Reaction between carbon dioxide and elementary fluorine

Reactions between carbon dioxide and fluorine were examined at temperatures of 303-523 K under various pressure and mixture ratios of both gases. Reactions were carried out similarly under the existence of NaF, CsF and EuF₃.After the reaction, fluorine was removed and the reaction products were analyzed using FT-IR, GC/FT-IR and GC/MS. The major products were CF₃OF, COF₂, CF₄ and CF₂(OF)₂.The best yield of COF₂ was 11.1% under the reaction condition of CO₂/F₂ = 76 kPa/76 kPa with temperature of 498 K for 72 h in a direct reaction. The formation rate of COF₂ in the direct reaction was estimated as 0.232 dm³ mol⁻¹ h⁻¹ under the reaction conditions of CO₂/F₂ = 76 kPa/76 kPa, at 498 K. In the presence of CsF, it was estimated as 1.88 dm³ mol⁻¹ h⁻¹ at CO₂/F₂ = 76 kPa/76 kPa at 498 K.The activation energy of the COF₂ formation in the direct reaction was estimated as 45.7 kJ mol⁻¹ at CO₂/F₂ = 76 kPa/76 kPa at 498 K. In addition, 24.2 and 38.9 kJ mol⁻¹ were evaluated at CO₂/F₂ = 76 kPa/76 kPa at 498 K, respectively, in the presence of CsF and EuF₃.     

Mechanistic studies on the Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by 8-quinolinol

8-Quinolinol (HQ) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) solution to give [Pd(α-/β-NaiR)(Q)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show a first order dependence of rate on each of the concentration of the metal complex and HQ. Addition of LiCl to the reaction retarded the rate of reaction and has proved the cleavage of the Pd–Cl bond as the rate-determining step. Thermodynamic parameters (Δ^‡H^° and Δ^‡S^°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂, increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ < Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ < Pd(α-NaiR)Cl₂.     

Fluorine-doped nanocrystalline SnO2 powders prepared via a single molecular precursor method as anode materials for Li-ion batteries

Fluorine-doped nanocrystalline tin dioxide materials (F:SnO₂) have been successfully prepared by the sol-gel process from a single molecular precursor followed by a thermal treatment at 450-650 °C. The resulting materials were characterized by FTIR spectroscopy, powder X-ray diffraction, nitrogen adsorption porosimetry (BET) and transmission electron microscopy (TEM). The mean particle size increased from 5 to 20 nm and the specific surface area decreased from 123 to 37 m²/g as the temperature of heat treatment was risen from 450 to 650 °C. Fluorine-doped nanocrystalline SnO₂ exhibited capacity of 560, 502, and 702 mA h/g with 48%, 50%, and 40% capacity retention after 25 cycles between 1.2 V and 50 mV at the rate of 25 mA/g, respectively. In comparison, commercial SnO₂ showed an initial capacity of 388 mA h/g, with only 23% capacity retention after 25 cycles.     

Flow injection kinetic spectrophotometric method for the determination of trace amounts of nitrite

In this work, a new, simple and sensitive flow injection catalytic kinetic spectrophotometric determination of nitrite is reported based on catalytic effect of nitrite on the redox reaction between sulfonazo III and potassium bromate in acidic media. The reaction was monitored by measuring the decrease in the absorbance of sulfunazo III at 570 nm. Various chemical (such as the effect of acidity, reagents concentrations) and instrumental parameters (flow rate, reaction coil length, injection volume and temperature) were studied and were optimized. Under the optimum conditions calibration graph was linear in the nitrite concentration ranges of 8.00 × 10⁻³-3.00 × 10⁻¹ μg/ml (with slope of 2.40) and 3.50 × 10⁻¹-1.80 μg/ml (with slope of 0.42). The detection limit was 6.00 × 10⁻³ μg/ml of nitrite, the relative standard deviation (n = 10) was 1.25% and 0.88% for 5.00 × 10⁻² and 2.00 × 10⁻¹ μg/ml of nitrite respectively. About 60 samples in 1 h can be analyzed. The interfering effects of various chemical species were studied. The method was successfully applied in the determination of nitrite in food and environmental samples.     

