Cationic polymerizations by aromatic initiating systems. III. Model reactions for initiation and termination using the t-BuCl/ϕ3Al and Clt-R-Clt/ϕ3Al systems

Preparatory for the synthesis of terminally functional polyisobutylenes carrying one or two phenyl end groups, model experiments have been carried out using novel tert-butyl chloride/triphenylaluminum and 2,6-dichloro-2,6-dimethylheptane/triphenylaluminum initiating systems. As anticipated, t-BuCl was phenylated by ø₃Al and the product is tert-butylbenzene. The reaction is extremely rapid and temperature has little effect on it in the 0 to ?60°C range. The interaction between the 2,6-dichloro-2,6-dimethylheptane and ø₃Al was found to be complicated by a proximity effect which leads to proton elimination in addition to phenylation. The formation of the desired diterminally phenylated product is not quanititative even at ?60°C.     

Two-dimensional cobalt metal-organic frameworks for efficient C3H6/CH4 and C3H8/CH4 hydrocarbon separation

A Co-based two-dimensional (2D) microporous metal-organic frameworks (UPC-32) with narrow distance between layers and layers (3.8 Å) exhibits high selectivity of C₃H₆/CH₄ (31.46) and C₃H₈/CH₄ (28.04) at 298 K and 1 bar. It is the first 2D Co-MOF that showed selective separation of C3 hydrocarbon from CH₄.     

F-to-HF reactions. IX. Nonthermal complications for the CH4/C3F6/C2F6 moderated nuclear recoil system

Results are reported from moderated nuclear recoil ¹⁸F experiments with the CH₄/C₃F₆/C₂F₆ mixture system. At a 99.5% confidence level measurement precision of ±3.4%, non-thermal F-to-HF reactions are phenomenologically suppressed at C₂F₆ moderator concentrations in the range of 95.0–99.95 mol-%. Effectively equilibrium reaction conditions can be established in well-designed experiments of this type.     

Reactions of Cl2P3/2: Absolute rate constants for reaction with H2, CH4, C2H6, CH2Cl2, C2Cl4, and c?C6H12

The absolute rate constants have been measured for several gas-phase chlorine atom-molecule reactions at 25°C by resonance fluorescence. These reactions and their corresponding rate constants in units of cm³ mole^?1 sec^?1 are: The effects of varying the substrate pressure, total pressure, light intensity and chlorine-atom source on the value of the bimolecular rate constants have been investigated for all these reactions. Conditions under which no competing side reaction occurs were established and the reported rate constants were measured under these conditions. For reactions (2), (5), (6), (7), and 8, there is a discrepancy of a factor of two between the rate constants measured in this work and values in the literature; it is suggested that this is due to an error in the previously measured value of k/k upon which the relative measurements in the literature ultimately depend.     

Arrhenius parameters for the reactions CH3. + C4H10 → CH4 + C4H9. and C2H5. + C4H10 → C2H6 + C4H9.

Study of n-butane pyrolysis at high temperature in a flow system allows measurement of the sum of the rate constants of the initiation reactions and of the Arrhenius parameters of the reactions Established data for k₁/k₂ allow estimation of k₁ for 951°K and this, with recent thermochemical data, yields the result log k_?1 (l.mole s^?1) = 8.5, in remarkable agreement with a recent measurement [20] but over si×ty times smaller than conventional assumption. The product k₃k₄ (l.²mole^?2s^?2) is found to be associated with the Arrhenius parameters log (A₃A₄) = 21.90 ± 0.6 and (E₃ + E₄) = 38.3 ± 2.7 kcal/mole. These values are much higher than would be e×pected on the basis of low temperature estimates. Independent evaluation gives log A₄ = 10.5 ± 0.4 (l.mole^?1s^?1) and E₄ = 20.1 ± 1.7 kcal/mole, hence log A₃ = 11.4 ± 0.8 (l.mole^?1s^?1) and E₃ = 18.2 ± 3.2 kcal/mole. These values are shown to be entirely consistent with a wide range of results from pyrolytic studies, and it is argued that they further confirm the view that Arrhenius plots for alkyl radical–alkane metathetical reactions are strongly curved, in part due to tunneling and, appreciably, to other as yet unidentified effects. Since there is published evidence that metathetical reactions involving hydrogen atoms show even greater curvature, it is suggested that this may be a characteristic of many metathetical reactions.     

Kinetics and mechanism of the cationic polymerization of tetrahydrofuran in solution. THF–CH2Cl2 and THF–CH2Cl2/CH3NO2 systems

Cationic polymerization of tetrahydrofuran (THF) in CH₂Cl₂ solvent and in mixed CH₂Cl₂/CH₃NO₂ solvent was initiated with 1,3-dioxolan-2-ylium cations with AsF and SbF anions. Dissociation constants of the polytetrahydrofuranium ion pairs into ions were measured (e.g., K_D = 1.5 × 10^?5M at 25°C and [THF]₀ = 7.0M; CH₂Cl₂ solvent) and were found to be more than 100 times lower than in CH₃NO₂ solvent at the same [THF]₀ and temperature. The rate constants k and k, measured for degrees of dissociation ranging from 0.03 to 0.35 in CH₂Cl₂, were the same within an experimental error of measurements (±15% of the value of k_p). Dependence of k( = k = k) on the dielectric constant was a monotonous function in three different solvents, namely, CCl₄, CH₂Cl₂, and CH₃NO₂, which covered a large range of dielectric constants of the medium (from D = 5 to D = 22) and degrees of dissociation of the macroion pairs, α (from 0.03 to more than 0.70). Thus a decrease in the dielectric constant increases the rate constant k in the whole range of studied polarities of the medium. This result confirms an earlier conclusion that the rate constant of propagation does not depend on the state of aggregation of ions and k = k.     

