1，2-二[3-（6，8-二叔丁基-3，4-二氢-1，3-苯并噁嗪）基]乙烷的合成及晶体结构

N-取代的3，4-二氢-1，3-苯并噁嗪具有生物活性，是潜在的安定剂和镇静剂，还是制备酚醛树脂的潜在中间体。一般以酚、伯胺和甲醛为原料，通过Mannish缩合反应来制备。本文通过2，4-二叔丁基苯酚、乙二胺和甲醛反应，合成了亚乙基桥联的双噁嗪，X-射线单晶衍射测定了它的晶体结构。     

3-（2-呋喃基）-4-芳基-1，2，4-三唑啉-5-硫酮的合成及生物活性

1-（2-呋喃甲酰基）-4-芳基氨基硫脲经过环化反应，制备了一系列新的化合 物3-（2-呋喃基）-4-芳基-1，2，4-三唑啉-5-硫酮类化合物，并通过元素分析和 IR，^1H NMR等波谱数据确证了上述化合物的结构。初步的生物活性实验表明其中 有些化合物的具有非常好的植物生长调节活性。     

铟参与的4-溴-1，1，1-三氟-2-丁烯与α-烷氧基醛亚胺的烯丙化反应：4，4，4-三氟-γ-羟基缬氨酸的合成

铟参与的4-溴-1,1,1-三氟-2-丁烯与α-烷氧基醛亚胺的烯丙化反应以中等的产率和高非对映选择性生成了高烯丙基胺3.从甘油醛亚胺和4-溴-1,1,1-三氟-2-丁烯反应制备的高烯丙基胺3g出发,以7步反应24%的总产率合成了4,4,4-三氟-γ-羟基缬氨酸11.     

(R)-2-甲基-7-炔-辛酸的合成

以1,5-戊二醇为起始原料,用Evans手性助剂诱导的烷基化反应构造了C-2手性中心,用Ohira-Bestmann试剂制备了末端炔基,通过13步反应,合成了(R)-2-甲基-7-炔-辛酸,总收率为17.1%,e.e.值大于99%.     

4-对羟基苯基-2-丁酮的合成

以生物质来源的对甲氧基苯甲醛(大茴香醛)为原料,经还原反应制备得到对甲氧基苄醇,经氯代反应制备得到对甲氧基氯苄,再与乙酰乙酸乙酯经取代反应制备得到2-乙酰基-3-(4-甲氧基苯基)丙酸乙酯,再经串联的水解、脱羧反应制备得到4-(4-甲氧基苯基)-2-丁酮,最后经脱甲基反应制备得到4-对羟基苯基-2-丁酮,总收率为60.7%。具有路线简捷、易于操作、环境友好、收率高等优点。     

1,1,1-三氟-2-甲基-2-丙醇合成工艺研究

以氯甲烷(2)为原料制备甲基氯化镁格氏试剂;以三氯化镓为催化剂,甲基氯化镁与1,1,1-三氟丙酮(3)反应,经水解制得1,1,1-三氟-2-甲基-2-丙醇(1).产物结构经1 H-NMR、13 C-NMR、19 F-NMR及MS表征;通过单因素、正交实验和放大重复性实验确定了最佳反应条件:溶剂为正丁醚、格氏试剂浓度3 ...     

2-甲基-1-取代苯基-2-丙胺类化合物的简便制备方法

2-甲基-1-取代苯基-2-丙胺是合成β_2肾上腺素受体激动剂类药物的重要中间体.以取代氯化苄为原料,通过与异丁腈发生烷基化反应,所得产物经过水解,Curtius重排和钯碳催化氢化反应,合成了一系列2-甲基-1-取代苯基-2-丙胺.此方法操作简便安全,原料经济易得,产率较高,可以适用于制备多种类型的2-甲基-1-取代苯基-2-丙胺类化合物.     

