Stereoselective synthesis of syn-β-amino esters using the TiCl4/R3N reagent system

The reactions of benzaldehyde imines and esters with the TiCl₄/R₃N reagent system give syn-β-amino esters as the major products in 38-87% yields.     

Synthesis of cis-2-aryl-3-pyrrolidine carboxylic esters via diastereoselective cyclization of γ-imino esters using a TiCl4/Et3N reagent system

Facile synthesis of cis-2-aryl-3-pyrrolidine carboxylates from readily accessible γ-imino esters by intramolecular cyclization mediated by a TiCl₄/Et₃N reagent system is described.     

A simple, convenient method for the synthesis of maleic anhydrides from α-keto esters and alkanoic acid anhydrides using the TiCl4/n-Bu3N reagent system

Reaction of α-keto esters with alkanoic acid anhydrides using the TiCl₄/n-Bu₃N reagent system gives the corresponding maleic anhydrides in 62-95% yields.     

RuH2(CO)(PPh3)3-catalyzed arylation of aromatic esters using arylboronates via C-H bond cleavages

The RuH₂(CO)(PPh₃)₃-catalyzed C-H functionalization of aromatic esters with 5,5-dimethyl-2-aryl-[1,3,2]dioxaborinanes (arylboronates) gave the ortho arylation products. This coupling reaction can be performed with various combinations of isopropyl benzoate derivatives and arylboronates. Introduction of CF₃ group in the aromatic ring increased the reactivity of the esters. Pinacolone effectively served as an acceptor of a hydride generated by C-H bond cleavage, and the amount of pinacolone used also affected the yield of the arylation product.     

A simple TiCl4 promoted arylation of orthoformate and benzyl ethers by N,N-dialkylarylamines

N,N-Dialkylarylamines react with trimethyl orthoformate and TiCl₄ under ambient conditions to give the corresponding formyl derivatives in 75-89% yields, whereas the corresponding arylated products are obtained from benzyl ethers and acetals in 42-78% yields.     

A simple and convenient method for preparation of carboxylic acid alkyl esters, phenolic and thioesters using chlorodiphenylphosphine/I2 and imidazole reagent system

Condensation of carboxylic acids with alcohols, phenols and thiols proceeded smoothly to afford carboxylic acid alkyl esters, phenolic esters and thioesters by using the combination of chlorodiphenylphosphine, imidazole and molecular iodine in refluxing acetonitrile. Esterification with this mixed reagent system gave the corresponding products in excellent yields. The phosphorus-containing byproduct was simply removed from the organic phase by basic aqueous workup without the need for chromatography purification.     

Reductive alkylation of perfluorocarboxylic acid esters with CCl3F or CCl4 and synthesis of higher linear perfluoroketones

Barbier-type reductive alkylation of perfluorocarboxylic acid esters (I) with CFCl₃ and activated Al was successfully performed to give α,α-dichloroperfluoroketones (II). A similar reaction of CF₃COOEt with CCl₄ and Al provided a convenient synthesis of CF₃COCCl₃. Ketones (II) were fluorinated further with SbF₅ to form higher linear perfluoroketones (IX). An alternative approach to the synthesis of ketones (IX) was proposed by reductive perfluoroalkylation of esters (I) under the action of R_FI and Al.     

水解法制备的掺铁二氧化钛超微粉的热分析、晶粒生长和结构相变

研究了用四氯化钛水解制备的纯二氧化钛和分步沉淀,共沉淀方式制备的掺铁二氧化钛的热分解状况,品化过程。采用Ｘ射线衍射和Ｖｏｉｇｔ单峰分析法计算了这三种样品在各个燃烧温度下的晶体晶粒度。结果表明,四氯化钛水争方法得到的二氧化钛粉为无定形,无定形博物经钛加热晶化过程是一个持续的过程,并没有以往文献中所报道的明显的晶化温度和晶化放热峰。应用非晶物质晶化晶核生长速率方程了晶粒生长活化能并且进行了讨论。     

A mild method for cleavage of N-Tos protected amines using mischmetal and TiCl4

The para-toluenesulfonyl (Tos) protecting group is removed efficiently and quickly under neutral conditions from the corresponding protected primary and secondary amines using mischmetal in moderate to excellent yields.     

