Optimised isolation of polysaccharides from Lentinula edodes strain NCBI JX915793 using response surface methodology and their antibacterial activities

Mycelial growth in a defined medium by submerged fermentation is a rapid and alternative method for obtaining fungal biomass of consistent quality. Biomass, exopolysaccharides (EPS) and intracellular polysaccharides (IPS) production were optimised by response surface methodology in Lentinula edodes strain LeS (NCBI JX915793). The optimised conditions were pH 5.0, temperature 26°C, incubation period of 25 days and agitation rate of 52 r/min for L. edodes strain LeS. Under the calculated optimal culture conditions, biomass production (5.88 mg mL^? 1), EPS production (0.40 mg mL^? 1) and IPS production (12.45 mg g^? 1) were in agreement with the predicted values for biomass (5.93 mg mL^? 1), EPS (0.55 mg mL^? 1) and IPS production (12.64 mg g^? 1). Crude lentinan exhibited highest antibacterial effects followed by alcoholic, crude and aqueous extracts. The results obtained may be useful for highly effective yield of biomass and bioactive metabolites.     

Culture pH affects exopolysaccharide production in submerged mycelial culture of Ganoderma lucidum

In submerged culture of Ganoderma lucidum, the pH optimum for cell growth has been shown to be lower than that for exopolysaccharides (EPS) formation. Therefore, in the present study, a two-stage pH-control strategy was employed to maximize the productions of mycelial biomass and EPS. When compared, a batch culture without pH control had a maximum concentration of EPS and endopolysaccharides, which was much lower than those with pH control. Maximum mycelial growth (12.5 g/L) and EPS production (4.7 g/L) were achieved by shifting the controlled pH from 3.0 to 6.0 after day 4. The contrast between the controlled-pH process and uncontrolled pH was marked. By using various two-stage culture processes, it was also observed that culture pH has a significant affect on the yield of product, mycelial morphology, chemical composition, and molecular weight of EPS. A detailed observation of mycelial morphology revealed that the productive morphological form for EPS production was a dispersed pellet (controlled pH shifting from 3.0 to 6.0) rather than a compact pellet with a dense core area (controlled pH 4.5) or a feather-like pellet (controlled pH shifting from 6.0 to 3.0). Three different polysaccharides were obtained from each pH conditions, and their molecular weights and chemical compositions were significantly different.     

Production and Characterization of the Exopolysaccharides Produced by Agaricus brasiliensis in Submerged Fermentation

The aim of the work was to study the production of the exopolysaccharides by Agaricus brasiliensis and the isolation of exopolysaccharides (EPSs) with biological effects. A brasiliensis LPB03 was cultured in submerged fermentation in a medium containing glucose, yeast extract, hydrolyzed soybean protein, and salts (pH 6.1) at 29 degrees C and 120 rpm for 144 h. The maximum biomass and EPS yield was 7.80 +/- 0.01 and 1,430.70 +/- 26.75 mg/L, respectively. To isolate the produced EPSs, two methods were compared: (1) with alcohol precipitation and (2) treatment with tricloroacetic acid (TCA), followed by alcohol precipitation. The use of TCA facilitated the purification of the EPS, reducing the amount of the contaminant soy proteins. For monosaccharide identification, the EPSs were hydrolyzed, derivatized to alditol acetates, and analyzed by gas chromatography (GC) and GC-mass spectrometry, which showed the presence (in molar percentage) of mannose (58.7), galactose (21.4), and glucose (13.1) as major sugars, with lower amounts of rhamnose (3.9) and xylose (2.8). Scanning electron microscopy was used to observe the morphological structure of the EPS. The experiments in vivo including EPS in the mice diet during 8 weeks indicated the hipocholesteremic and hypoglycemic effects.     

