Ultrasonic emulsification of food-grade nanoemulsion formulation and evaluation of its bactericidal activity

Basil oil (Ocimum basilicum) nanoemulsion was formulated using non-ionic surfactant Tween80 and water by ultrasonic emulsification method. Process of nanoemulsion development was optimized for parameters such as surfactant concentration and emulsification time to achieve minimum droplet diameter with high physical stability. Surfactant concentration was found to have a negative correlation with droplet diameter, whereas emulsification time had a positive correlation with droplet diameter and also with intrinsic stability of the emulsion. Stable basil oil nanoemulsion with droplet diameter 29.3 nm was formulated by ultrasonic emulsification for 15 min. Formulated nanoemulsion was evaluated for antibacterial activity against Escherichia coli by kinetics of killing experiment. Fluorescence microscopy and FT-IR results showed that nanoemulsion treatment resulted alteration in permeability and surface features of bacterial cell membrane.     

Ultrasonic emulsification of parenteral valproic acid-loaded nanoemulsion with response surface methodology and evaluation of its stability

Response surface methodology (RSM) was used to optimize the formulation of a nanoemulsion for central delivery following parenteral administration. A mixture of medium-chain triglyceride (MCT) and safflower seed oil (SSO) was determined as a sole phase from the emulsification properties. Similarly, a natural surfactant (lecithin) and non-ionic surfactant (Tween 80) (ratio 1:2) were used in the formulation. A central composite design (CCD) with three-factor at five-levels was used to optimize the processing method of high energy ultrasonicator. Effects of pre-sonication ultrasonic intensity (A), sonication time (B), and temperature (C) were studied on the preparation of nanoemulsion loaded with valproic acid. Influence of the aforementioned specifically the effects of the ultrasonic processing parameters on droplet size and polydispersity index were investigated. From the analysis, it was found that the interaction between ultrasonic intensity and sonication time was the most influential factor on the droplet size of nanoemulsion formulated. Ultrasonic intensity (A) significantly affects the polydispersity index value. With this optimization method, a favorable droplet size of a nanoemulsion with reasonable polydispersity index was able to be formulated within a short sonication time. A valproic acid loaded nanoemulsion can be obtained with 60% power intensity for 15 min at 60 °C. Droplet size of 43.21 ± 0.11 nm with polydispersity index of 0.211 were produced. The drug content was then increased to 1.5%. Stability study of nanoemulsion containing 1.5% of valproic acid had a good stability as there are no significant changes in physicochemical aspects such as droplet size and polydispersity index. With the characteristisation study of pH, viscosity, transmission electron microscope (TEM) and stability assessment study the formulated nanoemulsion has the potential to penetrate blood–brain barrier in the treatment of epilepsy.     

Synergistic bactericidal effect of ultrasound combined with citral nanoemulsion on Salmonella and its application in the preservation of purple kale

In this study, a novel citral nanoemulsion (CLNE) was prepared by ultrasonic emulsification. The synergistic antibacterial mechanism of ultrasound combined with CLNE against Salmonella Typhimurium and the effect on the physicochemical properties of purple kale were investigated. The results showed that the combined treatment showed obviously inactivate effect of S. Typhimurium. Treatment with 0.3 mg/mL CLNE combined with US (20 kHz, 253 W/cm²) for 8 min reduced S. Typhimurium populations in phosphate-buffered saline (PBS) by 9.05 log CFU/mL. Confocal laser scanning microscopy (CLSM), flow cytometry (FCM), protein and nucleic acid release assays showed that the US combination CLNE disrupt the integrity of S. Typhimurium membranes. Reactive oxygen species (ROS) and malondialdehyde (MDA) detection indicated that US+CLNE exacerbated oxidative stress and lipid peroxidation in cell membranes. The morphological changes of cells after different treatments by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) illustrated that the synergistic effect of US+CLNE treatment changed the morphology and internal microstructure of the bacteriophage cells. Application of US+CLNE on purple kale leaves for 6 min significantly (P < 0.05) reduced the number of S. Typhimurium, but no changes in the physicochemical properties of the leaves were detected. This study elucidates the synergistic antibacterial mechanism of ultrasound combined with CLNE and provides a theoretical basis for its application in food sterilization.     

