Single-molecule conductance through multiple π-π-stacked benzene rings determined with direct electrode-to-benzene ring connections

Understanding electron transport across π-π-stacked systems will help to answer fundamental questions about biochemical redox processes and benefit the design of new materials and molecular devices. Herein we employed the STM break-junction technique to measure the single-molecule conductance of multiple π-π-stacked aromatic rings. We studied electron transport through up to four stacked benzene rings held together in an eclipsed fashion via a paracyclophane scaffold. We found that the strained hydrocarbons studied herein couple directly to gold electrodes during the measurements; hence, we did not require any heteroatom binding groups as electrical contacts. Density functional theory-based calculations suggest that the gold atoms of the electrodes bind to two neighboring carbon atoms of the outermost cyclophane benzene rings in η(2) fashion. Our measurements show an exponential decay of the conductance with an increasing number of stacked benzene rings, indicating a nonresonant tunneling mechanism. Furthermore, STM tip-substrate displacement data provide additional evidence that the electrodes bind to the outermost benzene rings of the π-π-stacked molecular wires.     

Carbazole‐Based Tetrapodal Anchor Groups for Gold Surfaces: Synthesis and Conductance Properties

As the field of molecular‐scale electronics matures and the prospect of devices incorporating molecular wires becomes more feasible, it is necessary to progress from the simple anchor groups used in fundamental conductance studies to more elaborate anchors designed with device stability in mind. This study presents a series of oligo(phenylene‐ethynylene) wires with one tetrapodal anchor and a phenyl or pyridyl head group. The new anchors are designed to bind strongly to gold surfaces without disrupting the conductance pathway of the wires. Conductive probe atomic force microscopy (cAFM) was used to determine the conductance of self‐assembled monolayers (SAMs) of the wires in Au–SAM–Pt and Au–SAM–graphene junctions, from which the conductance per molecule was derived. For tolane‐type wires, mean conductances per molecule of up to 10^?4.37 G₀ (Pt) and 10^?3.78 G₀ (graphene) were measured, despite limited electronic coupling to the Au electrode, demonstrating the potential of this approach. Computational studies of the surface binding geometry and transport properties rationalise and support the experimental results.     

Carbazole-Based Tetrapodal Anchor Groups for Gold Surfaces: Synthesis and Conductance Properties

As the field of molecular-scale electronics matures and the prospect of devices incorporating molecular wires becomes more feasible, it is necessary to progress from the simple anchor groups used in fundamental conductance studies to more elaborate anchors designed with device stability in mind. This study presents a series of oligo(phenylene-ethynylene) wires with one tetrapodal anchor and a phenyl or pyridyl head group. The new anchors are designed to bind strongly to gold surfaces without disrupting the conductance pathway of the wires. Conductive probe atomic force microscopy (cAFM) was used to determine the conductance of self-assembled monolayers (SAMs) of the wires in Au–SAM–Pt and Au–SAM–graphene junctions, from which the conductance per molecule was derived. For tolane-type wires, mean conductances per molecule of up to 10^−4.37 G₀ (Pt) and 10^−3.78 G₀ (graphene) were measured, despite limited electronic coupling to the Au electrode, demonstrating the potential of this approach. Computational studies of the surface binding geometry and transport properties rationalise and support the experimental results.     

Green's function formalism coupled with Gaussian broadening of discrete states for quantum transport: application to atomic and molecular wires

A Green's function formalism incorporating broadened density of states (DOS) is proposed for the calculation of electrical conductance. In cluster-molecule-cluster systems, broadened DOS of the clusters are defined as continuous DOS of electrodes and used to calculate Green's function of electrodes. This approach combined with density functional theory is applied to the electrical transmission of gold atomic wires and molecular wires consisting of benzene-1,4-dithiolate, benzene-1,4-dimethanethiolate, 4,4(')-bipyridine, hexane dithiolate, and octane dithiolate. The B3LYP, B3PW91, MPW1PW91, SVWN, and BPW91 functionals with the LANL2DZ, CEP, and SDD basis sets are employed in the calculation of conductance. The width parameter was successfully determined to reproduce the quantum unit of conductance 2e(2)/h in gold atomic wires. The combination of the B3LYP hybrid functional and the CEP-31G basis set is excellent in reproducing measured conductances of molecular wires by Tao et al. [Science 301, 1221 (2003); J. Am. Chem. Soc. 125, 16164 (2003); Nano Lett. 4, 267 (2004)].     

