Evaluating the ability of polyhydroxyalkanoate synthase mutants to produce P(3HB-co-3HA) from soybean oil

Polyhydroxyalkanoate (PHA) synthase from Pseudomonas sp 61-3 (PhaC1(Ps)) is able to synthesize P(3HB-co-3HA), consisting of a 3HB unit and medium-chain-length 3HA units of 6-12 carbon atoms. Expression vectors encoding 76 PhaC1(Ps) mutants with an amino acid replacement at position 130, 325, 477 or 481 were individually introduced into Ralstonia eutropha. The mutant enzyme genes were evaluated in terms of their abilities to synthesize P(3HB-co-3HA) using soybean oil as a carbon source. 20 mutants showed significantly high accumulation levels of PHA exceeding 30 wt.-% and as high as 57 wt.-%. It was found that hydrophobic amino acids at the positions are more likely to enhance accumulation of PHA in R. eutropha.     

Production,ultrasonic extraction,and characterization of poly (3‐hydroxybutyrate) (PHB) using Bacillus megaterium and Cupriavidus necator

Biodegradable polymer polyhydroxyalkanoates are one of the promising alternatives for conventional plastics. The present article focuses on a modified and novel method for the synthesis of poly (3‐hydroxybutyrate) (PHB) by two microorganisms, viz. Bacillus megaterium and Cupriavidus necator. These microbial cells were grown over fructose as a carbon source, and the produced PHB was recovered using ultrasound as well as solvent assisted extraction. The extracted PHB was characterized using FTIR, ¹H, and ¹³C NMR to observe the functional groups in the PHB molecule. The XRD characterization confirmed the partial crystalline nature of PHB, and the results of TGA, DTG, and DSC analysis attributed to the thermal stability of PHB. The major step of weight loss of PHB derived by B. megaterium and C. necator in TGA analysis was found to be 415°C and 289°C, respectively. These values were comparatively higher than standard PHB, for which it is 260°C. Similarly, the maximum degradation temperature for standard PHB is 236°C, whereas the maximum degradation temperature of PHB synthesized by B. megaterium and C. necator are 248°C and 277°C, respectively. This ascertains that the produced PHB has greater resistance to thermal degradation as compared with PHB standard. The melting point of synthesized PHBs were found to be 175°C to 176°C, which is similar to standard PHB. The glass transition temperature of the synthesized PHBs varies from –8°C to 6°C. The plausible reason behind the variances could be due to difference in crystallinity and molecular weight of polymer matrix. Nevertheless, thermal properties of PHB produced by B. megaterium and C. necator are found to be similar or much better than commercial PHB. The degree of crystallinity of synthesized PHBs are lower than previously reported literatures, which extends its range of applications.     

Structure and biosynthetic assembly of cupriachelin, a photoreactive siderophore from the bioplastic producer Cupriavidus necator H16

The bacterium Cupriavidus necator H16 produces a family of linear lipopeptides when grown under low iron conditions. The structural composition of these molecules, exemplified by the main metabolite cupriachelin, is reminiscent of siderophores that are excreted by marine bacteria. Comparable to marine siderophores, the ferric form of cupriachelin exhibits photoreactive properties. Exposure to UV light induces an oxidation of its peptidic backbone and a concomitant reduction of the coordinated Fe(III). Here, we report the genomics-inspired isolation and structural characterization of cupriachelin as well as its encoding gene cluster, which was identified by insertional mutagenesis. Based upon the functional characterization of adenylation domain specificity, a model for cupriachelin biosynthesis is proposed.     

Bioconversion of Glycerine Pitch into a Novel Yellow-Pigmented P(3HB-co-4HB) Copolymer: Synergistic Effect of Ammonium Acetate and Polymer Characteristics

Glycerine pitch waste generated from oleochemical industry was exploited as a carbon source for poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) copolymer production by a novel, yellow-pigmented bacterium Cupriavidus sp. USMAHM13 to improve the economics of microbial polyhydroxyalkanoate production and to establish a feasible waste management approach. Medium optimization using response surface methodology through shake-flask fermentation had led to the accumulation of P(3HB-co-51%4HB) copolymer using a combination of glycerine pitch (10 g/l), 1,4-butanediol (8.14 g/l), and ammonium acetate (2.39 g/l). P(3HB-co-4HB) copolymers with 4HB monomer compositions ranged from 3 to 40 mol% were obtained through batch fermentation in a bioreactor using different concentrations of ammonium acetate. The copolymers exhibited a wide range of material properties depending on the monomer composition and type of carbon sources. P(3HB-co-40%4HB) was a typical random copolymer, whereas other P(3HB-co-4HB) produced were blend copolymers. Carotenoid pigment which was produced simultaneously with the polymer production was found to have negligible effect on the mechanical and thermal properties of the P(3HB-co-4HB) copolymer films.     

