Polymerization of styrene oxide by nitronium tetrafluoroborate

The polymerization of styrene oxide by nitronium tetrafluoroborate in nitromethane and methylene chloride at 5, 20, and 50°C is investigated. GPC analyses of the products combined with isocyanate method show that both cyclic and linear oligomers are formed. In CH₃NO₂ the cyclic dimer and trimer are 2-benzyl-4-phenyl-1,3-dioxolane and 1,3,5-tribenzyl-trioxane, respectively. In CH₂Cl₂ 2,5-diphenyldioxane is isolated. In nitromethane, mainly isomerized structures with acetal linkage are produced, while in methylene chloride isomerization does not proceed. By NMR and IR spectra the presence of C?O and OH end groups in the linear oligomers is shown. There are indications that oligomers are formed both directly from the monomer and by degradation of the polymer.     

Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

Isomerization polymerization of β-propiolactones carrying side-chain ester groups

Based on our recent discovery of the isomerization polymerization of β-(2-acetoxyethyl)-β-propiolactone into poly-δ-ester,^1,2 we examined the generality of this phenomenon by using two related monomers. The catalysts were (EtAlO)_n and Et(ZnO)₂ZnEt. The side-chains in the monomers selected were the (CH₃)₂CHCOO? CH₂CH₂? (2) and (CH₃)CICHCOO? CH₂CH₂? (3) groups in which steric effects are almost identical but electronic effects are in opposition. The monomers yielded isomerized poly-δ-ester units, depending on the terminal substituent groups in the side-chain. These observations can be interpreted with the bicyclic intermediate proposed in the earlier work. Monomer (2) was reactive and produced a poly-δ-ester structure most readily, probably because of the higher electron density at the side-chain ester group which coordinated with the catalyst. In contrast, monomer (3) was less reactive, and the probability of isomerization was the lowest, i.e., the electron deficient side-chain ester group apparently interfered with the formation of the intermediate, especially in the Zn-catalysis. Equibinary random copolymers were prepared from (2) and (3) according to the catalyst and polymerization conditions chosen.     

Anionic Oligomerization of Methyl Methacrylate by Alkali Metal Alkoxides

Abstract

The kinetics of the oligomerization of methyl methacrylate (MMA) by methoxide/methanol solutions was studied using gas chromatography techniques. The effects of the type of the alkali metal, [CH OH]/[monomer] ratio, solvent, and initiator concentration were investigated. The rate of conversion using different alkali metal alkoxides was in the order CH₃OLi < CH₃ONa < CH₃OK, but no oligomers higher than the addition product, RO—MMA (n=1), could be obtained by CH₃OLL DP_n decreased with increasing the [CH₃OH]/[monomer] ratio and with lowering of the initiator concentration. Using DMSO as solvent increased the yields of the higher oligomers. The formation of n=1 was reversible, contrary to the formation of the higher oligomers. Some of the rate constants of the various steps of the oligomerization were estimated by taking into account the reversibility of the initiation reaction and assuming steady-state conditions in the concentration of the various anions present in the system.     

反式2-甲基-2-丁烯酸甲酯与臭氧反应机理的计算研究

采用G3B3方法构建反式2-甲基-2-丁烯酸甲酯与O3反应体系以及后续Criegee自由基有、无水分子参与下异构化反应的势能面剖面.结果表明,反式2-甲基-2-丁烯酸甲酯与O3反应首先生成一个稳定的五元环中间体,此中间体按断键位置不同后续裂解反应存在两条路径,分别生成产物P1(CH3CHOO+CH3OC(O)C(CH3)O)和P2(CH3CHO+CH3OC(O)C(CH3)OO).利用经典过渡态理论(TST)并结合Wigner矫正模型计算了200-1200 K温度区间内标题反应的速率常数kTST/W.计算结果显示,294 K时,该反应速率常数为7.55×10-18cm3molecule-1s-1,与Bernard等对类似反应所测实验值非常接近.生成的Criegee自由基(CH3CHOO和CH3OC(O)C(CH3)OO)可分别与水分子发生α-加成及β-氢迁移反应,其中Criegee自由基与水的α-加成反应较其与水的β-氢迁移反应具有优势.另外与无水分子参与CH3CHOO和CH3OC(O)C(CH3)OO异构化反应相比,水分子的参与使得异构化反应较为容易进行.     

