Synthesis and characteristics of the poly(carboxybetaine)s and the corresponding cationic polymers

Two types of carboxybetaines and their corresponding cationic monomers and polymers are synthesized in this study. Comparing the chemical shifts of the methylene groups in the cationic monomers and carboxybetaines in both ¹H- and ¹³C-NMR spectra reveal that the respective methylene groups are clearly distinguished from their chemical shifts in ¹H- and ¹³C-NMR spectra. The solubilities, moisture regain properties, and solution properties of the poly(carboxybetaine)s and cationic polymers are investigated in relation to their molecular structures. Because the cationic polymers were ionized in an aqueous solution, the cationic polymers were more soluble than the poly(carboxybetaine). For the various functional groups of poly(carboxybetaine)s and cationic polymers, the order of tendency for moisture regain is  COO >  CONH . Results obtained from the reduced viscosity for cationic poly(TMMPAMS) are reversed from that for zwitterionic poly(DMAEAPL). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3527–3536, 1997     

Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials

Development of high‐performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid‐cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium‐substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0–2.3 cm² V^?1 s^?1 in doping‐states for polymers, PDPPSe‐12 exhibits a maximum power factor and ZT of up to 364 μW m^?1 K^?2 and 0.25, respectively. The performance is more than twice that of the sulfur‐based DPP derivative and represents the highest value for p‐type organic thermoelectric materials based on high‐mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state‐of‐the‐art performances.     

Polysiloxane dizwitterionomers. III. Water sorption

The interaction of water with the various polysiloxane dizwitterionomers and the model compound 4,7-diazaheptyl-4,7-di(3-propane-sulfonate) heptamethyltrisiloxane was studied. The model compound is soluble in water but the polymers swell inhomogeneously when soaked in water. The initial sorption kinetics of these zwitterionomers indicate similar mechanisms of water uptake which is independent of ion concentration (D = 4.7 × 10^?7 cm²/sec). The sorption isotherms reveal the high sorptive capacity of these ionomers. Furthermore, the linear relationship between the water uptake and the concentration of ions over a large relative humidity range (0.22 ≤ P/P₀ ≤ 0.93) allowed us to treat each phase separately. It has been found that most of the absorbed water molecules are immobilized in the ionic domains. Their concentration in this phase is nearly identical to the sorptive capacity of the model compound.     

Synthesis and characterization of azobenzene-containing side-chain photorefractive polymers

The synthesis and characterization of some new high-T_g photorefractive polymers, polyphosphazene P3-P8, were described. They were obtained via a post-azo coupling reaction. The resulting materials have been characterized by means of ¹H NMR, ³¹P NMR, FT-IR, UV-vis, GPC and DSC. Chromophore contents up to 14 mol% have been realized. The polymers had high glass transition temperatures and good optical transparency. Measurements reveal that they possess relatively large magnitude of photoinduced birefringence.     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Solution properties of dendronized poly(hydroxy ethyl methacrylate) polymers

Four generations of dendronized polymers with a methacrylate backbone and hydroxy‐functionalized aliphatic polyester dendrons based on 2,2‐bis(methylol)propionic acid were studied in solutions by rheological measurements, dynamic light scattering, turbidimetry, and ¹H NMR self‐diffusion measurements to reveal the effect of increasing hydrophilicity and molecular size on their solution properties. The studied polymers were interesting new amphiphiles with a hydrophobic main chain and a hydrophilic shell. Evidence of aggregation upon the heating of the first‐generation polymer in an aqueous solution was obtained by dynamic light scattering and turbidimetry, reflecting the effect of the hydrophobic polymer backbone, whereas the higher generation polymers did not show aggregation upon heating. Although the dimensions of the polymers were observed to increase with increasing generation, all the polymers exhibited low viscosities and Newtonian flow behavior in both aqueous and dimethyl sulfoxide solutions. The relative viscosities of the polymers in water and dimethyl sulfoxide showed that the conformation of the polymers was somewhat more open in dimethyl sulfoxide, and this led to higher viscosities than those in water, in agreement with the ¹H NMR diffusion measurements, by which the dimensions were found to be larger for the polymers dissolved in dimethyl sulfoxide. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3674–3683, 2006     

Nitroxide-mediated styrene polymerization initiated by an oxoaminium chloride

An oxoaminium chloride that is prepared by reacting 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) with chlorine in carbon tetrachloride initiates radical polymerization of styrene at 120°C. In the early stages of polymerization, a monomeric adduct, 2,2,6,6-tetramethyl-1-(2-chloro-1-phenylethoxy)piperidine, is formed. Thereafter, styrene polymerization exhibiting the characteristics of living polymerization proceeds. High molecular weight polymers with relatively narrow molecular weight distributions are obtained by this polymerization. ¹H-NMR spectra of the polymers reveal that a chlorine atom and a TEMPO group are present at the α- and ω-termini, respectively. The monomeric adduct was prepared by heating the oxoaminium chloride and styrene in carbon tetrachloride at 65–70°C, and was characterized by ¹H- and ¹³C-NMR spectroscopy. It was found to be suitable as an initiator for nitroxide-mediated radical polymerization of styrene to make polymers with chlorine on the chain end. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2555–2561, 1998     