Chemical control of double barrier tunnelling in alpha,omega-dithiaalkane molecular wires

Single molecule conductance measurements on 1,4-bis-(6-thia-hexyl)-benzene derivatives reveal (i) that benzene rings serve as an effective indentation in the tunnelling barrier, and (ii) that more electron-rich benzene rings give higher conductances, consistent with hole conduction (i.e.via the benzene HOMO).     

Synthetic protocols and building blocks for molecular electronics

Simple and readily accessible aryl bromides are useful building blocks for thiol end-capped molecular wires. Thus, 4-bromophenyl tert-butyl sulfide and 1-bromo-4-(methoxymethyl)benzene serve as precursors for a variety of oligo(phenylenevinylene) and oligo(phenyleneethynylene) wires via efficient synthetic transformations as presented in this paper.     

Constructive Quantum Interference in Single-Molecule Benzodichalcogenophene Junctions

Heteroatom substitution into the cores of alternant, aromatic hydrocarbons containing only even-membered rings is attracting increasing interest as a method of tuning their electrical conductance. Here, the effect of heteroatom substitution into molecular cores of non-alternant hydrocarbons, containing odd-membered rings, is examined. Benzodichalcogenophene (BDC) compounds are rigid, planar π-conjugated structures, with molecular cores containing five-membered rings fused to a six-membered aryl ring. To probe the sensitivity or resilience of constructive quantum interference (CQI) in these non-bipartite molecular cores, two C₂-symmetric molecules (I and II) and one asymmetric molecule (III) were investigated. I (II) contains S (O) heteroatoms in each of the five-membered rings, while III contains an S in one five-membered ring and an O in the other. Differences in their conductances arise primarily from the longer S−C and shorter O−C bond lengths compared with the C−C bond and the associated changes in their resonance integrals. Although the conductance of III is significantly lower than the conductances of the others, CQI was found to be resilient and persist in all molecules.     

Electronic transport in Z-junction carbon nanotubes

In this paper, the electronic transport in different Z-shape carbon nanotubes containing double knee junction structures on the same tube is studied. One consists of (5,5)-(9,0)-(5,5) double knee nano-metal-metal-metal junctions and another consists (6,6)-(10,0)-(6,6) double knee nano-metal-semiconductor-metal junctions. With the nearest-neighbor pi-orbital tight-binding model, quantum conductances of these double knee junctions are calculated using the Landauer formula. The interesting conductance curves are provided to exhibit a potential application in the arena of molecular electronics.     

Zero-voltage conductance of short gold nanowires

Using the Landauer formula, the conductance of short gold wires is studied. The required electronic structure calculations are performed with a self-consistent tight-binding method. We consider gold wires of single-atom diameter with a variable number (N=1, em leader,5) of atoms. Depending on N, we find considerable conductance variations with one conductance quantum being the upper limit. The results are confirmed by means of Friedel's sum rule. Tip-shaped clusters are used to provide the contact-wire interfaces and the relation between various tip structures and the conductance is discussed. Our predictions about the conductance variations agree qualitatively with new experimental results.     

Electrical transport measurements on self-assembled organic molecular wires

The electrical properties of supermolecular assemblies of oligo(p-phenylene vinylene) were studied. These materials self-assemble into well-defined cylindrical structures in solution with lengths in the range of 100 nm-10 microm and diameters between 5 and 200 nm. Atomic force microscopy showed that by adjusting the concentration, either individual molecular wires or a dense film could be deposited. The molecular wires showed poor electrical conduction. Several tests were performed that show that it was the molecular wires themselves, not the contacts, that limit the conductivity.     