Rationalizing chain microstructure in the polyα-olefins synthesized by cationic AlCl3/H2O catalytic system

In this study, three middle range α-olefin monomers including 1-hexene, 1-octene, and 1-decene were oligomerized using conventional AlCl₃/H₂O catalytic system. Molecular weight and microstructure of the oligomers were analyzed by GPC and ¹HNMR, respectively. By ¹HNMR spectra, both internal (CHR=CHR′ and CHR=CR′R′′) and external (CH₂=CR′R′′) olefins containing di and tri-substituted C=C bonds were detected. After successful oligomerization, synthesized polyα-olefins underwent hydrogenation process using Pd(0)-Hal catalyst to yield synthetic oils of PHex, POct, and PDec, respectively and then completion of the hydrogenation was confirmed by ¹HNMR spectroscopy. The microstructure of the synthesized oligomers was rationalized using the ratio under the peak of CH?+?CH₂/CH₃ hydrogens (S1/S2) in ¹HNMR spectra and the degree of oligomerization obtained from M_n. According to the results, the best match between theoretical and real S1/S2 is obtained when considering double bond isomerization in the synthesized PAOs. By knowing PAO molecular weight, a relationship between monomer type and S1/S2 in the PAO homopolymers was detected. Our suggested methodology can be generalized to the unknown PAO homopolymers to unravel their monomer type by simple ¹HNMR and GPC analyses.     

Reductive cyclization of polychloroalkanes involving two dichloromethylene groups

Conclusions The reductive cyclization of CH₃CCl₂CH₂CCl₂CH₃ proceeds as 1,3-dechlorination to give 1,2-dichloro-1,2-dimethyl- and 1-chloro-1,2-dimethylcyclopropanes. It was postulated that the formation of the esters CH₂=C(CH₃)CH(CH₃)OC₂H₅ and CH₃CH=C(CH₃)CH₂OC₂H₅ as the main reaction products is due to isomerization with opening of the chloro-substituted cyclopropane ring and subsequent solvolysis of the isomerization product.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1854–1856, August. 1980.     

Studies on vinyl isocyanides

The vinyl Isocyanides 2,4,6-(CH₃)₃C₆H₂CHCHNC and (CH₃)₃CCHCHNC and the new 1,3-dienyl isocyanide CH₃CHCH(CH₃)-CHCHNC have been prepared from the corresponding aldehydes and methyl isocyanide using a method first developed by Schöllkopf, Stafforst, and Jentsch. ⁵ The new vinyl isocyanides (CH₃)₂CCHNC and CH₃CHC(CH₃)NC have been prepared by the Cu₂O-catalyzed isomerization of the corresponding allyl isocyanides The liquid vinyl isocyanides may be characterized by the formation of solid cis-(RNC)₂Mo(CO)₄ derivatives through reaction with norbornadienetetracarbonylmolybdenum in hexane solution at ambient temperature. Examination of these molybdenum carbonyl complexes by proton and carbon-13 NMR spectroscopy Indicates that the isocyanide carbon atom but not the carbon-carbon double bond of the vinyl 1socyanide ligands is bonded to the molybdenum atom. The proton-decoupled carbon-13 NMR spectra of the vinyl isocyanides, but not their molybdenum carbonyl complexes, indicate coupling of the isocyanide nitrogen to both the isocyanide carbon (¹J(C-N)6 Hz. ) and the vinyl carbon bearing the isocyanide group (¹J(C-N)11-13 Hz. ) leading to 1:1:1 triplets for these resonances. These vinyl carbonyl resonances are used to estimate the cis-trans isomer ratios in vinyl isocyanides of the type RCHCHNC. Such studies suggest that the formation of vinyl isocyanides by the copper(I) catalyzed isomerization of the corresponding allylic isocyanides is more nearly stereospecific than the formation of vinyl isocyanides by the elimination reaction of the Schollkopf/Stafforst/Jentsch synthetic method.     