Antibacterial mechanism of ultrasound against Escherichia coli: Alterations in membrane microstructures and properties

This study was aimed at providing new insights on the response of bacterial cell membranes to ultrasound exposure. Escherichia coli (E. coli) O157:H7 cells were exposed to different ultrasound treatments (power intensities of 64, 191, 372, and 573 W/cm², frequency of 20 kHz, pulsed mode of 2 sec: 2 sec) and the dynamic changes in cell viability within 27 min were assessed. With an increase in ultrasonic intensity and prolonged duration, a 0.76–3.52 log CFU/mL reduction in E. coli populations was attained. The alterations in the sensitivity of ultrasound-treated cells to antimicrobial compounds were evaluated by exposure to thyme essential oil nanoemulsion (TEON). The treatment reduced the E. coli population by 2.16–7.10 log CFU/mL, indicating the effects of ultrasonic field on facilitating the antibacterial efficacy of TEON. Ultrasonic-treated E. coli cells also displayed remarkable morphological and ultrastructural damages with destroyed membrane integrity and misshaped cell structures, which was observed by electron microscopy analysis. Significant increase in outer and inner membrane permeability, along with the cytoplasmic leakage and membrane depolarization were assessed utilizing spectrophotometry. For the first time, significant reduction in the membrane fluidity in response to ultrasound exposure were investigated. Additional efforts in exploring the effect of ultrasonic field on some bacterial membrane compositions were performed with infrared spectroscopy. In this study, multiple lines of evidence effectively served to elucidate the alterations on cellular membrane structure and property during exposure to sonication that could extend our understanding of the antimicrobial molecular mechanisms of ultrasound.     

Sustained release formulations of citronella oil nanoemulsion using cavitational techniques

Nanoemulsion synthesis has proven to be an effective way for transportation of immobile, insoluble bioactive compounds. Citronella Oil (lemongrass oil), a natural plant extract, can be used as a mosquito repellent and has less harmful effects compared to its available market counterpart DEET (N, N-Diethyl-meta-toluamide). Nanoemulsion of citronella oil in water was prepared using cavitation-assisted techniques while investigating the effect of system parameters like HLB (Hydrophilic Lipophilic Balance), surfactant concentration, input energy density and mode of power input on emulsion quality. The present work also examines the effect of emulsification on release rate to understand the relationship between droplet size and the release rate. Minimum droplet size (60 nm) of the emulsion was obtained at HLB of 14, S/O¹ ratio of 1.0, ultrasound amplitude of 50% and irradiation time of 5 min. This study revealed that hydrodynamic cavitation-assisted emulsification is more energy efficient compared to ultrasonic emulsification. It was also found that the release rate of nanoemulsion enhanced as the droplet size of emulsion reduced.     

Ultrasonic emulsification of eucalyptus oil nanoemulsion: Antibacterial activity against Staphylococcus aureus and wound healing activity in Wistar rats

The plant derived essential oil nanoemulsion was prepared using a mixture of components containing eucalyptus oil as organic phase, water as continuous phase, and non ionic surfactant, Tween 80, as emulsifier at a particular proportion of 1:1 v/v%. The ultrasonication was applied for varied processing time from 0 to 30 min to study the effect of time on the formation of nanoemulsion and physical stability of formulation by this method. The transparency and stability of emulsion was enhanced when the sonication time was increased compared to hand blender emulsion. The most stable nanoemulsion was obtained in 30 min sonication having the mean droplet diameter of 3.8 nm. The antibacterial studies of nanoemulsion against Staphylococcus aureus by time kill analysis showed complete loss of viability within 15 min of interaction. Observations from scanning electron microscopy of treated bacterial cells confirmed the membrane damage compared to control bacteria. Furthermore, the wound healing potential and skin irritation activity of the formulated nanoemulsion in Wistar rats, suggested non-irritant and higher wound contraction rate with respect to control and neomycin treated rats. These results proposed that the formulated system could be favourable for topical application in pharmaceutical industries.     