Functional monomers and polymers. CXXI. Methylation and interaction studies on adenine containing polymethacrylate derivatives

Studies of the methylation of polymethacrylate derivatives with adenine bases were made in comparison to those with uracil bases. The polymethacrylate derivatives with adenine bases were methylated by using methyl iodide in dimethyl sulfoxide solution to produce polymers that contained N¹-methyladenine and N¹, N⁶-dimethyladenine units. The products were identified by spectroscopic data and by preparing their model compounds. The methylated polymers obtained were further applied in a study of polymer complex formation with uracil-base polymers.     

Bipyridinium Polymers That Dock Tetrathiafulvalene Guests in Water Driven by Donor–Acceptor and Ion Pair Interactions

Two water‐soluble para‐xylylene‐connected 4,4′‐bipyridinium (BIPY²⁺) polymers have been prepared. UV‐Vis absorption, ¹H NMR spectroscopy, and cyclic voltammetry experiments support that in water the BIPY²⁺ units in the polymers form stable 1:1 charge‐transfer complexes with tetrathiafulvalene (TTF) guests that bear two or four carboxylate groups. These charge‐transfer complexes are stabilized by the donor–acceptor interaction between electron‐rich TTF and electron‐deficient BIPY²⁺ units and electrostatic attraction between the dicationic BIPY²⁺ units and the anionic carboxylate groups attached to the TTF core. On the basis of UV‐Vis experiments, a lower limit to the apparent association constant of the TTF?BIPY²⁺ complexes of the mixtures, 1.8×10⁶ m ^?1, has been estimated in water. Control experiments reveal substantially reduced binding ability of the neutral TTF di‐ and tetracarboxylic acids to the BIPY²⁺ molecules and polymers. Moreover, the stability of the charge‐transfer complexes formed by the BIPY²⁺ units of the polymers are considerably higher than that of the complexes formed between two monomeric BIPY²⁺ controls and the dicarboxylate‐TTF donor; this has been attributed to the mutually strengthened electron‐deficient nature of the BIPY²⁺ units of the polymers due to the electron‐withdrawing effect of the BIPY²⁺ units.     

Direct synthesis of polyaromatic chains of tribenzopentaphene copolymers through cyclodehydrogenation of their poly‐tetraphenylbenzene precursors

Three polyaromatic‐based polymers are reported to contain co‐monomers of trapezoidal tribenzopentaphene (TBP) polycyclic aromatic hydrocarbons. The synthetic strategy consists of initially making highly soluble tetraphenylbenzene copolymers 4a–c , followed by a cyclodehydrogenation/aromatization reaction to obtain target polymers 5a–c . The polymers were characterized by gel permeation chromatography, FT‐IR, UV‐vis, emission, ¹H‐, and ¹³C‐nuclear magnetic resonance spectroscopy. The target polymers 5a–c reveal emission spectra in the range of 430–480 nm; thus, qualifying them to act as blue emitters. Investigation of the polymers optical properties and their correlation with density functional theory calculations suggest a distorted TBP core from planarity caused by the introduction of a dodecyl group at its wide edge. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3565–3572     

1,2-Dinitrile polymers. I. Hompolymers and copolymers of fumaronitrile,maleonitrile, and succinonitrile

Homopolymers and copolymers of fumaronitrile, maleonitrile, and succinonitrile have been prepared by using medium high temperature free-radical initiators. Black, nonfusible but soluble polymers were obtained. The spectroscopic and chemical evidence indicated a structure containing α-pyrrolenine rings and no free nitrile groups in the fumaronitrile and maleonitrile polymers and 1-pyrroline rings and free nitrile groups in the succinonitrile polymers. The polymers possessed good thermal stability, free spin concentration of 10¹⁷–10¹⁸ spins/g, and an ac conductivity at room temperature in nitrogen of 10^?6 to 10^?8 ohm^?1 cm^?1.     

