Elastomeric polyurethanes modified with geminal bisphosphonate groups

Three types of elastomeric segmented polyurethanes represented by a polyether‐urethane, a polyurethane‐urea, and a polycarbonate‐urethane were introduced into a modified low‐temperature variant of base‐induced N‐alkylation of urethane hard segments with an excess of 1,6‐dibromohexane in N,N′‐dimethylacetamide (DMAc), resulting in the modification of polymers with 0.08–0.26 mmol/g of pendant 6‐bromohexyl groups. Either lithium diisopropylamide (LDA) or sodium hydride was used to initiate the reaction, although LDA was found to be more suitable for the bromoalkylation. Selected bromoalkylated polyurethanes of all three types were reacted with thiol‐containing bisphosphonates, to yield the polymers modified with 0.08–0.12 mmol/g of geminal nonesterified covalently attached bisphosphonate groups. Two thiol‐containing geminal bisphosphonates used in the modifications were prepared via reactions of nucleophilic addition to vinylidene‐bisphosphonic acid. All three types of polyurethanes were found equally suitable for the modifications. The bisphosphonate‐modified polyurethanes with nonmetallic cations on the bisphosphonate groups remain soluble in the solvents suitable for the dissolution of nonmodified polymers and can be processed into films by solvent casting. After the exchange of nonmetallic cations to sodium, the polymers become insoluble in any solvent, probably as a result of the intermolecular coordination of bisphosphonate groups with the metal cations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 105–116, 2001     

Nitrile Containing Bisphosphonates: Easy Synthesis through Metal Catalyzed Michael Addition

New nitrile‐containing gem‐bisphosphonates as drug candidates for the contrast of osteoporosis are presented, their synthesis being based on the metal catalyzed Michael conjugate addition of trimethylsilyl cyanide to unsaturated bisphosphonate precursors. Zn(OT f)₂ turned out to be the most efficient metal catalyst for the reaction enabling the formation of β‐nitrile substituted bisphosphonates in good yields. The corresponding final bisphosphonic acids bearing the nitrile moiety were obtained by deprotection of the ethyl ester moiety. They showed aggregation properties in water due to their amphiphilic nature and will be evaluated in order to assess their biological anti‐osteoclast activity.     

Anion-exchange separation and determination of bisphosphonates and related analytes by post-column indirect fluorescence detection

Bisphosphonic acids and their salts can be detected after their liquid chromatographic separation by post-column indirect fluorescence detection (IFD). After separation the analyte is combined with the highly fluorescent Al³⁺–morin (2′,3,4′,5,7-pentahydroxyflavone) solution and fluorescence decreases because of the formation of the nonfluorescent Al³⁺–bisphosphonate complex. The decrease in fluorescence is proportional to the amount of bisphosphonate present. Separation of the multivalent anionic bisphosphonate analytes from other anions and sample matrix is achieved on a strong base anion-exchange column with a strong, basic eluent. The post-column reaction variables, which influence IFD, are identified and optimized for the detection of the bisphosphonates after separation on the anion exchanger. The method is selective, since only a few anions will undergo a reaction with the Al³⁺–morin solution, and sensitive, detection limit for difluoromethylene bisphosphonate, F₂MDP, is 4 ng for S/N=3. The separation–IFD method can be applied to the determination of bisphosphonates, such as F₂MDP, ethane-1-hydroxy-1,1-bisphosphonic acid, dichloromethylene bisphosphonic acid, 4-amino-1-hydroxybutane-1,1-bisphosphonic acid, in biological samples. The separation–IFD method is also applicable to the detection of inositol phosphate anions.     