Cationic polymerization by aromatic initiating systems. IV. Synthesis and characterization of α-ω-diphenylpolyisobutylene

The polymerization of isobutylene using ø₃Al coinitiator and the tertiary chlorides tert.-butyl chloride (t-BuCl) and 2,6-dichloro-2,6-dimethylheptane (Cl^t-R-Cl^t) initiators has been studied. Polymerization rates with the t-BuCl/ø₃Al and Cl^t-R-Cl^t/ø₃Al initiating systems were high in the ?20 to ?70°C range. Yields and molecular weights increased with decreasing temperature. As predicted by model experiments the extent of phenylation increases with decreasing temperatures. According to spectroscopic evidence the polyisobutylenes carry phenyl end groups.     

Reactions between rubidium atoms and C6F6, C2Cl4, C2HCl3, CH2=CCl2 or trans-C2H2Cl2 in crossed molecular beams

Molecular and fragment negative ions are produced from the collisions between rubidium atoms and several kinds of halogenated unsaturated organic molecules in crossed supersonic beams. Their apparent electron affinities and the bond dissociation energies are measured.     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. II. Effects of steric hindrance of carboxylate counteranions

Effects of steric crowding of the substituent of carboxylate counteranions on living cationic polymerization of isobutyl vinyl ether (IBVE) were investigated with the use of two series of carboxylic acids with various carbonyl substituents [RCOOH; R = (aliphatic series) CH₃CH₂, (CH₃)₂CH, (CH₃)₃C; (aromatic series) C₆H₅CH₂, (C₆H₅)₂CH, (C₆H₅)₃C] in conjunction with tin tetrabromide (SnBr₄) and 1,4-dioxane (DO) in toluene at 0°C. The overall polymerization rate increased with increasing the bulkiness of the substituents R in both the series: R = CH₃ (1) ≃ CH₃CH₂ (1) < (CH₃)₂CH (1.76) < (CH₃)₃C (2.31); C₆H₅CH₂ (0.84) < (C₆H₅)₂CH (0.98) < (C₆H₅)₃C (1.74); the values in the parentheses show the relative polymerization rate. In all the polymerizations, the number-average molecular weight (M_n) of the polymers was directly proportional to monomer conversion and in good agreement with the calculated values, assuming that one RCOOH molecule forms one polymer chain. The living nature of these polymerizations was further confirmed by a linear increase in M_n of the polymers upon sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixtures. In the polymerizations with sterically less hindered carboxylic acids [R = CH₃CH₂, (CH₃)₂CH, C₆H₅CH₂, (C₆H₅)₂CH], the molecular weight distribution (MWD) of the polymers was very narrow (M_w/M_n < 1.1) throughout the polymerizations. In contrast, with bulkier substituent-containing counterparts [R = (CH₃)₃C, (C₆H₅)₃C], the polymerizations led to the polymers of relatively broad MWD (M_w/M_n ≅ 1.5 at ca. 100% monomer conversion). The bulky substituents such as (CH₃)₃C and (C₆H₅)₃C may decrease the interconversion rate between a dormant and an active species and increase the time-average concentration of the active growing species. The stereoregularity of the obtained polymers was not changed much with the steric environment of the counteranion (meso: 66–69%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2923–2932, 1999     

Schwermetall-π-Komplexe. IX. Die Kettenpolymere [(1,2- (CH3)2C6H4BiCl3)2], [(1,3) (CH3)2C6H4BiCl3)2] und [(1,4- (CH3)2C6H4BiCl3)2]

Heavy Metal π-Complexes. IX. The Chain Polymers [(1,2- (CH₃)₂C₆H₄BiCl₃)₂], [(1,3- (CH₃)₂C₆H₄BiCl₃)₂] and [(1,4- (CH₃)₂C₆H₄BiCl₃)₂] In the crystal structures of the three solid state complexes (C₆H₄(CH₃)₂BiCl₃ (C₆H₄(CH₃)₂ = o-xylene: 1 , m-xylene: 2 , p-xylene: 3 ) quasi-dimeric units of almost undistorted, arene coordinated BiCl₃ fragments can be found that are further associated via additional Bi? Cl contacts to form one-dimensional polymeric chains. Whereas the chains of 2 and 3 are constituted by Bi₂Cl₂ four-membered rings only, further Cl-bridging in 1 leads to additional trigonal-bipyramidal arrangements with Bi atoms exhibiting coordination numbers of 3 + 3 + 1 and 3 + 2 + 1, respectively (prim. + sec. Cl contacts + arene). The arene-metal bonding is characterized by Bi-arene distances in the range from 297 – 306 pm, including ring slippages of 24 –41 pm and 73 pm with the Bi atoms being six and seven coordinated, respectively. The direction of this slipping with respect to the arene's methylation sites cannot be understood in terms of electronic influences but is shown to be caused by steric demands. The values IP₁ of the arenes prove to determine the colours of the complexes.     

