大同烟煤增压富氧燃烧过程中硫、氯和氟的析出特性

利用高压热重结合傅里叶红外研究了大同烟煤在增压富氧燃烧过程中硫、氯和氟的释放行为,主要考察压力对其析出特性的影响。实验结果表明,压力的改变对煤中硫、氯和氟的迁移转化均有显著影响。随着压力的升高,黄铁矿硫向COS等中间产物的转化率逐渐增加,导致SO2的收率逐步上升,但在3 MPa时,燃煤SO2收率却有所降低。此外,压力升高后反应气氛中CO分压的增加促进了COS的生成,导致其收率逐渐上升。因为煤中有机氯析出和转化与挥发分的释放密切相关,所以高压下挥发分释放量的增加使得煤中有更多的有机氯析出并转化为HCl,而且压力升高后,挥发分燃烧速率和温度的升高促进了无机氟化物分解,HF生成量相应增加。此外,高压下水解反应的强化也提高了HF的收率。     

Temperature dependence of the rate of formation of active species in nanosecond streamer corona discharge between a solid electrode and water surface

The dependence of the yield of ozone in a nanosecond streamer electric corona discharge in the presence of oxygen and water vapor on temperature over the range 25–66°C was examined. It was found that the yield decreased to zero with an increase in temperature to 66°C. The decrease in the yield can be explained in terms of an increase of water vapor concentration in the discharge gap at elevated temperatures, as well as by an increase in the water ionization constant.     

合成1,2-环十二二酮的新方法

以十二烷二酸（１）为原料,与甲醇酯化生成十二烷二酸二甲酯（２）,收率为８６５％。化合物２经偶联 缩合得１,２ 二三甲基硅氧基环十二烯（３）,收率为６３１％。利用溴氧化化合物３得到１,２ 环十二二酮（４）淡黄色晶体,收率７９％,全过程收率达４３.１％,是合成１,２ 二酮的新方法。目标化合物结构经红外光谱、核磁共振氢谱和碳谱表征确认。     

A facile synthesis of phytosphingosine from diisopropylidene-D-mannofuranose

In the present study, an efficient method with a high overall yield for preparing phytosphingosine and an analogue was developed. Starting with commercially available 2,3;5,6-di-O-isopropylidene-d-mannofuranose, a variety of lipid moieties were incorporated to obtain phytosphingosine and an analogue. Through an eight-step manipulation, phytosphingosine was obtained with an overall yield of 57%.     

Static Yield Stress of an Electro-Rheological Fluid

The static yield stress of an electro-rheological fluid (starch/gas-oil and mesophase-carbon/gas-oil, abbreviated as ERF), congealed by an electric field, has been examined by means of a tensile tester with parallel electrodes. Static yield stress showed different behavior from dynamic yield stress reported by many investigators: thus static yield stress is proportional to applied field strength, but not to the square of it, as is dynamic yield stress. The adhesive force between the particles was not Coulomb's force but Maxwell's force. The theory of McLean and Ikazakiet al.using the Johnsen–Rahbeck effect on the adhesive force of the dust pile on an electrode of the electro-static precipitator was applied and the deduced equation actually explained the phenomena. It was clarified experimentally and theoretically that the physical properties of the ERF particles had no effect on the adhesive force of the pearl chains of a congealed ERF; on the contrary, the volumetric concentration did affect it.     

Investigation of the maximum quantum yield of PS II in Haematococcus pluvialis cell cultures during growth: effects of chemical or high-intensity light treatment

In this study, we investigated the increase in photosynthetic quantum yield that occurs in advance of increased microalgal growth. Haematococcus pluvialis was cultivated under normal conditions; the number of cells, the maximum quantum yield of photosystem II (F(v)/F(m)), and optical density were measured. We observed an increase in F(v)/F(m) approximately 72h prior to the cell growth phase. To confirm the relationship between photosynthetic yield and growth, samples were treated with several chemicals under high-intensity light illumination and control conditions to inhibit photosystem II and induce a decrease in the quantum photosynthetic yield. The samples were exposed to high-intensity light at an irradiance of 400μmol photonsm(-2)s(-1) for varied amount of time and were treated with chemicals such as 3-(3,4-dichlorophenyl)-1,1-dimethylurea, nigericin sodium salt and valinomycin. We observed that both the photooxidation of photosystem II reaction centers and the formation of transmembrane electrochemical gradients led to an initial decrease in fluorescence yield after the onset of high-intensity light illumination. We also observed that treatment of high-intensity light illuminated cells with antibiotics after adaptation to moderate light intensities caused a difference in photosynthetic activity. In conclusion, the maximum quantum yield of photosystem II is obtained prior to the cell growth phase and can therefore be used as a prediction parameter for cell growth.     

