Selective host-guest interaction of single-walled carbon nanotubes with functionalised fullerenes

Exohedrally functionalised fullerenes have been inserted in single-walled carbon nanotubes (SWNTs) with the aid of supercritical carbon dioxide to form peapods; C(61)(COOEt)(2) are encapsulated in SWNTs in high yield, whereas C(61)(COOH)(2) aggregate via hydrogen bonding to form a supramolecular complex, which sterically hinders encapsulation and causes it to adhere to the exterior surface of the SWNTs.     

豆荚型纳米材料C60@SWNTs的制备和表征

通过气相扩散的方法将C60填入单壁碳纳米管（SWNTs）,制备了豆荚型纳米材料C60@SWNTs,并利用高分辨电子显微镜（HRTEM）和拉曼光谱（Raman spectra）对其进行了表征.结果均证明C60以较高的比例填充入单壁碳纳米管中.HRTEM结果表明,填入单壁碳纳米管的C60之间的距离与面心立方C60晶体中C60之间的距离有细微的差别,说明C60分子与SWNTs间存在弱的范德华相互作用.此外,还观察到在电子束的照射下,C60在SWNT中两两聚合的现象.     

Entrapping of exohedral metallofullerenes in carbon nanotubes: (CsC60)n@SWNT nano-peapods

Exohedral C60-based metallofullerenes, CsC60, have been synthesized and successfully encapsulated into single-wall carbon nanotubes (SWNTs) in high yield by reducing C60 molecules into anions. High-resolution transmission electron microscopy (HRTEM) images and in situ electron energy loss spectroscopy (EELS) indicate that Cs atoms and C60 molecules align within SWNTs as CsC60 exohedral metallofullerenes, and that the formal charge state of encaged CsC60 is expressed as Cs+1C60-1. The present peapods with the exohedral metallofullerenes provide a new insight and the possibility to fine-tune the electronic and transport properties of carbon nanotubes.     

Azafullerenes encapsulated within single-walled carbon nanotubes

Methods of insertion of azafullerenes in single-walled carbon nanotubes (SWNTs) at different temperatures were investigated, while the effects of the conditions applied on the structure of azafullerene-based peapods, namely, C59N@SWNTs, were explored. Morphological characteristics of C59N@SWNTs were assessed and evaluated by means of high-resolution transmission electron microscopy (HR-TEM). Pathways and chemical reactions that occur upon encapsulation of C59N within SWNTs were evaluated. Monomeric azafullerenyl radical C59N. as inserted into SWNTs at high temperature, from purified (C59N)2 in the gas phase, can undergo a variety of different transformations forming dimers, oligomers or existing in its monomeric form inside SWNTs due to the stabilization effect by nanotube side walls. However, under milder conditions, that is, at lower temperature, bisazafullerene (C59N)2 can be inserted into SWNTs in its pristine dimeric form.     

Spectroelectrochemistry of carbon nanostructures.

This review is focused on charge-transfer reactions at carbon nanotubes and fullerenes. The spectroelectrochemistry of fullerenes deals with the spin states of fullerenes, the role of mono-anions and the reactivity of higher charged states in C60. The optical (Vis-NIR) spectroelectrochemistry of single-walled carbon nanotubes (SWNTs) follows changes in the allowed optical transitions among the Van Hove singularities. The Raman spectroelectrochemistry of SWNT benefits from strong resonance enhancement of the Raman scattering. Here, both semiconducting and metallic SWNTs are analyzed using the radial breathing mode (RBM) and G-modes as well as the second order (D, G') and intermediate frequency modes. Raman spectroelectrochemistry of SWNT allows the addressing of index-identified tubes and even single isolated nanotubes. Optical and Raman spectroelectrochemistry of fullerene peapods, C60@SWNT and C70@SWNT indicates effective shielding of the intratubular fullerene (peas). The most striking effect in the spectroelectrochemistry of peapods is the so-called "anodic Raman enhancement" of intratubular C60. Double-walled carbon nanotubes (DWNTs) give a specific spectroscopic response in Vis-NIR spectroelectrochemistry for the inner and the outer tube. They are better distinguishable by Raman spectroelectrochemistry which allows a precise tracing of the specific doping response of outer/inner tubes.     

