These results proposed that the formulated system could be favourable for topical application in pharmaceutical industries.     

Response surface methodology for optimization of cinnamon essential oil nanoemulsion with improved stability and antifungal activity

The optimum formulation and ultrasonic condition for fabrication of cinnamon essential oil (CEO) nanoemulsion were determined using Response Surface Methodology (RSM). The CEO nanoemulsions were formed using an ultrasonic bath (43 kHz at power output of 210 W) and an ultrasonic probe (24 kHz at power of 400 W). Probe ultrasonication outperformed bath ultrasonication since it produced nanoemulsions with smaller droplet size, narrower size distribution as measured using polydispersity index (PDI), and higher viscosity. The influences of sonication time of 180.23–351.77 s, temperature of 4.82–45.18 °C, and Tween® 80 concentration of 1–3% w/w on the droplet size, PDI, and viscosity were investigated using RSM based on Box-Behnken design (BBD). The RSM revealed that the sonication time of 266 s, temperature of 4.82 °C, and Tween® 80 of 3% w/w produced the optimum CEO nanoemulsion with droplet size of 65.98 nm, PDI of 0.15, and viscosity of 1.67 mPa.s. Moreover, the optimum nanoemulsion had good stability in terms of droplet size and PDI when storing at 4, 30, and 45 °C for 90 days. The antifungal activity of the optimum CEO nanoemulsion was then investigated against Aspergillus niger, Rhizopus arrhizus, Penicillium sp., and Colletotrichum gloeosporioides in comparison to CEO coarse emulsion. The results showed that the CEO nanoemulsion had better antifungal activity than coarse emulsion of CEO.     

Formulation development and optimization of a novel Cremophore EL-based nanoemulsion using ultrasound cavitation

In the present study, response surface methodology (RSM) based on central composite design (CCD) was employed to investigate the influence of main emulsion composition variables, namely drug loading, oil content, emulsifier content as well as the effect of the ultrasonic operating parameters such as pre-mixing time, ultrasonic amplitude, and irradiation time on the properties of aspirin-loaded nanoemulsions. The two main emulsion properties studied as response variables were: mean droplet size and polydispersity index. The ultimate goal of the present work was to determine the optimum level of the six independent variables in which an optimal aspirin nanoemulsion with desirable properties could be produced. The response surface analysis results clearly showed that the variability of two responses could be depicted as a linear function of the content of main emulsion compositions and ultrasonic processing variables. In the present investigation, it is evidently shown that ultrasound cavitation is a powerful yet promising approach in the controlled production of aspirin nanoemulsions with smaller average droplet size in a range of 200-300 nm and with a polydispersity index (PDI) of about 0.30. This study proved that the use of low frequency ultrasound is of considerable importance in the controlled production of pharmaceutical nanoemulsions in the drug delivery system.     

Process optimization and characterization of arachidonic acid oil degumming using ultrasound-assisted enzymatic method

Ultrasound assisted enzymatic method was applied to the degumming of arachidonic acid (ARA) oil produced by Mortierella alpina. The conditions of degumming process were optimized by response surface methodology with Box- Behnken design. A dephosphorization rate of 98.82% was achieved under optimum conditions of a 500 U/kg of Phospholipase A₁ (PLA₁) dosage, 2.8 mL/100 g of water volume, 120 min of ultrasonic time, and 135 W of ultrasonic power. The phosphorus content of ultrasonic assisted enzymatic degumming oil (UAEDO) was 4.79 mg/kg, which was significantly lower than that of enzymatic degumming oil (EDO, 17.98 mg/kg). Crude Oil (CO), EDO and UAEDO revealed the similar fatty acid compositions, and ARA was dominated (50.97 ~ 52.40%). The oxidation stability of UAEDO was equivalent to EDO and weaker than CO, while UAEDO presented the strongest thermal stability, followed by EDO and CO. Furthermore, aldehydes, acids and alcohols were identified the main volatile flavor components for the three oils. The proportions of major contributing components such as hexanal, nonanal, (E)-2-nonanal, (E, E)-2,4-decadienal, (E)-2-nonenal and aldehydes in UAEDO and EDO were all lower than CO. Overall, Ultrasound assisted enzymatic degumming proved to be an efficient and superior method for degumming of ARA oil.     