Double yielding in PA6/TPV‐MAH blends: Effect of crosslinking degree of the dispersed phase

Thermoplastic vulcanizates (TPVs) based on PP and EPDM (the ratio is 5:5) with different crosslinking degrees were prepared using different contents of phenolic resins, and then blended with polyamide 6 (PA6). The results indicated that with an increase in crosslinking degree, the double yielding phenomenon in PA6/TPV blends became more distinct, the yield stress of the first yield point and the yield stress difference of the two yield points decreased; however, the yield strain of the first yield point did not change with the increasing crosslinking degree of the TPV, but the yield strain of the second yield point increased, resulting in a more broadened yield region. The SEM results showed that with an increase in the crosslinking degree of TPV, the diameter of TPV increased in the core layer, and the orientation degree of TPV in the skin and subskin layer deceased, accompanying with a decrease of the ratio of length to diameter (L/D) of the droplets. The morphology evolution of the PA6/TPV blend during the tensile test was also studied, and the results agreed well with the model we proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 912–922, 2009     

Total synthesis of the tricyclic marine alkaloids (-)-lepadiformine, (+)-cylindricine c, and (-)-fasicularin via a common intermediate formed by formic acid-induced intramolecular conjugate azaspirocyclization

A very short and efficient enantioselective total synthesis of the tricyclic marine alkaloids (-)-lepadiformine (3), (+)-cylindricine C (1c), and (-)-fasicularin (4) has been developed utilizing the formyloxy 1-azaspiro[4.5]decane 5 as a common intermediate. The key strategic element for the synthesis was the formic acid-induced intramolecular conjugate azaspirocyclization, which proved to be a highly efficient and stereoselective way to rapid construction of the 1-azaspirocyclic substructure of these natural products in a single operation. Thus, the common intermediate 5, synthesized in two steps with 70% overall yield starting from the known (S)-N-Boc-2-pyrrolidinone 7 via the conjugate spirocyclization using an acyclic ketoamide 6, was utilized for the concise and stereoselective total synthesis of (-)-lepadiformine (3), which was accomplished in seven steps with 45% overall yield from 5 (31% yield from 7). The developed strategy based on the conjugate spirocyclization was also applied to the stereoselective total synthesis of (+)-cylindricine C (1c), which was achieved in 10 steps from 5 in 18% overall yield (12% yield from 7). Further application of this approach using 5 led to the synthesis of (-)-fasicularin (4), wherein an extremely efficient method for the introduction of the thiocyanato group via an aziridinium intermediate at the last step was developed. Thus, the highly efficient first enantioselective total synthesis of (-)-fasicularin was accomplished in nine steps with an overall yield of 41% from 5 (28% yield from 7).     

A mechanistic study of photocyanation of pyrene in oil-in-water emulsion systems

A highly efficient one-step photocyanation reaction of pyrene was shown to proceed in oil-in-water emulsion systems. As a typical example, photoirradiation of pyrene in the presence of 1,4-dicyanobenzene and NaCN in a benzonitrile/water mixture (1/100, vol %) under vigorous stirring gave 1-cyanopyrene in a conversion yield of 83%, while an analogous reaction in an acetonitrile/water mixture (9/1, vol %) yielded this product in 61% yield. We evaluated the quantum yield of photocyanation in the oil-in-water emulsion system to be 0.17. Under optimum conditions, the quantum yield was improved to 0.68. Characteristics and possible mechanisms of the photocyanation reaction are discussed in detail.     

An enantioselective synthesis of (+)-polyoxamic acid via phase-transfer catalytic conjugate addition and asymmetric dihydroxylation

A new enantioselective synthetic method of (+)-polyoxamic acid is reported. (+)-Polyoxamic acid could be obtained in 7 steps with 46% overall yield from diphenylmethyl-glycineimine tert-butyl ester via an enantioselective phase-transfer conjugate addition (99% yield, 96% ee) and an asymmetric dihydroxylation (98% yield, 94% de) as the key reactions.     

Photoinduced DNA end capping via N3-methyl-5-cyanovinyl-2'-deoxyuridine

A modified oligodeoxynucleotide (ODN) containing N(3)-methyl-5-cyanovinyl-2'-deoxyuridine reacts by photoirradiation at 366 nm with an adenine residue of a complementary template ODN to yield an end-capped ODN in 87% yield.     

Graft copolymerization onto rubber. V. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydiphosphate as initiator

The graft copolymerization of methyl methacrylate onto natural rubber (NR) is investigated using potassium peroxydiphosphate as the initiator. The rate of grafting is determined by varying monomer concentration, peroxydiphosphate concentration, and temperature. The graft yield increased with an increase in monomer concentration up to 1.4082M/L and thereafter the graft yield decreases. The graft yield increases significantly with an increase of peroxydiphosphate concentration up to 150 X 10^-1M/L and thereafter the graft yield decreases. The grafting reaction is temperature dependent. A suitable kinetic scheme is proposed and the rate equation is evaluated.     