Oligomerization of ethylene to branched alkenes using neutral phosphinosulfonamide nickel(II) complexes

A series of neutral phosphinosulfonamide complexes of nickel(II) were synthesized that catalyzed the oligomerization of ethylene to branched oligomers with average degrees of polymerization between 10 and 35. Branching numbers varied from 17 to 80 branches per 1000 carbons, depending on the catalyst structure and reaction conditions. The catalysts were active in a variety of solvents, including toluene, CH₂Cl₂, tetrahydrofuran, ethyl acetate, and methanol, but showed decreasing activity at temperatures higher than 40 °C. Electron‐rich phosphinosulfonamides produced the highest catalyst activities in a series of structure–reactivity studies. The mechanism of oligomer formation was investigated with ¹H NMR spectroscopy, which indicated that branching arose from the isomerization of the nickel alkyl species during propagation rather than the reincorporation of α‐olefin products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4627–4640, 2000     

RN (R＝CH3, CH3CH2)异构化及脱氢反应的量子拓扑研究

利用量子化学从头算CASSCF方法在6-311＋G (d, p)基组水平上对单线态和三线态RN (R＝CH₃, CH₃CH₂)异构化反应及RN脱氢反应的微观机理进行了理论研究. 在MP2/6-311＋G (d, p)和CCSD/6-311＋G (d, p)水平上进行了单点能校正. 单态和三态势能面的交叉点(ISC)的存在清楚地说明了基态反应物³RN异构化为基态产物¹R'NH (R'＝CH₂, CH₃CH)的过程. 电子密度拓扑分析显示在整个异构化过程中有两种类型的结构过渡态: 单态反应通道为T型过渡态, 三态反应通道为环状过渡态. 单线态RN脱氢反应通道中“原子-分子键”的存在说明两个H原子是以H₂的形式从RN中脱去的.     

Tetravalent Oxygen and Sulphur Centres Mediated by Carborane Superacid: Theoretical Analysis

The tetravalent oxygen or sulphur centres, especially in H₄O²⁺ and H₄S²⁺ dications, were analysed experimentally and theoretically in various studies. Herein, we discuss stabilities of such centres in related H(CH₃)₃O²⁺ and H(CH₃)₃S²⁺ dications mediated by carborane superacid. The ωB97X-D/6-311++G(d,p) calculations were performed for a gas phase and for different solvents characterized by a wide range of dielectric constants for complexes of these dications with the conjugated base of H(CHB₁₁F₁₁) carborane superacid, CHB₁₁F₁₁⁻, which indicate that these complexes are linked by hydrogen bonds. The Quantum Theory of ‘Atoms in Molecules’ (QTAIM) approach is applied to characterize these interactions. DFT results show that tetravalent oxygen and sulphur structures are additionally stabilized by polar solvents.     

Synthesis and some properties of silanes and siloxanes with 5,5,6,6,7,7,7-heptafluoro-4,4-bis(trifluoromethyl)heptyl substituents

Methods for syntheses of new polyfluorinated compounds, viz., silanes containing substituents CF₃CF₂CF₂C(CF₃)₂(CH₂)₃ (R^F) at the silicon atom and 1,3,5-tris(R^F)-1,3,5-trimethylcyclotrisiloxane that can be used for the synthesis of fluorocontaining oligo- and polysiloxanes of different structure, were developed. The polymerization of cyclotrisiloxane in the presence of 1,3-divinyltetramethyldisiloxane gave linear oligomers, whose chain contain -(R^F)Si(Me)O- units.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2133–2136, October, 2004.     

A Study of the Cis-Trans Isomerization of a Square Planar pt Ylide Complex

The isomerization of cis-Pt(PPh₃)₂(I)(CH₂P(O)(OCH₃)₂), 1 , was studied by an NMR technique. An Arrhenius plot for the isomerization gives an activation energy of 99.2 KJ/mol, ΔH^≠ = 97 KJ/mol and ΔS^≠ = ?8.3 J/mol-K. Under a CO atmosphere the cis isomer catalytically isomerized to its trans form. Free PPh₃ did not catalyze the cis-trans isomerization. In the proposed isomerization mechanism the reaction goes through an intramolecular assisted phosphine dissociation, followed by dimer formation. The addition of phosphine to the dimer then completes the isomerization of the original monomer from cis to trans.     

