Photoinduced degradation of organic solar cells with different microstructures

An in situ measurement setup is established to investigate the photoinduced degradation effects in a controllable inert gas ambient environment for the two different microstructures of poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl-C61-butyricacid methyl ester(PCBM) bulk-heterojunction organic solar cells. The two devices are fabricated with the solvent vapor drying process followed by a thermal annealing(vapor drying device) and only a normal thermal annealing process(control device), respectively. Their power conversion efficiencies(PCEs) and aging features are compared. Their different degradation behaviors in light absorption are confirmed. In addition, irradiation-induced changes in both nanostructure and surface morphology of the P3HT:PCBM blend films treated with two different fabrication processes are observed through scanning electron microscopy and atomic force microscopy. Aggregated bulbs are observed at the surfaces for control devices after light irradiation for 50 h, while the vapor drying devices exhibit smooth film surfaces, and the corresponding device features are not easy to degrade under the aging measurement. Thus the devices having solvent vapor drying and thermal annealing show better device stabilities than those having only the thermal annealing process.     

Preparation and efficient visible light-induced photocatalytic activity of m-BiVO4 with different morphologies

The monoclinic scheelite BiVO₄ crystals with peanut-like, oval, twin-quadrangle and twin-four-pointed star morphologies were synthesized via a facile one step hydrothermal method by using sodium citrate as the chelating agent. The X-ray diffraction and scanning electron microscopy were employed to elucidate the structures and mophologies of the as-prepared BiVO₄ samples. The results showed that the formation of m-BiVO₄ with different morphologies relied on the pH value of the precursor solution. The band gaps values (E_g) of all the BiVO₄ samples were around 2.37–2.45 eV according to the UV–vis diffuse reflectance spectrum, which indicated that samples could strongly absorb in the visible light region. The photocatalytic activities of BiVO₄ crystals were evaluated by degradation of MB in aqueous solution under artificial solar-light. The BiVO₄ samples obtained at different pH values showed different photocatalytic activities during the sunlight-driven photodegradation of methylene blue (MB). The sample with peanut-like-shape prepared at pH=1 exhibited the highest activity, and the photocatalytic conversion could reach above 90% after 3 h of irradiation. The result suggested that m-BiVO₄ with peanut-like-shape could be used as an effective photocatalyst in practical application for organic pollutants degradation.     

Catalytic activation of hydrogen peroxide by Cr2AlC MAX phase under ultrasound waves for a treatment of water contaminated with organic pollutants

This study aims to investigate the sonocatalytic activation of hydrogen peroxide (H₂O₂) using Cr₂AlC MAX phase prepared by the reactive sintering process. The hexagonal structure of the crystalline MAX phase was confirmed by X-ray diffraction. Moreover, the compacted layered structure of the MAX phase was observed via scanning electron microscopy and high-resolution transmission electron microscopy. Under the desired operating conditions, Cr₂AlC MAX phase (0.75 g/L) showed suitable potential to activate H₂O₂ (1 mmol/L) under sonication, thereby allowing a considerable removal efficiency for various organic pollutants, including dimethyl phthalate (69.1%), rifampin (94.5%), hydroxychloroquine (100%), and acid blue 7 (91.5%) with initial concentration of 15 mg/L within 120 min of treatment. Kinetic analysis proved that the degradation reaction followed pseudo-first-order kinetics. Scavenging tests demonstrated that hydroxyl radicals and singlet oxygen were effective species during degradation. Furthermore, a probable mechanism for dimethyl phthalate degradation was suggested according to gas chromatography-mass spectroscopy and nuclear magnetic resonance analyses. The obtained results confirmed the capability of the triple Cr₂AlC/H₂O₂/US process as a promising method for treating contaminated water.     