Substitution kinetics of W(CO)5(η-bis(trimethylsilyl)ethyne) with triphenylbismuthine

The labile complex W(CO)₅(η²-btmse) undergoes replacement of bis(trimethylsilyl)ethyne, btmse, by triphenylbismuthine in cyclohexane solution at an observable rate in the temperature range of 35-50 °C yielding almost solely W(CO)₅(BiPh₃) as the final product. The kinetics of this substitution reaction was studied in cyclohexane solution by quantitative FT-IR spectroscopy. The substitution reaction obeys a pseudo-first-order kinetics with respect to the concentration of the starting complex. The observed rate constant, k_obs, was determined at four different temperatures and three different concentrations of the entering ligand BiPh₃ in the range 16.8-65.4 mM. From the evaluation of kinetic data a possible reaction mechanism was proposed in which the rate determining step is the cleavage of metal-alkyne bond in the complex W(CO)₅(η²-btmse). A rate law was derived from the proposed mechanism. From the dependence of k_obs on the entering ligand concentration, the rate constant k₁ for the rate determining step was estimated at all temperatures. The activation enthalpy (106 ± 2 kJ mol⁻¹) and the activation entropy (111 ± 6 J K⁻¹ mol⁻¹) were determined for this rate determining step from the evaluation of k₁ values at different temperatures. The large positive value of the activation entropy is consistent with the dissociative nature of reaction. The large value of the activation enthalpy, close to the calculated tungsten-alkyne bond dissociation energy, also supports this dissociative rate-determining step of the substitution reaction.     

Kinetic analysis for hydrothermal depolymerization of nylon 6

We investigated the influences of reaction temperature, time and water density. We also investigated the reaction rate and reaction scheme which is necessary to industrialize this process from the result of hydrolysis of nylon 6 in sub- and supercritical water. The reactions were carried out at temperatures between 573 and 673 K under the estimated pressures of up to 35 MPa (water amount charged in a reactor 0.83-3.79 g/5 cm³ - reactor) for reaction times of 5-60 min. The main products of hydrolysis of nylon 6 by sub- and supercritical water are ?-caprolactam and ?-aminocaproic acid. Based on our experimental results, the reaction scheme of nylon 6 decomposition is represented. Nylon 6 was decomposed into ?-aminocaproic acid by hydrolysis followed by cyclodehydration to ?-caprolactam or decomposition further to lower molecules. At each reaction conditions, the k₁ and k₂ values were determined and the activation energy was calculated.     

Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by picolinic acid: Kinetic and mechanistic studies

Picolinic acid (picH) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) medium to give [Pd(α-/β-NaiR)(pic)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show first order dependence of rate on each of the concentration of Pd(II) complex and picH. Addition of LiCl to the reaction decreases the rate of reaction and has proved the cleavage of Pd–Cl bond at the rate-determining step. Thermodynamic parameters (Δ^‡H° and Δ^‡S°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂ increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ <  Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ <  Pd(α-NaiR)Cl₂.     

Ab initio/DFT theory and multichannel RRKM study on the mechanisms and kinetics for the CH3S + CO reaction

The potential energy surface for the reaction of CH₃S with CO was calculated at the G3MP2//B3LYP/6-311++G(d,p) level. The rate constants for feasible channels leading to several products were calculated by TST and multichannel-RRKM theory. The results show that addition–elimination mechanism is dominant, while hydrogen abstraction mechanism is uncompetitive. The major channel is the addition of CO to CH₃S leading to an intermediate CH₃SCO which then decomposes to CH₃ + OCS. In the temperature range of 200–3000 K, the overall rate constants are positive temperature dependence and pressure independence, and it can be described by the expression as k = 1.10 × 10⁻¹⁶T^1.57exp(−3359/T) cm³ molecule⁻¹ s⁻¹. At temperature between 208 and 295 K, the calculated rate constants are in good agreement with the experimental upper limit data. At T = 1000 and 2000 K, the major product is CH₃ + OCS at lower pressure; while at higher pressure, the stabilization of IM1 is dominant channel.     

Mechanisms involved in chemical vapor generation by aqueous tetrahydroborate(III) derivatization : Role of hexacyanoferrate(III) in plumbane generation

The role played by K₃Fe(CN)₆ (0.08 or 1.5 g l^− 1) in producing strong enhancement factors in the generation efficiency of plumbane in the reaction of NaBH₄ (10 or 40 g l^− 1) with Pb(II) (50 μg l^− 1) in 0.1 M HCl solution, was investigated by using continuous flow chemical vapor generation coupled with atomic fluorescence spectrometry (CF-CVG-AFS). Different mixing sequences and reaction times of reagents were tested using different chemifold setups. Part of CF-CVG-AFS experiments were performed using the on-line, delayed addition of Pb(II) to a K₃Fe(CN)₆ + NaBH₄ reaction mixture. Kinetic calculations estimating the concentration of K₃Fe(CN)₆ remaining in the K₃Fe(CN)₆ + NaBH₄ reaction mixture before it merged with Pb(II) solution were also performed. Batch experiments measuring the amount of hydrogen evolved (pressure of H₂ vs time) and pH variation during K₃Fe(CN)₆ + NaBH₄ + HCl reaction were performed in order to have a correct estimation of the concentration of K₃Fe(CN)₆ remaining in the reaction system. The comparison of CF-CVG-AFS experiments with kinetic calculations indicates that strong enhancement factors of plumbane generation can be obtained without any interaction of K₃Fe(CN)₆ with Pb(II). The key role of K₃Fe(CN)₆ is recognized in its reaction with NaBH₄ to give “special” borane complex intermediates, which are highly effective in the generation of plumbane from Pb(II).     