Ultrasonic irradiation enhanced the efficacy of antimicrobial photodynamic therapy against methicillin-resistant Staphylococcus aureus biofilm

Antimicrobial photodynamic therapy (aPDT) is a non-pharmacological antimicrobial regimen based on light, photosensitizer and oxygen. It has become a potential method to inactivate multidrug-resistant bacteria. However, limited by the delivery of photosensitizer (PS) in biofilm, eradicating biofilm-associated infections by aPDT remains challenging. This study aimed to explore the feasibility of combining ultrasonic irradiation with aPDT to enhance the efficacy of aPDT against methicillin-resistant staphylococcus aureus (MRSA) biofilm. A cationic benzylidene cyclopentanone photosensitizer with much higher selectivity to bacterial cells than mammalian cells were applied at the concentration of 10 μM. 532 nm laser (40 mW/cm², 10 min) and 1 MHz ultrasound (500 mW/cm², 10 min, simultaneously with aPDT) were employed against MRSA biofilms in vitro. In addition to combined with ultrasonic irradiation and aPDT, MRSA biofilms were treated with laser irradiation only, photosensitizer only, ultrasonic irradiation only, ultrasonic irradiation and photosensitizer, and aPDT respectively. The antibacterial efficacy was determined by XTT assay, and the penetration depth of PS in biofilm was observed using a photoluminescence spectrometer and a confocal laser scanning microscopy (CLSM). In addition, the viability of human dermal fibroblasts (WS-1 cells) after the same treatments mentioned above and the uptake of P3 by WS-1 cells after ultrasonic irradiation were detected by CCK-8 and CLSM in vitro. Results showed that the percent decrease in metabolic activity resulting from the US + aPDT group (75.76%) was higher than the sum of the aPDT group (44.14%) and the US group (9.88%), suggesting synergistic effects. Meanwhile, the diffusion of PS in the biofilm of MRSA was significantly increased by 1 MHz ultrasonic irradiation. Ultrasonic irradiation neither induced the PS uptake by WS-1 cells nor reduced the viability of WS-1 cells. These results suggested that 1 MHz ultrasonic irradiation significantly enhanced the efficacy of aPDT against MRSA biofilm by increasing the penetration depth of PS. In addition, the antibacterial efficacy of aPDT can be enhanced by ultrasonic irradiation, the US + aPDT treatment demonstrated encouraging in vivo antibacterial efficacy (1.73 log₁₀ CFU/mL reduction). In conclusion, the combination of aPDT and 1 MHz ultrasound is a potential and promising strategy to eradicate biofilm-associated infections of MRSA.     

Effect of slit dual-frequency ultrasonic emulsification technology on the stability of walnut emulsions

A highly hygienic walnut emulsion beverage was prepared by using a slit dual-frequency emulsification technique. The optimal ultrasonic parameters were studied as a model system: the ultrasonic time of 50 min, the ultrasonic power density of 260 W/L, and a dual-frequency ultrasonic combination of 28/68 kHz. Walnut emulsion with an average mean volume diameter of 2.05 µm, a Zeta potential absolute value of 40 mV was obtained after ultrasonic treatment, and the emulsion stability could be maintained for more than 14 days without phase separation. At the lowest ultrasonic energy input, the vibrating emulsion could promote droplet aggregation. However, excessive energy input could result in sample overtreatment and reduced emulsion activity. The laser scanning confocal microscope (LSCM) and transmission electron microscope (TEM) confirmed that walnut emulsion processed by slit dual-frequency ultrasonic had pretty high stability. Therefore, the slit dual-frequency ultrasonic emulsification technique was found to be well suited for the preparation of complex and fine oil-in-water food emulsions.     