Garlic essential oil in water nanoemulsion prepared by high-power ultrasound: Properties,stability and its antibacterial mechanism against MRSA isolated from pork

Food-borne methicillin-resistance Staphylococcus aureus (MRSA) has caused significant health threats and economic loss in livestock and poultry products. Garlic essential oil (GEO) is an effective antibacterial agent but presents strong instability and hydrophobicity. In this study, GEO in water nanoemulsion (GEON) with good stability was produced by emulsification technique of high-power ultrasound. Its antibacterial activity and underlying mechanism against MRSA isolated from retailed pork were investigated. Results showed that ultrasonic treatment significantly reduced the particle size of GENO from 820.3 to 215.0 nm as time increased from 0 to 10 min. Comparatively, GEON of 10 min ultrasound was more stable than other GEONs (0, 1, 5 min) during 30 d storage. It also displayed good thermal stability and relatively good ion stability (NaCl, MgCl₂, and glucose). Antibacterial analysis showed that GEON (10 min) exhibited the best anti-MRSA activity among all GEONs, and the minimum inhibitory concentration of GEO in this nanoemulsion was 0.125 % (1.25 mg/mL). Treatment of GEON (10 min) significantly suppressed the cell proliferation of MRSA, which was mainly achieved by damaging the cell membrane as evidenced by membrane depolarization and considerable leakage of intracellular nucleic acids and protein. Laser scanning confocal microscope and scanning electron microscopy showed that treatment of GEON (10 min) significantly altered the membrane integrity and severely damaged the cellular membrane and structure. The present work illustrated that GEON produced by ultrasonic emulsification is a promising alternative to inhibit the contamination and spread of MRSA in livestock and poultry products.     

Process optimization and stability of D-limonene-in-water nanoemulsions prepared by ultrasonic emulsification using response surface methodology

d-limonene in water nanoemulsion was prepared by ultrasonic emulsification using mixed surfactants of sorbitane trioleate and polyoxyethylene (20) oleyl ether. Investigation using response surface methodology revealed that 10% d-limonene nanoemulsions formed at S₀ ratio (d-limonene concentration to mixed surfactant concentration) 0.6-0.7 and applied power 18 W for 120 s had droplet size below 100 nm. The zeta potential of the nanoemulsion was approximately −20 mV at original pH 6.4, closed to zero around pH 4.0, and around −30 mV at pH 12.0. The main destabilization mechanism of the systems is Ostwald ripening. The ripening rate at 25 °C (0.39 m³ s⁻¹ × 10²⁹) was lower than that at 4 °C (1.44 m³ s⁻¹ × 10²⁹), which was in agreement with the Lifshitz-Slezov-Wagner (LSW) theory. Despite of Ostwald ripening, the droplet size of d-limonene nanoemulsion remained stable after 8 weeks of storage.     

Synergistic antibacterial effects of ultrasound and thyme essential oils nanoemulsion against Escherichia coli O157:H7

Essential oil nanoemulsions have been proven to have stronger antimicrobial effects compared to the essential oil alone or coarse emulsion. Sonoporation could be the promising candidate to trigger a synergistic effect with thyme essential oil nanoemulsion (TEON) and produce a more effective antibacterial efficacy. Therefore, in this study, the bactericidal effects of ultrasound (US) in combination with TEON treatments against Escherichia coli (E. coli) O157:H7 were investigated. The remarkable synergistic effects of US (20 kHz, 255 W/cm², 9 min) and TEON (0.375 mg/mL) treatments at 22 °C reduced E. coli O157:H7 populations by 7.42 ± 0.27 log CFU/mL.The morphological changes of cells exposed to different treatments were observed by scanning electron microscopy and transmission electron microscopy. The results showed that the synergistic effects of the ultrasound and TEON treatments altered the morphology and interior microstructure of organism cells. Laser scanning confocal microscopy (LSCM) images revealed that the combination treatments of ultrasound and TEON altered the permeability of cell membranes, and this affected the integrity of E. coli O157:H7 cells. This was further indicated by the high amounts of nucleic acids and proteins released from these cells following treatment.The results from this study illustrated the mechanisms of the synergistic effects of sonoporation and TEON treatments and provided valuable information for their potential in food pasteurization.     