5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮的合成

用1-芳酰基-5-苯基-2-硫代双脲与溴进行氧化成环反应制备了九个新的5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮, 相应的1-芳酰基-5-苯基-2-硫代双脲可以通过苯基脲与酰基异硫氰酸酯加成制得。     

N-(2-氨基苯基)-2-喹唑啉酮乙酰胺盐酸盐的合成

本文通过2-溴-N-(2-硝基苯)乙酰胺和取代的喹唑啉酮在NaH催化下发生亲核取代反应,再经过氢化、酸化合成了4个新型常山碱类抗球虫药物-N-(2-氨基苯基)-2-喹唑啉酮乙酰胺盐酸盐(1∶1)。其中,2-溴-N-(2-硝基苯)乙酰胺通过溴乙酰氯与邻硝基苯胺反应制备,取代的喹唑啉酮使用取代的邻氨基苯甲酸与甲酰胺反应合成。所有目标化合物的结构均经1H NMR,IR和HRMS等方法确证。     

合成6-甲氧基-2-萘甲醛的新方法

6-甲氧基-2-萘甲酸与硫酸二甲酯发生酯化反应制备6-甲氧基-2-萘甲酸甲酯(2);2与水合肼合成6-甲氧基-2-萘甲酰肼(3);在苯磺酰氯存在下,3发生McFadyen-Stevens还原反应得到制备萘丁美酮的中间体——6-甲氧基-2-萘甲醛,总收率43.3%。     

Synthesis of (4Z)‐4‐(Arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones by the Reaction of Ethyl (2Z)‐3‐Aryl‐2‐isothiocyanatoprop‐2‐enoates with Organolithium Compounds

A convenient one‐pot method for the preparation of (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones 2 and 3 from ethyl (2Z)‐3‐aryl‐2‐isothiocyanatoprop‐2‐enoates 1 , which can be easily prepared from ethyl 2‐azidoacetate and aromatic aldehydes, has been developed. Thus, these α‐isothiocyanato α,β‐unsaturated esters were treated with organolithium compounds, including lithium enolates of acetates, to provide 5‐substituted (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones, 2 , and 2‐[(4Z)‐(4‐arylmethylidene)‐5‐ethoxy‐2‐thioxo‐1,3‐oxazolidin‐5‐yl]acetates, 3 .     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

The Synthesis of (4E)‐N‐(4‐chlorophenyl)‐5‐substituted‐2‐diazo‐3‐oxopent‐4‐enoic Acid Amides

The (4E)‐N‐(4‐chlorophenyl)‐5‐(3‐chlorophenyl)‐2‐diazo‐3‐oxopent‐4‐enoic acid amides 5a˜j were synthesized with N‐(4‐chlorophenyl)‐2‐diazo‐3‐oxobutyramide 4 from p‐chloroaniline and various arylaldehydes. The yielded products 5a˜j were investigated with NMR, MS, IR, and X‐ray crystallographic techniques.     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

One‐Pot Synthesis of 4‐(Alkylamino)‐1‐(arylsulfonyl)‐3‐benzoyl‐1,5‐ dihydro‐5‐hydroxy‐5‐phenyl‐2H‐pyrrol‐2‐ones via a Multicomponent Reaction

An effective route to novel 4‐(alkylamino)‐1‐(arylsulfonyl)‐3‐benzoyl‐1,5‐dihydro‐5‐hydroxy‐5‐phenyl‐2H‐pyrrol‐2‐ones 10 is described (Scheme 2). This involves the reaction of an enamine, derived from the addition of a primary amine 5 to 1,4‐diphenylbut‐2‐yne‐1,4‐dione, with an arenesulfonyl isocyanate 7 . Some of these pyrrolones 10 exhibit a dynamic NMR behavior in solution because of restricted rotation around the C? N bond resulting from conjugation of the side‐chain N‐atom with the adjacent α,β‐unsaturated ketone group, and two rotamers are in equilibrium with each other in solution ( 10 ? 11 ; Scheme 3). The structures of the highly functionalized compounds 10 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS), by elemental analyses, and, in the case of 10a , by X‐ray crystallography. A plausible mechanism for the reaction is proposed (Scheme 4).     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).