Trifluoromethylation of Propargylic Halides and Trifluoroacetates Using (Ph(3)P)(3)Cu(CF(3)) Reagent

A copper-mediated trifluoromethylation of propargylic halides and trifluoroacetates was performed with high allenyl or propargyl selectivity. The reaction proceeds smoothly with aliphatic and aromatic substituents bearing either electron-withdrawing or -supplying groups. Preliminary mechanistic results indicate an ionic mechanism involving nucleophilic transfer of the CF(3) group from the Cu complex to the propargylic substrate.     

Three-Phase Partitioning as a Rapid and Easy Method for the Purification and Recovery of Catalase from Sweet Potato Tubers (Solanum tuberosum)

Three-phase partitioning (TPP) was used to purify and recover catalase from potato crude extract. The method consists of ammonium sulfate saturation, t-butanol addition, and adjustment of pH, respectively. The best catalase recovery (262 %) and 14.1-fold purification were seen in the interfacial phase in the presence of 40 % (w/v) ammonium sulfate saturation with 1.0:1.0 crude extract/t-butanol ratio (v/v) at pH 7 in a single step. The sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) analysis of the enzyme showed comparatively purification and protein molecular weight was nearly found to be 56 kDa. This study shows that TPP is a simple, economical, and quick method for the recovering of catalase and can be used for the purification process.     

Purification and Biochemical Characterization of a Novel Alkaline (Phospho)lipase from a Newly Isolated Fusarium solani Strain

An extracellular lipase from Fusarium solani strain (F. solani lipase (FSL)) was purified to homogeneity by ammonium sulphate precipitation, gel filtration and anion exchange chromatography. The purified enzyme has a molecular mass of 30 kDa as estimated by sodium dodecyl sulphate polyacrylamide gel electrophoresis. The 12 NH₂-terminal amino acid residues showed a high degree of homology with a putative lipase from the fungus Necteria heamatoccocae. It is a serine enzyme, like all known lipases from different origins. Interestingly, FSL has not only lipase activity but also a high phospholipase activity which requires the presence of Ca²⁺ and bile salts. The specific activities of FSL were about 1,610 and 2,414 U/mg on olive oil emulsion and egg-yolk phosphatidylcholine as substrates, respectively, at pH 8.0 and 37 °C. The (phospho)lipase enzyme was stable in the pH range of 5–10 and at temperatures below 45 °C.     

联吡啶钌体系电化学发光法测定克林霉素的研究

建立了以金电极为工作电极电致化学发光测定盐酸克林霉素的方法,并采用循环伏安和电致化学发光法,研究了体系的电化学行为和电化学发光行为.研究结果表明,在0.1 mol/L的硼酸(pH 8.0)缓冲溶液中,扫描速率为100 mV/s时,ECL的峰高与盐酸克林霉素浓度在1.0×10-5 ～1.0×10-4 mol/L和1.0×10-7 ～8.0×10-6 mol/L范围内呈线性关系,其线性回归方程分别为I(counts)=465.00×105c-133.80(r=0.996 8)和I(counts)=20.333×106c+100.25(r=0.995 9).方法的检出限为1.0×10-7 mol/L(S/N=3).连续测定2.0×10-5 mol/L的盐酸克林霉素溶液10次,发光强度值的RSD为1.74%.对样品进行加标回收率实验,回收率为93% ～102%.该方法具有较高的选择性和灵敏度,样品处理简单快速,用于盐酸克林霉素胶囊的测定,结果满意.     