Azafullerene encapsulated single-walled carbon nanotubes with n-type electrical transport property

Electrical transport properties of C60 and C59N encapsulated single-walled carbon nanotubes (SWNTs) are investigated by fabricating them as the channels of field effect transistor (FET) devices at room temperature. Their measurements indicate that C60@SWNTs exhibit the enhanced p-type characteristics compared with the case of pristine SWNTs, whereas C59N@SWNTs show the n-type behavior. The novel transport properties of peapods can be explained by the charge-transfer effect, which can modify the electronic structure of SWNTs.     

Immobilizing shortened single-walled carbon nanotubes (SWNTs) on gold using a surface condensation method

We propose a surface condensation method for assembling single-walled carbon nanotubes (SWNTs) on gold. The as-prepared long and randomly tangled SWNTs were cut into short pipes by chemical oxidation, allowing the nanotubes to be terminated by carboxyl functionalities. A surface condensation reaction was then performed by immersing an amino self-assembled monolayer (SAM)-modified gold substrate into the dimethylformamide suspension of carboxylic nanotubes with the aid of dicyclohexylcarbodiimide condensation agent. Raman spectroscopy and atomic force microscopy (AFM) results show that a highly aligned assembly of SWNTs has been formed on gold, with the nanotubes standing on the surface stable enough for a long ultrasonication. In combination with the microcontact printing (muCP) technique, we have fabricated patterned nanotube assemblies using this surface condensation method. Moreover, we found that the "giant" carbon nanotubes tend to form bundles on an amino-terminating surface, likely following a nucleation-growth model.     

Low-temperature growth of single-walled carbon nanotubes by water plasma chemical vapor deposition

Preferential growth of pure single-walled carbon nanotubes (SWNTs) over multi-walled carbon nanotubes (MWNTs) was demonstrated at low temperature by water plasma chemical vapor deposition. Water plasma lowered the growth temperature down to 450 degrees C, and the grown nanotubes were single-walled without carbonaceous impurities and MWNTs. The preferential growth of pure SWNTs over MWNTs was proven with micro-Raman spectroscopy, high-resolution transmission electron microscopy, and electrical characterization of the grown nanotube networks.     

Micelle-encapsulated carbon nanotubes: a route to nanotube composites

We report a general approach toward dispersing single-walled carbon nanotubes (SWNTs) in solvents and polymer materials, by encapsulating SWNTs within cross-linked micelles. Micelles made from polystyrene-block-poly(acrylic acid) (PS-b-PAA), an amphiphilic block copolymer, are first assembled around SWNTs by gradually adding H2O to a suspension of nanotubes in dimethylformamide. The hydrophilic, outer shells of these micelles are then chemically cross-linked with a difunctional linker molecule. Pure encapsulated SWNTs (e-SWNTs) can then be separated from empty cross-linked micelles by consecutive cycles of centrifugation and redispersion. Atomic force and transmission electron microscopies of the resulting nanostructures demonstrate that individual nanotubes (rather than bundles) have been completely encased in polymer shells whose thickness is slightly larger than that of empty micelles. e-SWNTs encapsulated in PS-b-PAA can be permanently redispersed in H2O, in organic solvents, and in both hydrophobic and hydrophilic polymer matrices with minimal sonication. Micelle encapsulation could improve the compositing of SWNTs in a wide variety of polymer materials for structural, electronic, and thermal applications.     

Diameter-selective solubilization of single-walled carbon nanotubes by reversible cyclic peptides

We have utilized reversible cyclic peptides (RCPs)-peptides containing alternating l- and d-amino acids with N- and C-termini derivatized with thiol-containing groups allowing reversible peptide cyclization-to solubilize and noncovalently functionalize carbon single-walled nanotubes (SWNTs) in aqueous solution. Solubilization occurs through wrapping of RCPs around the circumference of a SWNT, followed by the formation of head-to-tail covalent bonds, yielding closed rings on the nanotubes. By controlling the length of the RCPs, we have demonstrated limited diameter-selective solubilization of the SWNTs as revealed by UV/vis/NIR and Raman spectroscopies, as well as atomic force microscopy.     