Monitoring bisphosphonate surface functionalization and acid stability of hierarchically porous titanium zirconium oxides

To take advantage of the full potential of functionalized transition metal oxides, a well-understood nonsilane based grafting technique is required. The functionalization of mixed titanium zirconium oxides was studied in detail using a bisphosphonic acid, featuring two phosphonic acid groups with high surface affinity. The bisphosphonic acid employed was coupled to a UV active benzamide moiety in order to track the progress of the surface functionalization in situ. Using different material compositions, altering the pH environment, and looking at various annealing conditions, key features of the functionalization process were identified that consequently will allow for intelligent material design. Loading with bisphosphonic acid was highest on supports calcined at 650 °C compared to lower calcination temperatures: A maximum capacity of 0.13 mmol g(-1) was obtained and the adsorption process could be modeled with a pseudo-second-order rate relationship. Heating at 650 °C resulted in a phase transition of the mixed binary oxide to a ternary oxide, titanium zirconium oxide in the srilankite phase. This phase transition was crucial in order to achieve high loading of the bisphosphonic acid and enhanced chemical stability in highly acidic solutions. Due to the inert nature of phosphorus-oxygen-metal bonds, materials functionalized by bisphosphonic acids showed increased chemical stability compared to their nonfunctionalized counterparts in harshly acidic solutions. Leaching studies showed that the acid stability of the functionalized material was improved with a partially crystalline srilankite phase. The materials were characterized using nitrogen sorption, X-ray powder diffraction, and UV-vis spectroscopy; X-ray photoelectron spectroscopy was used to study surface coverage with the bisphosphonic acid molecules.     

The Synthesis and Evaluation of Quaternary Pyridinium Bisphosphonates as Potent Anti-Resorptives

Abstract

Several novel quaternary pyridinium bisphosphonates have been synthesised and their efficacy as potential anti-resorptive bone agents have been tested in Dictyostelium discoideum. This assay has been shown to accurately reflect the potency of a bisphosphonic acid as an anti-resorptive compound. All the quaternary bisphosphonates are very potent growth inhibitors but results indicate that the more potent compounds are those containing hydrophobic, bulky groups.     

Highly enantioselective approach to geminal bisphosphonates by organocatalyzed Michael-type addition of beta-ketoesters

A valuable organocatalyzed protocol has been developed for the asymmetric synthesis of bisphosphonate derivatives, a class of pharmaceutically important molecules. Cheap and commercially available dihydroquinine effectively catalyzed conjugate additions of cyclic beta-ketoesters to ethylidenebisphosphonate esters, leading to optically active geminal bisphosphonates, bearing an all-carbon substituted quaternary stereocenter, in high yields and enantioselectivities of up to 99 % ee. Further elaborations of Michael adducts to the corresponding bisphosphonic acids or vinyl phosphonates have also been successfully performed, with conservation of optical purity.     

Synthesis of New Tetraethyl(N-alkyl-1-aminoethan-1,1-diyl)bisphosphona-tes and ESR Analysis of Chemical Exchange of Derived Nitroxides of Acyclic Aminobisphosphonates

The synthesis and the full characterization of two new linear bisphosphonates (tetraethyl(N-tert-butyl-1-aminoethan-1,1-diyl)bisphosphonate and tetraethyl(N-sec-butyl-1-aminoethan-1,1-diyl)bisphosphonate), and the first analysis of the ESR spectra of the corresponding nitroxides is reported. The preliminary results of theoretical calculations on model compounds suggest a small B₀ (in the McConnell equation). The results of bisphosphonate ester and bisphosphonic acid are similar. The discrepancies of P coupling for the diphosphorus compound stems from B₂ that is different when the dihedral angle is larger than 90°.     

Dialkyl bisphosphonate platinum(II) complex as a potential drug for metastatic bone tumor

Bisphosphonates have high affinity for hydroxyapatite (HA), which is abundantly present in bone. Also, platinum complexes are known that have a wide spectrum of antitumor activities. The conjugate of bisphosphonate and a platinum complex might have HA affinity and antitumor activity, and become a drug for metastatic bone tumor. In this study, the authors synthesized platinum complexes that had dialkyl bisphosphonic acid as a ligand, and evaluated the possibility of the synthesized complexes as a drug for metastatic bone tumor. The synthesized dialkyl bisphosphonate platinum(II) complex was characterized, and its stability in an aqueous solution was also confirmed. The synthesized platinum complex showed higher HA affinity than other platinum complexes such as cisplatin and carboplatin in an experiment of adsorption to HA. In vitro, the platinum complex showed tumor growth inhibitory effect stronger than or equal to cisplatin, which is the most commonly used antitumor agent. Moreover, the platinum complex showed a bone absorption inhibitory effect on the osteoclast. These results suggest potential of dialkyl bisphosphonate platinum(II) complexes as a drug for metastatic bone tumor.     

