The effect of pH on the dimensionality of coordination polymers

Hydrothermal reactions of simple alkaline salts or their hydroxides with 3,5-pyrazoledicarboxylic acid (H(3)pdc) yielded seven new compounds. At a lower pH level three one-dimensional structures [Ca(Hpdc)(H(2)O)(4)].2H(2)O (1), [Ca(Hpdc)(H(2)O)(4)].H(2)O (2), and [Ba(H(2)pdc)(2)(H(2)O)(4)].2H(2)O (6) were obtained by evaporation of the solutions resulting from hydro(solvo)thermal reactions of MCl(2) (M = Ca, Ba) with H(3)pdc in water (1, 6) or in water/Et(3)N (2) at 150 degrees C for 3 days. Crystal structures of 1 and 2 contain zigzag chains of metal centers bridged by a single Hpdc(2-) ligand, whereas structure 6 consists of linear chains of metal centers bridged by two H(2)pdc(-) ligands. A dimer molecule [Sr(H(3)pdc)(H(2)pdc)(2)(H(2)O)(3)](2).2(H(3)pdc).4H(2)O (4) was obtained from a similar hydrothermal reaction using Sr(ClO(4))(2).6H(2)O instead of MCl(2). This compound contains [2+2] metallomacrocycles. At higher pH levels (pH = 4-6), the three-dimensional polymers [M(Hpdc)(H(2)O)] (Ca 3, Sr 5, Ba 7 ) were isolated by reactions of MCl(2) (M = Ca, Sr, Ba) with H(3)pdc in water/Et(3)N or in M(OH)(2) (M = Ca, Sr, Ba) with H(3)pdc in water under hydro(solvo)thermal conditions (150 degrees C, 3 days). Calcium and strontium are seven- and nine-coordinated in 3 and 5, respectively; barium is nine- and ten-coordinated in 7. It was observed that the increase in pH resulted in a higher connectivity level of ligands, which in turn leads to a higher dimensionality of the crystal structures. The correlation between the structures and pH values will be discussed. Crystal data: for 1, monoclinic, space group P2(1)/n (No. 14), with a = 8.382(2), b = 12.621(3), c = 11.767(2) A, beta = 98.91(3) degrees, Z = 4; for 2, 3, and 5, monoclinic, space group P2(1)/c (No. 14), Z = 4, a = 7.711(2), b = 15.574(3), c = 9.341(2) A, beta = 96.73(3) degrees, Z = 4 (2), a = 6.616(1), b = 12.654(3), c = 8.782(2) A, beta = 103.65(3) degrees, Z = 4 (3), a = 9.213(2), b = 12.088(3), c = 6.196(2) A, beta = 98.96(3) degrees (5); for 4 and 7, triclinic, space group P1 (No. 2), with a = 11.263(2), b = 11.460(3), c = 12.904(2) A, alpha = 71.54(3), beta = 98.96(3), gamma = 89.03(3) degrees, Z = 1 (4), a = 7.107(1), b = 9.780(2), c = 11.431(2) A, alpha = 74.69(3), beta = 73.39(3), gamma = 85.29(3) degrees, Z = 2 (7); for 6, monoclinic, space group C2/c (No. 15), with a = 20.493(4), b = 6.708(1), c = 15.939(3) A, beta = 123.56(3) degrees, Z = 4.     

Polyfluoro-1,2-epoxy alkanes and cycloalkanes. Part IV [1]. Thermal reactions of the epoxides of the pentamer and hexamer oligomers of tetrafluoroethene

Oxirans (1) and (2), derived respectively from the pentamer and hexamer oligomers of tetrafluoroethene, were pyrolysed over pyrex glass at 300–500° alone and in the presence of cyclohexene, bromine and toluene. Thus, oxiran (1), pyrolysed alone, afforded perfluoro-2-methylbut-1-ene (3), perfluoro-2,3-dimethylpent-2-ene (4) and (E) and (Z) perfluoro-2,3-hex-3-ene (TFE tetramer) (5a, 5b). Co-pyrolysis of (1) with bromine afforded (E) and (Z) 2-bromoperfluoro-3-methylpent-2-ene (6a, 6b), whilst with toluene, (E) and (Z) 2H-perfluoro-3-methylpent-2-ene (7a, 7b) were obtained: (1) with excess cyclohexene also gave (7a, 7b). The oxiran (2), on pyrolysis alone, gave only (3). In the presence of bromine, (2) gave an equimolar mixture of 1-bromoperfluoro-3-methylpentan-2-one (8) and 3-bromoperfluoro-3-methylpentane (9). Co-pyrolysis of (2) with toluene yielded (3) and 3H-perfluoro-3-methylpentane (10). Pyrolysis of (2) with cyclohexene at 175° gave perfluoro-3-methyl-2-(1-methylpropyl)pent-2-en-1-oylfluoride (11), pentafluoroethylcyclohexane (12) and perfluoro[(1-ethyl-1-methylpropyl) (1-methylpropyl)]ketne (13).     