Fabrication of emulsions prepared by rice bran protein hydrolysate and ferulic acid covalent conjugate: Focus on ultrasonic emulsification

The aim of the paper was to investigate the effect of ultrasonic emulsification treatment on the fabrication mechanism and stability of the emulsion. The covalent conjugate made with rice bran protein hydrolysate (RBPH) and ferulic acid (FA) was used as the emulsifier. The effects of high intensity ultrasound (HIU) power with different level (0 W, 150 W, 300 W, 450 W and 600 W) on the stability of emulsion were evaluated. The results showed that ultrasonic emulsification can significantly improve the stability of the emulsions (p < 0.05). The emulsion gained better stability and emulsifying property at 300 W. It was able to fabricate emulsion with smaller particle size, more uniform distribution and higher interfacial protein content. It was confirmed by fluorescent microscopy and cryo-scanning electron microscopy (cryo-SEM) furtherly. And it was also proved that the emulsion treated by proper HIU treatment at 300 W had better storage stability. Excessive HIU treatment (450 W, 600 W) had negative effects on the stability of emulsion. The stability of emulsion (300 W) against different environmental stresses was further explored, which established a theoretical basis for the industrial application of emulsion in food industry.     

Skin permeation of d-limonene-based nanoemulsions as a transdermal carrier prepared by ultrasonic emulsification

Nanoemulsions can be used for transporting pharmaceutical phytochemicals in skin-care products because of their stability and rapid permeation properties. However, droplet size may be a critical factor aiding permeation through skin and transdermal delivery efficiency. We prepared d-limonene nanoemulsions with various droplet sizes by ultrasonic emulsification using mixed surfactants of sorbitane trioleate and polyoxyethylene (20) oleyl ether under different hydrophilic–lipophilic balance (HLB) values. Droplet size decreased with increasing HLB value. With HLB 12, the droplet size was 23 nm, and the encapsulated ratio peaked at 92.3%. Transmission electron microscopy revealed spherical droplets and the gray parts were d-limonene precipitation incorporated in spherical droplets of the emulsion system. Franz diffusion cell was used to evaluate the permeation of d-limonene nanoemulsion through rat abdominal skin; the permeation rate depended on droplet size. The emulsion with the lowest droplet size (54 nm) achieved the maximum permeation rate. The concentration of d-limonene in the skin was 40.11 μL/cm² at the end of 360 min. Histopathology revealed no distinct voids or empty spaces in the epidermal region of permeated rat skin, so the d-limonene nanoemulsion may be a safe carrier for transdermal drug delivery.     

Ultrasound processed nanoemulsion: A comparative approach between resveratrol and resveratrol cyclodextrin inclusion complex to study its binding interactions,antioxidant activity and UV light stability

Resveratrol is a naturally occurring therapeutic molecule used for treatment of diseases caused by oxidative stress. This investigation elucidates the advantages of fabrication of size controlled resveratrol inclusion complex. This has been done by encapsulating resveratrol-cyclodextrin inclusion complex in a phospholipid stabilized nanoemulsion formulated by ultrasonication emulsification method. The prepared nanoemulsion has been compared with resveratrol encapsulated nanoemulsion system. The morphology of the resveratrol nanoemulsion and inclusion complex nanoemulsion have been observed using transmission electron microscopy with average size 20.41 ± 3.41 and 24.48 ± 5.70 nm respectively. The nanoemulsion showed good loading and release efficiency. The radical diminishing potential of resveratrol and its inclusion complex has been compared in nanoemulsion. The effect of UV irradiation (365 nm) on resveratrol in different solvent systems (ethanol, water and nanoemulsion) indicated that nanoemulsion prevents degradation of resveratrol. Efforts have also been made to explore the interactions between bovine serum albumin and resveratrol in nanoemulsion.     

