Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility (SSRF)booster ring, a full energy injector for the storage ring, is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping. Closed orbit distortion (COD) caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting. Considering the affections of random errors in measurement, both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5 is given as the final installation sequence of the booster bending magnets in this paper.     

CSNS/RCS引出系统快脉冲冲击磁铁的磁场仿真和结构设计

中国散裂中子源快循环同步加速器引出系统快脉冲冲击磁铁,由分组安装于三个真空箱内的8台磁铁组成。对冲击磁铁进行磁场仿真和结构设计,并使用仿真软件进行优化。仿真结果表明:磁铁中心场60%宽度内的磁场均匀性达到0.7%,满足物理设计要求。同时,对两台磁铁间距大小与互感的关系进行模拟计算和分析。磁铁结构设计中,针对原样机中出现的铁芯不能可靠固定问题,进行修改和完善,并且设计出了一种简单实用的多螺栓滑动支撑结构,可使多台磁铁平稳推入真空箱内,同时完成多台磁铁的准直和固定。     

磁爆加载下强磁体的磁场研究

 为了研究磁爆压缩发生器加载下强磁体形成的磁场,对磁爆加载过程进行分析,建立了磁爆加载下强磁体形成磁场的理论模型。按照此模型,对6种不同结构强磁体的磁场进行对比研究,得到了强磁体的磁场变化规律。结果表明：在加载初始阶段,磁爆压缩发生器的自身参数为主要影响因素,各磁体的磁场峰值和范围差别较小;在磁通压缩阶段,电路过程的改变使得磁体结构的影响逐渐显著,各磁体的磁场峰值和范围发生了明显变化;磁体结构对磁场的空间分布具有决定性作用,磁场分布不受加载过程的影响。     

单边磁共振成像仪磁体系统研究

单边磁共振成像（MRI）系统由于其良好的开放性引起了越来越多的关注,这种系统的成像样品区位于磁体外侧,其形状为薄片形,其磁体结构设计是一个全新的问题. 本文基于鞍点理论,探索这种单边磁体在其外侧产生均匀样品区的可行性,通过对几种单边磁体结构磁场特性的研究,指出适当设计的永磁磁体能够在磁体外侧产生鞍点. 最后给出一种符合成像要求的单边永磁MRI磁体结构. 单边MRI磁体结构的可行性分析及磁体结构的成功设计,为开展完全开放式磁共振成像装置的研究打下了坚实的基础.     

用于长城等古建筑探测的NMR探测器的磁体设计

以万里长城为代表的古建筑是世界瑰宝,更是中华民族的象征和骄傲.本文提出利用便携式核磁共振（NMR）装置来探测研究这类古建筑的建筑材料,在不对其造成损伤的基础上,发掘其隐含的科学、技术和工程相关的丰富信息.为此,作为第一步,设计了适合于探测这类古建筑的便携式单边NMR探测器组合式磁体.该探测器的磁体结构以semi-Halbach为基础,通过不同磁体模块间的组合得到对应移动探测模式、长距离探测模式和均匀磁场探测模式的磁体结构.随后根据优化结果,设计加工了磁体组件,并采用该磁体进行了流体、长城城砖和现代红砖的NMR实验,实测结果与模拟一致.该组合式磁体的优点在于通过不同磁体模块组合,实现了多种探测方式,适用于探测长城等这类古建筑物需要多种探测模式的科学研究.     

EAST超导托卡马克装置中的大型超导磁体技术

随着大型超导核聚变装置、超导储能装置、超导强磁场装置及高能超导加速器技术参数的不断提高，大型超导磁体的应用也在加速发展中．大型超导磁体的场强较高、储能较大，对导体的结构、磁体结构、绝缘结构、制造工艺等要求与通常小型超导磁体有很大的不同．本文旨在对国家重大科学工程项目“EAST（HT-7U）超导托卡马克核聚变实验装置”的大型超导磁体关键技术作一介绍．     

永磁体外部磁场的不均匀性研究

从永磁体的分子电流观点、退磁场、工艺等出发, 以矩形永磁体为例, 从理论上分析了影响永磁体外部磁场不均匀性的各种因素.研究结果表明, 永磁体外部磁场宏观不均匀性(好场区均匀度和面积相对大小) 和空间距离及永磁体的外形设计密切相关. 退磁场对永磁体外部磁场微观不均匀性有着复杂影响. 永磁体工艺如粉末颗粒、取向度、烧结凝固、机械加工等将影响永磁体外部磁场的不均匀性, 如磁化偏角、对称性、光滑性等. 关键词： 永磁体 外部磁场 不均匀性 退磁场     