Investigation of the radical product channel of the CH3COO2 + HO2 reaction in the gas phase

The reaction of CH(3)C(O)O(2) with HO(2) has been investigated at 296 K and 700 Torr using long path FTIR spectroscopy, during photolysis of Cl(2)/CH(3)CHO/CH(3)OH/air mixtures. The branching ratio for the reaction channel forming CH(3)C(O)O, OH and O(2) (reaction ) has been determined from experiments in which OH radicals were scavenged by addition of benzene to the system, with subsequent formation of phenol used as the primary diagnostic for OH radical formation. The dependence of the phenol yield on benzene concentration was found to be consistent with its formation from the OH-initiated oxidation of benzene, thereby confirming the presence of OH radicals in the system. The dependence of the phenol yield on the initial peroxy radical precursor reagent concentration ratio, [CH(3)OH](0)/[CH(3)CHO](0), is consistent with OH formation resulting mainly from the reaction of CH(3)C(O)O(2) with HO(2) in the early stages of the experiments, such that the limiting yield of phenol at high benzene concentrations is well-correlated with that of CH(3)C(O)OOH, a well-established product of the CH(3)C(O)O(2) + HO(2) reaction (via channel (3a)). However, a delayed source of phenol was also identified, which is attributed mainly to an analogous OH-forming channel of the reaction of HO(2) with HOCH(2)O(2) (reaction ), formed from the reaction of HO(2) with product HCHO. This was investigated in additional series of experiments in which Cl(2)/CH(3)OH/benzene/air and Cl(2)/HCHO/benzene/air mixtures were photolysed. The various reaction systems were fully characterised by simulations using a detailed chemical mechanism. This allowed the following branching ratios to be determined: CH(3)C(O)O(2) + HO(2)--> CH(3)C(O)OOH + O(2), k(3a)/k(3) = 0.38 +/- 0.13; --> CH(3)C(O)OH + O(3), k(3b)/k(3) = 0.12 +/- 0.04; --> CH(3)C(O)O + OH + O(2), k(3c)/k(3) = 0.43 +/- 0.10: HOCH(2)O(2) + HO(2)--> HCOOH + H(2)O + O(2), k(17b)/k(17) = 0.30 +/- 0.06; --> HOCH(2)O + OH + O(2), k(17c)/k(17) = 0.20 +/- 0.05. The results therefore provide strong evidence for significant participation of the radical-forming channels of these reactions, with the branching ratio for the title reaction being in good agreement with the value reported in one previous study. As part of this work, the kinetics of the reaction of Cl atoms with phenol (reaction (14)) have also been investigated. The rate coefficient was determined relative to the rate coefficient for the reaction of Cl with CH(3)OH, during the photolysis of mixtures of Cl(2), phenol and CH(3)OH, in either N(2) or air at 296 K and 760 Torr. A value of k(14) = (1.92 +/- 0.17) x 10(-10) cm(3) molecule(-1) s(-1) was determined from the experiments in N(2), in agreement with the literature. In air, the apparent rate coefficient was about a factor of two lower, which is interpreted in terms of regeneration of phenol from the product phenoxy radical, C(6)H(5)O, possibly via its reaction with HO(2).     

The organic ligands as template: the synthesis, structures and properties of a series of the layered structure rare-earth coordination polymers

A series of new 2D-layered structural rare-earth coordination polymers with the general formal [Ln(C₈H₄O₅)(H₂O)₅]·(H₂O)·(C₈H₄O₅)_1/2 (Ln=Eu for (1); Gd for (2); Tb for (3); Dy for (4); and Er for (5)) have been yielded by hydrothermal synthesis. The coordination polymers crystallize in monoclinic space group C/2c with a=19.838(16), b=10.529(8), c=17.752(14) Å, β=107.503(14)° for (1), with a=19.823(7), b=10.552(4), c=17.762(6) Å, β=107.443(6)° for (2), with a=19.770(4), b=10.519(2), c=17.698(4) Å, β=107.52(3)° for (3), with a=19.632(2), b=10.492(2), c=17.617(3) Å, β=107.470(12)° for (4), with a=19.648(7), b=10.480(3), c=17.598(6) Å, β=107.502(6)° for (5), respectively. And the metal ions (Ln³⁺) are located in nine-member coordination environment. The carboxyl groups from 5-hydroxyisophthalate chelate the metal ions to form 1D helical cation chains. It is interesting that these helical cation chains are arranged to form 2D anion–cation layers by the uncoordinated ligands' anions as template. And the luminescence properties of the rare-earth ions are studied in the paper.     