Effect of ultrasonic pretreatment on the emulsification properties of Clanis Bilineata Tingtauica Mell protein

Clanis Bilineata Tingtauica Mell Protein (CBTMP) is a naturally high-quality insect protein resource, while its poor emulsification has limited its application in food industry. In order to change the present situation, in this research, the ultrasonic pretreatment (0 W, 200 W, 400 W, 600 W, and 800 W) method was used to improve the emulsification properties of CBTMP. Results indicated that ultrasound treatment especially at 400 W could significantly change the particle sizes, further increase the content of sulfhydryl group and surface hydrophobicity. The emulsification properties of emulsions were enhanced (from 4.16 ± 1.07 m²/g to 27.62 ± 2.20 m²/g) by sonicated CBTMP solution. Moreover, the physical stability of the emulsions to salt stress and centrifugation treatment was also promoted. Additionally, rheology revealed that a stronger network was formed at 400 W and all samples exhibited frequency-dependent and amplitude-dependent properties. The experiment demonstrated that ultrasound pretreatment was an effective means to improve the emulsification properties of CBTMP and it could provide a promising perspective for the application of CBTMP in food industry.     

Preparation of tuna skin collagen-chitosan composite film improved by sweep frequency pulsed ultrasound technology

To produce a natural food packaging film from tuna skin collagen (TSC) and chitosan (CTS) and improve its mechanical and physicochemical properties, the sweep frequency pulsed ultrasound (SFPU) was introduced as a new technology and compared with the conventional method. The optimum preparation conditions of the SFPU-TSC-CTS film were sweep frequency of 28 ± 0.5 kHz, power density of 100 W/L, sweep frequency cycle of 100 ms, pulse duty ratio of 77%, and ultrasonic time of 10 min. Significant increases in the tensile strength (27.14%) and elongation at break (16.54%) and a significant decrease in the water vapor permeability (12.15%) were observed by sonication. Thus, a moderate SFPU treatment can significantly improve the moisture resistance and mechanical properties of the film. These enhancements were achieved by a more ordered and compact structure, a good crystallinity and a higher thermostability of SFPU-TSC-CTS film, which were verified by the Fourier transform infrared spectroscopy (FTIR), circular dichroism (CD), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermal stability indexes. Moreover, SFPU-TSC-CTS film also presented good antioxidant and antibacterial activities. Therefore, SFPU was an effective auxiliary technology for improving the quality of food packaging film and can be deeply explored.     

Ultrasonic structural modification of myofibrillar proteins from Coregonus peled improves emulsification properties

This study evaluated the effects of high intensity ultrasonication (HIU, 100, 150, 200, and 250 W) and treatment time (0, 3, 6, 9, and 12 min) on the structure and emulsification properties of myofibrillar proteins (MPs) from Coregonus peled. These investigations were conducted using an ultrasonic generator at a frequency of 20 kHz (ultrasonic probe). Analysis of the carbonyl content and total number of sulfhydryl groups showed that HIU significantly improved the oxidative modification of MPs (P < 0.05). SDS-PAGE profiling showed significant degradation of the myosin heavy chain (P < 0.05). In addition, Fourier transformed infrared spectroscopy (FTIR) revealed that HIU altered these treated MP secondary structures, this was due to molecular unfolding and stretching, exposing interior hydrophobic groups. Particle size analysis showed that HIU treatment reduced particle sizes. Solubility, emulsification capacity, and emulsion stability were improved significantly, and each decreased with an increase in treatment time (up to 12 min), indicating aggregation with prolonged sonication. These results indicate that HIU could improve the emulsification properties of MPs from C. peled, demonstrating a promising method for fish protein processing.     