Combination of <Superscript>13</Superscript>C/<Superscript>113</Superscript>Cd NMR,potentiometry, and voltammetry in characterizing the interactions between Cd and two models of the main components of soil organic matter

This work allowed the characterization of the Cd-binding sites of two compounds taken as models for exudates, the main components of soil organic matter (SOM). The studied compounds were exopolysaccharides (EPS), specifically exudates of roots (polygalacturonic acid) and of soil bacteria (Phytagel). Potentiometric acid–base titrations were performed and fitting of the obtained results indicated the presence of two main classes of acidic sites, defined by their pK _a values, for both EPS but of a different nature when comparing the two compounds. The two studied exopolysaccharides presented different acidic/basic site ratios: 0.15 for Phytagel and 0.76 for polygalacturonic acid. Spectroscopic techniques (¹³C/¹¹³Cd NMR, FTIR) distinguished different Cd surroundings for each of the studied EPS, which is in agreement with the titration results. Furthermore, these analyses indicated the presence of –COOH and –OH groups in various proportions for each exopolysaccharide, which should be linked to their reactivity towards cadmium. Cadmium titrations (voltammetric measurements) also differentiated different binding sites for each compound and allowed the determination of the strength of the Cd-binding site of the EPS. Fitting of the results of such voltammetric measurements was performed using PROSECE (Programme d’Optimisation et de Speciation Chimique dans l’Environnement), a software coupling chemical speciation calculation and binding parameter optimization. The fitting, taking into account the Cd²⁺/H⁺ competition towards exopolysaccharides, confirmed the acid-base titrations and spectroscopic analyses by revealing two classes of binding sites: (i) one defined as a strong complexant regarding its Cd²⁺–EPS association (logK = 9–10.4) and with basic functionality regarding H⁺–EPS association (pK _a = 11.3–11.7), and (ii) one defined as a weak complexant (logK = 7.1–8.2) and with acidic functionality (pK _a = 3.7–4.0). Therefore the combination of spectroscopic analyses, voltammetry, and fitting allowed the precise characterization of the binding sites of the studied exopolysaccharides, mimicking the main SOM components. Furthermore, the binding parameters obtained by fitting can be used in biogeochemical models to better define the role of key SOM compounds like exudates of roots and of soil bacteria on trace metal transport or assimilation.     

Mushroom Polysaccharides and Lipids Synthesized in Liquid Agitated and Static Cultures. Part I: Screening Various Mushroom Species

The effect of four synthetic media containing glucose (initial concentration 30?g?l^?1) on mycelial growth, exopolysaccharides (EPS) and cellular lipids production was examined in 11 mushroom species after 12 and 16?days of culture in static- and shake-flasks. Fatty acid analysis of cellular lipids produced was also performed. Agitation had a positive effect on biomass production, glucose consumption and lipid biosynthesis. Media that favoured the production of biomass were not suitable for EPS biosynthesis and vice versa. Biomass values varied from ??1.0?g?l^?1 (Lentinula edodes) to ??19?g?l^?1 (Pleurotus ostreatus), while the highest EPS quantity achieved ranged between 1.6 and 1.8?g?l^?1 (for Ganoderma lucidum and L. edodes, respectively). Quantities of total cellular lipids varied between 2.5 and 18.5?% w/w, in dry mycelial mass for the fungi tested. Lipid in dry weight values were influenced by the medium composition. Cellular lipids presented noticeable quantities of poly-unsaturated fatty acids like linoleic acid. Compared to most of the mushrooms tested, lipids of Volvariella volvacea were more saturated. The ability of several mushroom species of our study to produce in notable quantities the above-mentioned added-value compounds renders these fungi worthy for further investigations.     

An Indigenous Hyperproductive Species of Aureobasidium pullulans RYLF-10: Influence of Fermentation Conditions on Exopolysaccharide (EPS) Production

In recent years, a significant interest has been generated in discovering and developing exopolysaccharides (EPS) produced by microorganisms, especially fungi due to their multifaceted industrial and pharmacological applications. A number of filamentous and cellular fungi have been explored for this; however, according to the existing literature, the work on exopolysaccharide production by indigenous culture on this aspect is still very less and requires a serious attention. The present work is an attempt in this regard and aims to optimize the submerged culture conditions to produce the exopolysaccharides from an indigenous yeast Aureobasidium pullulans RYLF-10 with respect to several operating parameters in shake flask fermentation. The yeast A. pullulans RYLF-10 was identified by 18s RNA sequencing and detailed study on its nutritional requirements, and environmental conditions for submerged culture have been optimized. The optimal temperature and pH for both the vegetative growth and EPS production were found to be 28?±?1 °C and 5.0, respectively, while the agitation speed and inoculum size were reported to be 150 rpm and 1 % (v/v), respectively. Sucrose (50 g/l) and yeast extract (1 g/l) were found to be the most suitable carbon and nitrogen sources which worked best in the ratio of 60:1 and resulted in the maximum EPS yield. Similarly, the other variables like growth regulator (riboflavin) and minerals (NaCl?+?K₂HPO₄?+?MgSO₄) altogether resulted in a noteworthy EPS yield of 45.24 g/l which is the maximum yield from this indigenous isolate of A. pullulans RYLF-10.     