有机染料HEASPS在不同波长时的激发态吸收和双光子吸收性质研究

提出了有机染料反式 4 [4′ (N 羟乙基 N 乙基胺基 )苯乙烯基 ] N 甲基吡啶对甲苯磺酸盐 (简称HEASPS)非线性吸收的三态模型。认为在较短波长 (<1 0 0 0nm)时 ,双光子吸收和激发态吸收同时存在。成功地解释了该染料双光子吸收峰相对线性吸收峰的两倍的明显蓝移 ,以及最高上转换效率波长相对最强吸收波长的明显红移。提出了一种新的计算方法 ,利用不同波长的非线性透过率和不同波长的上转换效率 ,求出了该染料的双光子吸收截面和激发态吸收系数。     

Calcium permeation property and firmness change of cherry tomatoes under ultrasound combined with calcium lactate treatment

This study aimed to investigate the effect of ultrasound combined with calcium lactate (2%, w/v) treatment (U + Ca) on calcium permeation and firmness of cherry tomatoes. Calcium distribution and fruit pectin nanostructure were also analysed by transmission electron microscope (TEM) and atomic force microscopy (AFM), respectively. The firmness (31.45 N) was maintained when ultrasound energy density was 20 W/L for 15 min at 15 °C. The Ca content increased in U + Ca treated fruit. Meanwhile, the Peleg’s model could be used to express the change of solid gain in cherry tomatoes under ultrasound treatment at 15, 20, and 25 °C. According to the AFM results, the width (≥40 nm) and length (≥2 μm) of chelate-soluble pectin (CSP) and sodium carbonate-soluble pectin (SSP) chains with large frequency was observed in U + Ca treated fruit. Under desirable conditions (15 °C, 15 min, 20 W/L), ultrasound combined with calcium lactate could maintain the quality of cherry tomatoes.     

Improvement of structural,physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and β-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.     

Bifunctional photocatalysis of TiO2/Cu2O composite under visible light: Ti in organic pollutant degradation and water splitting

Photocatalytic experiment results under visible light demonstrate that both TiO₂ and Cu₂O have low activity for brilliant red X-3B degradation and neither can produce H₂ from water splitting. In comparison, TiO₂/Cu₂O composite can do the both efficiently. Further investigation shows that the formation of Ti³⁺ under visible light has great contribution. The mechanism of photocatalytic reaction is proposed based on energy band theory and experimental results. The photogenerated electrons from Cu₂O were captured by Ti⁴⁺ ions in TiO₂ and Ti⁴⁺ ions were further reduced to Ti³⁺ ions. Thus, the photogenerated electrons were stored in Ti³⁺ ions as the form of energy. These electrons trapped in Ti³⁺ can be released if a suitable electron acceptor is present. So, the electrons can be transferred to the interface between the composite and solution to participate in photocatalytic reaction. XPS spectra of TiO₂/Cu₂O composite before and after visible light irradiation were carried out and provided evidence for the presence of Ti³⁺. The image of high-resolution transmission electron microscopy demonstrates that TiO₂ combines with Cu₂O tightly. So, the photogenerated electrons can be transferred from Cu₂O to TiO₂.     

Effect of ultrasound combined with ultraviolet treatment on microbial inactivation and quality properties of mango juice

This work explored the effect of ultraviolet-assisted ultrasound (US-UV) as an emerging non-thermal sterilization technology on mango juice in aspects of microbial growth and quality changes. The juice in the ice bath was subjected to US-UV treatment at different US powers (0–600 W) and times (0–40 min), and no pathogen bacteria could be detected after treatment, while the physicochemical features (particle size, suspension stability, color, content of total polyphenols, carotenoids, sugar, reducing sugar and protein) and antioxidant ability of treated juice was preserved or improved to some extent. Based on these results, we further validated its positive effects on the nutritional value (content of ascorbic acid and soluble dietary fiber, antioxidant ability) and quality parameters (titratable acid, sugar acidity, total soluble solids, rheological behavior, metal elements) of mango juice treated at the optimal US parameter (10 min, 600 W); Not only the inactivation of polyphenol oxidation enzyme, peroxidase and pectin methylesterase was achieved but also the treated juice has a significant different volatile profile compared with the fresh juice, which might offer the better color, texture, and smell. Importantly, through the HPLC-MSD-Trap-XCT (phenols) and UPLC-Q Exactive Orbitrap-MS (carotenoids) study, the US-UV treatment will not cause difference on compounds composition, but it was responsible for changes in content of individual compounds, especially the all-trans-β-carotene, became the main component of carotenoids in processed mango juice (increased from 43.72% to 75.15%, relative content), and the oxygenated carotenoids (xanthophylls) are highly sensitive to the US (reduced from 50.96% to 4.85%) while the carotenes show a strong resistance to the US (increased 49.04% to 95.15%). Thus, the overall safety and quality of mango juice were enhanced while the sensory characteristics remained stable, suggesting that this non-thermal combination sterilization processing may successfully be implemented in the commercial processing of mango juice.     