Nanoemulsification of soybean oil using ultrasonic microreactor: Process optimization,scale-up and numbering-up in series

Ultrasonically-induced nanoemulsions have been widely investigated for the development of functional food, cosmetics, and pharmaceuticals due to ideal droplet sizes (DS), low polydispersity index (PDI), and superior physical stability. However, a series of frequently-used ultrasonic set-ups mainly suffered from a low ultrasonic energy efficiency caused by the large acoustic impedance and energy consumption, subordinately confronted with a low throughput, complicated fabrication with complex structure and weak ultrasonic cavitation. Herein, we employed a typical ultrasonic microreactor (USMR) that ensured the high-efficient energy input and generated intense cavitation behavior for efficient breakage of droplets and continuous production of unified oil-in-water (O/W) nanoemulsions in a single cycle and without any pre-emulsification treatment. The emulsification was optimized by tuning the formula indexes, technological parameters, and numerical analysis using Response Surface Methodology (RSM), followed by a comparison with the emulsification by a traditional ultrasonic probe. The USMR exhibited superior emulsification efficiency and easy scale-up with remarkable uniformity by series mode. In addition, concurrent and uniform nanoemulsions with high throughput could also be achieved by a larger USMR with high ultrasonic power. Based on RSM analysis, uniform DS and PDI of 96.4 nm and 0.195 were observed under the optimal conditions, respectively, well consistent with the predicted values. Impressively, the optimal nanoemulsions have a uniform spherical morphology and exhibited superior stability, which held well in 45 days at 4℃ and 25℃. The results in the present work may provide a typical paradigm for the preparation of functional nanomaterials based on the novel and efficient emulsification tools.     

A new direction in design and manufacture of co-sensitized dye solar cells: Toward concurrent optimization of power conversion efficiency and durability

A novel methodology was implemented in the present study to concurrently control power conversion efficiency (η) and durability (D) of co-sensitized dye solar cells. Applying response surface methodology (RSM) and Desirability Function (DF), the main influential assembling (dye volume ratio and anti-aggregation agent concentration) and operational (performance temperature) parameters were systematically changed to probe their main and interactive effects on the η and D responses. Individual optimization based on RSM elucidated that D can be solely controlled by changing the ratio of vat-based organic photosensitizers, whereas η takes both effects of dye volume ratio and anti-aggregation concentration into account. Among the studied factors, the performance temperature played the most vital role in η and D regulation. In particular, however, multi-objective optimization by DF explored the degree to which one should be careful about manipulation of assembling and operational parameters in the way maximization of performance of a co-sensitized dye solar cell.     

Ultrasound-assisted preparation of lactoferrin-EGCG conjugates and their application in forming and stabilizing algae oil emulsions

The aim of this study was to prepare lactoferrin-epigallocatechin-3-gallate (LF–EGCG) conjugates and to determine their ability to protect emulsified algal oil against aggregation and oxidation. LF–EGCG conjugates were formed using an ultrasound-assisted alkaline treatment. The ultrasonic treatment significantly improved the grafting efficiency of LF and EGCG and shortened the reaction time from 24 h to 40 min. Fourier transform infrared spectroscopy and circular dichroism spectroscopy analyses showed that the covalent/non-covalent complexes could be formed between LF and EGCG, with the CO and CN groups playing an important role. The formation of the conjugates reduced the α-helix content and increased the random coil content of the LF. Moreover, the antioxidant activity of LF was significantly enhanced after conjugation with EGCG. LF–EGCG conjugates as emulsifiers were better at inhibiting oil droplet aggregation and oxidation than LF alone. This study demonstrates that ultrasound-assisted formation of protein–polyphenol conjugates can enhance the functional properties of the proteins, thereby extending their application as functional ingredients in nutritionally fortified foods.     

