Inactivation of the enveloped virus phi6 with hydrodynamic cavitation

The COVID −19 pandemic reminded us that we need better contingency plans to prevent the spread of infectious agents and the occurrence of epidemics or pandemics. Although the transmissibility of SARS-CoV-2 in water has not been confirmed, there are studies that have reported on the presence of infectious coronaviruses in water and wastewater samples. Since standard water treatments are not designed to eliminate viruses, it is of utmost importance to explore advanced treatment processes that can improve water treatment and help inactivate viruses when needed. This is the first study to investigate the effects of hydrodynamic cavitation on the inactivation of bacteriophage phi6, an enveloped virus used as a SARS-CoV-2 surrogate in many studies. In two series of experiments with increasing and constant sample temperature, virus reduction of up to 6.3 logs was achieved. Inactivation of phi6 at temperatures of 10 and 20 °C occurs predominantly by the mechanical effect of cavitation and results in a reduction of up to 4.5 logs. At 30 °C, the reduction increases to up to 6 logs, where the temperature-induced increased susceptibility of the viral lipid envelope makes the virus more prone to inactivation. Furthermore, the control experiments without cavitation showed that the increased temperature alone is not sufficient to cause inactivation, but that additional mechanical stress is still required. The RNA degradation results confirmed that virus inactivation was due to the disrupted lipid bilayer and not to RNA damage. Hydrodynamic cavitation, therefore, has the potential to inactivate current and potentially emerging enveloped pathogenic viruses in water at lower, environmentally relevant temperatures.     

Degradation of benzene present in wastewater using hydrodynamic cavitation in combination with air

The degradation of benzene present in wastewater using hydrodynamic cavitation (HC) alone as well as in combination with air has been studied using nozzles as cavitating device of HC reactor. Initially, the energy efficiency of the HC reactor operated at different inlet pressures was determined using the calorimetric studies. Maximum energy efficiency of 53.4% was obtained at an inlet pressure of 3.9 bar. The treatment processes were compared under adiabatic as well as isothermal conditions and it was observed that under the adiabatic condition, the extent of degradation is higher as compared to isothermal condition. Studies related to the understanding the effect of inlet pressure (range of 1.8–3.9 bar) revealed that the maximum degradation as 98.9% was obtained at 2.4 bar pressure using the individual operation of HC under adiabatic conditions and in 70 min of treatment. The combination of HC with air was investigated at different air flow rates with best results for maximum degradation of benzene achieved at air flow rate of 60 mL/sec. A novel approach of using cavitation for a limited fraction of total treatment time was also demonstrated to be beneficial in terms of the extent of degradation as well as energy requirements and cost of operation. Based on the cavitational intensity, the resonant radius of aggregates of cavitation bubbles was also determined for distilled water as well as for aqueous solution of benzene. Overall, significant benefits of using HC combined with air have been demonstrated for degradation of benzene along with fundamental understanding into cavitation effects.     

Hybrid hydrodynamic cavitation (HC) technique for the treatment and disinfection of lake water

Water reclamation from lakes needs to be accomplished efficiently and affordably to ensure the availability of clean, disinfected water for society. Previous treatment techniques, such as coagulation, adsorption, photolysis, ultraviolet light, and ozonation, are not economically feasible on a large scale. This study investigated the effectiveness of standalone HC and hybrid HC + H₂O₂ treatment techniques for treating lake water. The effect of pH (3 to 9), inlet pressure (4 to 6 bar), and H₂O₂ loading (1 to 5 g/L) were examined. At pH = 3, inlet pressure of 5 bar and H₂O₂ loadings of 3 g/L, maximum COD and BOD removal were achieved·H₂O₂ was observed to significantly improve the performance of the HC when used as a chemical oxidant. In an optimal operating condition, a COD removal of 54.5 % and a BOD removal of 51.5 % using HC alone for 1 h is observed. HC combined with H₂O₂ removed 64 % of both COD and BOD. The hybrid HC + H₂O₂ treatment technique resulted in a nearly 100% removal of pathogens. The results of this study indicate that the HC-based technique is an effective method for removing contaminants and disinfection of the lake water.     