Molecular mechanics investigation of some acrylic polymers using SPASIBA force field

The First generation SPASIBA force field is used to study normal vibrational modes of PMMA, and then extended to other thermoplastic polymers, namely PMA, PMAA and PAA, in order to determine its parameters transferability. To this end, FTIR and FTR spectra of pure PMMA samples, prepared by the emulsion polymerization of MMA and initiated by sodium, are recorded in 400–3500 cm⁻¹ and 200–3500 cm⁻¹, respectively. A detailed vibrational analysis was performed on the obtained spectra and the observed frequencies are assigned to their respective vibrational modes, supported by potential energy distribution (PED) analysis. Our numerical results reveal an RMS value of 7.8 cm⁻¹ corresponding to IR wavenumbers and 8.7 cm⁻¹ relatively to Raman wavenumbers. Our vibrational calculations on PMA, PMAA and PAA polymers reveal that the parameters transferability criterion, established by Shimanouchi, is verified for the SPASIBA force field.     

Thermotropic liquid crystalline polymers. II. Polymers with amino acid fragments in the side chains

The comblike polymers, poly(N^ε-methacryloyl-N^α-acyl) derivatives of L -lysine, which contain amino acid fragments and long sequences of methylene groups in the side chain, were synthesized. This article, which is based on x-ray data, differential thermal analysis, and optical microscopy, describes the structure of these polymers and their properties. It also shows that the combination of anisodiametric side groups with a “rigid” matrix of main chains leads to a liquid crystalline structure of examined polymers.     

Photocrosslinkable vinylamine copolymers. I. Synthesis and photosensitivity of cinnamoylated polyvinylamine

Vinylamine copolymers prepared by the Hofmann reaction were functionalized by amidification with cinnamoyl chloride. The resulting photosensitive polymers, which are the nitrogen analogues of poly(vinylcinnamate), can be prepared with various contents of cinnamamide side groups. The polymers exhibit a marked hydrophilicity and undergo efficient crosslinking upon exposure to 250–300 nm UV light. The sensitivity S expressed in cm²·J⁻¹ was shown to be higher for a given content, τ, in cinnamamide groups expressed in mol·g⁻¹ when the residual vinyl amine units are in the ammonium form. The dependence of S upon τ was of the second order for the free base form of the photopolymers, but a higher order with S approximately proportional to τ³ for the hydrochloride form of the photosensitive polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2513–2520, 1997     

15N-NMR spectroscopy. III. Neighboring residue effects in sequence polymers containing glycylglycine units

The tripeptides Phe-Gly-Gly, β-Ala-Gly-Gly, and ?-Aca-Gly-Gly as well as the peptide derivatives δ-isothiocyanatovaleroyl-Gly-Gly and ?-isothiocyanatocaproyl-Gly-Gly were synthesized by using known methods so that the peptide nitrogen between the two glycyl residues was isotopically enriched in ¹⁵N to a level of 0.8–0.9%. These monomer units were then used to produce the sequence polymers (Phe-Gly-Gly)_n, (β-Ala-Gly-Gly)_n, (δ-Ava-Gly-Gly)_n, and (?-Aca-Gly-Gly)_n. The 18.24 MHz ¹⁵N-NMR spectra of the oligo- and polypeptides were obtained by using trifluoroacetic acid as solvent, since the solutions have relatively low viscosity and exhibit a strong negative nuclear Overhauser enhancement of the ¹⁵N signals. For comparison, ¹⁵N-NMR spectra of the homopolymers (Gly)_n, (β-Ala)_n, (γ-Abu)_n, (δ-Ava)_n, and (?-Aca)_n were also recorded. The ¹⁵N signals from the ω-aminoacyl residues in the sequence polymers appear up to 11 ppm upfield of the signals observed for the homopolyamides. The ¹⁵N signals from the two glycyl residues are separated by 3–7 ppm. Comparison with the ¹³C-NMR spectra of the same polymers indicates that ¹⁵N-NMR is better suited for the characterization and sequence analysis of these types of polymers.     

Structure-property relationships for novel wholly aromatic polyamide-hydrazides containing various proportions of para-phenylene and meta-phenylene units: I. Synthesis and characterization

A series of novel wholly aromatic polyamide-hydrazides was synthesized by a low temperature solution polycondensation reaction of either 4-amino-3-hydroxybenzhydrazide or 3-amino-4-hydroxybenzhydrazide with an equimolar amount of either terephthaloyl chloride (TCl), isophthaloyl chloride (ICl), or mixtures of various molar ratios of TCl and ICl in anhydrous N,N-dimethylacetamide (DMAc) as a solvent. Polymer structures were identified by elemental analysis and infrared spectroscopy. All the polymers have the same structural formula except the way of linking phenylene units inside the polymer chain. The content of para- and meta-phenylene moieties was varied within this series so that the changes in the latter were 10 mol % from polymer to polymer, starting from an overall content of 0-100 mol %. The prepared polymers were characterized for their properties in order to acquire clear understanding of the influence exerted by controlled structural variations in these polymers upon some of important properties, such as solubility, intrinsic viscosity, moisture regain, mechanical properties and thermal as well as thermo-oxidative stability. The polymers were readily soluble in several organic polar solvents such as DMAc, N,N-dimethylformamide, dimethyl sulphoxide, N-methyl-2-pyrrolidone and hexamethyl phosphoramide and could be cast into flexible films. Their solubilities were found to increase remarkably with introduction of meta-phenylene moieties into the polymer chains. Their intrinsic viscosities ranged from 0.73 to 4.83 dl g⁻¹ in DMAc at 30 °C and increased with the increase of para-phenylene units content. Mechanical properties of the films produced from these polymers are improved markedly by substitution of para-phenylene units for meta-phenylene units. Thermogravimetric studies revealed that the completely para-oriented type of polymer has better thermal and thermo-oxidative stability relative to that of the other polymers. Moreover, the results reveal that the prepared polymers have a great affinity to water sorption. The hydrophilic character increases as a function of meta-oriented phenylene rings incorporated into the polymer chains.     