Artificial neural network model- and response surface methodology-based optimization of Atractylodis Macrocephalae Rhizoma polysaccharide extraction,kinetic modelling and structural characterization

Atractylodis Macrocephalae Rhizoma (AMR) is the dried rhizome of Atractylodes macrocephala Koidz, which is widely used in the development of health products. AMR contains a large number of polysaccharides, but at present there are fewer applications for these polysaccharides. In this study, the effects of different extraction methods on the Atractylodis Macrocephalae Rhizoma polysaccharide (AMRP) yield were investigated, and the conditions for ultrasound-assisted extraction were optimized by response surface methodology (RSM) and three neural network models (BP neural network, GA-BP neural network and ACO-GA-BP neural network). The best conditions were a liquid-to-solid ratio of 17 mL/g, ultrasonic power of 400 W, extraction temperature of 72 °C, and extraction time of 40 min, which yielded 31.31% AMRP. The kinetic equation of AMRP was determined and compared with the results predicted by three neural network models. It was finally determined that the extraction conditions, kinetic processes and kinetic equation predicted by the GA-ACO-BP neural network were optimal. In addition, AMRP was characterized using SEM, FTIR, HPLC, UV, XRD, and NMR, and the structural study revealed that AMRP has a rough exterior and a porous interior; moreover, it contains high levels of glucose (5.07%), arabinose (0.80%), and galactose (0.74%). AMRP has three crystal structures, consisting of two β-type monosaccharides and one α-type monosaccharide. Additionally, the effectiveness of AMRP as an antioxidant was demonstrated in an in vitro experiment.     

Application of ZnO nanorods loaded on activated carbon for ultrasonic assisted dyes removal: Experimental design and derivative spectrophotometry method

A method based on application of ZnO nanorods loaded on activated carbon (ZnO-NRs-AC) for adsorption of Bromocresol Green (BCG) and Eosin Y (EY) accelerated by ultrasound was described. The present material was synthesized under ultrasound assisted wet-chemical method and subsequently was characterized by FE-SEM, TEM, BET and XRD analysis. The extent of contribution of conventional variables like pH (2.0–10.0), BCG concentration (4–20 mg L⁻¹), EY concentration (3–23 mg L⁻¹), adsorbent dosage (0.01–0.03 g), sonication time (1–5 min) and centrifuge time (2–6 min) as main and interaction part were investigated by central composite design under response surface methodology. Analysis of variance (ANOVA) was adapted to experimental data and guide the best operational conditions mass by set at 6.0, 9 mg L⁻¹, 10 mg L⁻¹, 0.02 g, 4 and 4 min for pH, BCG concentration, EY concentration, adsorbent dosage, sonication and centrifuge time, respectively. At these specified conditions dye adsorption efficiency was higher than 99.5%. The suitability and well prediction of optimum point was tested by conducting five experiments and respective results revel that RSD% was lower than 3% and high quality of fitting was confirmed by t-test. The experimental data were best fitted in Langmuir isotherm equation and the removal followed pseudo second order kinetics. The experimentally obtained maximum adsorption capacities were estimated as 57.80 and 61.73 mg g⁻¹ of ZnO-NRs-AC for BCG and EY respectively from binary dye solutions. The mechanism of removal was explained by boundary layer diffusion via intraparticle diffusion.     