Silicon‐terminated telechelic oligomers by ADMET chemistry: Synthesis and copolymerization

Methoxydimethylsilane and chlorodimethylsilane‐terminated telechelic polyoctenomer oligomers (POCT) have been prepared by acyclic diene metathesis (ADMET) chemistry using Grubbs' ruthenium Ru(Cl₂)(CHPh)(PCy₃)₂ [Ru] or Schrock's molybdenum Mo(CH CMe₂Ph)(N 2,6 C₆H₃ i Pr₂)(OCMe(CF₃)₂)₂ [Mo] catalysts. These macromolecules have been characterized by FTIR, ¹H‐, ¹³C‐, and ²⁹Si‐NMR spectroscopy. The molecular weight distributions of these polymers have been determined by GPC and vapor pressure osmometry (VPO). The number‐average molecular weight (M_n) values of the telechelomers are dictated by the initial ratio of the monomer to the chain limiter. The termini of these oligomers (M_n = 2000) can undergo a condensation reaction with hydroxy‐terminated poly(dimethylsiloxane) (PDMS) macromonomer (M_n = 3300) [HO Si(CH₃)₂ O { Si(CH₃)₂O }_x  Si(CH₃)₃], producing an ABA‐type block copolymer, as follows: (CH₃)₃SiO [ Si(CH₃)₂O ]_x [ CHCH (CH₂)₆ ]_y [ OSi(CH₃)₂ ]_x OSi(CH₃)₃. The block copolymers were characterized by ¹H‐ and ¹³C‐NMR spectroscopy, VPO, and GPC, as well as elemental analysis, and were determined by VPO to have a M_n of 8600. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 849–856, 1999     

Characterization of synthetic and commercial trisiloxane surfactant materials

The organosilicone surfactant Silwet L‐77^® (L‐77), used as an agrochemical adjuvant, is a mixture comprised predominantly of [(CH₃)₃SiO]₂? (CH₃)Si? (CH₂)₃? (OCH₂CH₂)_n? OCH₃ oligomers (n = 3–16, average n ≈ 7.5). The commercially available L‐77 mixture was purified by reversed‐phase high‐performance liquid chromatography (HPLC) to obtain individual trisiloxane surfactant components. Pure oligomers (n = 3, 6 and 9) were also synthesized. Synthesis was achieved by hydrosilylation of monomeric ethoxylate monomethyl ether starting reagents. Pure hexa‐ and nona‐ethylene glycols were produced by condensation of smaller oligomers. Atmospheric‐pressure ionization mass spectrometry (MS) methods were used to characterize fully the commercial L‐77 product and synthesized or isolated components. The application of Fourier‐transform ion cyclotron resonance MS and online HPLC–electrospray ionization MS techniques to the analysis of this surfactant are described here. The application of these analytical techniques also enabled elucidation of the synthetic by‐products present in the commercial formulation. In addition, physico‐chemical properties specific to agrochemical uses, such as droplet spread areas on plant foliage and surface tension for the different oligomer solutions, are also reported. Copyright © 2004 John Wiley & Sons, Ltd.     

A Lead Iodide Perovskite Based on a Large Organic Cation for Solar Cell Applications

Methylammonium (CH₃NH₃⁺) and formamidinium ((NH₂)₂CH⁺) based lead iodide perovskites are currently the two commonly used organic–inorganic lead iodide perovskites. There are still no alternative organic cations that can produce perovskites with band gaps spanning the visible spectrum (that is, <1.7 eV) for solar cell applications. Now, a new perovskite using large propane‐1,3‐diammonium cation (1,3‐Pr(NH₃)₂²⁺) with a chemical structure of (1,3‐Pr(NH₃)₂)_0.5PbI₃ is demonstrated. X‐ray diffraction (XRD) shows that the new perovskite exhibits a three‐dimensional tetragonal phase. The band gap of the new perovskite is about 1.6 eV, which is desirable for photovoltaic applications. A (1,3‐Pr(NH₃)₂)_0.5PbI₃ perovskite solar cell (PSC) yields a power conversion efficiency (PCE) of 5.1 %. More importantly, this perovskite is composed of a large hydrophobic cation that provides better moisture resistance compared to CH₃NH₃PbI₃ perovskite.     