Permanent magnet applications

Rare-earth permanent magnets are ideally suited to generate magnetic fields comparable to their spontaneous polarization J_S. Near-square hysteresis loops and large values of the coercivity and anisotropy fields greatly simplify magnet design, as each magnet block is effectively transparent to the magnetic fields produced elsewhere in the magnet assembly. The fields generated by compact and efficient magnet structures requiring no continuous expenditure of energy can be static or variable, uniform or nonuniform. Permanent magnets are fully competitive with electromagnets for fields up to 2 T, and fields as high as to 5 T can be produced in a small volume. When a field with a rapid spatial variation is required, permanent magnets may offer the only practicable solution. Both permanent magnet structures and the uses to which they are put are reviewed, classifying the magnet applications in terms of the nature of the field, the effect on the magnet and the physical effect exploited.     

Effects of Arbitrarily Directed Field on Spin Phase Oscillations in Biaxial Molecular Magnets

Quantum phase interference and spin-parity effects are studied in biaxial molecular magnets in a magnetic field at an arbitrarily directed angle.The calculations of the ground-state tunnel splitting are performed on the basis of the instanton technique in the spin-coherent-state path-integral representation,and complemented by exactly numerical diagonalization.Both the Wentzel-Kramers-Brillouin exponent and the pre-exponential factor are obtained for the entire region of the direction of the field.Our results show that the tunnel splitting oscillates with the field for the small field angle,while for the large field angle the oscillation is completely suppressed.This distinct angular dependence,together with the dependence of the tunnel splitting on the field strength,provides an independent test for spin-parity effects in biaxial molexular magnets.The analytical results for the molecular Fes magnet are found to be in good agreement with the numerical simulations,which suggests that even the molecular magnet with total spin S=10 is large enough to be treated as a giant spin system.     

Measurement of the magnetic-field parameters of the NICA Booster dipole magnet

Serial assembly and tests of dipole and quadrupole magnets of the NICA Booster have started at the Laboratory of High Energy Physics of the Joint Institute for Nuclear Research (JINR). The accelerator is fitted with Nuclotron-type magnets with a superconducting winding and an iron yoke for shaping the needed magnetic field. The design of magnets for NICA was optimized (based on the experience gained in constructing and operating the JINR Nuclotron) for the production of magnetic fields of the required configuration in terms of the beam dynamics in the accelerator and the collider. Measurements of parameters of the field of each magnet are expected to be performed in the process of assembly and testing of each module of the magnet-cryostat system of the NICA Booster and Collider. The results of magnetic measurements for the NICA Booster dipole magnet are presented.     

混合型波荡器的3维优化

 以波荡器辐射波和共振电子能及混合型波荡器的解析计算为基础，通过3维磁场的有限元计算，在欧洲光源横向优化基础上，给出了同步辐射和自由电子激光用混合型波荡器纵向优化参数，进而给出了用于DUV FEL混合型波荡器的设计计算参数。加侧位和顶部永磁块后，峰值磁场分别提高到0.722T和0.773T，辅助以1μm量级分辨率的磁间隙调节机械系统，磁场分辨率好于10^-4T量级。     

An open magnet utilizing ferro-refraction current magnification

Ferro-refraction is the field magnification that is obtained when a current segment is near a high magnetic permeable boundary. It is shown that ferro-refraction may be used in the design of magnets for NMR or MRI to increase the efficiency of these magnets. The field may be modeled analytically with the Biot--Savart law and the inclusion of mirror image currents. Ferro-refraction is particularly useful in the design of monohedral magnets, magnets producing a remote homogeneous region which have the magnetic sources arranged to one side. These magnets have also been called planar magnets. Two designs for a monohedral magnet which produce good agreement between experimental and analytic results are presented.     

轴对称高场超导磁体电磁应力有限元分析方法

核磁共振成像和核磁共振谱仪是高场超导磁体的主要应用领域.高场超导磁体通常具有较高的磁场和运行电流,在运行过程中超导线会产生较高的电磁应力,其临界特性将发生退化,影响磁体的稳定性.开展高场超导磁体的电磁应力精确分析显得尤为必要.本文发展了一种快速有效的有限元分析方法,第一步,为整个超导磁体系统建立平均有限元模型,采用传统的电磁-结构耦合方法求解电磁应力,获得最大应力位置;第二步,对最大应力所在的超导线圈建立详细有限元模型,采用单积分-结构分析方法精确求解每一组分中电磁应力.基于该模型研究了500 MHz NMR超导磁体的电磁应力.该分析方法也可以用于超导磁体冷却过程中的热应力分析.为高场超导磁体设计和建造提供有益的理论依据.     