Synthesis of Alternating Donor–Acceptor Ladder‐Type Molecules and Investigation of Their Multiple Charge‐Transfer Pathways

We describe the synthesis as well as the optical and charge‐transport properties of a series of donor–acceptor (D‐A) ladder‐type heteroacenes. These molecules are stable, soluble, and contain up to 24 fused rings. Structural analyses indicated that the backbones of S 10r and Se 10r are bent in single crystals. The three 10‐ring heteroacenes were functionalized with thiol anchoring groups and used for single‐molecular conductance measurements. The highest conductance was observed for molecular wires containing a benzoselenadiazole (BSD) moiety, which exhibits the narrowest band gap. Multiple charge‐transport pathways were observed in molecular wires containing either benzothiadiazole (BTD) or BSD. The conductance is a complex function of both energy gap and orbital alignment.     

Current density analysis of electron transport through molecular wires in open quantum systems

The current density in molecular wires connected to contacts is investigated within the nonequilibrium Green's function formalism combined with the Landauer approach. Energy-dependent and total current density through a series of molecular junctions are calculated in real space representation. A rich variety of current patterns including pronounced ring currents (“vortices”) are found even in the defect-free minimal building blocks of molecular devices. The influences of contact positions, functional groups as well as atomic defects on the transport properties are examined systematically for prototypical ortho-, meta-, and para-substituted benzenes as well as heteroaromatic systems. It is found that substitutional functional groups mainly shift the molecular levels and retain characteristic transport channels, while a significant change of electronic pathways and conductance is induced by hetero-aromaticity. The current distribution is used to calculate the static magnetic field distribution in the carbon-based conductors. © 2017 Wiley Periodicals, Inc.     

DC Electrical Conductivity of Some Oligoazomethines Doped with Nanotubes

Three aromatic oligoazomethines containing seven benzene rings each were synthesized. The terminal rings were substituted with different organic groups; namely, OH, H, and NO₂. Synthesis was carried out according to the literature by condensing the para-substituted benzaldehydes with benzidine to give the three rings compound, which is then condensed with terephthaldehyde to give the respective seven benzene rings oligomer. The oligomers were used to investigate the effects of molecular structure on the electronic structure, as well as electronic and electrical properties. DC electrical conductivity variation of oligoazomethines is studied in the temperature range 300–500 K after annealing for 24 h at 100°C and after doping with 25 and 50 wt% Multi Wall Nanotubes (MWNTs). An attempt is made to relate DC electrical conductivity and electronic properties to chain length, substituted groups and coplanarity. The different groups attached to the ends showed a small effect on conductivity of the different oligomers in the following order: electron donating > neutral > electron withdrawing groups. Oligoazomethines-MWNTs gave a value of (10^?4 Scm^?1) as the highest electrical conductivity at higher temperatures. DC electrical conductivity was interpreted using the band energy model. The narrow-gap activation energies noted suggest its application in formulation of photovoltaic panels.     

Ligand effects on charge transport in platinum(II) acetylides

To investigate the electrical characteristics of organometallic complexes as molecular conductors, organometallic pi-conjugated molecules of the type trans-[PtL2(CCC6H4SAc-4)2], where L = PCy3, PBu3, PPh3, P(OEt)3, P(OPh)3, were synthesized and characterized by NMR, IR, UV, and X-ray spectroscopies. For the three complexes (L = PCy3, PPh3, and P(OEt)3) that could be measured using a cross-wire junction technique, the current-voltage (I-V) characteristics of a molecular monolayer of these complexes showed no ligand effect, despite spectroscopic evidence that electronic interaction between the phosphine ligands and the pi-system does occur. It was concluded that the tunneling efficiency across the molecule is the determining factor for conduction in this metal-molecule-metal system. It was also shown that the incorporation of a transition metal in pi-conjugated molecular wires does not adversely affect charge transport compared to all-carbon pi-conjugated molecular wires.     