Electrospray ionization mass spectrometry and tandem mass spectrometry of clodronate and related bisphosphonate and phosphonate compounds

The bisphosphonate family with a P-C-P structure is a broad class of drugs, widely investigated as potential inhibitors in bone diseases and calcium metabolic disorders. In this study, the mass spectrometric (MS) behavior and fragmentation of clodronate and related bisphosphonate and phosphonate compounds was studied by using negative ion electrospray ionization (ESI) with triple quadrupole and ion trap instruments. The effect of pH on the degree of deprotonation of the polyprotic bisphosphonic and phosphonic acids in negative ion ESI-MS was investigated, and the degree of deprotonation in the ESI mass spectra and the dissociation in the liquid phase were compared. The results provide evidence that the measured ESI mass spectra do not correlate with the chemistry in the liquid phase owing to the decrease in the pH of the solvent droplets during the ion evaporation process and the charge state neutralization in the gas phase. Ion trap MS(n) provided useful information on the fragmentation study of clodronate and related bisphosphonate and phosphonate compounds, in which interesting fragmentation pathways including the direct elimination of carbon monoxide from deprotonated bisphosphonates and formation of a P-P bond were observed. Reactions between the product ions with a -PO(2) group and residual water in the ion trap or in the high-pressure region of the triple quadrupole instrument formed other unexpected fragmentation paths for all the bisphosphonates studied.     

Synthesis of tetraethyl (2-benzyl-3-oxoisoindolyl-1,1-diyl)-bisphosphonate and its properties

The reaction of o-phthalyl chloride with sodium diethylphosphite affords a cyclic bisphosphonate, 3,3-bis(diethylphosphono)-1(3H)-isobenzofuranone. The reaction of 1(3H)-isobenzofuranone with potassium carbonate proceeds through the ring opening and elimination of one phosphonate group to give acyclic α-ketophosphonate. At the same time, the reaction of bisphosphonate with the concentrated hydrochloric acid does not lead to the ring opening but gives bisphosphonic acid in a good yield. 3,3-Bis(diethylphosphono)-1(3H)-isobenzofuranone reacts with benzylamine in the presence of triethylamine with the replacement of endocyclic oxygen atom by benzylamino group, which leads to the formation of the corresponding bisphosphonate phthalimide, the first representative of a new type of bisphosphonates and phosphorus heterocycles.     

Novel Bisphosphonates Derived from 1H‐Indazole, 1H‐Pyrazolo[3,4‐b]Pyridine,and 1H‐Pyrazolo[3,4‐b]Quinoline

Novel tetraethyl ethylene‐1,1‐bisphosphonate esters derived from 1H‐indazole, 1H‐pyrazolo[3,4‐b]pyridine, and 1H‐pyrazolo[3,4‐b]quinoline were synthesized by a Michael addition reaction of tetraethyl ethylidene‐1,1‐bisphosphonate with the corresponding heterocycle, using conventional heating and microwave‐assisted methods. The microwave‐assisted method provides shorter reaction times and better yields. The hydrolysis of bisphosphonates afforded the corresponding bisphosphonic acids or salt, using concentrated hydrochloric acid or TMSBr/collidine, respectively. All new compounds were fully characterized, and their structures were assigned using ¹H, ³¹P, and ¹³C NMR and IR spectroscopies and mass spectrometry. The molecular structure of compound 6 was confirmed by X‐ray diffraction studies.     

Synthesis of functionalized alkoxyalkylidene gem-bisphosphonates

We report the synthesis of a series of new functionalized bisphosphonates and bisphosphonic acids with an alkoxy group fixed at the geminal carbon, which is proposed to increase their lipophilicity and so their bioavailability. Subsequently, the alkylation of these alkoxy bisphosphonates with allyl bromide is reported. The reactivity of the allyl group has been studied to give access to alkoxy bisphosphonates functionalized by diverse groups including alcohol, aldehyde, carboxylic acid, epoxide and amine.     