The modification of pomegranate polyphenol with ultrasound improves mechanical,antioxidant, and antibacterial properties of tuna skin collagen-chitosan film

To produce an edible film with high mechanical and physicochemical properties, Tuna skin collagen-chitosan (TSC-CTS) composite films were prepared by incorporating ultrasound (UT) and pomegranate polyphenols including gallic acid (GA), tannic acid (TA), and ellagic acid (EA), respectively. The tensile strength and the DPPH scavenging activity of the GA-UT-TSC-CTS film (ultrasound frequency of 28 ± 0.5 kHz, power of 100 W/L, sweep frequency cycle of 100 ms, duty ratio of 77% and time of 10 min; GA concentration of 1.0 g/L and reaction time of 10 min) were increased by 47.03% and 24.16 folds, respectively compared to the control (TSC-CTS film). Meanwhile, light transmittance and water vapor permeability of the GA-UT-TSC-CTS film were decreased by 29.26% and 15.70%, respectively. These positive modification results were attributed to the altered structure during the film formation process, which were verified by Fourier transform infrared spectroscopy (FTIR), circular dichroism (CD), X-ray diffraction (XRD), and thermogravimetry results. Moreover, the GA-UT-TSC-CTS film possessed moderate thermal stability and color indexes and improved antibacterial activity. The antibacterial effect of the film against Bacillus subtilis was the highest, followed by Escherichia coli, Listeria monocytogenes, and Staphylococcus aureus. Overall, the combination modification of gallic acid and ultrasound was an efficient modification method to improve the mechanical, antioxidant, and antibacterial properties of edible TSC-CTS films.     

Effect of ultrasonic power on the stability of low-molecular-weight oyster peptides functional-nutrition W1/O/W2 double emulsion

Ultrasonic-assisted treatment is an eco-friendly and cost-effective emulsification method, and the acoustic cavitation effect produced by ultrasonic equipment is conducive to the formation of stable emulsion. However, its effect on the underlying stability of low-molecular-weight oyster peptides (LOPs) functional-nutrition W₁/O/W₂ double emulsion has not been reported. The effects of different ultrasonic power (50, 75, 100, 125, and 150 W) on the stability of double emulsions and the ability to mask the fishy odor of LOPs were investigated. Low ultrasonic power (50 W and 75 W) treatment failed to form a well-stabilized double emulsion, and excessive ultrasound treatment (150 W) destroyed its structure. At an ultrasonic power of 125 W, smaller particle-sized double emulsion was formed with more uniform distribution, more whiteness, and a lower viscosity coefficient. Meanwhile, the cavitation effect generated by 125 W ultrasonic power improved storage, and oxidative stabilities, emulsifying properties of double emulsion by reducing the droplet size and improved sensorial acceptability by masking the undesirable flavor of LOPs. The structure of the double emulsion was further confirmed by optical microscopy and confocal laser scanning microscopy. The ultrasonic-assisted treatment is of potential value for the industrial application of double emulsion in functional-nutrition foods.     

Ultrasonic pretreatment improves the gelation properties of low-salt Penaeus vannamei (Litopenaeus vannamei) surimi

The effects of different ultrasonic pretreatments (120–600 W, 20 min; 360 W, 10–30 min) on the gel properties of shrimp surimi were investigated. Gel properties and protein functional properties were analysed to clarify the mechanism of action of ultrasound. The gel strength, water holding capacity and surface hydrophobicity of shrimp surimi gel increased initially and then decreased with the increase in ultrasound power or time, but the change in total sulfhydryl content showed the opposite trend, which indicated that proper ultrasound pretreatment could improve the gel properties of shrimp surimi, expand the protein to a greater extent and expose more SH groups and hydrophobic groups. According to scanning electron microscopy observation, ultrasound made shrimp surimi gel form a denser gel network. Fourier transform infrared analysis indicated that the α-helix content in shrimp surimi gel decreased initially and then increased with the increase of in ultrasound power or time, whereas the change in β-sheet content showed the opposite trend. And the protein was the most stable in 360 W/20 min pretreatment. SDS-PAGE patterns showed that proper ultrasound inhibited the degradation of actin and troponin C. In addition, dynamic rheology illustrated that the G′ values of the ultrasonic pretreatment group were higher than that of the control group, indicating that ultrasound could improve the elasticity and stability of shrimp surimi gel. The results suggested that the shrimp surimi gel pretreated by 360 W/20 min ultrasound showed the best gel properties. Furthermore, the correlation between the indexes affecting the properties of the gel was analyzed. This study provides a new technical means to improve the gel properties of shrimp surimi.     