13C-Nuclear Magnetic Resonance Analysis of Some Essentially Random Copolymers of Methyl Methacrylate and Butadiene

20 MHz ¹³C-NMR (nuclear magnetic resonance) spectroscopy has been used to determine the relative concentrations of certain methacrylate and butadiene containing monomer sequence fractions in some essentially random free-radical copolymers of methyl methacrylate and butadiene. Several of the results are in good agreement with those obtained in an earlier ¹H-NMR study and confirm, within experimental error, that the copolymeriza-tion obeys first-order Markov statistics. The patterns of olefinic carbon resonances reveal that the progressive introduction of methacrylate units into the polymers slightly increases the trans-1,4- to cis-1,4 ratios of the butadiene units relative to that found for a pure polybutadiene prepared under similar conditions.     

New optical limiting polymeric materials with different π-electron conjugation bridge structures: Synthesis and characterization

In this communication we describe the design and synthesis of five new conjugated polymers (P1–P5) with various π-electron conjugation bridges. Their structures were established by FTIR, ¹H NMR spectroscopy, elemental analysis. The molecular weights of the polymers were estimated by gel permeation chromatographic technique. Further, their electrochemical, linear and nonlinear optical properties were investigated. The electrochemical band gaps of P1–P5 were found to be 1.72–2.35 eV. Their third-order nonlinear optical activities were studied by open aperture Z-scan technique, using a Q-switched, frequency doubled Nd:YAG laser producing 7 nano second laser pulses at 532 nm. Z-scan results reveal that the polymers exhibit self-defocusing nonlinearity and their operating mechanism involves reverse saturable absorption. The polymers showed strong optical limiting behavior due to effective two-photon absorption (2PA) with 2PA coefficients of the order of 10^?11 m/W, which is comparable to that of good optical limiting materials in the literature.     

Luminescent lanthanide-containing chiral liquid crystalline polymers in the side chain

Luminescent lanthanide-containing chiral liquid crystalline polymers are graft-copolymerised using poly(methylhydrogeno)siloxane (PMHS), crosslinking agent, liquid crystalline monomer and lanthanide complexes. The chemical structures of the monomers are characterised by FTIR, ^1?H NMR and elemental analyses. The mesomorphic properties and phase behaviour are investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy and X-ray diffraction. The polymers containing less than 9 mol% of the crosslinking units reveal reversible mesomorphic phase transition, wide mesophase temperature ranges and high thermal stability. With the introduction of lanthanide complex units, the polymers are enabled with the significant luminescent properties. The temperature dependence of fluorescence intensity was studied in the liquid crystalline phase. The IR imaging shows that the lanthanide complex units evenly distribute in polymers.     

Polymerization of Si-containing acetylenes. XIV. Polymerization of diphenylacetylenes with bulky silyl groups and polymer properties

Polymerization and polymer properties of diphenylacetylenes with bulky silyl groups (SiMe₂–i-Pr, SiMe₂–t-Bu, SiMe₂Ph, SiEt₃) at para or meta position were studied under comparison with those of the SiMe₃ derivatives. The present monomers polymerized in good yields with TaCl₅-cocatalysts to form high molecular-weight polymers (M _w > 4 × 10⁵). The polymer yields of para-substituted monomers were similar to that of the SiMe₃ derivative, while those of meta substituted monomers were lower than that of m-SiMe₃ derivative. Most of the polymers were totally soluble in common solvents such as toluene and CHCl₃, although the polymers with p-SiMe₂–t-Bu and p-SiMe₂Ph groups were partly insoluble in all solvents. These polymers resembled SiMe₃-containing homologues in the UV-visible absorption and thermal stability. The oxygen permeability coefficients of these polymers were in the range of 10^?9?10^?8 cm³ (STP) cm/(cm²·s cm Hg)—lower than those of the corresponding SiMe₃-containing polymers. © 1993 John Wiley & Sons, Inc.