A catenated anion receptor based on indolocarbazole

A catenated anion receptor 7 comprising two indolocarbazole units was prepared by olefin ring-closing metathesis using Grubbs’ catalyst. Receptor 7 possesses a cage-like cavity where anions are encapsulated by forming four hydrogen bonds in the order of Cl⁻ > AcO⁻ >  >  > Br⁻ >  > I⁻ ≈  in 1% H₂O/acetone.     

Determination of arsenic, iron and selenium in moss samples using hexapole collision cell, inductively coupled plasma-mass spectrometry

Different collision gases (H₂, He and premixed 7% H₂ in He) used in the hexapole collision cell of an inductively coupled plasma-mass spectrometer (ICP-MS) were compared, and the gas-flow rates were optimized for the determination of arsenic (), iron () and selenium (). The study showed that the argon-based interferences at mass-to-charge ratios (m/z) of 56, 75 and 80 can be overcome by the optimized gas flows (7.5 ml min⁻¹ premixed 7% H₂ in He and 2 ml min⁻¹ H₂) in the hexapole collision cell. Detection limits of 15.5 ng l⁻¹ for iron () and 29 ng l⁻¹ for selenium () in 2% (v/v) HNO₃ were obtained under optimized collision cell conditions. The detection limit for arsenic () obtained in difficult hydrochloride acid matrix (5% HCl (v/v)) was 153 ng l⁻¹. The accuracy of the optimized method was confirmed by analyzing two moss reference materials. The results obtained by ICP-MS for arsenic, selenium and iron from both moss reference samples were, in most cases, in good agreement with the certified values.     

Determination of chromium, cadmium and lead in food-packaging materials by axial inductively coupled plasma time-of-flight mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) with a time-of-flight (TOF) analyser was used for the determination of chromium, cadmium and lead in six food-packaging materials (paper and paper board). The samples (0.20-0.25 g) were digested in concentrated nitric acid in a high pressure microwave oven at 180 °C within 15 min. Two different plasma conditions were applied: cool plasma conditions (0.76 kW; 0.85, 0.89 and 15.5 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of chromium and normal plasma conditions (1.21 kW; 0.66, 0.68 and 13.6 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of cadmium and lead. External calibration was used in combination with rhodium (40 ng g⁻¹) as an internal standard. The detection limits (DL = 3S.D./sensitivity) under the conditions used corresponded to 0.01 ng g⁻¹ (), 0.06 ng g⁻¹ (), 0.07 ng g⁻¹ (), 0.03 ng g⁻¹ () and 0.02 ng g⁻¹ ( and ). The precision (R.S.D.) for six replicate determinations (10 s integration time) of 1 and 10 ng g⁻¹ of each analyte varied from 0.72% () to 4.43% (). The contents of chromium, cadmium and lead in the examined materials were evaluated using the signals of , and . They were in the range: 0.25-0.50 μg g⁻¹ for Cr, not detected (nd) to 0.12 μg g⁻¹ for Cd and 0.28-0.35 μg g⁻¹ for Pb in paper and 0.50-0.64 μg g⁻¹ for Cr, nd to 0.09 μg g⁻¹ for Cd and 0.67-0.99 μg g⁻¹ for Pb in paper board.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized in a magnetic nanoparticles-chitosan film

Magnetic nanoparticles (Fe₃O₄) were synthesized by a chemical coprecipitation method. X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to confirm the crystallite structure and the particle's radius. The Fe₃O₄ nanoparticles and chitosan (CS) were mixed to form a matrix in which haemoglobin (Hb) can be immobilized for the fabrication of H₂O₂ biosensor. The Fe₃O₄-CS-Hb film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks due to the redox of Hb-heme Fe (III)/Fe (II) in a pH 7.0 phosphate buffer. The formal potential of Hb-heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 4.0-10.0 with a slope of 46.5 mV pH⁻¹, indicating that electron transfer was accompanied with single proton transportation in the electrochemical reaction. The surface coverage of Hb immobilized on Fe₃O₄-CS film glassy carbon electrode was about 1.13 × 10⁻¹⁰ mol cm⁻². The heterogeneous electron transfer rate constant (k_s) was 1.04 s⁻¹, indicating great facilitation of the electron transfer between Hb and magnetic nanoparticles-chitosan modified electrode. The modified electrode showed excellent electrocatalytic activity toward oxygen and hydrogen peroxide reduction. The apparent Michaelis-Menten constant for H₂O₂ was estimated to be 38.1 μmol L⁻¹.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Crystal structure, electronic structure and physical properties of the new low-valent thallium silicon telluride Tl6Si2Te6 in comparison to Tl6Ge2Te6

The title compounds were prepared from the elements in the stoichiometric ratio at 800 °C under exclusion of air. Tl₆Si₂Te₆ crystallizes in the space group P1¯, isostructural with Tl₆Ge₂Te₆, with , , , α=89.158(2)°, β=96.544(2)°, γ=100.685(2)°, (Z=2). Its structure is composed of dimeric [Si₂Te₆]⁶⁻ units with a Si-Si single bond, while the Tl atoms are irregularly coordinated by five to six Te atoms. Numerous weakly bonding Tl-Tl contacts exist. Both title compounds are black semiconductors with small band gaps, calculated to be 0.9 eV for Tl₆Si₂Te₆ and 0.5 eV for Tl₆Ge₂Te₆. The Seebeck coefficients are +65 μV K⁻¹ in case of Tl₆Si₂Te₆ and +150 μV K⁻¹ in case of Tl₆Ge₂Te₆ at 300 K, and the electrical conductivities are 5.5 and 3 Ω⁻¹ cm⁻¹, respectively.     