A novel and green synthesis of kojic acid derivatives in ionic liquid [bmim]BF4

A series of 3-(3-hydroxy-6-methyl-4-oxo-4H-pyran-2-yl)-3-phenylpropanamide derivatives were synthesized efficiently by one-pot condensation of aromatic aldehydes, meldrum’s acid, allomaltol, and ammonium acetate in ionic liquid [bmim]BF₄. The novel synthesis method offers the advantage of operational simplicity, mild reaction conditions, short reaction time, higher yields, and environmental friendliness.     

Vapor phase synthesis of phthalate esters from benzene and maleic anhydride over CrO3/magnesol and SO42-/ZrO2+

Benzene and maleic anhydride react over solid acids, viz. CrO₃/Magnesol and SO₄ ^2-/ZrO₂ catalysts to form phthalic anhydride and olefins, which in turn produce phthalate esters as end products. Based on the product distribution, a reaction pathway is proposed.     

TiCl4 and Grignard reagent-promoted ring-opening reactions of various epoxides: synthesis of γ-hydroxy-α,α-difluoromethylenephosphonates

A straightforward methodology for the synthesis of diethyl γ-hydroxy-α,α-difluoromethylenephosphonates is reported. In the presence of titanium tetrachloride, epoxide ring-opening reactions occurred upon treatment with lithium diethyl difluoromethylenephosphonate. When diethyl 3,4-epoxy-1,1-difluorobutylphosphonate was reacted with TiCl₄ and Grignard reagents, the corresponding halohydrins were obtained in very good yields.     

One-dimensional chains in uranyl tungstates: Syntheses and structures of A8[(UO2)4(WO4)4(WO5)2] (A=Rb, Cs) and Rb6[(UO2)2O(WO4)4]

Three new uranyl tungstates, A₈[(UO₂)₄(WO₄)₄(WO₅)₂] (A=Rb (1), Cs (2)), and Rb₆[(UO₂)₂O(WO₄)₄] (3), were prepared by high-temperature solid-state reactions and their structures were solved by direct methods on twinned crystals, refined to R₁=0.050, 0.042, and 0.052 for 1, 2, and 3, respectively. Compounds 1 and 2 are isostructural, monoclinic P2₁/n, (1): a=11.100(7), b=13.161(9), , β=90.033(13)°, , Z=8 and (2): , , , β=89.988(2)°, , Z=8. There are four symmetrically independent U⁶⁺ sites that form linear uranyl [O=U=O]²⁺ cations with rather distorted coordination in their equatorial planes. There are six W positions: W(1) and W(2) have square-pyramidal coordination (WO₅), whereas W(3), W(4), W(5), and W(6) are tetrahedrally coordinated. The structures are based upon a novel type of one-dimensional (1D) [(UO₂)₄(WO₄)₄(WO₅)₂]⁴⁻ chains, consisting of WU₄O₂₅ pentamers linked by WO₄ tetrahedra and WO₅ square pyramids. The chains run parallel to the a-axis and are arranged in modulated pseudo-2D-layers parallel to (0 1 0). The A⁺ cations are in the interlayer space between adjacent pseudo-layers and provide a 3D integrity of the structures. Compounds 1 and 2 are the first uranyl tungstates with 2/3 of W atoms in tetrahedral coordination. Such a high concentration of low-coordinated W⁶⁺ cations is probably responsible for the 1D character of the uranyl tungstate units. The compound 3 is triclinic, P1¯ a=10.188(2), b=13.110(2), , α=97.853(3), β=96.573(3), γ=103.894(3)°, , Z=4. There are four U positions in the structure with a typical coordination of a pentagonal bipyramid that contain uranyl ions, UO₂²⁺, as apical axes. Among eight W sites, the W(1), W(2), W(3), W(4), W(5), and W(6) atoms are tetrahedrally coordinated, whereas the W(7) and W(8) cations have distorted fivefold coordination. The structure contains chains of composition [(UO₂)₂O(WO₄)₄]⁶⁻ composed of UO₇ pentagonal bipyramids and W polyhedra. The chains involve dimers of UO₇ pentagonal bipyramids that share common O atoms. The dimers are linked into chains by sharing corners with WO₄ tetrahedra. The chains are parallel to [−101] and are arranged in layers that are parallel to (1 1 1). The Rb⁺ cations provide linkage of the chains into a 3D structure. The compound 1 has many structural and chemical similarities to its molybdate analog, Rb₆[(UO₂)₂O(MoO₄)₄]. However, the compounds are not isostructural. Due to the tendency of the W⁶⁺ cations to have higher-than-fourfold coordination, part of the W sites adopt distorted fivefold coordination, whereas all Mo atoms in the Mo compound are tetrahedrally coordinated. Distribution of the WO₅ configurations along the chain extension does not conform to its ‘typical’ periodicity. As a result, both the chain identity period and the unit-cell volume are doubled in comparison to the Mo analog, which leads to a new structure type.     