Biaryl formation in the synthesis of endo and exo-platinacycles

The reactions of cis-[Pt(2)(4-MeC(6)H(4))(4)(μ-SEt(2))(2)] with bifunctional ligands ArCH=NCH(2)(2-XC(6)H(4)) containing a C-X bond at the ortho positions of the benzyl ring (Ar = 4-ClC(6)H(4), X = Br (1d); Ar = 2,4,6-(CH(3))(3)C(6)H(2), X = Br (1e); Ar = 2,4,6-(CH(3))(3)C(6)H(2), X = Cl (1f); Ar = 2-CH(3)C(6)H(4), X = Br (1h); Ar = 2,6-F(2)C(6)H(3), X = Br (1i)) in refluxing toluene were studied. Several types of platinum(II) cyclometallated compounds containing a biaryl linkage were obtained: i) endo-five-membered with a Pt-C(sp(2)) bond (2d, 2h), ii) endo-six-membered with a Pt-C(sp(3)) bond (2e, 2f), and iii) exo-five membered with a Pt-C(sp(2)) bond (2i). The formed biaryl linkage involves the metallated ring for 2i and the non-metallated ring for the endo-metallacycles. The reaction of compounds 2 with PPh(3) produced the corresponding phosphine derivatives, some of which (3d, 3e, 3h and 3i) were characterised crystallographically. In addition, compound [PtBr{2-CH(3)C(6)H(3)C(6)H(4)CH=NCH(2)(2-C(6)H(4)Br)}SEt(2)] (2c) containing a seven-membered endo-metallacycle was also obtained and characterised crystallographically.     

Nanosized particles of organically modified silica as microreactors to enhance the regioselectivity in the photocycloaddition of 9-substituted anthracenes

[reaction: see text] Nanosized particles of modified silica with 3-ammoniumpropyl residue have been prepared and successfully used as microreactors to control the regioselectivity of the photocycloaddition of five 9-substituted anthracences [AnCH(2)N(+)(CH(3))(3)Br(-) (1), AnCH(2)COO(-)Na(+) (2), AnCH(2)CH(2)COOH (3), AnCH(2)OH (4), AnCH(3) (5), where An = 9-anthryl]. While the photocycloaddition of the five substrates in methanol mainly gave rise to their head-to-tail (h-t) photocyclomers, irradiation of 1-4 incorporated in the suspension of the modified silica in methanol almost exclusively yielded the head-to-head (h-h) photocyclomers with high quantum yields.     

Toward the observation of quartet states of the ozone radical cation: insights from coupled cluster theory

Since the discovery of ozone depletion, the doublet electronic states of the ozone radical cation have received much attention in experimental and theoretical investigations, while the low-lying quartet states have not. In the present research, viable pathways to the quartet states from the lowest three triplet states of ozone, (3)A(2), (3)B(2), and (3)B(1), and excitations from the (2)A(1) and (2)B(2) states of the ozone radical cation have been studied in detail. The potential energy surfaces, structural optimizations, and vibrational frequencies for several states of ozone and its radical cation have been thoroughly investigated using the complete active space self-consistent field, unrestricted coupled cluster theory from a restricted open-shell Hartree-Fock reference including all single and double excitations (UCCSD), UCCSD method with the effects of connected triple excitations included perturbatively, and unrestricted coupled cluster including all single, double, and triple excitations with the effects of connected quadruple excitations included perturbatively. These methods used Dunning's correlation-consistent polarized core-valence basis sets, cc-pCVXZ (X = D, T, Q, and 5). The most feasible pathways (symmetry and spin allowed transitions) to the quartet states are (4)A(1)<--(3)A(2), (4)A(2)<--(3)A(2), (4)A(1)<--(3)B(2), (4)A(2)<--(3)B(1), (4)B(2)<--(3)B(1), (4)A(2)<--(1)A(1), (4)B(2)<--(1)A(1), and (4)A(1)<--(1)A(1) with vertical ionization potentials of 12.46, 12.85, 12.82, 12.46, 12.65, 13.43, 13.93, and 14.90 eV, respectively.     

Experimental and computational study of the formation mechanism of the diammoniate of diborane: the role of dihydrogen bonds

The mechanism of formation of ammonia borane (NH(3)BH(3), AB) and the diammoniate of diborane ([H(2)B(NH(3))(2)][BH(4)], DADB) in the reaction between NH(3) and THF·BH(3) was explored experimentally and computationally. Ammonia diborane (NH(3)BH(2)(μ-H)BH(3), AaDB), a long-sought intermediate proposed for the formation of DADB, was directly observed in the reaction using (11)B NMR spectroscopy. The results indicate that dihydrogen bonds between the initially formed AB and AaDB accelerate the formation of DADB in competition with the formation of AB.     