Detection and Quantitation of Afucosylated N-Linked Oligosaccharides in Recombinant Monoclonal Antibodies Using Enzymatic Digestion and LC-MS

The presence of N-linked oligosaccharides in the CH2 domain has a significant impact on the structure, stability, and biological functions of recombinant monoclonal antibodies. The impact is also highly dependent on the specific oligosaccharide structures. The absence of core-fucose has been demonstrated to result in increased binding affinity to Fcγ receptors and, thus, enhanced antibody-dependent cellular cytotoxicity (ADCC). Therefore, a method that can specifically determine the level of oligosaccharides without the core-fucose (afucosylation) is highly desired. In the current study, recombinant monoclonal antibodies and tryptic peptides from the antibodies were digested using endoglycosidases F2 and H, which cleaves the glycosidic bond between the two primary GlcNAc residues. As a result, various oligosaccharides of either complex type or high mannose type that are commonly observed for recombinant monoclonal antibodies are converted to either GlcNAc residue only or GlcNAc with the core-fucose. The level of GlcNAc represents the sum of all afucosylated oligosaccharides, whereas the level of GlcNAc with the core-fucose represents the sum of all fucosylated oligosaccharides. LC-MS analysis of the enzymatically digested antibodies after reduction provided a quick estimate of the levels of afucosylation. An accurate determination of the level of afucosylation was obtained by LC-MS analysis of glycopeptides after trypsin digestion.     

三苯基膦亚铜配合物光解反应的ESR研究

用自旋捕捉技术-柱色谱-电子自旋共振相结合的方法研究了(Ph3)3CunXn(n=1,2; x=Cl,Br,I,CN)和(Ph3P)(biL)CuX(X=Cl,Br,I;biL-2,2'-二吡啶基-1,10-菲绕啉光解中的活性自由基.通过在苯基自由基,二苯基膦自由基与苯基丁基氧化氮之间生成的自旋加合物的电子顺磁共振谱的超精细结构,证实了苯基自由基和二苯基膦自由基的生成.标题化合物对某些反应具有催化活性.     

一种转基因猪血中重组人血清白蛋白分离纯化新方法

基因工程技术已经成为研究和生产重组人血清白蛋白(rHSA)替代人血清白蛋白(HSA)的重点技术,而白蛋白的纯化则是该技术的关键。本文主要介绍了从转基因猪血中纯化rHSA的一种新方法,即热乙醇沉淀与多级色谱分离相结合的rHSA纯化方法。热乙醇沉淀法可从猪血浆中获得rHSA粗提取液,此时rHSA的纯度可达69.5%,回收率达51.3%。进一步采用多级色谱分离法,即阴离子交换色谱和反相色谱法进一步纯化,得到rHSA的最终纯度约为100.0%,总回收率为41.1%。该方法为从转基因猪血浆中大规模纯化用于临床和生化研究的高纯度rHSA提供可能,同时也为rHSA替代HSA奠定了基础。     

Stabilization of the Triphosphallyl Ligand η3‐P3{P(O)H} at Iridium via Alkaline Activation of P4

The selective functionalization of the polyphosphorus moiety Ph₂PCH₂PPh₂PPPP present as a tetrahapto‐ligand in complex [Ir(dppm)(Ph₂PCH₂PPh₂PPPP)]⁺ ( 1 , dppm=Ph₂PCH₂PPh₂) was obtained by reaction of 1 with water under basic conditions at room temperature. The formation of the new triphosphaallyl moiety η³‐P₃{P(O)H} was determined in solution by NMR spectroscopy, and confirmed in the solid state by a single‐crystal X‐ray structure of the stable product [Ir(κ²‐dppm)(κ¹‐dppm)(η³‐P₃{P(O)H})] ( 2 ). In solution, 2 has a fluxional behavior attributable to the four P atoms belonging to the tetraphosphorus moiety in 1 and exhibits a chemical exchange process involving the two PPh₂ moieties of the same bidentate ligand, as determined by 1D and 2D NMR spectroscopy experiments carried out at variable temperature. The mechanism of the reaction was investigated at the DFT level, which suggested a selective attack of an in‐situ generated OH^? anion on one of the non‐coordinated phosphorus atoms of the P₄ moiety. The reaction then evolves through an acid‐assisted tautomerization, which leads to the final compound 2 . Bonding analysis pointed out that the new unsubstituted P₃‐unit in the η³‐P₃{P(O)H} moiety behaves as a triphosphallyl ligand.     