ESR study of the photo-induced decomposition of polypropylene in the presence of N,N,N′,N′-tetramethyl-p-phenylenediamine

The mechanism of uv (λ > 325 nm) photodegradation of polypropylene (PP) containing N,N,N′,N′-tetramethyl-p-phenylenediamine (T₄MPD) has been investigated by means of ESR spectroscopy. The observed spectra after uv irradiation of both isotactic-PP (IPP) and stereoblock-PP (SPP) samples in vacuum at 77 K consisted principally of a broad singlet which was assigned to a T₄MPD cation radical (T₄MPD^+·). On the other hand, the spectrum observed after irradiation of an atactic polypropylene (APP) sample at 77 K in vacuum was resolved into several components which decayed almost up to ca. 263 K to give rise to the broad singlet of T₄MPD^+·. One component was a sharp quartet which was assigned to a methyl radical, ·CH₃·. The other component, a singlet, was attributed to a trapped electron, e_t^?.By comparison of the ESR spectrum of deuterated T₄MPD with that of the normal compound it was found that 60 ～ 70% of the methyl radicals arose from the added T₄MPD due to β-scission, which also formed the N,N,N′-trimethyl-p-phenylenediamine radical, T₃MPD·. The T₃MPD· radical presumably captures an electron at lower temperatures to become a carbanion, T₃MPD^?, which releases the electron to reproduce the T₃MPD· radical at elevated temperatures. This production of the radical T₃MPD· due to the liberation of an electron provides an explanation for the observed increase in intensity of the decay curve in the temperature range from ? 168 K to 185 K. The remaining fraction, 30 ～ 40%, of the total methyl radicals was produced from the PP matrix by an energy transfer from the excited T₄MPD¹ to the PP matrix. The broad singlet which appeared in the temperature range near 195 K was attributed to an acyl radical ～CH₂CH(CH₃)CH₂?O from the observed g-value. By photoillumination of this sample this broad singlet was converted reversibly into the quartet which was assigned to the radical ～CH₂CH(CH₂·)CH₂CHO.     

Cationic oligomerization of anethole: Selective synthesis of dimers and trimers

A linear unsaturated dimer of anethole [II, (E)-1,3-bis(p-methoxyphenyl)-2-methylpentene-1], was prepared in 98% yield with an acetyl perchlorate (AcClO₄) catalyst in a nonpolar solvent (C₆H₆) at a high temperature (70°C). At 0°C a linear unsaturated trimer was formed in high yield with dimer II. The geometric structure of the linear unsaturated dimers was determined by analysis of the nuclear Overhauser effect (NOE) on their ¹H-NMR spectra. NOE analysis showed that at 0°C with AcClO₄, trans-anethole gives the (E)-form (II), whereas cis-anethole yields the (Z)-form. On the other hand, with a metal-halide catalyst (BF₃OEt₂) a cyclic dimer and a cyclic trimer were produced in high yields in a polar solvent [(CH₂Cl₂)] at 70°C; higher oligomers (≥ tetramer) were scarcely formed. The effect of catalysts on the structure of oligomers was explained in terms of the interaction between a growing carbocation and a counterion.     