Synthesis and Molecular Structures of Hydrotris(dimethylpyrazolyl)borate Complexes of the Lanthanides

The reaction of lanthanide triflates with 2 equiv of potassium hydrotris(dimethylpyrazolyl)borate (Tp(Me)()2) gives good yields of complexes of composition Ln(Tp(Me)()2)(2)OTf. For La (2), Ce (3), Pr (4), and Nd (5) the complexes are seven-coordinate in the solid state with the triflate group coordinated to the metal in unidentate fashion. Complex 5 crystallizes in the monoclinic space group P2(1)/c with a = 17.629(3) ?, b = 12.740(2) ?, c = 18.163(3) ?, beta = 107.35(1) degrees, V = 3893(1) ?(3), Z = 4, and R(w) = 0.0458. For the complexes of Y (1), Sm (6), Eu (7), Gd (8), Dy (9), Ho (10), and Yb (11), the smaller size of the metal ion leads to ejection of the triflate from the coordination sphere and the complexes are ionic in the solid state with a six-coordinate metal center. Complex 11 crystallizes in the monoclinic space group C2/m with a = 16.593(7) ?, b = 13.671(5) ?, c = 8.746(2) ?, beta = 91.66(3) degrees, V = 1983(1) ?(3), Z = 2, and R(w) = 0.0416. In solution, however, complex 6 adopts a seven-coordinate molecular structure with the triflate ion within the first coordination sphere.     

Studies on the properties of organoselenium(IV) fluorides and azides

The reaction of organoselenides and -diselenides (R2Se and (RSe)2) with XeF2 furnished the corresponding organoselenium(IV) difluorides R2SeF2 (R=Me (1), Et (2), iPr (3), Ph (4), Mes (=2,4,6-(Me)3C6H2) (5), Tipp (=2,4,6-(iPr)3C6H2) (6), 2-Me 2NCH2C6H4 (7)), and trifluorides RSeF3 (R=Me (8), iPr (9), Ph (10), Mes (11), Tipp (12), Mes* (=2,4,6-(tBu) 3C6H2) (13), 2-Me2NCH2C6H4 (14)), respectively. In addition to characterization by multinuclear NMR spectroscopy, the first molecular structure of an organoselenium(IV) difluoride as well as the molecular structures of subsequent decomposition products have been determined. The substitution of fluorine atoms with Me3SiN3 leads to the corresponding organoselenium(IV) diazides R2Se(N3)2 (R=Me (15), Et (16), iPr (17), Ph (18), Mes (19), 2-Me 2NCH2C6H4 (20)) and triazides RSe(N3)3 (R=Me (21), iPr (22), Ph (23), Mes (24), Tipp (25), Mes* (26), 2-Me2NCH2C6H4 (27)), respectively. The organoselenium azides are extremely temperature-sensitive materials and can only be handled at low temperatures.     

Synthesis and characterization of octa- and hexanuclear polyoxomolybdate wheels: role of the inorganic template and of the counterion

Eight new compounds based on [O3PCH2PO3]4- ligands and {MoV2O4} dimeric units have been synthesized and structurally characterized. Octanuclear wheels encapsulating various guests have been isolated with different counterions. With NH4+, a single wheel was obtained, as expected, with the planar CO32- guest, (NH4)12[(MoV2O4)4(O3PCH2PO3)4(CO3)2].24H2O (1a), while with the pyramidal SO32- guest, only the syn isomer (NH4)12[(MoV2O4)4(O3PCH2PO3)4(SO3)2].26H2O (2a) was characterized. The corresponding anti isomer was obtained with Na+ as counterions, Na12[(MoV2O4)4(O3PCH2PO3)4(SO3)2]39H2O (2b), and with mixed Na+ and NH4(+) counterions, Na+(NH4)11[(MoV2O4)4(O3PCH2PO3)4(SO3)2].13H2O (2d). With [O3PCH2PO3]4- extra ligands, the octanuclear wheel Li12(NH4)2[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].31H2O (4a) was isolated with Li+ and NH4+ counterions and Li14[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].34H2O (4c) as a pure Li+ salt. A new rectangular anion, formed by connecting two MoV dimers and two MoVI octahedra via methylenediphosphonato ligands with NH4+ as counterions, (NH4)10[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2(HO3PCH2PO3)2].15H2)O (3a), and Li9(NH4)2Cl[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2]. 22H2O (3d) as a mixed NH4+ and Li+ salt have also been synthesized. The structural characterization of the compounds, combined with a study of their behavior in solution, investigated by 31P NMR, has allowed a discussion on the influence of the counterions on the structure of the anions and their stability. Density functional theory calculations carried out on both isomers of the [(MoV2O4)4(O3PCH2PO3)4(SO3)2]12- anion (2), either assumed isolated or embedded in a continuum solvent model, suggest that the anti form is favored by approximately 2 kcal mol(-1). Explicit insertion of two solvated counterions in the molecular cavity reverses this energy difference and reduces it to less than 1 kcal mol(-1), therefore accounting for the observed structural versatility.     