放电过程中脉冲磁体的热传导

 对脉冲磁体放电过程中的热传导进行理论分析与实验测试,结果表明：对于短脉冲磁体,采用绝热模型与考虑热传导后的模型所得计算结果相近,并且二者均与实验测量得到的结果相符;对于长脉冲磁体,由于热传导时间相对较长,绝热模型计算得到的温升与考虑热传导后模型得到的温升有较大差别。通过理论分析可知：无论是短脉冲磁体还是长脉冲磁体,放电过程中的热传导只对磁体温升分布有较大影响,而对磁场波形则几乎没有影响。     

基于ANSYS的超导磁体机械结构的应力应变分析

为合理设计超导磁体机械结构,保证磁体正常运行,机械结构的应力分析在磁体设计中起到非常重要的作用.借助于ANSYS有限元分析软件,给出一了个5T超导磁体机械结构的受力分析,讨论了超导磁体内部电磁力对不同材料的机械结构所产生的应力和应变.结果表明,由磁体内部电磁力引起的机械结构的最大应力和应变,出现在磁体芯筒的中间部位,最...     

辅助永磁体厚度对单畴GdBCO超导体捕获磁场分布及其磁悬浮力的影响

研究了两种磁悬浮系统组态中圆台形辅助永磁体厚度对高温超导体捕获磁场和超导磁悬浮力的影响。结果表明,圆台形辅助永磁体的下表面和GdBCO超导体上表面同处在一个水平面上,磁化用圆台形辅助永磁体的厚度H从5 mm增加到45 mm时,超导体捕获磁场和磁悬浮力与圆台形辅助永磁体的厚度直接相关。（1）当圆台形辅助永磁体的北极垂直向上且用液氮冷却后移除辅助永磁体时,最大磁悬浮力从21.8 N增大到26.5 N,再减小到22.9 N;（2）当圆台形辅助永磁体的北极垂直向下且用液氮冷却后移除辅助永磁体时,最大磁悬浮力从20.5 N减小到11.9 N ,再增加到20.4 N;（3）两种磁悬浮系统组态中最大磁悬浮力不一致,与零场冷情况下的最大磁悬浮力14.6 N也不同。在超导磁悬浮应用系统设计中,只有科学选择辅助永磁体形状和尺寸,合理设计组合方式,才能获得较强的磁场强度,提高超导磁悬浮力特性,该结果对促进高温超导体的实际应用具有重要的指导作用。     

Stabilization of a movable magnet in the field of a stationary one by rotation

It is shown that a rotating body containing a permanent magnet may be in stable noncontact equilibrium when placed in the field of a stationary magnet. It is assumed that the magnets are of a cylindrical shape and their magnetizations are aligned with the cylinder axis. The field of the magnets is simulated by two turns with direct current, which makes it possible to analytically find the forces and force moments acting on the movable magnet subjected to the field of the stationary one. Instability of the equilibrium state of a suspended body when its weight is counterbalanced by the repulsive force exerted by a stationary magnet follows from the Earnshaw theorem. It is demonstrated here that such instability may be removed with gyroscopic forces due to rotation of the suspended body. It turns out that the rotation of the movable magnet may stabilize not only its unstable angular but also translational degrees of freedom, which is a newly discovered effect.     

A simple, small and low cost permanent magnet design to produce homogeneous magnetic fields

A new portable, pocket-size NMR probe based on a novel permanent magnet arrangement is presented. It is based on a Halbach-type magnet design which mimics the field of a spherical dipole by using cylindrical bar and ring magnets. The magnet system is made up of only three individual magnets, and most field calculations and optimisations can be performed analytically. A prototype system has been built using a set of small, off the shelf commercially available permanent magnets. Proton linewidths of 50 ppm FWHM could be achieved at a field strength of 1T. Calculations show that with custom-sized permanent magnets, linewidths of less than 1 ppm can be achieved over sample volumes of up to 1 mm3, which would in theory enable chemical shift resolved proton spectroscopy on mass-limited samples. But even with the achieved linewidth of 50 ppm, this can be a useful portable sensor for small amounts of liquid samples with restricted molecular mobility, like gels, polymers or high viscosity liquids.     

兰州重离子治癌装置同步加速器切割磁铁研制

切割磁铁作为同步加速器注入引出的关键部件之一,对磁场及切割板结构都有严格的要求。介绍了兰州重离子治癌装置(HIMM)同步加速器切割磁铁的设计情况,基于磁场优化软件OPERA,对切割磁铁磁场均匀度及杂散场的分布进行了详细的分析。根据磁场要求优化结构设计,完成了磁铁的加工。磁场测量结果分析显示,有效场区范围内磁场均匀度优于设计结果。同时通过对磁铁端部屏蔽处理,在环内侧管道处杂散磁场降到2mT以内,满足物理设计要求。