Intensification of biogas production using pretreatment based on hydrodynamic cavitation

The present work investigates the application of hydrodynamic cavitation (HC) for the pretreatment of wheat straw with an objective of enhancing the biogas production. The hydrodynamic cavitation reactor is based on a stator and rotor assembly. The effect of three different speeds of rotor (2300, 2500, 2700 rpm), wheat straw to water ratios (0.5%, 1% and 1.5% wt/wt) and also treatment times as 2, 4 and 6 min have been investigated in the work using the design of experiments (DOE) approach. It was observed that the methane yield of 31.8 ml was obtained with untreated wheat straw whereas 77.9 ml was obtained with HC pre-treated wheat straw confirming the favourable changes during the pre-treatment. The combined pre-treatment using KOH and HC gave maximum yield of biogas as 172.3 ml. Overall, it has been established that significant enhancement in the biogas production can be obtained due to the pretreatment using HC which can also be further intensified by combination with chemical treatment.     

Cytopathological potato virus Y structures during Solanaceous plants infection

The ultrastructural analysis of tobacco, potato and pepper tissues during infection with necrotic strains and the ordinary Potato virus Y strain of revealed the presence of virus inclusions not only in the epidermis and mesophyll but also in the vascular tissues. For the first time cytoplasmic inclusions were documented in companion cells and phloem parenchyma as well as in xylem tracheary elements. The ultrastructural features studied in this work consisted of mostly laminated inclusions (in the traverse and longitudinal section), which were frequently connected with enlarged cisternae of endoplasmic reticulum (ER) located in the direct vicinity of the cell wall attached to virus particles opposite to plasmodesmata. It was noticed that ER participates in synthesis and condensation of the PVY inclusions. During compatible interaction of tobacco and potato plants with PVY, amorphous and nuclear inclusions were observed. Such forms were not found in pepper tissues and potato revealing the hypersensitivity reaction to the infection with PVY necrotic strains. It was stated that the forms of cytoplasmic inclusions cannot serve as a cytological criterion to distinguish the potato virus Y strains and do not depend on host resistance level. Only in compatible interaction in Solanaceous plants tissues cytoplasmic inclusions were observed from the moment the morphological symptoms appeared. In the reaction of hypersensitivity, the inclusions were found on the 24th day following the infection with the PVY necrotic strains, whereas the symptoms were observed 3 days after the PVY infection.     

Simultaneous hydrodynamic cavitation and glow plasma discharge for the degradation of metronidazole in drinking water

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10⁻⁶ mol L⁻¹ MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10⁻⁶ S cm⁻¹. The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10⁻³ mol H₂O₂ L⁻¹ in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10⁻³ mol H₂O₂ L⁻¹. Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.     

Effective control of antibiotic resistance using a sonication-based combinational treatment and its application to fresh food

Antibiotics have been widely used to treat several infectious diseases. However, the overuse of antibiotics has promoted the emergence and spread of antibiotic resistant bacteria (ARB) in various fields, including the food industry. In this study, the antimicrobial efficacies of two conventional sterilization methods, mild heat, and sonication, were evaluated and optimized to develop a new strategy against ARB. Simultaneous mild heat and sonication (HS) treatment led to a significant reduction in viable cell counts, achieving a 5.58-log reduction in 4 min. However, no remarkable decrease in viable cell counts was observed in individually treated groups. Interestingly, the release of antibiotic resistance genes (ARGs) increased in a time-dependent manner in the heat-treated and HS-treated groups. The inactivation levels of ARGs increased as the HS treatment time increased from 2 to 8 min, and most ARGs were degraded after 8 min. In contrast, no significant inactivation of ARGs was observed in the heat-treated and sonication-treated groups after 8 min. These results reveal the synergistic effect of the combination treatment in controlling not only ARB but also ARGs. Finally, on applying this newly developed combination treatment to fresh food (cherry tomato and carrot juice), 3.97- and 4.28-log microbial inactivation was achieved, respectively. In addition, combination treatment did not affect food quality during storage for 5 days. Moreover, HS treatment effectively inactivated ARGs in fresh food systems.     