硝酸锌与四种α-氨基酸配合物的恒容燃烧能测定

Ten solid complexes of zinc nitrate with L-α-leucine(Leu)， L-α-valine(Val)， L-α-tryptophan(Try) and L-α-threonine(Thr) were prepared in water. The compositions of these complexes are determined by chemical analysis and elemental analysis， which are identified as Zn(Leu)(NO₃)₂·2H₂O(A)， Zn(Leu)₂(NO₃)₂·H₂O(B)， Zn(Val)(NO₃)₂·2H₂O(C)， Zn(Val)₂(NO₃)₂·H₂O(D)， Zn(Val)₃(NO₃)₂·H₂O(E)， Zn(Try)(NO₃)₂·2H₂O(F)， Zn(Try)₂(NO₃)₂·H₂O(G)， Zn(Thr)(NO₃)₂·2H₂O(H)， Zn(Thr)₂(NO₃)₂·H₂O(I) and Zn(Thr)₃(NO₃)·H₂O(J). The constant-volume combustion energies of the complexes， Δ_cU(complex)， were determined by a precise rotating bomb calorimeter at 298.15K. Standard enthalpies of combustion，Δ_cH_m^?(complex， s， 298.15K)， and standard enthalpies of formation， Δ_fH_m^?(complex，s，298.15K) for these complexes were calculated as (4523.22±2.08)， (7208.86±4.28)， (3442.21±1.85)， (5971.21±3.32)， (9007.26±4.24)， (5802.35±2.14)， (10891.58±3.01)， (2147.40±1.28)， (4120.83±0.99)， (6444.68±3.85)kJ·mol^-1 and (615.67±2.27)， (1863.16±4.60)， (1017.34±2.00)， (1742.93±3.61)， (2245.70±4.73)， (1161.18±2.61)， (1829.71±4.20)， (1632.82±1.43)， (1885.55±1.50)， (2770.25±4.21)kJ·mol^-1， respectively.     

C2H3自由基与O2反应的红外发射光谱及反应通道

不饱和多原子Ｃ２Ｈ３自由基在碳氢化合物燃烧过程中起着非常重要的作用,其各种基元反应影响整个燃烧过程的速率和形成的产物［１－３］．Ｇｕｔｍａｎ和合作者［６］测量了总包反应在室温的速率常数（（１． ０６±０． ２１） ×１０－１１ｃｍ３· ｍｏｌｅｃｕｌｅ－１· ｓ－１）,仅检测到ＨＣＯ和Ｈ２ＣＯ两个反应产物,Ｓｌａｇｌｅ和合作者［７］使用光电离质谱法研究了温度在２９９－１００５ Ｋ范围内,宏观反应的Ａｒｒｈｅｎ－ｎｉｕｓ表达式 ｋ＝（６． ９２±０． １７）×１０－１２ｅｘｐ（（１２０±１２）／ Ｔ） ｃｍ…     

Influence of the Li+ on the structure of the [Cu3phis3]3+ cation

When [Cu(3)(phis)(3)](ClO(4))(3), obtained from Cu(ClO(4))(2).6H(2)O with the Na(+) or K(+) salt of the phis anion (Hphis = N-(2-pyridylmethyl)-l-histidine), is reacted with LiClO(4), the tricopper cationic structure rearranged to accommodate a Li(+) ion to form [(ClO(4))Li[Cu(3)(phis)(3)]](ClO(4))(3) which can also be prepared directly by reacting Cu(ClO(4))(2).6H(2)O with the Li(+) salt of the phis anion.     

Polynuclear bismuth-oxo clusters: insight into the formation process of a metal oxide