Kinetics and mechanism of the decomposition of Cs2Pt[CH3]2Cl4 in aqueous solution with concurrent formation of C2H6, C2H4, and C2H5Cl

Reductive elimination of ethane from Cs₂Pt(CH₃)₂Cl₄ in aqueous chloride solutions at 368 K is accompanied by C-H bond scission. A mechanism is proposed for the reaction which includes the intermediate formation of an ethylhydrideplatinum(IV) and an ethylplatinum(II) complex.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 29, No. 2, pp. 154–158, March–April, 1993.     

Nucleophilic aromatic substitution using Et3SiH/cat. t-Bu-P4 as a system for nucleophile activation

A novel type of deprotonative arylation of nucleophiles was conducted using Et(3)SiH/cat. t-Bu-P4 and the powerful S(N)Ar reactions of aryl fluorides were accomplished using alcohols and malonates as nucleophiles.     

Condensed two- and three-dimensional aromatic systems: a theoretical study on the relative stabilities of isomers of CB19H16+, B20H15Cl, and B20H14Cl2 and comparison to B12H10Cl22-, C6H4Cl2, C10H7Cl, and C10H6Cl2

DFT studies (B3LYP/6-31G) on mono- and dichloro derivatives of benzene, naphthalene, B12H12(2-), four-atom-sharing condensed systems B20H16, and monocarborane isomers of B20H16 are used to compare the variation of relative stability and aromaticity between condensed aromatics. The trends in the variation of the relative energies and aromaticity in these two- and three-dimensional systems are similar. Aromaticity, estimated by NICS values, does not change considerably with condensation or substitution. The minor variation in the relative energies of the isomers of chloro derivatives is explained by the topological charge stabilization rule of Gimarc. The compatibility of the cap and ring orbitals decides the relative stability of CB19H16+.     

[C5H4C(CH3)2CH2CH=CH2]Sm(OH)Cl·2MgCl2·4THF的晶体结构分析

用Ｘ－射线晶体结构衍射法测定了［Ｃ５Ｈ４Ｃ（ＣＨ３）２ＣＨ２ＣＨ＝ＣＨ２］Ｓｍ（ＯＨ）Ｃｌ·２ＭｇＣｌ２·４ＴＨＦ的晶体结构。它属三斜晶系,空间群为Ｐ＾－１,ａ＝１０．７７３（２）,ｂ＝１２．８３６（３）,ｃ＝１５．４７８（３）Ａ,ａ＝１１１．４６（３）,β＝１０７．７１（３）,γ＝９２．５４（３）°,Ｖ＝１８６８（１）Ａ＾３,Ｍｒ＝８２７．９１,Ｄｘ＝１．４７２ｇ／ｃｍ＾３,μ＝２．０００６ｍｍ     

Cationic polymerizations by aromatic initiating systems. V. Oxidation and chlorination of α,ω-diphenylpolyisobutylene and subsequent reaction with living polystyrene anions to form block copolymers

α,ω-Diphenylpolyisobutylenes produced by the Cl^t-R-Cl^t/ø₃Al initiating system have been derivatized. Model chloromethylation of t-butylbenzene by CH₃OCH₂Cl in chloroform indicated that beyond ca. 35% yield significant alkylative side reactions occurred. Phenyl end groups (average 1.5 per chain) and unsaturated chain ends (from proton elimination) have been converted to carboxyl end groups by oxidation with RuO₄ in chloroform. Subsequently the carboxyl end groups were converted to acyl chloride termini by reaction with SOCl₂. The latter end groups were coupled with living polystyryl anions to form isobutylene-styrene blcok copolymers.     

Modification mechanism in olefin polymerization catalysts TiCl4/MgCl2–aromatic ester–Al(C2H5)3

An IR/UV study of the interaction between ethyl benzoate and Al(C₂H₅)₃ in dilute heptane solution at 25–75°C demonstrated that the ester is readily reduced under these conditions with the formation of two aluminum dialkyl alkoxides, Al(C₂H₅)₂ and Al(C₂H₅)₂OC(C₂H₅)₂C₆H₅, as major products. Rate constants of the reduction of the initial AI(C₂H₅)₃ · ester complex by free AI(C₂H₅)₃ are 2.9 (26°C), 14.4 (50°C), and 59.6 (75°C) L/mol min; E_act = 52.0 kj/mol. Study of propylene polymerization with this catalytic system at 50°C showed that preliminary aging of the AI(C₂H₅)₄–ethyl benzoate mixtures at 25°C for 24 h and at 50°C for 2 h does not adversely affect catalyst performance. These data suggest that the possible actual modifier in this catalytic system is aluminum alkoxide with a highly branched tertiary alkoxy group.