Silylated Cyclohexadienes in Radical Chain Hydrosilylations

A new method for the mild radical hydrosilylation of alkenes and alkynes is described. Silylated cyclohexadienes that can be readily prepared on large scale are used as radical hydrosilylating reagents. Non‐activated alkenes and alkynes are hydrosilylated in high yields. The reaction can be combined with C C bond formation, as demonstrated for the preparation of silylated cycloalkanes from the corresponding dienes. Furthermore, radical hydrosilylations in combination with β‐fragmentation reactions for the synthesis of allylsilanes and hydrosilylations of aldehydes and ketones providing protected alcohols can be readily performed by this strategy.     

Sequential catalytic process: synthesis of quinoline derivatives by AuCl3/CuBr-catalyzed three-component reaction of aldehydes, amines, and alkynes

A sequential catalytic process has been developed based on gold-catalyzed nucleophilic addition of terminal alkynes to imines, and gold-catalyzed intramolecular reaction of aromatic ring to alkynes. This one-pot reaction of aldehydes, amines, and alkynes gives quinoline derivatives in good yields.     

Copper-catalyzed hydrative amide synthesis with terminal alkyne, sulfonyl azide, and water

It is shown for the first time that N-sulfonyl amides can be efficiently prepared by an unconventional approach of the hydrative reaction between terminal alkynes, sulfonyl azides, and water in the presence of copper catalyst and amine base under very mild conditions. The present route is quite general, and a wide range of alkynes and sulfonyl azides are readily coupled catalytically with water to furnish amides in high yields. A variety of labile functional groups are tolerated under the conditions, and the reaction is regioselective in that only terminal alkynes react while double or internal triple bonds are intact. The reaction can be readily scaled up and is also adaptable to a solid-phase procedure with high efficiency.     

A catalytic synthesis of dihydrofuran-3(2H)-imine skeletons from isocyanides,terminal alkynes,and oxiranes

In this catalytic multicomponent reaction, the nucleophilicity of terminal alkynes and isocyanides towards oxiranes has been explored. The reaction outcome depends highly on solvent, bases, and catalysts sources. An array of terminal alkynes, isocyanides, and oxiranes has been examined to explore the of this transformation. The reactions proceeded through S_N2 path and in regioselective manner.     

A microwave-enhanced, solventless Mannich condensation of terminal alkynes and secondary amines with para-formaldehyde on cuprous iodide doped alumina

A microwave-enhanced, solventless Mannich condensation of terminal alkynes and secondary amines with para-formaldehyde on cuprous iodide doped alumina has been developed. β-Aminoalkynes are generated in good yields. The reaction can be extended to include a cyclization, which affords 2-substituted benzo[b]furans. The chemoselectivity of the reaction indicates that terminal alkynes are much more reactive than enolizable ketones under the reaction conditions.     

Reaction of allylsilanes and allylstannanes with alkynes catalyzed by electrophilic late transition metal chlorides

The intramolecular reaction of allylsilanes and allylstannanes with alkynes proceeds catalytically in the presence of Pt(II), Pd(II), Ru(II), and Au(III) chlorides. Although more limited, AgOTf also catalyzes the cyclization. Usually, PtCl2 as the catalyst in methanol or acetone gives the best results. The reaction proceeds by exo attack of the allyl nucleophile on the alkyne to form five- or six-membered ring carbocycles. The reaction generally proceeds with anti stereoselectivity. However, a terminally substituted trimethylsilyl derivative reacts by a syn-type addition. The intermediate alkenylpalladium complex has been trapped with allyl chloride to form an allylated derivative with an additional carbon-carbon bond.     

Gold(I)-catalyzed intermolecular addition of carbon nucleophiles to 1,5- and 1,6-enynes

Gold(I)-catalyzed addition of carbon nucleophiles to 1,6-enynes gives two different type of products by reaction at the cyclopropane or at the carbene carbons of the intermediate cyclopropyl gold carbenes. The 5-exo-dig cyclization is followed by most 1,6-enynes, although those bearing internal alkynes and alkenes react by the 6-endo-dig pathway. The cyclopropane versus carbene site-selectivity can be controlled in some cases by the ligand on the gold catalyst. In addition to electron-rich arenes and heteroarenes, allylsilanes and 1,3-dicarbonyl compounds can be used as the nucleophiles. In the reaction of 1,5-enynes with carbon nucleophiles, the 5-endo-dig pathway is preferred.     

A regioselective Ru-catalyzed alkene-alkyne coupling

[reaction: see text] The reaction of silylalkynes and terminal alkenes proceeds with complete control of regioselectivity by the silyl substituent to give geometrically defined vinylsilanes. Since terminal alkynes normally give mixtures, protodesilylation of these adducts then constitutes a regioselective addition of terminal alkynes to terminal alkenes.     

Palladium-catalyzed cross-coupling reaction of aryl trimethoxysilanes with terminal alkynes

A palladium-catalyzed cross-coupling reaction of aryl trimethoxysilanes with terminal alkynes was described. Thus, di-substituted alkynes were prepared in moderate to good yields. The electron-deficient terminal alkynes also worked well in the procedure.     

Photoinduced Copper‐Catalyzed Regioselective Synthesis of Indoles: Three‐Component Coupling of Arylamines,Terminal Alkynes,and Quinones

The first successful example of a visible‐light‐induced copper‐catalyzed process for C? H annulation of arylamines with terminal alkynes and benzoquinone is described. This three‐component reaction allows use of a variety of commercial terminal alkynes as coupling partners for the one‐step regioselective synthesis of functionalized indoles. Moreover, the current process represents a sustainable and atom‐economical approach for the preparation of complex indoles from easily accessible starting materials under visible‐light irradiation, without the need for expensive metals and harsh reaction conditions.     