Poly-β-hydroxybutyrate and Exopolysaccharide Biosynthesis by Bacterial Isolates from Pigeonpea [<Emphasis Type="Italic">Cajanus cajan</Emphasis> (L.) Millsp] Root Nodules

The bacterial strains that are able to produce biopolymers that are applied in industrial sectors present a source of renewable resources. Some microorganisms are already applied at several industrial sectors, but the prospecting of new microbes must bring microorganisms that are feasible to produce interesting biopolymers more efficiently and in cheaper conditions. Among the biopolymers applied industrially, polyhydroxybutyrate (PHB) and exopolysaccharides (EPS) stand out because of its applications, mainly in biodegradable plastic production and in food industry, respectively. In this context, the capacity of bacteria isolated from pigeonpea root nodules to produce EPS and PHB was evaluated, as well as the cultural characterization of these isolates. Among the 38 isolates evaluated, the majority presented fast growth and ability to acidify the culture media. Regarding the biopolymer production, five isolates produced more than 10 mg PHB per liter of culture medium. Six EPS producing bacteria achieved more than 200 mg EPS per liter of culture medium. Evaluating different carbon sources, the PHB productivity of the isolate 24.6b reached 69% of cell dry weight when cultured with starch as sole carbon source, and the isolate 8.1c synthesized 53% PHB in dry cell biomass and more than 1.3 g L⁻¹ of EPS when grown using xylose as sole carbon source.     

Ultrasound‐enhanced and microwave‐assisted extraction of lipid from Dunaliella tertiolecta and fatty acid profile analysis

Microalgal lipid is considered as a potential biodiesel resource due to its advantages compared to other bioresources. The production of biofuel from microalgae includes several stages like microalgae cultivation, biomass harvest, biomass treatment, lipid extraction, and the ultimate biodiesel synthesis. Lipid extraction is closely associated with the productivity and cost of energy production. In the present study, lipid of green algae Dunaliella tertiolecta was extracted by chemical agents with involvement of ultrasound and microwave. The optimization of experimental conditions was carried out by response surface methodology and orthogonal test design. Using the ultrasonic technique, an extraction rate of 45.94% was obtained under the optimum conditions of ultrasonic power 370 W, extraction time 5 min and liquid/solid ratio 125 mL/g. The extraction rate of 57.02% was obtained by the means of microwave assistance under the optimized conditions of extraction time 160 s, microwave power 490 W and liquid/solid ratio 100 mL/g. The comparison of the two results indicated microwave was more effective than ultrasound in extracting process. When the two techniques were utilized in combination, the optimized condition was ultrasonic power 320 W, ultrasonic time 4 min, microwave power 280 W, microwave time 120 s and liquid/solid ratio 100 mL/g, and the extraction rate was 49.97%.     

Mushroom Polysaccharides and Lipids Synthesized in Liquid Agitated and Static Cultures. Part II: Study of Volvariella volvacea

Volvariella volvacea strains were studied in relation with their ability to produce biomass, lipids and polysaccharides. Firstly, screening of four strains (AMLR 188, 190, 191 and 192) was performed in agar cultures, where the mycelial growth rate of the strains was measured, and in static liquid cultures, where the production of biomass, the biosynthesis of total cellular lipids and the consumption of glucose were monitored. For all strains, biomass production was significant (13?C15?g?l^?1) and total lipid in dry weight (%, w/w) ranged from 3 to 12?%. Afterwards, a detailed kinetic analysis of mycelial biomass, extra- and intra- cellular polysaccharides (EPS, IPS, respectively) as well as lipid production by a V. volvacea selected strain was conducted in submerged static and agitated cultures. Maximum values of 15?g?l^?1 biomass, ??1.0?g?l^?1 EPS and 5.5?g?l^?1 IPS were recorded. Agitation did not have severe impact on biomass, EPS and IPS production, but it increased total lipid in dry weight quantities. EPS, IPS and lipid in dry weight values decreased with time. Glucose was the major cellular carbohydrate detected. Total fatty acid analysis of cellular lipids was performed for all V. volvacea strains and linoleic acid ^??9,12C18:2 was predominant. Neutral lipids constituted the major fraction of cellular lipids, but their quantity decreased as fermentation proceeded. Phospholipids were the most saturated lipid fraction.     

