Interaction between poly(ethylene oxide) and sodium dodecyl sulfonate as studied by surface tension, conductivity, viscosity, electron spin resonance and nuclear magnetic resonance

The aggregation of sodium dodecyl sulfonate (AS) in aqueous solution containing various amounts of poly(ethylene oxide) (PEO) has been investigated by different experimental techniques. The experimental techniques include surface tension, conductivity, viscosity, electron spin resonance (ESR) and nuclear magnetic resonance (NMR). The critical aggregate concentration of AS on polymer strands as well as the concentration where the polymer becomes saturated with surfactant has been determined. Both ESR and NMR results indicate that the AS–PEO complex forms a more “open” structure and that PEO may penetrate into the interior of the micelles. Received: 22 October 1998 Accepted in revised form: 1 April 1999     

The interaction parameter of crosslinked networks and star polymers

Recent results on blends containing star polymers have revived the interest on the interaction parameters of structures that contain junctions between chains, a matter which can be connected with the earlier studies on the influence of crosslinks on the interaction parameters of polymer networks and gels. Here, we review results on crosslinked networks and star polymer solutions together with the more recent work on star polymer blends. The review covers swelling and elastic deformation of gels, differential vapour sorption between crosslinked and uncrosslinked polymers, osmotic equilibrium of gels and of star polymer solutions, and neutron scattering of polymer blends containing star polymers. In the systems reviewed, the interaction parameters of stars and networks differ from those of linear chains, and the difference is attributed mainly to entropic effects.     

Interactions of monomeric and dimeric cationic surfactants with anionic polyelectrolytes: a fluorescence study

The interactions of conventional cationic, i.e. dodecyl-(DTAB), tetradecyl-(TTAB), and hexadecyltrimethylammonium bromides (HTAB), and dimeric cationic surfactants, i.e. dimethylene bis decyl-(10-2-10), and dodecyldimethylammonium bromides (12-2-12) with anionic polyelectrolytes, were studied by fluorescence measurements. The variation of I₁/I₃ ratio of the fluorescence of pyrene in aqueous solutions of polyelectrolytes was measured as a function of surfactant concentration. A three-step aggregation process involving the critical aggregation concentration (cac) and critical micelle concentration (cmc) was observed in each case. The cationic surfactants with lower hydrophobicity demonstrated higher degree of binding and vice versa.     

Raman and SERS study on ibuprofen metal complexes with biomedical interest

Ibuprofen is one of the most widely used non-steroidal anti-inflammatory drugs (NSAIDs), in which the carboxylate group is available for metal–ligand interactions. The most stable geometries for ibuprofen (in both its protonated and deprotonated forms) were identified by optimizations obtained by the unrestricted Density Functional Theory (DFT). Theoretical study of ibuprofen interacting with Ag colloid in solution, led to two (for the protonated form) and three (for the deprotonated form) different optimized geometries, corresponding to different interaction sites of the Ag₂ cluster. Frequency calculations were performed in the limit of the harmonic approximation, using the aug-cc-pVDZ basis set. Interpretation of the theoretical Raman spectra was performed by the Potential Energy Distribution (PED) analysis of the fundamental vibrations modes. Raman study on the solid Ibuprofen-metal complexes confirmed that Co²⁺ gives monodentate complexes, while Zn²⁺ adopts a bidentate coordination. SERS spectra of metal complexes, suggested that at ppm concentration, the formation of stable 2:1 metal complexes is excluded, while is more probable the formation of 1:1 adduct with bidentate binding on the carboxylic group. The metal reaches its total coordination shell by complexation of water molecules.     

Interactions between cationic gemini/conventional surfactants with polyvinylpyrrolidone: Specific conductivity and dynamic light scattering studies

The interaction between bis(hexadecyldimethylammonium)hexane dibromide (16-6-16), bis(tetradecyldimethylammonium)hexane dibromide (14-6-14), their conventional counterparts cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) with polyvinylpyrrolidone (PVP) was investigated using the conductivity technique. The results show that gemini surfactants interact strongly with PVP as compared to conventional surfactants. The results also reveal that the surfactants with shorter hydrocarbon chain interact weakly as those of longer hydrocarbon chain. The interactions of 16-6-16 and 14-6-14 and their conventional counterparts with PVP were also studied using dynamic light scattering (DLS) measurements. We have also highlighted the effect of surfactant–polymer interactions on the dispersion force in the solution. Critical aggregation concentration (cac) and critical micelle concentration (cmc) were obtained using the conductivity data. The degrees of micelle ionization and free energies associated with aggregation, micellization, and transfer have also been evaluated and discussed.     

An exact enumeration study on adsorption transition of a tethered chain at an adsorbing surface

<正>The number of configurations,c(n,m),of a single chain with length n attached to a flat surface with m monomers contacting the surface is exactly enumerated.A function of c(n,m) about m and n is obtained.From the function,a scaling law for mean energy of chain is derived,and we estimate the critical pointε_c = 0.276 and the crossover exponentφ= 0.5.The free energy difference between tethered chain and free chain in dilute solution is also studied,which shows the critical adsorption point is about 0.272 for infinite long chain with φ= 0.5.     