On the paradox of TiCl4 reducing power: pinacol coupling and two-carbon homologation of carbonyl compounds

TiCl₄/DIPEA/CH₂Cl₂ reducing system promotes pinacol coupling and/or reduction to alcohol of aromatic aldehydes and carbonyl compounds activated towards reduction by an electron withdrawing group. In addition, bis homologation of these substrates is observed. An inner-sphere electron transfer from TiCl₄ to DIPEA accounts for the products distribution.     

Esterification and Selective Esterification in the Presence of TiCl4

A series of carboxylic acids was esterified to the corresponding esters with TiCl_4 as catalyst at room temperature,in high yields.This catalyst was highly effective for the selective esterification of primary alcohols with carboxylic acids,in the presence of secondary alcohols,and for the selective esterification of saturated acid with alcohol in the presence of conjugated acid or aromatic acid.On account of the high yield,high chemoselectivity,mild condition,and being free of other dehydrants,this is an efficient method.     

A SCF Xα SW study of the shake-up in TiCl4

The Ti 2p electron shake-up spectrum in TiCl₄ is calculated using SCF Xα SW method. Results showed that the low-energy satellite can be ascribed to ligand → metal charge-transfer transitions. However, the nature of the intense peak at 9.8 eV cannot be explained within the one-electron model. An anomaly is noted in the eiperimental spectra of the titanium halides.     

Reaction of allylic and benzylic alcohols and esters with PPh3/I2: one-pot synthesis of β,γ-unsaturated compounds

The treatment of tertiary and secondary allylic alcohols containing a terminal double bond, and their acetyl derivatives, with triphenylphosphine and iodine under mild conditions leads regiospecifically and in high stereoselectivity to the corresponding primary allylic iodides, which can react ‘in situ’ with diverse nucleophiles. Primary allylic alcohols and benzyl alcohols and acetates are also transformed into the corresponding iodides under these conditions.     

Synthesis and ethylene polymerization behavior of {MeB(3-Ph-pyrazolyl)3}TiCl3

The new methyl-tris(pyrazolyl)borate reagents Li[MeTp^Ph] (1) [MeTp^Ph]⁻ = MeB(3-Ph-pyrazolyl)₃⁻) and Tl[MeTp^Ph] (2) react with TiCl₄ to afford (MeTp^Ph)TiCl₃ (3) in 77% and 81% yield respectively. 2 reacts with ZrCl₄ and HfCl₄ to yield mixtures of products. The reaction of 1 with TiCl₃(THF)₃ proceeds with B-N bond cleavage to afford TiCl₃(3-Ph-pyrazole)(THF)₂ as the major product (30%). The reaction of 3 with MeLi (3 equiv) yields 1 (60%) and reduced Ti species, via apparent displacement of [MeTp^Ph]⁻ and generation of unstable TiCl₄Me_4−x species. Under MAO activation conditions (MAO = methylalumoxane), 3 polymerizes ethylene to linear polyethylene. 3/MAO is significantly more active in ethylene polymerization than the hydrido-tris(pyrazolyl)borate analogue {HB(3-Ph-pyrazolyl)₃}TiCl₃/MAO.     

TiCl4-promoted addition of nucleophiles to open chain α-amidoalkylphenyl sulfones

Linear α-amidoalkylphenyl sulfones are converted into the corresponding N-acyliminium ions by treatment with TiCl₄ at low temperature and then made to react with different nucleophiles such as allyltrimethylsilane, silyl ketene acetal, anisole and thiophene.