Preparation and characterization of TiO2 photocatalysts co-doped with iron (III) and lanthanum for the degradation of organic pollutants

Titanium dioxide photocatalysts co-doped with iron (III) and lanthanum were prepared by a facile sol-gel method. The structure of catalysts was characterized by X-ray diffraction (XRD), Raman spectroscopy, UV-vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were evaluated by the degradation of methylene blue in aqueous solutions under visible light (λ > 420 nm) and UV light irradiation. Doping with Fe³⁺ results in a lower anatase to rutile (A-R) phase transformation temperature for TiO₂ particles, while doping with La³⁺ inhibits the A-R phase transformation, and co-doping samples indicate that Fe³⁺ partly counteracts the effect of La³⁺ on the A-R transformation property of TiO₂. Fe-TiO₂ has a long tail extending up the absorption edges to 600 nm, whereas La-TiO₂ results in a red shift of the absorption. However, Fe and La have synergistic effect in the absorption of TiO₂. Compared with Fe³⁺ and La³⁺ singly doped TiO₂, the co-doped simple exhibits excellent visible light and UV light activity and the synergistic effect of Fe³⁺ and La³⁺ is responsible for improving the photocatalytic activity.     

Lattice Boltzmann simulation of a binary fluid with different phase viscosities and its application to fingering in two dimensions

A thermodynamically consistent lattice Boltzmann scheme for simulating the flow of a binary fluid is extended to allow the fluid components to have different viscosities. The approach is tested for the shear and Poiseuille flow of layered immiscible fluids and for the dispersion relation and the damping of a capillary wave. We then consider the fingering that results when a fluid is displaced by a less viscous fluid in a two-dimensional channel. The finger widths obtained match the results of Reinelt and Saffman [#!Reinelt85!#], but differ somewhat from those of Halpern and Gaver [#!Halpern94!#] for capillary numbers above 2. A limiting finger width close to 1/2 is obtained for high capillary numbers and high viscosity ratios. Received 25 May 1999 and Received in final form 19 November 1999     

高压下不同结构的Zr3N4合金结构和弹性性质的第一性原理计算

用基于平面波赝势密度泛函理论的第一性原理方法研究了高压下空间群为I4-3D,Pna21和Pnam的三种结构的Zr3N4的弹性性质,获得了这三种物质在高压下的体弹模量B,剪切模量G,杨氏模量E,泊松比,B/G等力学性质。结果表明,在高压下这三种结构的Zr3N4都是保持力学稳定的,且这三种结构的Zr3N4在各个方向的可压缩性是各向异性的。三种结构的Zr3N4对应的体弹模量,剪切模量和杨氏模量都是随着压强的增大而增大。其中空间群为I4-3D的Zr3N4有最好的抵抗体积压缩,变形和线性压缩的能力。泊松比和B/G的数据表明三种结构在此压强范围内均有较好的延展性,高压下空间群为Pna21和Pnam的Zr3N4延展性更好。研究结论对理论研究和实验有一定参考价值。     

The effect of annealing treatment on the performance of bulk heterojunction solar cells with donor and acceptor different weight ratios

Bulk heterojunction organic solar cells(OSCs) based on the blend of poly(2-methoxy-5(2'-ethyl-hexyloxy)-1,4-phenylenevinylene(MEH-PPV) and [6,6]-phenyl C61 butyric acid methyl ester(PCBM) with different weight ratios(from 1:3 to 1:5) have been fabricated and the effect of annealing treatment on the performance of OSCs has also been studied.Experimental results point to the best optimized doping concentration 1:4 for MEH-PPV:PCBM.Furthermore,it is found that the devices with annealing treatment at 150℃ with ...