蛋白折叠液相色谱法复性和纯化大肠杆菌表达的重组人粒细胞集落刺激因子

用蛋白折叠液相色谱法(PFLC)对大肠杆菌表达的包涵体形式的重组人粒细胞集落刺激因子(rhG-CSF)进行了复性并同时纯化。用Cu2+-亚氨基二乙酸（IDA） Sepharose作为固定化金属离子亲和色谱的固定相。在低浓度脲存在下,以咪唑为洗脱剂,采用线性梯度洗脱rhG-CSF。该法仅通过一步PFLC分离,减少了复性过程中rhG-CSF的聚集,复性后的rhG-CSF的比活性为1.8×108 IU/mg,纯度为97%,质量回收率为32%。     

Conformation of P(O)SCH3 and P (S) OSi (CH3)3 groups in 1,3,2-dioxaphospholanes

Conclusions Based on the dipole moment data, either a cis or near-cis orientation of the phosphoryl and methyl groups, or of the thiophosphoryl and trimethylsilyl groups, is realized in the 2-oxo-2-methylthio- and the 2-thiono-2-trimethylsiloxy-4-methyl- and -4,5-dimethyl-1,3,2-dioxaphospholanes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1880–1883, August, 1976.The authors are indebted to A. N. Vereshchagin and V. A. Naumov for their valuable counsel.     

固相合成碘酸铜及其电化学行为

用液相及固相合成方法合成了2种不同形貌的碘酸铜微粒,扫描电子显微镜(SEM)、X射线衍射(XRD)、交流阻抗、线性扫描(LSV)和恒流放电等测试技术对微粒的形貌、电化学性能及其可能的放电机理进行了表征和讨论。结果表明,用固相合成的样品具有明显的优越性,不仅放电电位增大且放电时间增长,放电容量可达891.5 mA.h/g,接近碘酸铜900 mA.h/g的理论容量。     

Purification and characterization of a nuclease (3'-nucleotidase) from a Penicillium sp

A nuclease (3'-nucleotidase) similar to P1 nuclease from Penicillium citrinum was purified from a commercial digestive from a Penicillium sp. The activity of the nuclease (PA) was separated to three fractions by diethylaminoethyl-Toyopearl 650M column chromatography, in total yield of 10%. The apparent molecular weight of these three nucleases, PA1, PA2 and PA3 was 35000, 33000, and 32000, respectively. All of them were homogeneous so far as checked by sodium dodecyl sulfate slab gel electrophoresis. The three nucleases differed in carbohydrate content, but their amino acid composition was practically the same, and very similar to that of P1 nuclease. The molecular weight of nuclease PA3, the major component of nuclease PA, was approximately 27000 after digestion by endoglycosidase F. The N-terminal and C-terminal amino acid sequences of nuclease PA3 were determined by Edman degradation and carboxypeptidase(s) digestion, respectively. The nuclease PA3 was inactivated in the presence of 10 mM ethylenediamine tetraacetic acid (EDTA) and 65% of its native enzyme activity restored by the addition of 20 mM ZnCl2. The pH-dependent photooxidative inactivation of nuclease PA3 was accelerated by removal of Zn ion by EDTA or trishydroxymethyl aminomethane, indicating the possible chelation of Zn2+ with some histidine residues.     

NaMn6(P2O7)2(P3O10) and KCd6(P2O7)2(P3O10)

The crystal structures of two new diphosphates, sodium hexamanganese bis­(diphosphate) triphosphate, NaMn₆(P₂O₇)₂(P₃O₁₀), and potassium hexacadmium bis­(diphosphate) triphosphate, KCd₆(P₂O₇)₂(P₃O₁₀), confirm the rigidity of the M₆(P₂O₇)₂(P₃O₁₀) matrix (M is Mn or Cd) and the relatively fixed dimensions of the tunnels extending in the a direction of the unit cell. The compounds are isomorphous; the P₂O₇^4? anion and the alkali metal cations lie on mirror planes. Bond‐valence analysis of the bonding details of the atoms found within the tunnels permits a prediction of the conductivity.     

微波消解法测定尿素中氮

本文采用微波消解方法 [1 ] ,对传统定氮法中预处理进行了改进。在常压下 ,用纯尿素为分析物质 ,通过对微波加热时间、硫酸钾、硫酸铜及浓硫酸用量的试验 ,建立了测定尿素中氮的快速消解方法。结果表明 ,微波消解具有准确、快速、节能等优点