Intensifying extraction of biomolecules from macroalgae using vortex based hydrodynamic cavitation device

Macroalgae have a tremendous potential to become an important renewable resource for valuable biomolecules and chemicals. New and improved ways of cell disruption and of enhancing rate as well as yield of extraction of valuable products from macroalgae are needed to fully realise this potential. In this work, hydrodynamic cavitation (HC) was used for intensifying rate and yield of extraction of phycoerythrin, proteins and carbohydrates from marine macroalgae Palmaria palmata. We use vortex-based HC devices which do not use small restrictions like orifice-based HC devices or moving parts like rotor–stator based HC devices. A bench scale setup with a nominal slurry flow rate of 20 LPM was established. Dried and powdered macroalgae was used. Influence of key operating parameters like pressure drop and number of passes on extraction performance (the rate and yield) was measured. A simple, yet effective model was developed and used for interpreting and describing experimental data. The results indicate that there exists an optimum pressure drop across the device at which extraction performance is maximum. The extraction performance with HC was found to be significantly better than the stirred vessels. HC has resulted in 2 to 20 times improvement in the rate of extraction of phycoerythrin (R-PE), proteins and carbohydrates. Based on the results obtained in this work, pressure drop of 200 kPa and number of passes through the HC devices of about 100 were found to be most effective for HC-assisted intensified extraction from macroalgae. The presented results and model will be useful for harnessing vortex-based HC devices for intensifying the extraction of valuable products from macroalgae.     

Localisation of hydrogen peroxide accumulation during Solanum tuberosum cv. Rywal hypersensitive response to Potato virus Y

The reactive oxygen species hydrogen peroxide (H₂O₂) was detected cytochemically in Solanum tuberosum cv. Rywal tissues as a hypersensitive response (HR) 24 and 48 h after a Potato virus Y (PVY) infection.Hydrogen peroxide was detected in vivo by its reaction with 3.3-diaminobenzidine, producing a reddish-brown staining in contact with H₂O₂. Hydrogen peroxide was detected in the necrotic area of the epidermal and mesophyll cells 24 and 48 h after the PVY infection. Highly localised accumulations of H₂O₂ were found within xylem tracheary elements, and this was much more intensive than in non-infected leaves. Hydrogen peroxide was detected cytochemically in HR also by its reaction with cerium chloride, producing electron-dense deposits of cerium perhydroxides.Inoculation with PVY^NTN and also PVY^N Wi induced a rapid hypersensitive response during which highly localised accumulations of H₂O₂ was detected in plant cell walls. The most intensive accumulation was present in the bordering cell walls of necrotic mesophyll cells and the adjacent non-necrotic mesophyll cells. Intensive electron-dense deposits of cerium perhydroxide were found along ER cistrenae and chloroplast envelopes connected with PVY particles. The precipitates of hydrogen peroxide were detected in the nuclear envelope and along tracheary elements, especially when virus particles were present inside. The intensive accumulation of H₂O₂ at the early stages of potato–PVY interaction is consistent with its role as an antimicrobial agent and for this reason it has been regarded as a signalling molecule.     

Inactivation of foodborne pathogens based on synergistic effects of ultrasound and natural compounds during fresh produce washing

Ultrasound has potential to be used for disinfection, and its antimicrobial effectiveness can be enhanced in presence of natural compounds. In this study, we compared the antimicrobial effects of ultrasound at 20 kHz (US 20 kHz) or 1 MHz (US 1 MHz) in combination with carvacrol, citral, cinnamic acid, geraniol, gallic acid, lactic acid, or limonene against E. coli K12 and Listeria innocua at a constant power density in water. Compared to the cumulative effect of the individual treatments, the combined treatment of US 1 MHz and 10 mM citral generated >1.5 log CFU/mL additional inactivation of E. coli K12. Similarly, combined treatments of US 1 MHz and 2 mM carvacrol (30 min), US 20 kHz and 2 mM carvacrol, 10 mM citral, or 5 mM geraniol (15 min) generated >0.5–2.0 log CFU/mL additional inactivation in L. innocua. The synergistic effect of citral, as a presentative compound, and US 20 kHz treatment was determined to be a result of enhanced dispersion of insoluble citral droplets in combination with physical impact on bacterial membrane structures, whereas the inactivation by US 1 MHz was likely due to generation of oxidative stress within the bacteria. Combined ultrasound and citral treatments improved the bacterial inactivation in simulated wash water in presence of organic matter or during washing of inoculated blueberries but only additive antimicrobial effects were observed. Findings in this study will be useful to enhance fresh produce safety and shelf-life and design other alternative ultrasound based sanitation processes.     