Sonogashira Coupling Reaction with Palladium Powder,Potassium Fluoride in Aqueous Media

Abstract

A Sonogashira coupling reaction of aromatic iodides and bromides with terminal alkynes in the presence of palladium powder, potassium fluoride, cuprous iodide, and triphenylphosphine in aqueous media was developed. The reaction generates the corresponding coupling products aryl alkynes in good to excellent yields.     

Photoinduced Copper‐Catalyzed Regioselective Synthesis of Indoles: Three‐Component Coupling of Arylamines,Terminal Alkynes,and Quinones

The first successful example of a visible‐light‐induced copper‐catalyzed process for C H annulation of arylamines with terminal alkynes and benzoquinone is described. This three‐component reaction allows use of a variety of commercial terminal alkynes as coupling partners for the one‐step regioselective synthesis of functionalized indoles. Moreover, the current process represents a sustainable and atom‐economical approach for the preparation of complex indoles from easily accessible starting materials under visible‐light irradiation, without the need for expensive metals and harsh reaction conditions.     

Rhodium(I)-catalyzed [4+2+2] cycloadditions of 1,3-dienes, alkenes, and alkynes for the synthesis of cyclooctadienes

The first [4+2+2] cycloadditions involving terminal alkynes and diene-enes, including a fully intramolecular example, are reported resulting in the formation of cyclooctadienes using [RhCl(CO)2]2 (5 mol %) treated with AgSbF6 (10 mol %) as a precatalyst. The reaction is general for a variety of terminal alkynes, as well as variously substituted diene-enes (yields up to 88%).     

Cu(OTf)2-catalyzed arylmethylation of terminal alkynes with benzylic alcohols under ligand-, base-, and additive-free reaction conditions

An effective, convenient, and mild coupling reaction of benzylic alcohols with terminal alkynes has been developed. As an effective Lewis acid, Cu(OTf)₂-catalyzed arylmethylation of terminal alkynes with benzylic alcohols generated the corresponding products in BrCH₂CH₂Br with good yields in the absence of ligand, base, and additive.     

Mild and selective palladium-catalyzed dimerization of terminal alkynes to form symmetrical (Z,Z)-1,4-dihalo-1,3-dienes

A regioselective and stereoselective palladium-catalyzed dimerization of terminal alkynes method for the synthesis of symmetrical (Z,Z)-1,4-dihalo-1,3-dienes is presented. In the presence of a catalytic amount of PdX(2) and 3 equiv of CuX(2) (X = Cl and Br), terminal alkynes were dimerized to afford (Z,Z)-1,4-dihalo-1,3-dienes in good yields. The results showed that the effect of solvent had a fundamental influence on the chemoselectivity of the dimerization reaction. The mechanism of the palladium-catalyzed dimerization reaction is also discussed.     

Room temperature palladium catalysed coupling of acyl chlorides with terminal alkynes

Conditions are reported for the facile, high-yielding coupling of acyl chlorides with terminal alkynes in a reaction involving palladium and copper iodide; the reaction is tolerant of a wide variety of acyl chlorides and terminal alkynes and provides a convenient one-pot route to acetylenic ketones.     

Chemo- and regioselective assembly of polysubstituted pyridines and isoquinolines from isocyanides, arynes, and terminal alkynes

We have disclosed a general and efficient synthetic strategy for polysubstituted pyridines and isoquinolines with high chemo- and regioselectivity. In this methodology, 1-alkynyl imines act as the key compound to undergo a sequential alkynyl imine-allenyl imine isomerization/aza-Diels-Alder reaction/aromatization. In the first place, 1-alkynyl imines were formed in situ by a highly selective multicomponent reaction of isocyanides, arynes, and terminal alkynes and reacted with another molecule of arynes or terminal alkynes to furnish target heterocyclic products in a highly efficient and atom-economic manner. On the other hand, we attempted to prepare 1-alkynyl imines by other approaches to undergo a similar reaction sequence to afford polysubstituted pyridines and isoquinolines with a wider range. Different from the first approach, the second approach utilized the preprepared 1-alkynyl imines to introduce the related different substitutents into the final products: arynes or terminal alkynes bearing substituents different from those of 1-alkynyl imines have been successfully applied for the synthesis a wide variety of pyridines and isoquinolines with diversity.     

InCl3 and ZrCl4 catalyzed regioselective reaction of 2,2′-dihydroxybiphenyl with terminal alkynes: synthesis of new dibenzo[d,f][1,3]dioxepines

The regioselective reaction of 2,2′-dihydroxybiphenyl with terminal alkynes was found to be rapidly catalyzed by InCl₃ and ZrCl₄. The chemoselectivity of catalysts and alkynes for biphenol over water, together with the reaction mechanism are discussed in details.     

One-pot synthesis of 5-sulfonamidopyrazole from terminal alkynes, sulfonyl azides and hydrozones

5-Sulfonamidopyrazoles were efficiently synthesized from terminal alkynes, sulfonyl azides and hydrozones. The sequential reaction involves a copper-catalyzed three-component reaction, a Lewis acid-catalyzed electrocyclic reaction and a dehydrogenation.     

超临界二氧化碳中PdCl2-CuCl2体系催化末端炔烃氧化偶联反应

研究了在超临界二氧化碳中实现PdCl₂-CuCl₂体系催化末端炔烃的氧化偶联反应, 研究结果表明: 催化剂、超临界二氧化碳及其共溶剂对反应结果有着重要的影响, 炔烃的取代基会影响末端炔烃在氧化偶联反应中的反应活性.