The reaction of the bismuth silanolates [Bi(OSiR2R')3] (R = R' = Me, Et, iPr; R = Me, R' = tBu) with water has been studied. Partial hydrolysis gave polynuclear bismuth-oxo clusters whereas amorphous bismuth-oxo(hydroxy) silanolates were obtained when an excess of water was used in the hydrolysis reaction. The metathesis reaction of BiCl3 with NaOSiMe3 provided mixtures of heterobimetallic silanolates. The molecular structures of [Bi18Na4O20(OSiMe3)18] (2), [Bi33NaO38(OSiMe3)24].3 C7H8 (3.3 C7H8), [Bi50Na2O64(OH)2(OSiMe3)22].2 C7H8.2H2O (4.2 C7H8.2 H2O), [Bi4O2(OSiEt3)8] (5), [Bi9O7(OSiMe3)13].0.5 C7H8 (6. 0.5C7H8), [Bi18O18(OSiMe3)18)].2C7H8 (7. 2C7H8) and [Bi20O18(OSiMe3)24].3C7H8 (8.3C7H8) are presented and compared with the solid-state structures of [Bi22O26(OSiMe2tBu)14] (9) and beta-Bi2O3. Compound 2 crystallises in the triclinic space group P1 with the lattice constants a = 17.0337(9), b = 19.5750(14), c = 26.6799(16) A, alpha = 72.691(4), beta = 73.113(4) and gamma = 70.985(4) degrees ; compound 3.3C7H8 crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.488(4), b = 22.539(5), c = 26.154(5) A and beta = 100.79(3) degrees ; compound 4.2C7H82 H2O crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.0518(12), b = 24.1010(15), c = 27.4976(14) A and beta = 103.973(3) degrees ; compound 5 crystallises in the monoclinic space group P2(1)/c with the lattice constants a = 25.256(5), b = 15.372(3), c = 21.306(4) A and beta = 113.96(3) degrees ; compound 6.0.5C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 15.1916(9), b = 15.2439(13), c = 22.487(5) A, alpha = 79.686(3), beta = 74.540(5) and gamma = 66.020(4) degrees ; compound 7.2C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 14.8295(12), b = 16.1523(13), c = 18.4166(17) A, alpha = 75.960(4), beta = 79.112(4) and gamma = 63.789(4) degrees ; and compound 8.3C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 17.2915(14), b = 18.383(2), c = 18.4014(18) A, alpha = 95.120(5), beta = 115.995(5) and gamma = 106.813(5) degrees . The molecular structures of the bismuth-rich compounds are related to the CaF2-type structure. Formally, the hexanuclear [Bi6O8]2+ fragment might be described as the central building unit, which is composed of bismuth atoms placed at the vertices of an octahedron and oxygen atoms capping the trigonal faces. Depending on the reaction conditions and the identity of R, the thermal decomposition of the hydrolysis products [Bi(n)O(l)(OH)(m-)(OSiR3)(3n-(2l-m))] gives alpha-Bi2O3, beta-Bi2O3, Bi12SiO20 or Bi4Si3O12.     

A kinetics and mechanistic study on the role of the structural rigidity of the linker on the substitution reactions of chelated dinuclear Pt(II) complexes

Substitution reactions of platinum complexes bearing cyclohexylamine/diamine moieties viz., [Pt(H(2)O)(N,N-bis(2-pyridylmethyl)cyclohexylamine)](CF(3)SO(3))(2), bpcHna; [{Pt(H(2)O)}(2)(N,N,N',N'-tetrakis(2-pyridylmethyl)-trans-1,4-cyclohexyldiamine)](CF(3)SO(3))(4), cHn and [{Pt(H(2)O)}(2)(N,N,N',N'-tetrakis(2-pyridylmethyl)-4,4'-dicyclohexylmethanediamine)](CF(3)SO(3))(4), dcHnm and phenylamine/diamine moieties viz., ([Pt(H(2)O)N,N-bis(2-pyridylmethyl)phenylamine)](CF(3)SO(3))(2), bpPha; [{Pt(H(2)O)}(2)(N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-phenyldiamine)](CF(3)SO(3))(4), mPh; [{Pt(H(2)O)}(2)(N,N,N',N'-tetrakis(2-pyridylmethyl)-1,4-phenyldiamine)](CF(3)SO(3))(4), pPh and [{Pt(H(2)O)}(2)(N,N,N',N'-tetrakis(2-pyridylmethyl)-4,4'-diphenylmethanediamine)](CF(3)SO(3))(4)), dPhm with thiourea nucleophiles were studied in acidified 0.01 M LiCF(3)SO(3) aqueous medium under pseudo-first-order conditions using stopped-flow and UV-visible spectrophotometric techniques. The rate of substitution follows a similar trend in the two sets of complexes and decreases in the order: bpcHna > dcHnm > cHn and bpPha > dPhm ≈ pPh ≈ mPh), respectively. The result of this study has shown that the rigidity and/or the planarity of a diamine bridge linking the two (2-pyridylmethyl)amine-chelated Pt(II) centres, influences the reactivity of the metal centres by protracting similar symmetry elements within the complexes, which determines the amount of steric influences felt on the coordination square-plane. Hence, the order of reactivity is controlled by both the steric hindrance and the magnitude of the trans σ-inductive effect originating from the linker towards the metal centre. These two factors also impact on the acidity of the complexes. The high negative entropies and low positive enthalpies support an associative mode of activation.     