Protonation of carbon single-walled nanotubes studied using 13C and 1H-13C cross polarization nuclear magnetic resonance and Raman spectroscopies

The reversible protonation of carbon single-walled nanotubes (SWNTs) in sulfuric acid and Nafion was investigated using solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies. Magic-angle spinning (MAS) was used to obtain high-resolution 13C and 1H-13C cross polarization (CP) NMR spectra. The 13C NMR chemical shifts are reported for bulk SWNTs, H2SO4-treated SWNTs, SWNT-Nafion polymer composites, SWNT-AQ55 polymer composites, and SWNTs in contact with water. Protonation occurs without irreversible oxidation of the nanotube substrate via a charge-transfer process. This is the first report of a chemically induced change in a SWNT 13C resonance brought about by a reversible interaction with an acidic proton, providing additional evidence that carbon nanotubes behave as weak bases. Cross polarization was found to be a powerful technique for providing an additional contrast mechanism for studying nanotubes in contact with other chemical species. The CP studies confirmed polarization transfer from nearby protons to nanotube carbon atoms. The CP technique was also applied to investigate water adsorbed on carbon nanotube surfaces. Finally, the degree of bundling of the SWNTs in Nafion films was probed with the 1H-13C CP-MAS technique.     

Experimental and Computational Investigations of the Properties of Fluorinated Single‐Walled Carbon Nanotubes

Fluorination of single‐walled carbon nanotubes by reaction with elemental fluorine at elevated temperatures provides fluorinated single‐walled carbon nanotubes (F‐SWNT), which have the highest degree of functionalization (up to F/C=1/2) of any derivatized carbon‐nanotube material reported to date. Also, F‐SWNTs have received more scrutiny than any other functionalized carbon nanotubes. This Minireview covers experimental and computational investigations of F‐SWNTs with a focus on the nature and the strength of the C–F linkage.     

Sidewall carboxylic acid functionalization of single-walled carbon nanotubes

The reactions of single-walled carbon nanotubes (SWNTs) with succinic or glutaric acid acyl peroxides in o-dichlorobenzene at 80-90 degrees C resulted in the addition of 2-carboxyethyl or 3-carboxypropyl groups, respectively, to the sidewalls of the SWNT. These acid-functionalized SWNTs were converted to acid chlorides by derivatization with SOCl(2) and then to amides with terminal diamines such as ethylenediamine, 4,4'-methylenebis(cyclohexylamine), and diethyltoluenediamine. The acid-functionalized SWNTs and the amide derivatives were characterized by a set of materials characterization methods including attenuated total reflectance (ATR) FTIR, Raman and solid state (13)C NMR spectroscopy, transmission electron microscopy (TEM), and thermal gravimetry-mass spectrometry (TG-MS). The degree of SWNT sidewall functionalization with the acid-terminated groups was estimated as 1 in 24 carbons on the basis of TG-MS data. In comparison with the pristine SWNTs, the acid-functionalized SWNTs show an improved solubility in polar solvents, for example, alcohols and water, which enables their processing for incorporation into polymer composite structures as well as for a variety of biomedical applications.     

Single-walled carbon nanotubes filled with M OH (M = K, Cs) and then washed and refilled with clusters and molecules

Heating single-walled carbon nanotubes (SWNTs) with molten hydroxides MOH (M = K, Cs) gave MOH@SWNT in good yield; high resolution transmission electron microscopy (HRTEM) indicated that CsOH in CsOH@SWNT often adopts twisted 1D crystal structures inside SWNTs; treating MOH@SWNT with water at room temperature removes the soluble hydroxide filling and the resulting SWNTs may then be filled using aqueous solutions of uranyl acetate or uranyl nitrate at rt giving SWNTs filled with UO(2) clusters and uranyl acetate molecules.     