The research on the pulsed arc electrohydraulic discharge and its application in treatment of the ballast water

Since the tech of Pulsed Arc Electrohydraulic Discharge (PAED) found wide application, immense amounts of concrete research have been put into use on seawater treatment. When the breakdown of electrodes submerged in ballast water, strong pressure wave, ultraviolet ray, active groups, etc. can be generated, accompanying with the distinct electrohydraulic effect. Therefore, it shows the best performance on the inactivation of bacterium and seaweeds lives in the seawater. The experiment of the PAED reactor with different volume (from 10 L to 2 T) was performed step by step. The PAED power supply is 1 kJ/pulse and discharge frequency is 0.5 Hz. The best performance for the inactivation of bacterium and seaweeds by PAED is related to the conductivity of ballast water, the capacity of the treatment cell and the pulse energy. The inactivation mechanisms of PAED on ballast water will be discussed based on the electrohydraulic effect.     

Cellular localisation of calcium ions during potato hypersensitive response to Potato virus Y

Ca(2+) is one of the most universal and versatile signalling molecules and is involved in almost every aspect of cellular processes. Accumulating evidence suggests that Ca(2+) serves as a messenger in many growth and developmental processes and in plant responses to biotic and abiotic stresses. Numerous signals have been shown to induce transient elevation of cytoplasmic [Ca(2+)](cyt) in plants. The calcium free ions were detected cytochemically in Solanum tuberosum cv. Rywal tissues as a hypersensitive response (HR) from 10h to 5 days after a Potato virus Y (PVY) infection. Calcium was detected in vivo by its reaction with Alizarin S Red, producing an intense red staining in contact with calcium free ions. Calcium was found in the necrotic area of the epidermal and mesophyll cells 3 days after the PVY infection (when morphological symptoms on potato leaves appeared). Calcium ions were detected cytochemically in HR also by its reaction with potassium pyroantimonate. Inoculation with PVY(NTN) and also PVY(N) Wi induced a rapid hypersensitive response during which highly localised increased accumulation of electron-dense deposits of calcium pyroantimonate were detected. Calcium deposition was observed in necrotic and non-necrotic areas, starting from 10h after PVY infection. The deposits were present along ER cisternae, chloroplasts and mitochondria envelopes connected with PVY particles. The precipitates of calcium antimonate were detected near the nuclear envelope, inside karyolymph and along tracheary elements, especially when virus particles were present inside.     

ANN based modelling of hydrodynamic cavitation processes: Biomass pre-treatment and wastewater treatment

We have developed artificial neural network (ANN) based models for simulating two application examples of hydrodynamic cavitation (HC) namely, biomass pre-treatment to enhance biogas and degradation of organic pollutants in water. The first case reports data on influence of number of passes through HC reactor on bio-methane generation from bagasse. The second case reports data on influence of HC reactor scale on degradation of dichloroaniline (DCA). Similar to most of the HC based applications, the availability of experimental data for these two applications is rather limited. In this work a systematic methodology for developing ANN model is presented. The models were shown to describe the experimental data very well. The ANN models were then evaluated for their ability to interpolate and extrapolate. Despite the limited data, the ANN models were able to simulate and interpolate the data for two very different and complex HC applications very well. The extrapolated results of biomethane generation in terms of number of passes were consistent with the intuitive understanding. The extrapolated results in terms of elapsed time were however not consistent with the intuitive understanding. The ANN model was able to generate intuitively consistent extrapolated results for degradation of DCA in terms of number of passes as well as scale of HC reactor. The results will be useful for developing quantitative models of complex HC applications.     

Hydrodynamic cavitation-enhanced photocatalytic activity of P-doped TiO2 for degradation of ciprofloxacin: Synergetic effect and mechanism

Hybrid methods with an enhanced oxidation capacity have been proposed for the removal of organic contaminants based on combining hydrodynamic cavitation (HC) with advanced oxidation processes (AOPs). In this study, we utilize the synergetic effect between photocatalytic processes and HC to strengthen ciprofloxacin (CIP) degradation by P-doped TiO₂ catalysts. In comparison to a degradation ratio of 20.37 % in HC and 55.7 % in P-TiO₂-based photocatalytic processes alone, the CIP degradation ratio reached as high as 90.63 % in HC-assisted photocatalytic processes with the optimal experimental parameters. The mechanic microjets treatment originated from HC make P-TiO₂ nano photocatalysts with significantly increased surface area, smaller particle sizes, cleaner surface and improved dispersion, which were found using SEM, TEM, and BET analysis. Possible degradation mechanisms and reaction pathways of CIP during hybrid HC + photocatalytic processes were explored by coupling free radical capture experiments and liquid chromatography-mass spectrometry . This hybrid HC + photocatalytic technique has a potential application in the treatment of antibiotic sewage at the industrial level.     