Methyl abstraction kinetics of CpFe(CO)2Me using the benzyl radical clock

The rate constant for the methyl abstraction reaction of CpFe(CO)₂Me has been measured with the benzyl radical clock as (1.1 ± 0.2) × 10⁵ M⁻¹ s⁻¹ at room temperature. Time-resolved Fourier-transform Infrared (FTIR) absorption spectroscopy pointed towards the formation of the CpFe(CO)₂ radical upon benzyl abstraction. The main stable product has been established by a linear scan of the reaction mixture as Cp₂Fe₂(CO)₄ produced by the dimerization of the CpFe(CO)₂ radicals. The transition state structure for the abstraction process was also found at UB3LYP/6-311+G* level of theory to contain a planar CH₃ group.     

Kinetic method for determination of nanogram amounts of copper(II) by its catalytic effect on hexacynoferrate(III)-citric acid indicator reaction

This paper describes a highly sensitive, selective catalytic-kinetic-spectrophotometric method for the determination of copper(II) concentration as low as 6 ng ml⁻¹. The method is based on the catalytic effect of copper(II) on the oxidation of citric acid by alkaline hexacyanoferrate(III). The reaction was followed by measuring the decrease in absorbance of hexacyanoferrate(III) at 420 nm (λ_max of [Fe(CN)₆]³⁻, ∈ = 1020 dm³ mol⁻¹ cm⁻¹). The dependence of rate of the indicator reaction on the reaction variables has been studied and discussed to propose a suitable mechanism to get a relation between the reaction rate and [Cu²⁺]. A fixed time procedure has been used to obtain a linear calibration curve between the initial rate and lower [Cu²⁺] or log[Cu²⁺] in the range 1 × 10⁻⁷ to 4 × 10⁻⁴ mol l⁻¹ (6.35-25,400 ng ml⁻¹). The detection limit has been calculated to be 4 ng ml⁻¹. The maximum average error is 3.5%. The effect of the presence of various cations, commonly associated with copper(II) and some anions has also been investigated and discussed. The proposed method is sensitive, accurate, rapid and inexpensive compared to other techniques available for determination of copper(II) in such a large range of concentration. The new method has been successfully applied for the determination of copper(II) in various samples.     

Determination of bioavailable soluble arsenic and phosphates in mine tailings by spectrophotometric Sequential Injection Analysis

By using a simple Sequential Injection Analysis (SIA) manifold and in base to the kinetic reaction of the molybdenum with As(V) and P(V) was possible to determine As(III), As(V) and P(V) in simple, binary and ternary samples. The activation energies for the reaction between molybdenum and As(V) and P(V) were of 70.90 kJ mol⁻¹ and of 19.02 kJ mol⁻¹, respectively, therefore it was possible to determine both analytes in mixtures by using different reaction temperature. When the analyses were carried out at room temperature, only the P(V) supplied analytical signal; with increased temperature, the kinetics of reaction for As(V) also increased, and a signal was obtained, being 55 °C the optimum temperature. In order to determine As(III), it was oxidized into As(V) with KIO_3, and the reaction was carried out in the same way as for As(V). To resolve mixtures, an equations system from six calibration curves with different sequences of SIA at different temperature was performed. The lineal ranges were between 0.5 μg mL⁻¹ and 10 μg mL⁻¹ with a repeatability and reproducibility between 0.7% and 5.2% and detection limits between 0.36 μg mL⁻¹ and 0.58 μg mL⁻¹. In binary mixtures of P(V)/As(V) the recoveries were close to 100% for both analytes at ratios lesser than 10:1. For As(V)/As(III) ratios between 1:1 and 5:1 the recoveries were ranged between 85% and 95%. The method was applied in mine tailings and in arsenopyrite. The results showed that the soluble arsenic was found oxidized as As(V). These results were compared with those obtained by atomic absorption spectrometry and both proved to be very close.     