Determination of the isomerization rate constant HOCH2CH2CH2CH(OO·)CH3 →HOC·HCH2CH2CH(OOH)CH3. Importance of intramolecular hydroperoxy isomerization in tropospheric chemistry

The rate constant of the title reaction is determined during thermal decomposition of di-n-pentyl peroxide C₅H₁₁O( )OC₅H₁₁ in oxygen over the temperature range 463–523 K. The pyrolysis of di-n-pentyl peroxide in O₂/N₂ mixtures is studied at atmospheric pressure in passivated quartz vessels. The reaction products are sampled through a micro-probe, collected on a liquid-nitrogen trap and solubilized in liquid acetonitrile. Analysis of the main compound, peroxide C₅H₁₀O₃, was carried out by GC/MS, GC/MS/MS [electron impact EI and NH₃ chemical ionization CI conditions]. After micro-preparative GC separation of this peroxide, the structure of two cyclic isomers (3S*,6S*)3α-hydroxy-6-methyl-1,2-dioxane and (3R*,6S*)3α-hydroxy-6-methyl-1,2-dioxane was determined from ¹H NMR spectra. The hydroperoxy-pentanal OHC( )(CH₂)₂( )CH(OOH)( )CH₃ is formed in the gas phase and is in equilibrium with these two cyclic epimers, which are predominant in the liquid phase at room temperature. This peroxide is produced by successive reactions of the n-pentoxy radical: a first one generates the CH₃C·H(CH₂)₃OH radical which reacts with O₂ to form CH₃CH(OO·)(CH₂)₃OH; this hydroxyperoxy radical isomerizes and forms the hydroperoxy HOC·H(CH₂)₂CH(OOH)CH₃ radical. This last species leads to the pentanal-hydroperoxide (also called oxo-hydroperoxide, or carbonyl-hydroperoxide, or hydroperoxypentanal), by the reaction HOC·H(CH₂)₂CH(OOH)CH₃+O₂→O()CH(CH₂)₂CH(OOH)CH₃+HO₂. The isomerization rate constant HOCH₂CH₂CH₂CH(OO·)CH₃→HOC·HCH₂CH₂CH(OOH)CH₃ (k₃) has been determined by comparison to the competing well-known reaction RO₂+NO→RO+NO₂ (k₇). By adding small amounts of NO (0–1.6×10¹⁵ molecules cm⁻³) to the di-n-pentyl peroxide/O₂/N₂ mixtures, the pentanal-hydroperoxide concentration was decreased, due to the consumption of RO₂ radicals by reaction (7). The pentanal-hydroperoxide concentration was measured vs. NO concentration at ten temperatures (463–523 K). The isomerization rate constant involving the H atoms of the CH₂( )OH group was deduced: or per H atom: The comparison of this rate constant to thermokinetics estimations leads to the conclusion that the strain energy barrier of a seven-member ring transition state is low and near that of a six-member ring. Intramolecular hydroperoxy isomerization reactions produce carbonyl-hydroperoxides which (through atmospheric decomposition) increase concentration of radicals and consequently increase atmospheric pollution, especially tropospheric ozone, during summer anticyclonic periods. Therefore, hydrocarbons used in summer should contain only short chains (<C₄) hydrocarbons or totally branched hydrocarbons, for which isomerization reactions are unlikely. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 875–887, 1998     

A computational study of the radical–radical reaction of O(<Superscript>3</Superscript>P) + C<Subscript>2</Subscript>H<Subscript>5</Subscript> with comparisons to gas-phase kinetics and crossed-beam experiments

We present density functional theory (DFT) and complete basis set (CBS) calculations of the prototypical radical–radical reaction of ground–state atomic oxygen [O(³P)] with ethyl (C₂H₅) radicals. The respective reaction mechanisms and dynamics were investigated on the doublet potential energy surfaces using the DFT method and CBS model. In the title reaction, the barrierless addition of O(³P) to C₂H₅ led to the formation of energy-rich intermediates that underwent subsequent isomerization and decomposition to yield various products. The products predicted to be found were: H₂CO + CH₃, CH₃CHO + H, c–CH₂OCH₂ + H, ^1,3CH₃COH + H, ^1,3HCOH + CH₃, CH₂CHOH + H, C₂H₃ + H₂O, and CH₂CH₂ + OH. In particular, unlike previous kinetic results, proposed to proceed only through the direct H-atom abstraction process, two distinctive pathways to the formation of CH₂CH₂ + OH were predicted to be in competition: direct, barrierless H-atom abstraction mechanism versus addition process. The competition was consistent with the recent crossed-beam investigations, and their microscopic dynamic characteristics are discussed at the molecular level.