Systematic exploration of a rutile-type zinc(II)-phosphonocarboxylate open framework: the factors that influence the structure

To systematically explore the assembly mechanism of a rutile-type open framework of {[Zn(3)(pbdc)(2)]·2H(3)O}(n) (3) (H(4)pbdc = 5-phosphonobenzene-1,3-dicarboxylic acid) constructed by 3-connected pbdc ligands and 6-connected Zn(3)(CO(2))(4)(PO(3))(2) secondary building units (Zn(3)-SBUs), three major factors including solvothermal procedures, types of solvents and amines, are taken into consideration. Seven novel structures, namely {[Zn(5)(pbdc)(2)(OH)(2)(H(2)O)(4)]·4H(2)O}(n) (1), {[Zn(3)(pbdc)(2)·H(2)O]·(Htea)·H(3)O·2-5(H(2)O)}(n) (2), {[Zn(3)(pbdc)(2)](H(3)O)(2)(dma)}(n) (4), {[Zn(2)(pbdc)(taea)]·3H(2)O}(n) (5), {[Zn(3)(pbdc)(2)(Hpda)(2)]·2H(2)O}(n) (6), {[Zn(5)(pbdc)(2)(Hpbdc)(2)]·2H(2)pz·9H(2)O}(n) (7), {[Zn(3)(pbdc)(2)]·Hpd·H(3)O·4H(2)O}(n) (8) are obtained. The results indicate that the layered-solvothermal method and the isopropanol solvent play crucial roles in the construction of the special anionic open framework of [Zn(3)(pbdc)(2)](2-). Changing these two factors led molecular assembly away from the rutile-type open framework. However, amines play a variable role in the framework, which means that by using appropriate amines, molecular assembly could generate the open framework of [Zn(3)(pbdc)(2)](2-) with pores decorated by amines. These results suggest a different approach towards decorating pores in anionic frameworks with precise structural information.     

Reactions of tetrafluoroethylene oligomers. Part 1. Some pyrolytic reactions of the pentamer and hexaher and of the fluorine adducts of the tetramer and pentamer

Pyrolyses of these highly branched fluorocarbons over glass beads caused the preferential thermolyses of CC bonds where there is maximum carbon substitution. Fluorinations of perfluoro-3,4-dimethylhex-3-ene (tetramer) (I) and perfluoro-4-ethyl-3,4-dimethylhex- 2-ehe (pentamer) (II) over cobalt (III) fluoride at 230° and 145° respectively afforded the corresponding saturated fluorocarbons (III) and (IV), though II gave principally the saturated tetramer (III) at 250°. Pyrolysis of III alone at 500—520° gave perfluoro-2-methylbutane (V), whilst pyrolysis of III in the presence of bromine or toluene afforded 2-bromononafluorobutane (VI) and 2H-nonafluorobutane (VII) respectively. Pyrolysis of perfluoro-3-ethyl-3, 4-dimethylhexane (IV) alone gave a mixture of perfluoro-2-methylbutane (V), perfluoro-2-methylbut-1-ene (VIII), perfluoro-3-methylpentane (IX), perfluoro-3,3-dimethylpentane (X), and perfluoro-3,4- dimethylhexane (III). Pyrolysis of IV in the presence of bromine gave (VI) and 3-bromo-3-trifluoromethyl-decafluoropentane (XI): with toluene, pyrolysis gare VlI and 3H-3-trifluoromethyldecafluoropentane (XII). Pyrolysis of II at 500° over glass gave perfluoro-1,2,3-trimethylcyclobutene (XIII) and perfluoro-2,3-dimethylpenta-1,3(E)- and (Z)-diene (XIV) and (XV) respectively. The diene mixture (XIV and XV) was fluorinated with CoF₃ to give perfluoro-2,3-dimethylpentane (XVI) and was cyclised thermally to give the cyclobutene (XIII). Pyrolysis of perfluoro-2- (1′-ethyl-1′-methylpropyl)-3-methylpent-1-ene (XVII) (TFE hexamer major isomer) at 500° gave perfluoro-1-methyl-2-(1′-methylpropyl)cyclobut-1-ene (XVIII) and perfluoro-2-methyl-2-(1′-methylpropyl)buta-1,3-diene (XIX). Fluorination of XVIII over CoF₃ gave perfluoro-1-methyl-2- (1′-methylpropyl)cyclobutane (XX), which on co-pyrolysis with bromine gave VI. XIX on heating gave XVIII. Reaction of XVIII with ammonia in ether gave a mixture of E and Z 1′-trifluoromethyl-2-(1′-trifluoromethyl- pentafluoropropyliden-1′-yl)tetrafluorocyclobutylamine (XXI) which on diazotisation and hydrolysis afforded 2-(2′trifluoromethyl- tetrafluorocyclobut-1-en-1′-yl)-octafluorobutan-2-ol (XXII).     