Validation of an environmental friendly segmented flow method for the determination of phenol index in waters as alternative to the conventional one

Phenolic compounds are a sort of common pollutants in water. Phenol index becomes an expedite indicator for the evaluation of the contamination level of water samples, in spite of the knowledge of the individual phenol and its derivatives are also important.In this work, an environmental friendly method for the determination of phenols, using a segmented flow system based on the conventional method's reactions without the liquid-liquid extraction step, was validated.Three linear dynamic ranges using C₆H₅OH: 1-10 μg l⁻¹, 10-200 μg l⁻¹ and 0.2-2.5 mg l⁻¹, with a coefficient of variation lower than 2%, were obtained. Several method's performance parameters were determined: limits of detection, limits of quantification, precision through duplicate analysis and trueness using the reference materials purchased from LGC Promochem, RTC no. QCI-043-2 Lot:P1. Measurement uncertainty was evaluated using an interlaboratory approach based on proficiency testing data. Relative combined uncertainty for phenols in water samples, , of 0.054 were obtained, in according to those imposed by the Portuguese Legislation: target for 1 μg l⁻¹ of phenol (surface waters) and target for 500 μg l⁻¹ of phenol (wastewaters).A high efficiency reduction and elimination of reagents and wastes, reduction of analysis time and exposition of the analyst were also obtained.     

Dioxouranium(VI)-carboxylate complexes: A calorimetric and potentiometric investigation of interaction with oxalate at infinite dilution and in NaCl aqueous solution at I = 1.0 mol L and T = 25 °C

In this paper we investigated the interactions between dioxouranium(VI) and oxalate using (H⁺-glass electrode) potentiometry and titration calorimetry. Potentiometric measurements were carried out in NaCl aqueous solutions and at T = 25 °C in a wide range of experimental conditions (concentrations, ligand/metal molar ratio, pH, titrants) at low ionic strength values (I ≤ 0.090 mol L⁻¹, without supporting electrolyte) and at I = 1.0 mol L⁻¹; different procedures were employed for the acquisition of experimental data and careful analysis of these data performed. In all cases the speciation model that best fits experimental data takes into account the formation of the binary mononuclear species UO₂(ox)⁰, UO₂(ox)₂²⁻, UO₂(ox)₃⁴⁻ widely reported in literature, the ternary hydroxyl mononuclear species UO₂(ox)OH⁻, UO₂(ox)(OH)₂²⁻, UO₂(ox)₂OH³⁻, UO₂(ox)₃OH⁵⁻, the protonated ternary mononuclear species UO₂(ox)₃H³⁻ and the binuclear species (UO₂)₂(ox)₅⁶⁻.Calorimetric measurements were carried out following similar procedures and in the same experimental conditions as employed for the potentiometric measurements at I = 1.0 mol L⁻¹ in NaCl. The stability of UO₂²⁺-oxalate²⁻ complexes is fairly high and their main contribution to stability is entropic in nature. Some linear empirical relationships were found which make it possible to calculate (i) the contribution of a single bond: and ; (ii) chelate stabilisation per ring: and and (iii) the mean stability of negatively charged Na⁺-ion pair complexes: log^TK = (0.46 ± 0.02)·|z| (z = charge of complex species), ΔG° = −(2.60 ± 0.1)·|z| kJ mol⁻¹ and TΔS° = 2.5 ± 0.5 kJ mol⁻¹. Both potentiometric and calorimetric results provide evidence of the penta-coordination of the species UO₂(ox)₃⁴⁻. SIT parameters were calculated from the data at I = 0 and I = 1.02 mol kg⁻¹. Comparisons are made with literature data. An insoluble dioxouranium(VI) ternary complex was synthesised (at I = 1.0 mol L⁻¹ in NaCl) and characterised by thermoanalysis and elemental analysis.     

Hetero dimer from tetrakisammonium cavitand and tetratopic crown ether cavitand

Hetero dimer between tetrakis(m-ammonium)cavitand and tetrakis(dibenzo-25-crown-8)cavitand 5 was formed in CDCl₃ at room temperature. The effects of solvent polarity and temperature on the stability of were studied and the thermodynamic parameters for the formation of are , ΔH⁰ = −67.4 kcal mol⁻¹ and ΔS⁰ = −201.6 cal mol⁻¹ K⁻¹.     