Mechanochemical-hydrothermal synthesis of calcium phosphate powders with coupled magnesium and carbonate substitution

Magnesium- and carbonate-substituted calcium phosphate powders (Mg-, CO₃-CaP) with various crystallinity levels were prepared at room temperature via a heterogeneous reaction between MgCO₃/Ca(OH)₂ powders and an (NH₄)₂HPO₄ solution using the mechanochemical-hydrothermal route. X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis were performed. It was determined that the powders containing both Mg²⁺ and CO₃²⁻ ions were incorporated uniformly into an amorphous calcium phosphate phase while in contrast, the as-prepared powder free of these dopants was crystalline phase-pure, stoichiometric hydroxyapatite. Dynamic light scattering revealed that the average particle size of the room temperature Mg-, CO₃-CaP powders was in the range of 482 nm-700 nm with a specific surface area between 53 and 91 m²/g. Scanning electron microscopy confirmed that the Mg-, CO₃-CaP powders consisted of agglomerates of equiaxed, ≈20-35 nm crystals.     

Solid-state cis-trans isomerization reaction of (η-MeC5H4)W(CO)2P(OPr)3I

cis-(η⁵-MeC₅H₄)W(CO)₂P(OⁱPr)₃I (1) was converted to the trans isomer 2 in the solid state (90-110 °C). The reaction was monitored by heating 1 in NMR tubes for periods of time (2-60 min), cooling the tubes to room temperature and determining the conversion by solution ³¹P and ¹H NMR spectroscopy. The data were consistent with a first-order reaction and yielded an activation energy of 59 ± 3 kJ mol⁻¹. Comparative kinetic data were obtained from an in situ analysis of a powder-XRD study of 1. The powder-XRD study was conducted at 80-100 °C (10-60 min), yielding an activation energy of 52 ± 2 kJ mol⁻¹ (first-order reaction). The reaction could not be monitored by single crystal X-ray diffraction as the crystal disintegrated over time on heating. This disintegration process was monitored by optical microscopy and revealed that while the bulk crystal morphology was retained the crystal surface roughened with time. The compounds 1 and 2 were also structurally characterised by X-ray crystallographic techniques.     

Hybrid sequential injection-flow injection manifold for the spectrophotometric determination of total sulfite in wines using o-phthalaldehyde and gas-diffusion

A new automated spectrophotometric method for the determination of total sulfite in white and red wines is reported. The assay is based on the reaction of o-phthalaldehyde (OPA) and ammonium chloride with the analyte in basic medium under SI conditions. Upon on-line alkalization with NaOH, a blue product is formed having an absorption maximum at 630 nm. The parameters affecting the reaction - temperature, pH, ionic strength, amount concentration and volume of OPA, amount concentration of ammonium chloride, flow rate and reaction coil length - and the gas-diffusion process - sample and HCl volumes, length of mixing coil, donor flow rate - were studied. The proposed method was validated in terms of linearity (1-40 mg L⁻¹, r = 0.9997), limit of detection (c_L = 0.3 mg L⁻¹) and quantitation (c_Q = 1.0 mg L⁻¹), precision (s_r = 2.2% at 20 mg L⁻¹ sulfite, n = 12) and selectivity. The applicability of the analytical procedure was evaluated by analyzing white and red wine samples, while the accuracy as expressed by recovery experiments ranged between 96% and 106%.     

A novel approach based on ferricyanide-mediator immobilized in an ion-exchangeable biosensing film for the determination of biochemical oxygen demand

A novel biochemical oxygen demand (BOD) sensing method employing a ferricyanide (FC) mediator immobilized in an ion-exchangeable polysiloxane was developed. The ion-exchangeable polysiloxane containing alkylammonium groups (PAPS-Cl) was synthesized by sol-gel reaction of 3-(aminopropyl)trimethoxysilane (APTMOS) catalyzed by hydrochloric acid. FC was combined in PAPS-Cl via ion-association and the product was labeled as PAPS-FC, which was employed for a modified glassy carbon electrode. The apparent diffusion coefficient (D_app) of FC on the modified glassy carbon electrode was 9.8 × 10⁻¹¹ cm² s⁻¹. In a three-electrode system, a linear relationship between the anodic current responses and glucose/glutamate (GGA) concentration was obtained up to 40 mg O₂ L⁻¹ (r = 0.994) when the reaction mixture was incubated for 30 min. Single sensor and piece-to-piece reproducibility were less than 3.8 and 7.7%, respectively. The effects of dissolved oxygen, pH, temperature and co-existing substances on the BOD responses were studied. The sensor responses to nine pure organic substances were compared with the conventional BOD₅ method and other biosensor methods. Detection results of seawater samples were compared with those obtained from the BOD₅ method and showed a good correlation (r = 0.988).     