An investigation of enhanced secondary ion emission under Au n + (n=1–7) bombardment

We investigate the mechanism of the nonlinear secondary ion yield enhancement using Au(n)+ (n = 1, 2, 3, 5, 7) primary ions bombarding thin films of Irganox 1010, DL-phenylalanine and polystyrene on Si, Al, and Ag substrates. The largest differences in secondary ion yields are found using Au+, Au2+, and Au3+ primary ion beams. A smaller increase in secondary ion yield is observed using Au5+ and Au7+ primary ions. The yield enhancement is found to be larger on Si than on Al, while the ion yield is smaller using an Au+ beam on Si than on Al. Using Au(n)+ ion structures obtained from Density Functional Theory, we demonstrate that the secondary yield enhancement is not simply due to an increase in energy per area deposited into the surface (energy deposition density). Instead, based on simple mechanical arguments and molecular dynamics results from Medvedeva et al, we suggest a mechanism for nonlinear secondary ion yield enhancement wherein the action of multiple concerted Au impacts leads to efficient energy transfer to substrate atoms in the near surface region and an increase in the number of secondary ions ejected from the surface. Such concerted impacts involve one, two, or three Au atoms, which explains well the large nonlinear yield enhancements observed going from Au+ to Au2+ to Au3+ primary ions. This model is also able to explain the observed substrate effect. For an Au+ ion passing through the more open Si surface, it contacts fewer substrate atoms than in the more dense Al surface. Less energy is deposited in the Si surface region by the Au+ primary ion and the secondary ion yield will be lower for adsorbates on Si than on Al. In the case of Au(n)+ the greater density of Al leads to earlier break-up of the primary ion and a consequent reduction in energy transfer to the near-surface region when compared with Si. This results in higher secondary ion yields and yield enhancements on silicon than aluminum substrates.     

Grafting vinyl monomers onto silk fibers. IX. Graft copolymerization of methyl methacrylate onto silk using peroxydiphosphate-thiourea redox system

The graft copolymerization of methyl methacrylate (MMA) onto silk in aqueous media initiated by the potassium peroxydiphosphate-thiourea redox system was studied at 50°C. The rate of grafting was determined by changing [monomerl], [thiourea], [initiator], acidity of the medium, reaction medium, and temperature. A significant increase percent of grafting was noticed with increasing monomer concentration to 84.49 × 10^?2 mole/liter and the further increase is associated with the decrease of graft yield. The graft yield increases with an increase of thiourea (Tu) concentration to 25 × 10^?5 mole/liter; then it decreases. A measurable increase in graft yield was observed with an increase in acidity of the medium. Graft yield increases to a certain temperature, i.e., 50°C, and then it decreases. The graft yield increases with an increase of initiator concentration to 60 × 10^?4 mole/liter; then it decreases. The graft yield is medium dependent. A suitable kinetic path has been proposed and the rate equation has been derived.     

Gamma-ray yield dependence on bulk density and moisture content of a sample of a PGNAA setup: A Monte Carlo study

Monte Carlo calculations were carried out to study the dependence of γ-ray yield on the bulk density and moisture content of a sample in a thermal-neutron capture-based prompt gamma neutron activation analysis (PGNAA) setup. The results of the study showed a strong dependence of the γ-ray yield upon the sample bulk density. An order of magnitude increase in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in a Portland cement sample was observed for a corresponding order of magnitude increase in the sample bulk density. On the contrary the γ-ray yield has a weak dependence on sample moisture content and an increase of only 20% in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in the Portland cement sample was observed for an order of magnitude increase in the moisture content of the Portland cement sample. A similar effect of moisture content has been observed on the yield of 1.167 MeV prompt γ-rays from chlorine contaminants in Portland cement samples. For an order of magnitude increase in the moisture content of the sample, a 7 to 12% increase in the yield of the 1.167 MeV chlorine γ-ray was observed for the Portland cement samples containing 1 to 5 wt.% chlorine contaminants. This study has shown that effects of sample moisture content on prompt γ-ray yield from constituents of a Portland cement sample are insignificant in a thermal-neutrons capture-based PGNAA setup.     

The succinct synthesis of AT13387, a clinically relevant Hsp90 inhibitor

AT13387 is an orally bioavailable clinical candidate developed to inhibit heat shock protein 90 (Hsp90). This article describes a modified synthetic route for the multi-gram production of AT13387 in 46% overall yield. The modified synthetic route is short, avoids stringent reaction conditions and difficult purifications, which led to an increase in overall yield.     