Thermodynamic properties of lithium mica: Lepidolite

Calorimetric measurements were made on natural sample of lepidolite having the composition (K_0.80Na_0.05Ca_0.07Rb_0.16Cs_0.03)(Li_1.34Al_1.40Fe³⁺_0.01)[Si_3.25Al_0.75O₁₀]F_1.80(OH)_0.20 from Na-Li-type rare-element-rich pegmatites of East Sayany, Russia. High-temperature enthalpy increments were measured with a Tian-Calvet calorimeter at 444-972 K using the drop method. The resultant (T) equation in the interval T = 298.15-972 K was calculated:  = 316.10 + 228.12 × 10⁻³ T − 50.10 × 10⁵ T⁻² (J K⁻¹ mol⁻¹) [± 0.4%] and the value of (298.15 K) = 327.8 J K⁻¹ mol⁻¹ was obtained. The standard molar enthalpy of formation from the elements was determined by high-temperature drop solution calorimetry in molten lead borate at T = 973 K. The value of Δ_f(298.15 K) for lepidolite was found to be −6201 ± 18 kJ mol⁻¹. The thermodynamic properties of lepidolite of idealized composition KLi_1.5Al_1.5[Si₃AlO₁₀]F₂ were estimated based on the experimental data obtained.     

Reactions of pyridyl donors with halogens and interhalogens: an X-ray diffraction and FT-Raman investigation

Three different N-donors L, namely N-ethyl-N′-3-pyridyl-imidazolidine-4,5-dione-2-thione (1), N,N′-bis(3-pyridylmethyl)-imidazolidine-4,5-dione-2-thione (2), and tetra-2-pyridyl-pyrazine (3), bearing one, two and four pyridyl substituents, respectively, have been reacted with halogens X₂ (X = Br, I) or interhalogens XY (X = I; Y = Cl, Br). CT σ-adducts L · nXY, bearing linear N?XY moieties (L = 3; X = I; Y = Br, I; n = 2), and salts containing the protonated cationic donors H_nLⁿ⁺ (L = 1 − 3; n = 1, 2, 4), counterbalanced by Cl⁻, Br⁻, , , , , I₂Br⁻, , or anions, have been isolated. Among the reactions products, (H1⁺)Cl⁻, (H1⁺)Br⁻, , , and 3 · 2IBr have been characterised by single-crystal X-ray diffraction. The nature of the products has been elucidated based on elemental analysis and FT-Raman spectroscopy supported by MP2 and DFT calculations.     

Standard enthalpy of formation of aqueous titanyl chloride, TiOCl2(aq), at T = 298.15 K

Enthalpies of solution of TiCl₄(l) in aqueous perchloric acid have been measured in an isothermal calorimeter at T = 298.15 K at ionic strengths of (1.964, 3.002, and 4.062) mol · kg⁻¹. These results were extrapolated to zero ionic strength using an extended Debye-Hückel equation, to yield the standard enthalpy of solution ; from which the standard partial molar enthalpy of formation of the titanyl ion was derived: .     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Enthalpies of dilution of aqueous Li2B4O7 solutions at 298.15 K and application of ion-interaction model

The enthalpies of dilution have been measured for aqueous Li₂B₄O₇ solutions from 0.0212 to 2.1530 mol kg⁻¹ at 298.15 K. The relative apparent molar enthalpies, L_?, and relative partial molar enthalpies of the solvent and solute, and were calculated. The thermodynamic properties of the complex aqueous solutions were represented with a modified Pitzer ion-interaction model.     

Thermoanalytical study of linkage isomerism in coordination compounds: Part I. Reinvestigation of thermodynamic and thermokinetic of solid state interconversion of nitrito (ONO) and nitro (NO2) isomers of pentaaminecobalt(III) chloride by means of DSC

Solid state thermal isomerization of [Co(NH₃)₅(ONO)]Cl₂ (nitrito isomer) to [Co(NH₃)₅(NO₂)]Cl₂ (nitro isomer) and reverse reaction were investigated by non-isothermal differential scanning calorimetry (DSC) and found to be essentially an equilibrium process. The interconversions are accelerated at above 65 °C and reach to equilibrium state at about 155 °C. After establishment of the equilibrium the relative amounts of two isomers at any temperature are governed by Gibbs free energy relationship. The experimental enthalpy changes of isomerization of pure nitrito and nitro solid samples to the equilibrium state are −4.67 (±0.19) and 0.99 (±0.05) kJ mol⁻¹, respectively. From these values, total enthalpy change was calculated as: ΔH°=−5.66(±0.20) kJ mol⁻¹. Using Gibbs free energy relationship, equilibrium constant, total free energy and entropy changes were estimated at 60 °C as: K=7.72(±0.8),  kJ mol⁻¹ and  J K⁻¹ mol⁻¹.An initial rate method has been developed to determine the kinetic parameters of these reactions from non-isothermal DSC data. Both nitro to nitrito and reverse reactions obey first order kinetic law in solid state. Estimated activation parameters of forward and reverse paths at 60 °C are , , and , respectively. The negative activation entropy of both directions support the intramolecular mechanism of isomerization, including formation of a seven coordinate transition state, which formerly suggested based on spectral and X-ray methods.