Biosynthesis of poly-β-hydroxybutyrate and exopolysaccharides on azotobacter chroococcum strain 6B utilizing simple and complex carbon sources

Coproduction of poly-β-hydroxybutyrate (PHB) and exopolysaccharides (EPS) was investigated with Azotobacter chroococcum strain 6B isolated from soil samples. The bacterium was cultured using various carbon sources solely or with 0.1 g/L of ammonium sulfate. Ammonium addition resulted in reduced PHB and EPS production with glucose, fructose, and sucrose media, but cellular mass remained constant except for sucrose. Protein was nearly twofold higher in ammonium-grown cultures. Glucose and fructose alone biosynthesized high amounts of EPS (maximum 2.1 and 1.1 g/L, respectively, at 72 h), whereas PHB was accumulated only in glucose-grown cells. Sucrose almost did not produce EPS. Conversely, PHB content was the highest obtained from all experimented conditions (1.1 g/L at 48 h, 40% cell dry wt). When a complex carbon source such as sugar cane molasses was utilized, PHB was accumulated concomitant with EPS production from the initial time to 48 h (0.75 g/L, 37% cell dry wt and 0.6 g/L, respectively), and then PHB decayed at 72 h (0.2 g/L). On the other hand, EPS continued to be biosynthesized (1.1 g/L, 72 h). PHB fractions of total intra- and extracellular biopolymers were calculated. Sucrose-modified Burk’s medium without ammonium addition is suggested as a medium capable of diverting the carbon source for the production of intracellular PHB rather than EPS with A. chroococcum 6B.     

Optimization of medium by orthogonal matrix method for submerged mycelial culture and exopolysaccharide production in Collybia maculata

Optimization of submerged culture conditions for the production of mycelial growth and exopolysaccharides (EPSs) by Collybia maculata was investigated. The optimum temperature and the initial pH for EPS production in a shake-flask culture of C. maculata were found to be 20°C and 5.5, respectively. Among the various medium’s constituents examined, glucose, Martone A-1, K₂HPO₄, and CaCl₂ were the most suitable carbon, nitrogen, and mineral sources for EPS production, respectively. The optimum concentration of the medium’s ingredients determined using the orthogonal matrix method was as follows: 30 g/L of glucose, 20 g/L of Martone A-1, 1g/L of K₂HPO₄, and 1g/L of CaCl₂. Under the optimized culture conditions, the maximum concentration of EPSs in a 5-L stirred-tank reactor was 2.4 g/L, which was approximately five times higher than that in the basal medium. A comparative fermentation result showed that the EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor despite the lower mycelial growth rate. The specific productivities and the yield coefficients in the airlift reactor were higher than those in the stirred-tank reactor even though the volumetric productivities were higher in the stirred-tank reactor than in the airlift reactor.     

Isolation of Novel Microalgae from Acid Mine Drainage and Its Potential Application for Biodiesel Production

Microalgae were selected and isolated from acid mine drainage in order to find microalgae species which could be cultivated in low pH condition. In the present investigation, 30 microalgae were isolated from ten locations of acid mine drainage in South Korea. Four microalgae were selected based on their growth rate, morphology, and identified as strains of KGE1, KGE3, KGE4, and KGE7. The dry biomass of microalgae species ranged between 1 and 2 g L^?1 after 21 days of cultivation. The growth kinetics of microalgae was well described by logistic growth model. Among these, KGE7 has the highest biomass production (2.05?±?0.35 g L^?1), lipid productivity (0.82?±?0.14 g L^?1), and C16–C18 fatty acid contents (97.6 %). These results suggest that Scenedesmus sp. KGE 7 can be utilized for biodiesel production based on its high biomass and lipid productivity.     