Zur Synthese von Aminocaprolactam

α-Amino-?-caprolactam (I), an intermediate for the synthesis of L-lysine, has been synthesized by BECKMANN -rearrangement of α-amino-cyclohexanoneoxime (XII) in concentrated sulfuric acid (13% yield) or oleum (34% yield). Cyclisation of α-amino-?-bromocaproamide hydrobromide (VIII) did not yield I but an isomer of I of unknown structure (compound X). Upon hydrolysis X gave a compound XI which was similar to lysine in its chromatographic and electrophoretic behavior.     

Lipase production by acinetobacter radioresistens in a batch fill- and-draw culture

Alkaline lipase production byAcinetobacter radioresistens was performed in a batch fill- and-draw culture, and the results were compared with a batch culture. In the batch culture, the lipase yield was 18 U/mL, which was restricted by the occurrence of protease forming and excessive foaming as cell growth ceased. Because the formation of lipase was found to be chiefly growth-associated, the fill- and-draw culture, which provided an environment for continuous growth, could surpass the limitation encountered in a batch culture and increase the lipase yield to 30 U/mL. The improvement in the lipase yield was suggested to be caused by an adaptation of the cells to the medium during the repeated culture. Although the increase in the lipase yield was accompanied by a decrease in lipase productivity, the fill- and-draw culture could be a better mode for lipase production.     

Development of an enantioselective synthetic route to neocarzinostatin chromophore and its use for multiple radioisotopic incorporation

A convergent, enantioselective synthetic route to the natural product neocarzinostatin chromophore (1) is described. Synthesis of the chromophore aglycon (2) was targeted initially. Chemistry previously developed for the synthesis of a neocarzinostatin core model (4) failed in the requisite 1,3-transposition of an allylic silyl ether when applied toward the preparation of 2 with use of the more highly oxygenated substrates 27 and 54. An alternative synthetic plan was therefore developed, based upon a proposed reduction of the epoxy alcohol 58 to form the aglycon 2, a transformation that was achieved in a novel manner, using a combination of the reagents triphenylphosphine, iodine, and imidazole. The successful route to 1 and 2 began with the convergent coupling of the epoxydiyne 15, obtained in 9 steps (43% overall yield) from D-glyceraldehyde acetonide, and the cyclopentenone (+)-14, prepared in one step (75-85% yield) from the prostaglandin intermediate (+)-16, affording the alcohol 22 in 80% yield and with > or =20:1 diastereoselectivity. The alcohol 22 was then converted into the epoxy alcohol 58 in 17 steps with an average yield of 92% and an overall yield of 22%. Key features of this sequence include the diastereoselective Sharpless asymmetric epoxidation of allylic alcohol 81 (98% yield); intramolecular acetylide addition within the epoxy aldehyde 82, using Masamune's lithium diphenyltetramethyldisilazide base (85% yield); selective esterification of the diol 84 with the naphthoic acid 13 followed by selective cleavage of the chloroacetate protective group in situ to furnish the naphthoic acid ester 85 in 80% yield; and elimination of the tertiary hydroxyl group within intermediate 88 using the Martin sulfurane reagent (79% yield). Reductive transposition of the product epoxy alcohol (58) then formed neocarzinostatin chromophore aglycon (2, 71% yield). Studies directed toward the glycosylation of 2 focused initially on the preparation of the N-methylamino --> hydroxyl replacement analogue 3, an alpha-D-fucose derivative of neocarzinostatin chromophore, formed in 42% yield by a two-step Schmidt glycosylation-deprotection sequence. For the synthesis of 1, an extensive search for a suitable 2'-N-methylfucosamine glycosyl donor led to the discovery that the reaction of 2 with the trichloroacetimidate 108, containing a free N-methylamino group, formed the alpha-glycoside 114 selectively in the presence of boron trifluoride diethyl etherate. Subsequent deprotection of 114 under mildly acidic conditions then furnished the labile chromophore (1). The synthetic route was readily modified for the preparation of singly and doubly (3)H- and (14)C-labeled 1, compounds unavailable by other means, for studies of the mechanism of action of neocarzinostatin in vivo.     

Preliminary studies on the processing sequence for southern red oak and municipal solid waste using a hybrid dilute acid/ enzymatic hydrolysis process for ethanol production

Based on this preliminary study, a metric ton of dry southern red oak chips subjected to a first-stage dilute sulfuric acid hydrolysis would yield 132 kg of xylose and 40 kg of glucose and mannose. A second-stage dilute sulfuric acid hydrolysis on the first-stage residue would yield only 128 kg of additional glucose, but a second-stage cellulytic enzyme hydrolysis on the first-stage residue would yield an additional 265 kg of glucose. Fermentation of these hydrolyzates would show that the hybrid process would yield over 50% more ethanol. Results on other biomass are also included.