Investigation of perfluoroperoxy radicals self-coupling reactions by kinetic EPR spectroscopy

The rate constants and activation parameters for the self-coupling of perfluoroperoxy radicals of structure A and B: C₇F₁₅OO (A) and R_FOCF₂OO (B) have been determined in perfluorohexane solution in the temperature range 228-258 K. The magnitude of the rate constants obtained ranks between 6.6×10⁸ and 2.5×10⁹ l mol⁻¹ s⁻¹ and are therefore, among the largest rate values so far reported in the literature for primary peroxy radicals couplings. The activation energy is positive and lower for the peroxy radicals (A) with respect to the peroxy radicals (B) (10.5 and 23.0 kJ mol⁻¹, respectively).Analysis by kinetic modeling has shown that the peroxy radicals decay curves are compatible with the participation of peroxy radicals↔tetroxide equilibria to the reaction mechanism.Upper limit values of k_bs<10 and <20 s⁻¹ were inferred for the β-scission reactions of the perfluoroalkylperoxy radicals at 228 and 258 K, respectively.     

Dimerization of terminal alkynes catalyzed by chloro(η-pentadienyl) bis(triphenylphosphine)ruthenium(II) and kinetics of phosphine substitution

Exchange of PMe₂Ph for PPh₃ in (η⁵-pentadienyl)ruthenium{bis(triphenylphosphine)}chloride, (η⁵-C₅H₇)Ru(PPh₃)₂Cl (1) under first order conditions proceeds rapidly in THF at room temperature. A pseudo-first order rate constant of 17 ± 2 × 10⁻⁴ s⁻¹ is obtained for the reaction at 21 °C. The rate constant is essentially independent of the phosphine concentration. The activation parameters, ΔH^† = 16.1 ± 0.4 kcal mol⁻¹ and ΔS^† = −16 ± 1 cal K⁻¹ mol⁻¹ differ from those reported for phosphine exchange in CpRu(PPh₃)₂Cl (2) and (η⁵-indenyl)Ru(PPh₃)₂Cl (3). The reaction of 1 with PMe₂Ph is about 70 times faster than the reaction of 2 at 30 °C and some 40 times faster than the reaction of 3 at 20 °C. (η⁵-C₅H₇)Ru(PPh₃)₂Cl(1) is more active than the ruthenium(II) complexes 2, 3, and TpRu(PPh₃)₂Cl (4) in the catalytic dimerization of terminal alkynes with nearly quantitative conversion of PhCCH and FcCCH at ambient temperature in 24 h. The enhanced substitution rate is accompanied by >50% conversion of phenylacetylene to oligomeric products. Reaction of 1 with NaPF₆ in acetonitrile yields the cationic ruthenium(II) complex [(η⁵-C₅H₇)Ru(PPh₃)₂(CH₃CN)][PF₆] (7). The latter complex is much less active in reactions with phenylacetylene than 1 but avoids the formation of oligomeric products.     

Synthesis of [F]xenon difluoride as a radiolabeling reagent from [F]fluoride ion in a micro-reactor and at production scale

[¹⁸F]Xenon difluoride ([¹⁸F]XeF₂), was produced by treating xenon difluoride with cyclotron-produced [¹⁸F]fluoride ion to provide a potentially useful agent for labeling novel radiotracers with fluorine-18 (t_1/2 = 109.7 min) for imaging applications with positron emission tomography. Firstly, the effects of various reaction parameters, for example, vessel material, solvent, cation and base on this process were studied at room temperature. Glass vials facilitated the reaction more readily than polypropylene vials. The reaction was less efficient in acetonitrile than in dichloromethane. Cs⁺ or K⁺ with or without the cryptand, K 2.2.2, was acceptable as counter cation. The production of [¹⁸F]XeF₂ was retarded by K₂CO₃, suggesting that generation of hydrogen fluoride in the reaction milieu promoted the incorporation of fluorine-18 into xenon difluoride. Secondly, the effect of temperature was studied using a microfluidic platform in which [¹⁸F]XeF₂ was produced in acetonitrile at elevated temperature (≥85 °C) over 94 s. These results enabled us to develop a method for obtaining [¹⁸F]XeF₂ on a production scale (up to 25 mCi) through reaction of [¹⁸F]fluoride ion with xenon difluoride in acetonitrile at 90 °C for 10 min. [¹⁸F]XeF₂ was separated from the reaction mixture by distillation at 110 °C. Furthermore, [¹⁸F]XeF₂ was shown to be reactive towards substrates, such as 1-((trimethylsilyl)oxy)cyclohexene and fluorene.