Exploring the influence of ultrasound on the antibacterial emulsification stability of lysozyme-oregano essential oil

A lysozyme-oregano essential oil (Lys-OEO) antibacterial emulsion was developed via ultrasonic treatment. Based on the general emulsion materials of ovalbumin (OVA) and inulin (IN), the addition of Lys and OEO successfully inhibited the growth of E. coli and S. aureus, two representatives of which were Gram-negative and Gram-positive bacteria respectively. The emulsion system in this study was designed to compensate for the limitation that Lys could only act on Gram-positive bacteria, and the stability of the emulsion was improved using ultrasonic treatment. The optimal amounts among OVA, Lys and OEO were found to be the mass ratio of 1:1 (Lys to OVA) and 20% (w/w) OEO. The ultrasonic treatment at the power of 200, 400, 600, and 800 W and time length of 10 min improved the stability of emulsion, in which the surface tension was below 6.04 mN/m and the Turbiscan stability index (TSI) did not exceed 10. The multiple light scattering showed that sonicated emulsions were less prone to delamination; salt stability and pH stability of emulsions were improved, CLSM image showed emulsion as oil-in-water type. In the meantime, the particles of the emulsions were found to become smaller and more uniform with ultrasonic treatment. The best dispersion and stability of the emulsion were both achieved at 600 W with a zeta potential of 7.7 mV, the smallest particle size and the most uniform particle distribution.     

Fabrication of bilayer emulsion by ultrasonic emulsification: Effects of chitosan on the interfacial stability of emulsion

In this study, the stable system of bilayer emulsion was fabricated by ultrasonic emulsification. The effect of chitosan (CS) addition (0.05 %-0.4 %, w/v) at pH 5.0 on the stability of rice bran protein hydrolysate-ferulic acid (RBPH-FA) monolayer emulsion was investigated. It was found that the addition of CS (0.3 %) could form a stable bilayer emulsion. The droplet size was 3.38 μm and the absolute ζ-potential value was 31.52 mV. The bilayer emulsion had better storage stability, oxidation stability and environmental stabilities than the monolayer emulsion. The results of in vitro simulations revealed the bilayer emulsion was able to deliver the β-carotene to the small intestine digestive stage stably and the bioaccessibility was increased from 22.34 % to 61.36 % compared with the monolayer emulsion. The research confirmed that the bilayer emulsion prepared by ultrasonic emulsification can be used for the delivery of hydrophobic functional component β-carotene.     

Effects of ultrasound-assisted glycosylation on the interface and foaming characteristics of ovotransferrin

Ovotransferrin (OVT) is one of the major functional proteins in egg white protein. Most of the industry only paid attention the biological activity of OVT in iron supplement, antibacterial and other aspects, few reports were carried out on its processing characteristics such as foaming, interfacial behavior such as emulsification and foaming, which was an important processing functional attribute affecting its application scenario. In this study, the effects of ultrasound-assisted glycosylation on the interface and foaming characteristics of OVT were investigated. The results showed that proper ultrasonic treatment had a significant effect on the structure and physicochemical properties of OVT glycosylation products. When ultrasonic treatment lasted for 20 min, the grafting degree of OVT was 20.98%, the particle size decreased and the absolute value of potential increased. The foaming ability of OVT increased first and then decreased after ultrasonic-assisted glycosylation treatment. The foaming ability of OVT increased from 43.54% to 96.73% and the foaming stability increased from 68.92% to 89.19% after ultrasonic-assisted glycosylation treatment for 20 min. The experimental study effectively discovered the effect of ultrasound-assisted glycosylation on the foaming property of OVT, and would provide important technical references for expanding its application in food, biology, medicine and other fields.