Synthesis of peptide conjugated chelator oligomers for endoradiotherapy and MRT imaging

The clinical impact of peptides that accumulate in tumours is determined by the number of particle emitting or paramagnetic isotopes attached. Therefore, attempts should be made to increase the cargo capacity of the peptide carriers. A general synthetic route to conjugates is described that allows insertion of multiple DOTA (1,4,7,10-tetraazacyclododecane-N′,N″,N^?,N?-tetraacetic acid) moieties at the N-terminal end of the cyclic peptide Tyr³-octreotate. The peptide moiety was assembled by Fmoc solid phase synthesis and oxidised to form the cyclic disulfide. Subsequently, the required number of DOTA-tris tert-butyl ester chelating units were attached to the side chains of lysines. The conjugates were purified and thoroughly studied by RP-HPLC, size exclusion HPLC and mass spectrometry. The labelling of the novel conjugates and of DOTA⁰-Tyr³-octreotate (DOTATATE) was exemplified for ⁹⁰Y and ¹¹¹In. The methodology described here allows the versatile introduction of multiple DOTA chelates into a peptide sequence, thus, introducing a new scope to the receptor affine peptides that can be synthesised using solid phase synthesis.     

Modified expanded corrole-ferrocene conjugates: syntheses, structure and properties

Syntheses, characterization and properties of expanded corrole-ferrocene conjugates are reported. Ferrocenyl group are covalently linked to the corrole macrocycle through three different spacers groups. The synthetic strategy involved prior insertion of ferrocene with spacers to the dipyrromethane unit followed by a "3+2" acid-catalyzed oxidative coupling methodology. The optical and emission data of the expanded corrole-ferrocene conjugates depend on the nature and length of the spacer groups and the maximum effects are seen where ferrocene is directly linked to the meso carbon of macrocycle. The single crystal X-ray structure of two expanded corrole-ferrocene conjugates; [22]pentaphyrin (1.1.0.1.0) with different meso substituents, clearly reveal shortening of the C-C bond length linking the meso carbon and the aryl substituent containing the ferrocene moiety relative to meso aryl substituents without ferrocene. The results suggest that an electronic interaction between the two pi systems. Electrochemical data reveal harder oxidation for the ferrocene unit in the conjugates relative to free ferrocene; this suggests the electron donating nature of the ferrocene. The first corrole ring oxidation shows easier oxidation relative to 1 and the magnitude of shifts in potential is inversely proportional to the length of spacer. The molecular first hyperpolarizabilities (beta) measured at 1064 nm by HRS method vary in the range 20-32x10(-30) esu and imply that the beta values can be increased by enhancing the number of mobile electrons in the conjugation. The conjugates form 1:1 metal complex with the Rh(I) where rhodium is coordinated to one amino and one imino nitrogen of the dipyrromethane unit.     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

Cellular internalization of targeted and non-targeted delivery systems for contrast agents based on polyamidoamine dendrimers

New high-molecular-weight contrast agents based on polyamidoamine (PAMAM) dendrimers for targeted imaging of malignant tumors characterized by overexpression of human epidermal growth factor receptor (EGFR) and human alpha-fetoprotein receptor (RECAF) were designed. Conjugates of second (G2) and third (G3) generation polyamidoamine dendrimers with 1,4,7,10-tetraazocyclodecane-1,4,7,10-tetraacetic acid (DOTA) were obtained. The quantitative composition of the conjugates was determined by ¹HNMR spectroscopy. It was shown that four out of the 16 terminal NH₂ groups in G2-DOTA and nine out of the 32 groups in G3-DOTA were modified with DOTA. The morphology, size, and charge of the synthesized macromolecules were characterized by dynamic light scattering and electrophoresis. Gadolinium(III) was loaded into the conjugates and the Gd content was determined by atomic emission spectroscopy. For increasing the selectivity of accumulation in the tumor cells, two recombinant proteins able to bind selectively to EGFR and RECAF, namely, human recombinant epidermal growth factor (rEGF) and human recombinant 3rd domain of alpha-fetoprotein (3dAFPpG), were conjugated with G2 and G3 dendrimers. The conjugates containing vector molecules were mainly accumulated via clathrin-dependent endocytosis, whereas G2-DOTA and G3-DOTA were absorbed via caveolin-dependent endocytosis and macropinocytosis. The dendrimer conjugates with vector molecules were intensely accumulated in A549 cells characterized by high expression of EGFR (Herl) and RECAF, whereas the accumulation of conjugates in the control K562 cells (with low expression of Her1) and in the CD14^? population of human unstimulated mononuclear white blood cells was insignificant. The 3dAFPpG-conjugated dendrimers were partly recycled. All synthesized conjugates had a rather low toxicity in the range of 350–450 µmol L^?1 (IC₅₀).