Ultrasonic-assisted enzymatic improvement of polyphenol content,antioxidant potential,and in vitro inhibitory effect on digestive enzymes of Miang extracts

The aims of this research were to optimize the ultrasonic-assisted enzymatic extraction of polyphenols under Miang and tannase treatment conditions for the improvement of antioxidant activity of Miang extracts via response surface methodology. Miang extracts treated with and without tannase were investigated for their inhibitory effects on digestive enzymes. The optimal conditions for ultrasonic-assisted enzymatic extraction of the highest total polyphenol (TP) (136.91 mg GAE/g dw) and total flavonoid (TF) (5.38 mg QE/g dw) contents were as follows: 1 U/g cellulase, 1 U/g xylanase, 1 U/g pectinase, temperature (74 °C), and time (45 min). The antioxidant activity of this extract was enhanced by the addition of tannase obtained from Sporidiobolus ruineniae A45.2 undergoing ultrasonic treatment and under optimal conditions (360 mU/g dw, 51 °C for 25 min). The ultrasonic-assisted enzymatic extraction selectively promoted the extraction of gallated catechins from Miang. Tannase treatment improved the ABTS and DPPH radical scavenging activities of untreated Miang extracts by 1.3 times. The treated Miang extracts possessed higher IC₅₀ values for porcine pancreatic α-amylase inhibitory activity than those that were untreated. However, it expressed approximately 3 times lower IC₅₀ values for porcine pancreatic lipase (PPL) inhibitory activity indicating a marked improvement in inhibitory activity. The molecular docking results support the contention that epigallocatechin, epicatechin, and catechin obtained via the biotransformation of the Miang extracts played a crucial role in the inhibitory activity of PPL. Overall, the tannase treated Miang extract could serve as a functional food and beneficial ingredient in medicinal products developed for obesity prevention.     

Optimization of ultrasound extraction of functional compound from makiang seed by response surface methodology and antimicrobial activity of optimized extract with its application in orange juice

An ultrasound-assisted extraction (UAE) was optimized for the extraction of bioactive compound (total phenolic compound and total flavonoid content) with antioxidant activity (DPPH and FRAP assays) using response surface methodology based on Box-Behnken design (BBD). The effect of extraction temperature (X₁: 30–70 °C), extraction time (X₂: 25–45 min) and amplitude (X₃: 30–50%) were determined. In addition, antimicrobial activity and application of optimized makiang seed extract (MSE) were also evaluated. Results showed that the optimum condition of UAE were X₁: 51.82 °C, X₂: 31.87 min and X₃: 40.51%. It was also found that gallic acid was the major phenolic compound of optimized MSE and its minimum inhibitiory concentration (MIC) and minimum bactericidal concentration (MBC) was between 1.56 - 6.25 and 25–100 mg/mL respectively. The addition of MSE could enhance the stability of orange juice and shelf life extension was also obtained. This research finding suggests the beneficial opportunities for ultrasound-assisted extraction for the production of bioactive compound from makiang seed with antioxidant activity leading to an application in medicinal and functional food industry.     

Synthesis of nanocomposites of iron oxide/gold (Fe3O4/Au) loaded on activated carbon and their application in water treatment by using sonochemistry: Optimization study

This paper focuses on the finding best operational conditions using response surface methodology (RSM) for Rhodamine123 (R123) and Disulfine blue (DSB) dyes removal by ultrasound assisted adsorption onto Au-Fe₃O₄ nanoparticles loaded on activated carbon (Au-Fe₃O₄ NPs-AC). The influences of variables such as initial R123 (X₁) and DSB concentration (X₂), pH (X₃), adsorbent mass (X₄) and sonication time (X₅) on their removal were investigated by small central composite design (CCD) under response surface methodology. The significant variables and the possible interactions among variables were investigated and estimated accordingly. The best conditions were set as: 4 min, 4.0, 0.025 g, 13.5 and 26.5 mg L⁻¹ for sonication time, pH, adsorbent weight, initial R123 and DSB concentration, respectively. At above conditions, the adsorption equilibrium and kinetic follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. The maximum monolayer capacity (Q_max) of 71.46 and 76.38 mg g⁻¹ for R123 and DSB show sufficiency of model for well presentation of experimental data.     