Thermodynamics of interaction between sodium bis(2‐ethylhexyl) sulfosuccinae and polymers in aqueous solutions by isothermal titration microcalorimetry

The interactions between sodium bis(2‐ethylhexyl) sulfosuccinae (AOT) and two nonionic water‐soluble polymers, including polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG) have been investigated by using isothermal titration microcalorimetry in aqueous solutions at 298.15 K. The results show that the critical aggregation concentration, which corresponding to the first turning point in the curve of experimental interaction heat versus concentration of the surfactant, is lower than the critical micellar concentration (cmc), confirming the existence of polymer‐surfactant interactions. The value of cac is not sensitive to the relative amount of polymer in low concentration range of the polymer. The mono‐layer saturated adsorption concentration, which corresponding to the second turning point, rises as the polymer concentration is increased. The interaction between PVP and AOT is stronger than that between PEG and AOT. The results also indicate that the aggregation of AOT in water and polymers solutions is entropically driven. The observed thermal effects have been interpreted in terms of the interactions of the polymer molecules with AOT monomers or the molecular clusters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 275–283, 2006     

PSS/PDDA自组装膜形成过程中的临界浓度效应

Decher等提出的阴阳聚电解质层层组装膜技术(LbL),方便快捷,结构有序,其纳米级可控,可用于生物传感器、杂多酸多层膜修饰电极及天然多糖类功能膜等领域．LbL膜的厚度直接影响其性能,而膜厚度与紫外吸光度(A)成正比．故A是通常用于评价膜厚度的一种简便方法．紫外吸光度与聚电解质溶液浓度(cp)往往呈递增关系,随着溶液中cp的增大,单位面积上吸附聚电解质的量也增加。     

Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

Analysis of ibuprofen enantiomers in rat plasma by liquid chromatography with tandem mass spectrometry

A sensitive and selective method for the analysis of ibuprofen enantiomers by LC–MS/MS was developed and validated for the purpose of application in pharmacokinetic studies in small experimental animals. Aliquots of 200 μL plasma were submitted to liquid–liquid extraction with hexane/diisopropylether (50:50 v/v) in acid pH. Separation was accomplished in a Chirex® 3005 (250 × 4.6 mm, 5 μm) column at 25°C with a mobile phase that consisted of 0.01 M ammonium acetate in methanol at a flow rate of 1.1 mL/min. The mass spectrometer consisted of an ESI interface operating at negative ionization mode and multiple reaction monitoring. The transitions 205 > 161 and 240 > 197 were monitored for ibuprofen enantiomers and fenoprofen (internal standard), respectively. Method validation included the evaluation of the matrix effect, stability, linearity, lower LOQ, within‐run and between‐run precision, and accuracy. The lower LOQ was 25 ng/mL for each ibuprofen enantiomer, and the calibration curves showed good linearity in the range 0.025–50 μg/mL. The method was successfully applied in the investigation of pharmacokinetic disposition of ibuprofen enantiomers in rats treated orally with 25 mg/kg of the racemate. Enantioselective kinetic disposition was observed with accumulation of (+)‐(S)‐ibuprofen in rats following single oral administration.     

A controlled release of ibuprofen by systematically tailoring the morphology of mesoporous silica materials

A series of mesoporous silica materials with similar pore sizes, different morphologies and variable pore geometries were prepared systematically. In order to control drug release, ibuprofen was employed as a model drug and the influence of morphology and pore geometry of mesoporous silica on drug release profiles was extensively studied. The mesoporous silica and drug-loaded samples were characterized by X-ray diffraction, Fourier transform IR spectroscopy, N₂ adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. It was found that the drug-loading amount was directly correlated to the Brunauer-Emmett-Teller surface area, pore geometry, and pore volume; while the drug release profiles could be controlled by tailoring the morphologies of mesoporous silica carriers.     

Modifications of carbon nanotubes with polymers

The chemical functionalizations of carbon nanotubes (CNTs) could enhance their chemical compatibility and dissolution properties, which enable both a more extensive characterization and subsequent chemical reactivity. The modifications with polymers could not only improve CNTs’ solubility and dispersibility but also the interfacial interaction to polymeric matrices in its composites. The main methods for the modification of CNTs with polymers are noncovalent attachment (polymer wrapping and absorption) and covalent attachment (“grafting to”and “grafting from”). The current states of the literatures in the field are presented in this review.     

Microwave mediated synthesis of non-carboxylic analogues of ibuprofen with improved pharmacological activity

A series of 1,2,4-triazolo[3,4-b]-thiadiazoles were synthesized following microwave irradiation method and also by conventional method.Newly synthesized compounds were evaluated for their anti-inflammatory and analgesic activities.     