     

Positive mode electrospray ionization mass spectrometry of bisphosphonates using dicationic and tricationic ion-pairing agents

A general method for detecting bisphosphonate drugs by ESI-MS and LC-ESI-MS as positive ions has been developed. Bisphosphonates can have multiple negative charges in solution. Tricationic ion-pairing reagents were paired with bisphosphonates to form a positively charged complex. It was clear that this facile pairing method worked. However, an appreciable presence of −1 bisphosphonate species were observed in positive mode ESI-MS (i.e. as the +2 complex with tricationic reagents). This led to an extended investigation on the use of dicationic pairing agents. The use of dicationic reagents improved the detection sensitivity for all of the bisphosphonates. Tandem mass spectrometry also improved the limits of detection for most of the bisphosphonates using both the tricationic and dicationic pairing reagents. A tricationic reagent also was used as an ion-pairing reagent in chromatography experiments. Thus the addition of a single reagent produced benefits in that it increased chromatographic retention and enhanced the ESI-MS detection of bisphosphonates.     

Liquid crystalline copolymers containing electron donor and acceptor mesogens with a chiral group in the spacer unit

Side-chain liquid crystalline polymers containing both mesogenic (carbazolylmethylene)aniline and (4′-nitrobenzylidene)aniline units with various spacer groups were prepared to examine effects of the structure of spacer groups on the liquid crystalline properties. The copolymer containing (R)-(+)-2-methylpropylene as a chiral group in the spacer unit induced a smectic phase; the copolymer with a trimethylene spacer of similar length to the chiral spacer exhibited a nematic phase. Smectic phases were observed for the copolymer containing the chiral spacer group when the proportion of the carbazolyl group was in the range of 0.55–0.88. For example, the copolymer with the proportion of the carbazolyl group of 0.68 expressed the smectic phase from 88° to 167°C. This isotropic temperature was 37° higher than the calculated value (130°C) based on an assumed copolymer composition without the electron donor–acceptor interaction. Thus, it is assumed that for the chiral copolymer containing both electron donor and acceptor groups, the thermal stability and the induction of the smectic phase were caused by both the electron donor–acceptor interaction and the existence of the chiral group in the spacer unit. © 1995 John Wiley & Sons, Inc.     

Modification of Amorphous Mesoporous Zirconia Nanoparticles with Bisphosphonic Acids: A Straightforward Approach for Tailoring the Surface Properties of the Nanoparticles

The use of readily prepared bisphosphonic acids obtained in few steps through a thio-Michael addition of commercially available thiols on tetraethyl vinylidenebisphosphonate enables the straightforward surface modification of amorphous mesoporous zirconia nanoparticles. Simple stirring of the zirconia nanoparticles in a buffered aqueous solution of the proper bisphosphonic acid leads to the surface functionalization of the nanoparticles with different kinds of functional groups, charge and hydrophobic properties. Formation of both chemisorbed and physisorbed layers of the bisphosphonic acid take place, observing after extensive washing a grafting density of 1.1 molecules/nm² with negligible release in neutral or acidic pH conditions, demonstrating stronger loading compared to monophosphonate derivatives. The modified nanoparticles were characterized by IR, XPS, ζ-potential analysis to investigate the loading of the bisphosphonic acid, FE-SEM to investigate the size and morphologies of the nanoparticles and ³¹P and ¹H MAS NMR to investigate the coordination motif of the phosphonate units on the surface. All these analytical techniques demonstrated the strong affinity of the bisphosphonic moiety for the Zr(IV) metal centers. The functionalization with bisphosphonic acids represents a straightforward covalent approach for tailoring the superficial properties of zirconia nanoparticles, much straightforward compared the classic use of trisalkoxysilane or trichlorosilane reagents typically employed for the functionalization of silica and metal oxide nanoparticles. Extension of the use of bisphosphonates to other metal oxide nanoparticles is advisable.