Influence of pH on inactivation of aquatic microorganism with a gas–liquid pulsed electrical discharge

Inactivation of Escherichia coli in water was experimentally studied, with pulsed electrical discharges in a hybrid gas–liquid reactor. The pH was dramatically decreased from 7 to ～3 within 60 min, accompanying with a 6-log reduction. To evaluate the contribution of pH on inactivation, a set of experiments were designed and tested. Results indicate that the contribution of low pH to the inactivation could be neglected compared to that of electrical discharges. On the other hand, the decrease of pH could be eased as carbonate or phosphate buffer was added to the treated water. However, the inactivation efficiency was greatly reduced because the buffers could deplete the active species formed in electrical discharges. Besides, a new finding is addressed in this paper that the water after plasma treatment still owns a certain extent of inactivation ability, functioning like the free chlorine residual. The environmental adaptation ability of E. coli to electrical discharges was also investigated.     

Scale-up of vortex based hydrodynamic cavitation devices: A case of degradation of di-chloro aniline in water

Hydrodynamic cavitation (HC) is being increasingly used in a wide range of applications. Unlike ultrasonic cavitation, HC is scalable and has been used at large scale industrial applications. However, no information about influence of scale on performance of HC is available in the open literature. In this work, we present for the first time, experimental data on use of HC for degradation of complex organic pollutants in water on four different scales (~200 times scale-up in terms of capacity). Vortex based HC devices offer various advantages like early inception, high cavitational yield and significantly lower propensity to clogging and erosion. We have used vortex based HC devices in this work. 2,4 dichloroaniline (DCA) – an aromatic compound with multiple functional groups was considered as a model pollutant. Degradation of DCA in water was performed using vortex-based HC devices with characteristic throat dimension, d_t as 3, 6, 12 and 38 mm with scale-up of almost 200 time based on the flow rates (1.3 to 247 LPM). Considering the experimental constraints on operating the largest scale HC device, the experimental data is presented here at only one value of pressure drop across HC device (280 kPa). A previously used per-pass degradation model was extended to describe the experimental data for the pollutant used in this study and a generalised form is presented. The degradation performance was found to decrease with increase in the scale and then plateaus. Appropriate correlation was developed based on the experimental data. The developed approach and presented results provide a sound basis and a data set for further development of comprehensive multi-scale modelling of HC devices.     

Combination of supercritical CO2 and high-power ultrasound for the inactivation of fungal and bacterial spores in lipid emulsions

For the first time, this study addresses the intensification of supercritical carbon dioxide (SC-CO₂) treatments using high-power ultrasound (HPU) for the inactivation of fungal (Aspergillus niger) and bacterial (Clostridium butyricum) spores in oil-in-water emulsions. The inactivation kinetics were analyzed at different pressures (100, 350 and 550 bar) and temperatures (50, 60, 70, 80, 85 °C), depending on the microorganism, and compared to the conventional thermal treatment. The inactivation kinetics were satisfactorily described using the Weibull model.Experimental results showed that SC-CO₂ enhanced the inactivation level of both spores when compared to thermal treatments. Bacterial spores (C. butyricum) were found to be more resistant to SC-CO₂ + HPU, than fungal (A. niger) ones, as also observed in the thermal and SC-CO₂ treatments. The application of HPU intensified the SC-CO₂ inactivation of C. butyricum spores, e.g. shortening the total inactivation time from 10 to 3 min at 85 °C. However, HPU did not affect the SC-CO₂ inactivation of A. niger spores. The study into the effect of a combined SC-CO₂ + HPU treatment has to be necessarily extended to other fungal and bacterial spores, and future studies should elucidate the impact of HPU application on the emulsion’s stability.     