A comparative multi-reference configuration interaction study of the low-lying states of two thione isomers of thiophenol

Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S₀–S₃ states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 10⁶ configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S₀ → S₂ for 24 and S₀ → S₃ for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S₃ state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S₁ state of both thiones was found to have nπ* character and is in the visible region. For 24 , S₂ and S₃ are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S₂ and S₃ are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888).     

Statistics of polymer capture by a nanopore: A Brownian dynamics simulation study

We investigate the statistics of polymer capture by a nanopore using Brownian dynamics simulations. It is found that when the velocity flux is greater than a critical velocity flux, the capture picture is a random selection process, otherwise it tends to a statistical process governed by energetic considerations. In addition, the chain ends capture probability decreases as the chain length increases and satisfies a power-law scaling of P0(N)~N-0.8.     

现代高分子物理课程系列漫谈:I.金兹堡判据

金兹堡判据是判定平均场理论有效性的重要准则.本文从一道典型的高分子物理课程课后习题出发,通过求解过程总结在平均场理论框架下如何构造金兹堡判据,并将该思路推广到不对称两组分高分子共混物体系以及高分子溶液体系.     

Complexation induced by weak interaction between DNA and PEO-b-P4VP below the CMC of the polymer

The complexation between circular DNA and individual chains of PEO-b-P4VP with a relatively long PEO block and a short P4VP block is highly controllable when the interaction between DNA and the polymer is weak enough. When one circular DNA chain is taken into consideration, and the polymer concentration is far below its critical micelle concentration(CMC), polymer chains are absorbed by DNA chain due to the interaction between the negatively charged DNA chain and the slightly positively charged P4VP block chains. After the adsorption/complexation, the DNA chain is converted into a nanoring(type 1). In the nanoring, the DNA chain is sufficiently wrapped by the polymer and adopts a fully stretched conformation, so that the DNA compact ratio in the nanorings is close to 1. When the polymer concentration is close to but lower than the CMC, the free polymer chains in the solution are adsorbed not only by the DNA chain but also by the polymer chains that have already been adsorbed on the DNA chain. As a result, the circular DNA chain adsorbs more polymer chains, and thus the resultant nanoring(type 2) has a larger width. In the type 2 nanoring, the DNA chain is slightly compressed; the DNA compact ratio is only about 2-3. Therefore, complexation induced by the weak interaction between DNA and PEO-b-P4VP below the CMC can produce narrow-disperse and large nanorings with a perimeter of micrometers, which are difficult to prepare by existing methods.     

Determination of ibuprofen and novocaine hydrochloride with the use of water-micellar solutions of surfactants

The solubility and acid-base properties of ibuprofen in water-micellar media of surfactants were studied. A new visual method for the titrimetric determination of ibuprofen in pure form was proposed. The smallest pK value (4.43) and the greatest solubility (8.1 mg ml⁻¹) of ibuprofen were achieved using an aqueous cationic micellar medium of 0.1 M tridecylpyridinium bromide. The titration was performed with 0.05 M potassium hydroxide aqueous solution and the exact end-point was determined with the use of xylenol blue as indicator. Conditions for the individual determination of ibuprofen and novocaine hydrochloride in their 1:1 mixtures with the use of 0.1 M tridecylpyridinium bromide were proposed.     

Synthesis and comparative behaviour study of fluorocarbon and hydrocarbon cationic surfactants in aqueous media

A series of perfluorinated cationic surfactants and their corresponding hydrocarbon ones whose general formula is C_nX_2n+1-C(O)NH-(CH₂)₃-N⁺Me₃, I⁻, with X = F, H and n = 9, 11, have been synthesized via two steps. Their aggregative and surface-active properties were studied in aqueous solution using tensiometry and conductimetry. The critical micelle concentrations and the molecular areas at the air/water interface of fluorinated surfactants are lower than those of their hydrocarbon homologues. Micellar aggregation numbers and geometric packing parameters have been investigated. The results indicated that fluorocarbon surfactants tend to form lamellar aggregates while the hydrocarbon ones associate into spherical aggregates.     

The interaction of isomeric hexanediols with sodium dodecyl sulfate and dodecyltrimethylammonium bromide micelles

The micelle formation process for a typical anionic surfactant, sodium dodecyl sulfate, and a typical cationic surfactant, dodecyltrimethylammonium bromide, has been investigated in a series of mixed solvents consisting of different concentrations of isomeric hexanediols (1,2-hexanediol and 1,6-hexanediol) in water. The critical micelle concentrations and the degrees of counterion dissociation of the mixed micelles were obtained from conductance experiments. Luminescence probing experiments have been used to determine the concentration of micelles in solution and, hence, the micellar aggregation numbers of the surfactants in the mixed solvent systems. The alcohol aggregation numbers were determined by combining the partition coefficients (obtained using NMR paramagnetic relaxation enhancement experiments) with the micellar concentrations from the luminescence probing experiments. All these results are interpreted in terms of the difference in the interaction of the isomeric hexanediols with the surfactant as a function of the position of the hydroxyl groups on the six-carbon chain of the alcohol. Received: 28 June 2000/Accepted: 5 July 2000