Lithium storage in single-walled carbon nanotubes

Here, we investigated the lithium insertion/extraction mechanism in single-walled carbon nanotubes (SWNTs) based both on the empty SWNTs and filled SWNTs, including ferrocene-filled SWNTs (Fc@SWNTs) and C₆₀-filled SWNTs (C₆₀@SWNTs). SWNTs, C₆₀@SWNTs and Fc@SWNTs were systematically investigated as anode materials for Li-ion batteries. The electrochemical performance of the C₆₀@SWNT electrode was slightly better than that of the SWNTs, and the reversible capacity of Fc@SWNTs per unit weight was ～1.7 times greater than that of the empty SWNTs due to its special tube internal structure. It was proved that the dominant reversible sites for lithium storage in empty SWNTs are the trigonal interstitial channels. Meanwhile, lithium can reversibly insert or extract the inner channels of the tubes after doping with ferrocene; the reversible capacity presented in the inner channels of Fc@SWNTs is about Li_1.13C₆.     

Atomic Force Microscopic and Electrochemical Investigations of an Electrostatically Fabricated Single‐Wall Carbon Nanotubes Modified Electrode

Single‐wall carbon nanotubes (SWNTs) sub‐monolayer film has been prepared by simply electrostatically adsorbing nanotubes onto a 2‐aminoethanethiol self‐assembled monolayer (SAM) on a gold bead electrode. Tapping‐mode atomic force microscopy (TM‐AFM) is used to characterize the SWNT film, which exhibits that the orientation of SWNTs on the SAM is horizontal and the surface coverage is quite low. The SWNTs modified electrode shows nearly ideal electrochemical response to Fe(CN) /Fe(CN) redox probe. The electrode with such a low SWNTs coverage, however, shows good electrocatalytic behavior to cytochrome c.     

Effects of SWNT and metallic catalyst on hydrogen absorption/desorption performance of MgH2

The microstructure and absorption/desorption characteristics of composite MgH2 and 5 wt % as-prepared single-walled carbon nanotubes (MgH2-5ap) obtained by the mechanical grinding method were investigated. Experimental results show that the MgH2-5ap sample exhibits faster absorption kinetics and relatively lower desorption temperature than pure MgH2 or MgH2-purified single-walled carbon nanotube composite. Storage capacities of 6.0 and 4.2 wt % hydrogen for the MgH2-5ap composite were achieved in 60 min at 423 and 373 K, respectively. Furthermore, its desorption temperature was reduced by 70 K due to the introduction of as-prepared single-walled carbon nanotubes (SWNTs). In addition, the different effects of SWNTs and metallic catalysts contained in the as-prepared SWNTs were also investigated and a hydrogenation mechanism was proposed. It is suggested that metallic particles may be mainly responsible for the improvement of the hydrogen absorption kinetics, and SWNTs for the enhancement of hydrogen absorption capacity of MgH2.     

Vertical array growth of small diameter single-walled carbon nanotubes

A hot filament chemical vapor deposition method has been developed to grow vertical array single-walled carbon nanotubes (SWNTs). In this study, a hot filament (temperature greater than 2000 degrees C) was used to activate gas mixtures of hydrogen and carbon containing species at sub-atmospheric pressures. Silicon substrates decorated with islands of iron were directly inserted into a preheated furnace in which a hot filament is activating the gas. Vertical arrays of SWNTs are produced with diameters ranging from 0.78 to 1.6 nm. The samples were characterized with Raman and fluorescence spectroscopy and SEM and TEM microscopy.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

High-speed countercurrent chromatography for purification of single-walled carbon nanotubes

A new chromatographic purification of single-walled carbon nanotubes using high-speed countercurrent chromatography is reported. The purification was accomplished on the basis of experiment that dispersed the single-walled carbon nanotubes with sodium dodecyl sulfate, and the result mixture was separated using the two phase system composed of n-butanol/water = 1/1 （v/v）. The sizes of SWNTs separated were observed by scanning electron microscopy. The results demonstrated that the high-speed countercurrent chromatography possessed a good efficency for purification of single-walled carbon nanotubes.