Influence of co-existing cations and anions on removal of direct red 89 dye from synthetic wastewater by hydrodynamic cavitation process: An empirical modeling

In the present study the evaluation of Direct Red 89 (DR89) dye removal from synthetic wastewater by a lab-scale hydrodynamic cavitation (HC) process has been investigated under different operational conditions; the influence of co-existing cations and anions was applied using synthetic wastewater to assess whether the DR89 removal was enhanced. To study the effect of operational parameters, an empirical approach was adopted for the modeling of the HC process. The results showed that the DR89 degradation rate was strongly influenced by solution pH, reaction time and initial DR89 concentration. The removal efficiencies of DR89 were enhanced remarkably with the reaction time increment. When the initial concentration of DR89 increased from 30 to 90 mg/L, the DR89 removal efficiency decreased from 36.3 ± 3.8% to 17.5 ± 2.5%. In addition, the highest DR89 removal efficiency (75.4 ± 3.4%) was observed at a solution pH of 3. At a solution pH of 8, the DR89 removal efficiency was 18.4 ± 1.1%. An initial DR89 concentration of 80 mg/L was 75.4 ± 5.1% degraded after 130 min at a solution pH of 3. The results indicated that a synergistic effect occurred due to the added ions except for HCO₃^–. The removal of DR89 by the HC process was extremely enhanced with NO₃‾ ions with synergetic index higher than 2.5. Kinetic studies revealed that the decolorization of DR89 by HC followed a first order kinetic mechanism. The comparison between the predicted results of the empirical model and experimental data was also conducted. The empirical model described the DR89 removal efficiency under different conditions (R²: 0.93) and the results showed the HC reaction to be a useful technology for the treatment of dye in the textile wastewater.     

Noninvasive assessment of abdominal adipose tissues and quantification of hepatic and pancreatic fat fractions in type 2 diabetes mellitus

The purpose of this study was to evaluate adipose tissue distributions and hepatic and pancreatic fat contents using a 6-point Dixon MRI technique in type 2 diabetes mellitus (T2DM), and to assess associations between fat distributions and biochemical markers of insulin resistance. Intra-abdominal MRI was investigated in 14 T2DM patients, 13 age- and sex-matched healthy controls (HC) and 11 young HC using a 3 T Prisma MRI scanner. All T2DM subjects completed a fasting comprehensive metabolic panel, and demographic measurements were taken according to standardized methodologies. We observed excellent correlation (R² = 0.94) between hepatic fat fraction quantified using 6-point Dixon MRI and gold standard MRS, establishing the accuracy and reliability of the Dixon technique. Significantly increased visceral adipose tissue (VAT) volumes were found in T2DM patients compared to age-matched HC (1569.81 ± 670.62 cm³ vs. 1106.60 ± 566.85 cm³, p = .04). We also observed a trend of increasing subcutaneous adipose tissues (SAT), and total abdominal fat (TAT) volumes in T2DM compared to age-matched HC. Hepatic fat fraction percentage (HFF%) was 44.6% higher in T2DM compared to age-matched HC and 64.4% higher compared to young HC. Pancreatic fat fractions in the head and body/tail were higher in T2DM patients compared to both healthy cohorts. We also observed correlations between fat contents of the liver and pancreas in T2DM patients, and association between biochemical markers of T2DM with HFF, indicating a risk for non-alcoholic fatty liver disease among T2DM. In summary, this study provides evidence of T2DM patients having increased liver and pancreatic fat, as well as increased adipose tissues.     

Effect of nonionic surfactant addition on Pyrex glass ablation using water-assisted CO2 laser processing

Pyrex glass etching using laser ablation is an important technology for the microfluid application to lab-on-a-chip devices but suffers from the formation of surface crack. In this article, the addition of nonionic surfactant to water for glass ablation using water-assisted CO₂ laser processing (WACLAP) has been investigated to enhance ablation rate and to eliminate conventional surface defects of cracks in air. WACLAP for Pyrex glass ablation can reduce thermal-stress-induced crack with water cooling and hydrophilic nonionic surfactant to water can enhance ablation performance. Compared to pure water, the 15% weight percent Lauramidopropyl Betaine surfactant solutions for WACLAP can enhance ablation rate from 13.6 to 25 μm/pass of Pyrex glass ablation at a linear laser energy density of 2.11 J/cm, i.e., 24 W power, 114 mm/s scanning speed, and obtain through-wafer etching at 3.16 J/cm for 20 passes without cracks on the surface. Effect of surfactant concentration and linear energy density on WACLAP was also examined. The possible mechanism of surfactant-enhanced phenomenon was discussed by the Newton’s law of viscosity of surfactant solution.