Photoautotrophic and Mixotrophic Cultivation of Polyhydroxyalkanoate-Accumulating Microalgae Consortia Selected under Nitrogen and Phosphate Limitation

Microalgae consortia were photoautotrophically cultivated in sequencing batch photobioreactors (SBPRs) with an alteration of the normal growth and starvation (nutrient limitation) phases to select consortia capable of polyhydroxyalkanoate (PHA) accumulation. At the steady state of SBPR operation, the obtained microalgae consortia, selected under nitrogen and phosphate limitation, accumulated up to 11.38% and 10.24% of PHA in their biomass, which was identified as poly(3-hydroxybutyrate) (P3HB). Photoautotrophic and mixotrophic batch cultivation of the selected microalgae consortia was conducted to investigate the potential of biomass and PHA production. Sugar source supplementation enhanced the biomass and PHA production, with the highest PHA contents of 10.94 and 6.2%, and cumulative PHA productions of 100 and 130 mg/L, with this being achieved with sugarcane juice under nitrogen and phosphate limitation, respectively. The analysis of other macromolecules during batch cultivation indicated a high content of carbohydrates and lipids under nitrogen limitation, while higher protein contents were detected under phosphate limitation. These results recommended the selected microalgae consortia as potential tools for PHA and bioresource production. The mixed-culture non-sterile cultivation system developed in this study provides valuable information for large-scale microalgal PHA production process development following the biorefinery concept.     

Production and Properties of Two Novel Exopolysaccharides Synthesized by a Thermophilic Bacterium Aeribacillus pallidus 418

Synthesis of innovative exocellular polysaccharides (EPSs) was reported for few thermophilic microorganisms as one of the mechanisms for surviving at high temperature. Thermophilic aerobic spore-forming bacteria able to produce exopolysaccharides were isolated from hydrothermal springs in Bulgaria. They were referred to four species, such as Aeribacillus pallidus, Geobacillus toebii, Brevibacillus thermoruber, and Anoxybacillus kestanbolensis. The highest production was established for the strain 418, whose phylogenetic and phenotypic properties referred it to the species A. pallidus. Maltose and NH₄Cl were observed to be correspondingly the best carbon and nitrogen sources and production yield was increased more than twofold in the process of culture condition optimization. After purification of the polymer fraction, a presence of two different EPSs, electroneutral EPS 1 and negatively charged EPS 2, in a relative weight ratio 3:2.2 was established. They were heteropolysaccharides consisting of unusual high variety of sugars (six for EPS 1 and seven for EPS 2). Six of the sugars were common for both EPSs. The main sugar in EPS 1 was mannose (69.3 %); smaller quantities of glucose (11.2 %), galactosamine (6.3 %), glucosamine (5.4 %), galactose (4.7 %), and ribose (2.9 %) were also identified. The main sugar in EPS 2 was also mannose (33.9 %), followed by galactose (17.9 %), glucose (15.5 %), galactosamine (11.7 %), glucosamine (8.1 %), ribose (5.3 %), and arabinose (4.9 %). Both polymers showed high molecular weight and high thermostability.     

Production,Purification, and Study of the Amino Acid Composition of Microalgae Proteins

Microalgae are known to be rich in protein. In this study, we aim to investigate methods of producing and purifying proteins of 98 microalgae including Chlorella vulgaris, Arthrospira platensis, Nostoc sp., Dunaliella salina, and Pleurochrysis carterae (Baltic Sea). Therefore, we studied their amino acid composition and developed a two-stage protein concentrate purification method from the microalgae biomass. After an additional stage of purification, the mass fraction of protein substances with a molecular weight greater than 50 kDa in the protein concentrate isolated from the biomass of the microalga Dunaliella salina increased by 2.58 times as compared with the mass fraction before filtration. In the protein concentrate isolated from the biomass of the microalga Pleurochrysis cartera, the relative content of the fraction with a molecular weight greater than 50.0 kDa reached 82.4%, which was 2.43 times higher than the relative content of the same fractions in the protein concentrate isolated from this culture before the two-stage purification. The possibilities of large-scale industrial production of microalgae biomass and an expanded range of uses determine the need to search for highly productive protein strains of microalgae and to optimize the conditions for isolating amino acids from them.     

Process characteristics of exopolysaccharide production by streptococcus thermophilus

The kinetics of growth and exopolysaccharide (EPS) production from Streptococcus thermophilus were studied and optimized for different physical (temperature, pH, aeration rate) and chemical (carbon/nitrogen ratio) factors in milk medium. From these experiments, it was clear that EPS production displays primary metabolite kinetics. Using the optimized conditions, EPS production could also be established in de Man Rogosa Sharpe medium. Growth-associated EPS production, bacterial growth and other fermentation data were translated into a mathematical model.     