Improved adsorption performance of nanostructured composite by ultrasonic wave: Optimization through response surface methodology,isotherm and kinetic studies

In this work, ultrasound-assisted adsorption of an anionic dye, sunset yellow (SY) and cationic dyes, malachite green (MG), methylene blue (MB) and their ternary dye solutions onto Cu@ Mn-ZnS-NPs-AC from water aqueous was optimized by response surface methodology (RSM) using the central composite design (CCD). The adsorbent was characterized using Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX) and EDX mapping images. The effects of various parameters such as pH, sonication time, adsorbent mass and initial concentrations of SY, MG and MB were examined. A total 33 experiments were conducted to establish a quadratic model. Cu@ Mn-ZnS-NPs-AC has the maximum adsorption efficiency (>99.5%) when the pH, sonication time, adsorbent mass and initial concentrations of SY, MG and MB were optimally set as 6.0, 5 min, 0.02 g, 9, 12 and 12 mg L⁻¹, respectively. Sonication time has a statistically significant effect on the selected responses. Langmuir isotherm model was found to be best fitted to adsorption and adsorption capacities were 67.5 mg g⁻¹ for SY, 74.6 mg g⁻¹ for MG and 72.9 mg g⁻¹ for MB. Four kinetic models (pseudo-first order, pseudo-second order, Weber–Morris intraparticle diffusion rate and Elovich) were tested to correlate the experimental data and the sorption was fitted well with the pseudo-second order kinetic model.     

Ag3PO4/rectorite nanocomposites: Ultrasound-assisted preparation,characterization and enhancement of stability and visible-light photocatalytic activity

To overcome the drawback of low stable brought by the transformation of Ag⁺ into Ag, a highly efficient and stable photocatalyst Ag₃PO₄/rectorite composite was successfully synthesized by ultrasound-assisted precipitation method. The as-prepared samples were characterized by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, N₂ adsorption-desorption, room-temperature photoluminescence spectra, Fourier transform infrared spectrum measurements and UV–vis diffuse reflectance spectra. The absorption edges of the Ag₃PO₄/rectorite display a noticeable shift to the visible light region as compared to that of the Ag₃PO₄. Compared with bare Ag₃PO₄, the Ag₃PO₄/rectorite composite by ultrasound-assisted precipitation process exhibits significantly enhanced photocatalytic activity and stable for methyl orange (MO) degradation under visible light irradiation. The improved activity of the Ag₃PO₄/rectorite photocatalyst could be attributed to the expanded visible light absorption, the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Therefore, the facile ultrasound-assisted preparation process provides some insight into the application of Ag₃PO₄/rectorite nanocomposites in photocatalytic degradation of organic pollutants.     

Fabrication and characterization of quercetin loaded casein phosphopeptides-chitosan composite nanoparticles by ultrasound treatment: Factor optimization,formation mechanism,physicochemical stability and antioxidant activity

Ultrasound treatment was used to successfully prepare Quercetin (Qu)-loaded Casein phosphopeptides (CPP)/chitosan (CS) nanoparticles. Compared with the control, the above ternary nanoparticles with the smallest size (241.27 nm, decreased by 34.32%), improved encapsulation efficiency of Qu (78.55%, increased by 22.12%) when prepared under following conditions: ultrasonic frequency, 20/35/50 kHz; the power density, 80 W/L; the time, 20 min, and the intermittent ratio, 20 s/5s. Electrostatic interactions, hydrogen bonding, and hydrophobic interactions were the main driving forces for nanoparticles formulation, which were strengthened by ultrasound treatment. The compact, homogeneous and spherical composite nanoparticles obtained by sonication were clearly observed by scanning electron microscope and atomic force microscope. The environmental stability (NaCl, pH, exposure time, storage time, and simulated gastrointestinal digestion) and antioxidant activity of the ternary nanoparticles were remarkably enhanced after ultrasonic treatment. Furthermore, the ternary nanoparticles prepared by ultrasound exhibited excellent stability in simulated gastrointestinal digestion. The above results indicate that ultrasound not only increases the loading of the nanoparticles on bioactive substances but also improves the environmental stability and antioxidant activity of the formed nanoparticles. Ultrasound-assisted preparation of nanoparticles loaded with bioactive substances could be well used in the functional food and beverage industry.     