Trifluorosulfane ligand as an analogue of the nitrosyl ligand: highly exothermic fluorine transfer reactions from sulfur to metal in the chemistry of SF3 metal carbonyls of the first row transition metals

The variety of known very stable PF(3) metal derivatives analogous to metal carbonyls suggests the synthesis of SF(3) metal derivatives analogous to metal nitrosyls. However, the only known SF(3) metal complex is the structurally uncharacterized (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) synthesized by Cockman, Ebsworth, and Holloway in 1987 and suggested by electron counting to have a one-electron donor SF(3) group rather than a three-electron donor SF(3) group. In this connection, the possibility of synthesizing SF(3) metal derivatives analogous to metal nitrosyls has been investigated using density functional theory. The [M]SF(3) derivatives with [M] = V(CO)(5), Mn(CO)(4), Co(CO)(3), Ir(CO)(3), (C(5)H(5))Cr(CO)(2), (C(5)H(5))Fe(CO), and (C(5)H(5))Ni analogous to known metal nitrosyl derivatives are all predicted to be thermodynamically disfavored with respect to the corresponding [M](SF(2))(F) derivatives by energies ranging from 19.5 kcal/mol for Mn(SF(3))(CO)(4) to 5.4 kcal/mol for Co(SF(3))(CO)(3). By contrast, the isoelectronic [M]PF(3) derivatives with [M] = Cr(CO)(5), Fe(CO)(4), Ni(CO)(3), (C(5)H(5))Mn(CO)(2), (C(5)H(5))Co(CO), and (C(5)H(5))Cu are all very strongly thermodynamically favored with respect to the corresponding [M](PF(2))(F) derivatives by energies ranging from 64.3 kcal/mol for Cr(PF(3))(CO)(5) to 31.6 kcal/mol for (C(5)H(5))Co(PF(3))(CO). The known six-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) is also predicted to be stable relative to the seven-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(2)(SF(2)). Most of the metal SF(3) complexes found in this work are singlet structures containing three-electron donor SF(3) ligands with tetrahedral sulfur coordination. However, two examples of triplet spin state metal SF(3) complexes, namely, the lowest energy (C(5)H(5))Fe(SF(3))(CO) structure and a higher energy Co(SF(3))(CO)(3) structure, are found containing one-electron donor SF(3) ligands with pseudo square pyramidal sulfur coordination with a stereochemically active lone electron pair.     

Coordination and organometallic chemistry of relevance to the rhodium-based catalyst for ethylene hydroamination

The RhCl(3)·3H(2)O/PPh(3)/nBu(4)PI catalytic system for the hydroamination of ethylene by aniline is shown to be thermally stable by a recycle experiment and by a kinetic profile study. The hypothesis of the reduction under catalytic conditions to a Rh(I) species is supported by the observation of a high catalytic activity for complex [RhI(PPh(3))(2)](2). New solution equilibrium studies on [RhX(PPh(3))(2)](2) (X = Cl, I) in the presence of ligands of relevance to the catalytic reaction (PPh(3), C(2)H(4), PhNH(2), X(-), and the model Et(2)NH amine) are reported. Complex [RhCl(PPh(3))(2)](2) shows broadening of the (31)P NMR signal upon addition of PhNH(2), indicating rapid equilibrium with a less thermodynamically stable adduct. The reaction with Et(2)NH gives extensive conversion into cis-RhCl(PPh(3))(2)(NHEt(2)), which is however in equilibrium with the starting material and free Et(2)NH. Excess NHEt(2) yields a H-bonded adduct cis-RhCl(PPh(3))(2)(Et(2)NH)···NHEt(2), in equilibrium with the precursors, as shown by IR spectroscopy. The iodide analogue [RhI(PPh(3))(2)](2) shows less pronounced reactions (no change with PhNH(2), less extensive addition of Et(2)NH with formation of cis-RhI(PPh(3))(2)(NHEt(2)), less extensive reaction of the latter with additional Et(2)NH to yield cis-RhI(PPh(3))(2)(Et(2)NH)···NHEt(2). The two [RhX(PPh(3))(2)](2) compounds do not show any evidence for addition of the corresponding X(-) to yield a putative [RhX(2)(PPh(3))(2)](-) adduct. The product of C(2)H(4) addition to [RhI(PPh(3))(2)](2), trans-RhI(PPh(3))(2)(C(2)H(4)), has been characterized in solution. Treatment of the RhCl(3)·3H(2)O/PPh(3)/nBu(4)PI/PhNH(2) mixture under catalytic conditions yields mostly [RhCl(PPh(3))(2)](2), and no significant halide exchange, demonstrating that the promoting effect of iodide must take place at the level of high energy catalytic intermediates. The equilibria have also been investigated at the computational level by DFT with treatment at the full QM level including solvation effects. The calculations confirm that the bridge splitting reaction is slightly less favorable for the iodido derivative. Overall, the study confirms the active role of rhodium(I) species in ethylene hydroamination catalyzed by RhCl(3)·3H(2)O/PPh(3)/nBu(4)PI and suggest that the catalyst resting state is [RhCl(PPh(3))(2)](2) or its C(2)H(4) adduct, RhCl(PPh(3))(2)(C(2)H(4)), under high ethylene pressure.