Microalgae and bioremediation of domestic wastewater

Domestic wastewaters are produced in huge volumes and abundant with carbon, nitrogen and phosphorous, which are a promising source of nutrients for production of microalgae. Microalgae-based bioremediation of domestic wastewater offers various advantages over traditional treatment approaches because the process consumes CO₂, completely removes nitrogen and phosphorous for production of green biomass and oxygen. Moreover, the abundance of biochemical compositions (e.g., lipids, proteins, carbohydrates, bioactive compounds) of microalgae biomass is superior to terrestrial plant biomass in refining to multi-products having variety of commercial values. In this review, the most dominant microalgae used for simultaneous removal of pollutants and production of biomass and metabolites from domestic wastewater are presented. Biorefinery of microalgae biomass produced from domestic wastewater for production of multiple products is also explored. Finally, challenges and perspectives of successful microalgae-based bioremediation of domestic wastewater toward the biorefinery are briefly discussed.     

Evaluation of Metal Ions and Surfactants Effect on Cell Growth and Exopolysaccharide Production in Two-Stage Submerged Culture of Cordyceps militaris

During the two-stage submerged fermentation of medicinal mushroom Cordyceps militaris, it was found that K⁺, Ca²⁺, Mg²⁺, and Mn²⁺ were favorable to the mycelial growth. The EPS production reached the highest levels in the media containing Mg²⁺ and Mn²⁺. However, Ca²⁺ and K⁺ almost failed to increase significantly exopolysaccharides (EPS) production. Sodium dodecyl sulfate (SDS) significantly enhanced EPS production compared with that of without adding SDS when SDS was added on static culture stage of two-stage cultivation process. The presence of Tween 80 in the medium not only simulated mycelial growth but also increased EPS production. By response surface methods (RSM), EPS production reached its peak value of 3.28?g/L under optimal combination of 27.6?mM Mg²⁺, 11.1?mM Mn²⁺, and 0.05?mM SDS, which was 3.76-fold compared with that of without metal ion and surfactant. The results obtained were useful in better understanding the regulation for efficient production of EPS of C. militaris in the two-stage submerged culture.     

Comparison of citric acid production by solid-state fermentation in flask, column, tray, and drum bioreactors

Studies were conducted to evaluate citric acid production by solid-state fermentation (SSF) using cassava bagasse as substrate employing a fungal culture of Aspergillus niger LPB 21 at laboratory and semipilot scale. Optimization of the process parameters temperature, pH, initial humidity, aeration, and nutritive composition was conducted in flasks and column fermentors. The results showed that thermal treatment of cassava bagasse enhanced fungal fermentation efficacy, resulting in 220 g of citric acid/kg of dry cassava bagasse with only treated cassava bagasse as substrate. The results obtained from the factorial experimental design in a column bioreactor showed that an aeration rate of 60 mL/min (3 mL/[g·min]) and 60% initial humidity were optimum, resulting in 265.7 g/kg of dry cassava bagasse citric acid production. This was almost 1.6 times higher than the quantities produced under unoptimized conditions (167.4 g of citric acid/kg of dry cassava bagasse). The defined parameters were transferred to semipilot scale, which showed high promise for large-scale citric acid production by SSF with cassava bagasse. Respirometry assays were carried out in order to follow indirectly the biomass evolution of the process. Citric acid production reached 220, 309, 263, and 269 g/kg of dry cassava bagasse in Erlenmeyer flasks, column fermentors, a tray bioreactor, and a horizontal drum bioreactor, respectively.     

Environmental control of lipids and fatty acid production in the diatomNavicula saprophila

The unique ability of microalgae to accumulate large amounts of lipids has led to an increase in the research on the cultivation of these organisms for the production of fuels. This paper describes the accumulation of cellular lipids by the diatom,Navicula saprophila, as a result of culture management strategies. The cells were grown in two different nutrient concentrations (nitrogen and silica) maintained at 20° and 30°C. The biomass, lipids, and fatty acids were measured. Biomass yield was higher in a nutrient (nitrogen/silica) nonstress treatment; however, the production of lipids was enhanced in a nutrient stress medium at 30 °C. The influence of the environmental conditions on the distribution of fatty acids was also observed.