Comparison of the effect of extraction methods on the quality of green coffee oil from Arabica coffee beans: Lipid yield,fatty acid composition,bioactive components,and antioxidant activity

In this study, ultrasonic/microwave-assisted extraction (UMAE), microwave-assisted extraction (UAE), ultrasound-assisted extraction (UAE), and pressurized liquid extraction (PLE) were applied to extract green coffee oil (GCO), and the physicochemical indexes, fatty acids, tocopherols, diterpenes, and total phenols as well as antioxidant activity of GCO were investigated and compared. The results indicated that the extraction yield of UMAE was the highest (10.58 ± 0.32%), while that of PLE was the lowest (6.34 ± 0.65%), and linoleic acid and palmitic acid were the major fatty acids in the GCO, ranging from 40.67% to 43.77% and 36.57% to 38.71%, respectively. A large proportion of fatty acids and phytosterols were not significantly influenced by the four extraction techniques. However, tocopherols, diterpenes, total phenols, and the free radical scavenging activity were significantly different among these four GCOs. Moreover, structural changes in the coffee residues were explored by scanning electron microscopy and Fourier transform infrared spectroscopy. Overall, the high antioxidant activity of GCO demonstrated that it can be used as a highly economical natural product in the food and agricultural industries.     

Fermentation of Saccharomyces cerevisiae in a 7.5 L ultrasound-enhanced fermenter: Effect of sonication conditions on ethanol production,intracellular Ca2+ concentration and key regulating enzyme activity in glycolysis

In this study, the effect of sonication on the fermentation process of a single-celled fungus was examined. During the experiment, Saccharomyces cerevisiae (S. cerevisiae) was used as the starting strain for ethanol fermentation (batch fermentation) in a 7.5 L automated fermentation tank. The fermentation tank connected with a six-frequency ultrasonic equipment. Non-sonication treatment was set up as the control. Sonication treatment with power density of 280 W/L and 48 h of treatment time were set up as trial groups for investigating the influence of different ultrasound frequency including 20, 23, 25, 28, 33 and 40 kHz on the changes in dry cell-weight, glucose consumption rate, and ethanol yield. The results showed that the dry cell-weight, glucose consumption rate, and ethanol content reached the best results under the ultrasonic condition of 28 kHz ultrasound frequency in comparison with other ultrasound frequency. The dry cell-weight and ethanol content of the 28 kHz ultrasonic treatment group increased by 17.30% and 30.79%, respectively in comparison with the control group The residual sugar content dropped to a lower level within 24 h, which was consistent with the change in ethanol production. Besides, the results found that the glucose consumption rate increased compared to the control. It indicated that ultrasound accelerated glucose consumption contributed to increase the rate of ethanol output. In order to explore the mechanism of sonication enhanced the content of ethanol output by S. cerevisiae, the morphology, permeability of S. cerevisiae and key enzyme activities of ethanol synthesis were investigated before and after sonication treatment. The results showed that after sonication treatment, the extracellular nucleic acid protein content and intracellular Ca²⁺ concentration increased significantly. The morphology of S. cerevisiae was observed by SEM and found that the surface of the strain had wrinkles and depressions after ultrasonic treatment. furthermore after sonication treatment, the activities of three key enzymes which catalyze three irreversible reactions in glycolysis metabolism, namely, hexokinase, phosphofructokinase and pyruvate kinase increased by 59.02%, 109.05% and 87.27%, respectively. In a word, low-intensity ultrasound enhance the rate of ethanol output by S. cerevisiae might due to enhancing the growth and cell permeability of strains, and increasing the activities of three key enzymes of ethanol biosynthesis.