Possible Routes for Efficient Thermo-Electric Energy Conversion in a Molecular Junction

In the context of designing an efficient thermoelectric energy-conversion device at nanoscale level, we suggest several important tuning parameters to enhance the performance of thermoelectric converters. We consider a simple molecular junction, which is always helpful to understand the basic mechanisms in a deeper way, where a benzene molecule is coupled to two external baths having unequal temperatures. The key component responsible for achieving better performance is associated with the asymmetric nature of transmission function, and in the present work, we show that it can be implemented in different ways by regulating the physical parameters involving the system. Employing a tight-binding framework we calculate electrical and thermal conductances, thermopower, and figure of merit (FOM) by using Landauer integrals, and thoroughly examine the critical roles played by molecule-to-lead (ML) interface geometry, magnetic field, chemical substituent group, ML coupling, and the direct coupling between the two leads. Our results show that a reasonably large FOM (≫1) can be obtained and lead to a possibility of regulating the efficiency by selectively tuning the physical parameters. We believe that the present analysis will enhance the understanding of designing efficient thermoelectric devices, and can be verified in a laboratory.     

Synthesis and Characterization of Ferrocene-terminated Ruthenium Phenylacetylide COmplexes with Alligator Clips

Ferrocene-terminated trans-Ru(dppm)2 (dppm=Ph2PCH2pph2)-containing molecular wires with alligator clips were prepared.They are suitable for self-assembly on gold electrode to investigate the influence of metal incorporation on the electron transportation property of the molecular wires.     

Effect of donor-acceptor substitution on the nonlinear optical properties of oligo(1,4-phenyleneethynylene)s studied by third harmonic generation spectroscopy

Third-harmonic generation (THG) spectroscopy was performed for oligo(1,4-phenyleneethynylene)s (OPEs) with terminal donor-acceptor (DA) substitution and compared to the results of merely donor substituted OPEs and regular OPE chains with 2,5-dipropoxy benzene rings. Both, extension of the conjugation and push-pull effect enhance the molecular hyperpolarizability gamma, even for the DAOPEs, which exhibit a hypsochromic shift of the long-wavelength absorption for increasing length L of the conjugated chain.     

Novel electron-deficient oligo(phenyleneethynylene) derivatives for molecular electronics

This work reports synthesis and characterizations of two new electron-poor “oligo(phenyleneethynylene) (OPE) type” molecular wires for fundamental studies of electron transport in molecular junctions. These OPE derivatives display three aromatic rings functionalized (i) with NO₂ (OPN) or fluorine (OPF) groups on the central aryl core and (ii) with the requisite protected thiolate anchoring groups on the lateral rings at both ends. We show that the moderately effective Sonogashira couplings can give access to such rare electrodeficient molecules but are unfortunately associated with significant side reactions. We detail the choice of adequate reaction conditions to allow the recovery of suitable amounts of compounds bearing several strongly electron-withdrawing substituents on their central ring for further study of the physical properties.     

Theoretical investigation on the transportation behavior of molecular wires with redox reaction

A series of model molecules [sequential quinone (Q) or hydroquinone (HQ) rings connected by triple bonds] as molecular wires have been investigated by using density functional theory combined with nonequilibrium Green's function method. The results show that the system has two discrete conductance states: a low-conductance state with Q form, and a high-conductance state with HQ form. The systematic investigations have suggested that more Q/HQ pairs in the system may improve the on/off ratio, though long molecule reduces the conductance of the molecular junction. The switch mechanism has been explained via molecular electronic structure as well as transmission spectra.     

Electrical conductance of conjugated oligomers at the single molecule level

We determine and compare, at the single molecule level and under identical environmental conditions, the electrical conductance of four conjugated phenylene oligomers comprising terminal sulfur anchor groups with simple structural and conjugation variations. The comparison shows that the conductance of oligo(phenylene vinylene) (OPV) is slightly higher than that of oligo(phenylene ethynylene) (OPE). We find that solubilizing side groups do neither prevent the molecules from being anchored within a break junction nor noticeably influence the conductance value.